Optimization of short-circuit transition parameters of Q235B steel GMAW based on orthogonal gray relational analysis

In gas metal arc welding(GMAW)process,the short-circuit transition was the most typical transition observed in molten metal droplets.This paper used orthogonal tests to explore the coupling effect law of welding process parameters on the quality of weld forming under short-circuit transition,the design of 3 factors and 3 levels of a total of 9 groups of orthogonal tests,welding current,welding voltage,welding speed as input parameters:effective area ratio,humps,actual linear power density,aspect ratio,Vickers hardness as output paramet-ers(response targets).Using range analysis and trend charts,we can visually depict the relationship between input parameters and a single output parameter,ultimately determining the optimal process parameters that impact the single output index.Then combined with gray the-ory to transform the three response targets into a single gray relational grade(GRG)for analysis,the optimal combination of the weld mor-phology parameters as follows:welding current 100 A,welding voltage 25 V,welding speed 30 cm/min.Finally,validation experiments were conducted,and the results showed that the error between the gray relational grade and the predicted value was 2.74%.It was observed that the effective area ratio of the response target significantly improved,validating the reliability of the orthogonal gray relational method.

Program evaluation and its application to equipment based on super-efficiency DEA and gray relation projection method

For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the super-data envelopment analysis（DEA） model and the gray system theory, a new super-DEA for measuring the weight is proposed, and a gray relation projection model is established to rank the equipment programs. Finally, this approach is used to evaluate the equipment program. The results are verified valid and can provide a new way for evaluating the equipment program.

Applications of gray relational analysis in gastroenterology

ABM: To introduce the basic methods of gray relational analysis (GRA) and to illustrate its applications in gastroenterology. METHODS: With the essential formulae of GRA and several typically practical examples, the procedure of GRA was introduced. Examples were drawn from the gastroenterological studies. Thus the trait of GRA could be demonstrated. RESULTS: The superiority of GRA in gastroenterological study was proved by the examples. CONCLUSION: GRA can be applied mechanically or flexibly in gastroenterology.

Evaluation of Development Level of New Four Modernizations Based on Gray Relational Model——A Case Study of 14 Cities in Hunan Province

The development level of industrialization,informationization,urbanization and agricultural modernization(New Four Modernizations) is an important indicator for evaluation of regional economic development.In this paper,an indicator system was designed for evaluation of the development level of New Four Modernizations according to the interaction mechanism between them.It introduced the data related to New Four Modernizations of 14 cities in Hunan Province during 2004 and 2012,and made a comprehensive analysis of the development level of New Four Modernizations in these cities by entropy-gray relational method.It found that the development level of New Four Modernizations in 14 cities in Hunan Province was extremely uneven,and the stronger would become stronger,while the weaker would become weaker,like Matthew effect.Thus,it is required to straighten out the development idea,carry out reform and innovation in the mechanism construction,urbanrural integration,interaction and integration,and regional coordination,to promote simultaneous development of New Four Modernizations.

Partner Selection Analysis and System Development Based on Gray Relation Analysis for an Agile Virtual Enterprise

This paper analyzes the state of the art of partner selection and enumerates the advantage of partner selection based on gray relation analysis comparing to the other algorithms of the partner selection. Furthermore, partner selection system based on gray relation for an Agile Virtual Enterprise（AVE） is analyzed and designed based on the definition and characteristics of the AVE. According to J2EE mode, the architecture of the partner selection system is put forward and the system is developed t^ing JSP, EJB and SQL Server. The paper lays emphasis on a gray relational mathematic model, AVE evaluation infrastructure, a core algorithm of partner selection and a multi-layer gray relation selection process.

Evaluation of microstructure and mechanical properties of squeeze overcast Al7075-Cu composite joints

Al7075-Cu composite joints were prepared by the squeeze overcast process.The effects of melt temperature,die temperature,and squeeze pressure on hardness and ultimate tensile strength(UTS)of squeeze overcast Al7075-Cu composite joints were studied.The experimental results depict that squeeze pressure is the most significant process parameter affecting the hardness and UTS.The optimal values of UTS(48 MPa)and hardness(76 HRB)are achieved at a melt temperature of 800℃,a die temperature of 250℃,and a squeeze pressure of 90 MPa.Scanning electron microscopy(SEM)shows that fractured surfaces show flatfaced morphology at the optimal experimental condition.Energy-dispersive spectroscopy(EDS)analysis depicts that the atomic weight percentage of Zn decreases with an increase in melt temperature and squeeze pressure.The optimal mechanical properties of the Al7075-Cu overcast joint were achieved at the Al2Cu eutectic phase due to the large number of copper atoms that dispersed into the aluminum melt during the solidification process and the formation of strong intermetallic bonds.Gray relational analysis integrated with the Taguchi method was used to develop an optimal set of control variables for multi-response parametric optimization.Confirmatory tests were performed to validate the effectiveness of the employed technique.The manufacturing of squeeze overcast Al7075-Cu composite joints at optimal process parameters delivers a great indication to acknowledge a new method for foundry practitioners to manufacture materials with superior mechanical properties.

Physiological Changes in Leaves of Medicago falcata Under Low-Temperature Stress

Low temperature significantly restricts crop yield and quality.Medicago falcata(M.falcata)is a typical legume species that exhibits great capacity of tolerance to low temperature.To understand the low-temperature responses in M.falcata,the electrolyte leakage and lipid peroxidation level,and activities of superoxide dismutase(SOD),catalase(CAT)and peroxidase(POD),and contents of reduced glutathione(GSH),soluble protein,soluble sugar and proline were investigated in low-temperature-stressed M.falcata leaves.The electrolyte leakage and malondialdehyde(MDA)content increased,and could be used to quantify low-temperature damage at cellular level.And then,the significant change of SOD,POD and CAT activities,and GSH content reflected the higher reactive oxygen species(ROS)scavenging capacity in M.falcata.In addition,the significant change of soluble protein,soluble sugar and proline contents helped to maintain osmotic equilibrium,energy supply and protein functions.These nine physiological traits were analyzed by gray relational grade analysis and ranked from the highest to the lowest as follows:electrolyte leakage,GSH,proline,soluble protein,MDA,soluble sugar,SOD,CAT and POD,and illustrated that the electrolyte leakage level,GSH and proline contents should be selected and measured priority in M.falcata low-temperature tolerance to improve measurement efficiency.

Assessment on the Water Resources Carrying Capacity in Karst Area Based on the Cosine Vector Included Angle

[Objective] The research aimed to assess the water resources carrying capacity in Guizhou Province based on the cosine vector included angle method. [Method] By using the cosine vector included angle method, the index weight was determined. The projection value of water resources carrying capacity in Guizhou Province was counted by using the multi-objective gray relational projection method. Moreover, the projection value which was counted by the index weight determined by the mean-variance method was as the control. [Result] The projection values which were obtained by two kinds of methods were very close, and the ordering result was consistent. [Conclusion] In the assessment of water resources carrying capacity, it was feasible to use the cosine vector included angle method to determine the index weight.

Influential Factors of Water Productivity of Maize in Oasis of Arid Areas——A Case Study of Linze County

[Objective] The aim was to research influential factors of water productivity of maize in oasis in arid areas. [Method] In middle reach of Heihe River in Linze County of Zhangye City, maize, a major crop in irrigated area in the oasis, was studied and nine influential factors were chosen through grey relation analysis. [Result] According to grey relation analysis, top five factors influencing water produc- tivity of maize during 1995-2009 were as follows： applied quantity of chemical fertil- izers〉labour input〉seeds〉mulch amount〉pesticide amount, which indicated that controllable factors, instead of uncontrollable ones, dominate in influence of water productivity of maize in oasis in arid areas. [Conclusion] With water resource limited, investment of controllable factors in high-efficient agricultural production should be the major strategy to improve water productivity of maize in oasis of arid areas.

Study on Entropy Weight Coefficient Method and Application for Water Quality Evaluation

In order to evaluate the quality of water environment, the conception of entropy is applied in information science, and the entropy weight model is built to evaluate comprehensively water quality. The indexes weights of water quality are determined by value of entropy. This kind of method is applied on evaluating water quality in the new water to be built. The result shows that the water quality in it which supply water is between grade Ⅲ and Ⅳ, and the result is similar to that of gray related method.

Pore Size Distribution and Its Quantitative Relationship with Strength of Corundum Based Castables

A series of corundum based castables with 0,2%,4%,6%,and 8% α-Al2O3 micropowders were prepared using tabular alumina aggregates （6-3,3-1 and ≤1 mm） and fines （≤0.088 and ≤0.045 mm）,calcium aluminate cement,and α-Al2O3 micropowders （d50=1.754 μm） as starting materials. Cold mechanical strength and pore size distribution of the castables specimens after heat treatment at 110,1 100 and 1 500 ℃ were tested,respectively. The quantitative relationship between strength and apparent porosity,and that between strength and median pore diameter were verified by Atzeni equation. The correlation between interval of pore size and mechanical strength of specimens was also studied by means of gray relational theory. The results show that：（1） the pore size distribution of castables is strongly influenced by both micropowders filling and matrix sintering; the addition of micropowders decreases median pore diameter while the sintering process increases it; （2） when adding a constant correction term,Atzeni equation can substantially describe the quantitative relationship between median pore diameter and strength of castables specimens after heat treatment at the same temperature; the significant differences of the gray relational degree between the interval of pore size and castables strength are characterized; it is also found that for the same interval of pore size,the gray relational degree isaffected by the heat treatment temperature; the pore size interval 〈0.5 μm has the highest gray relational degree with the strength at 110-1 500 ℃.

Mineralogical properties and co-sintering characteristics of fluxed iron ore with magnetite concentrates

To investigate the feasibility of co-sintering of fluxed iron ore with magnetite concentrates, the mineralogical properties of a novel fluxed iron ore were studied using particle size analysis, microscopic morphology characterization, and X-ray diffraction Rietveld analysis. Following that, the experiments for granulation performance and basic sintering characteristics were designed under seven different fluxed iron ore ratios, and the integrated ranking of different fluxed iron ore ratios was determined using gray relation analysis. Finally, the results of the industrial trails were combined with the feasibility analysis. Test and experimental results show that the fraction of the fluxed iron ore particles larger than 0.5 mm can account for more than 48%, and the particles have two morphologies: spherical-rough and flaky-smooth. Ca elements are found in the form of calcite (CaCO3) and dolomite (CaMg(CO3)2). The average particle size of granules and powder removal rate can be improved from 2.50 to 3.16 mm and 39.60% to 24.20%, respectively, with the increase in the fluxed iron ore ratio. Furthermore, the fluxed iron ore can improve assimilability and liquid fluidity of magnetite concentrates. In terms of overall granulation performance and sintering characteristics, the fluxed iron ore ratios are graded from best to worst as follows: 12%, 15%, 9%, 18%, 21%, 6% and 3%. The industrial trails show that when the fluxed iron ore ratio is increased, the beneficial effect of the superior sintering characteristics of the fluxed iron ore itself is ideally balanced with the negative effect of the lower amount of additional CaO at 12% ratio, and thus, it is feasible to bring the fluxed iron ore into production at a level of roughly 12%.

Optimization of polyurethane-bonded thin overlay mixture designation for airport pavement

This research explored the application potential of PUM thin-overlay technology on airport rapid maintenance.The rapid curing process of polyurethane binder determines the limited time window for mixing and construction of polyurethane-bonded mixture(PUM),which presents significant difference with hot-mix asphalt(HMA)technology.Therefore,this research investigated and optimized the mix design of PUM for airport thin-overlay technology based on its thermosetting characteristics.First,limestone and basalt were comprehensively compared as an aggregate for PUM.Then,the effects of molding and curing conditions were studied in terms of mixing time,molding method,molding parameters and curing temperature.Statistical analysis was also conducted to evaluate the effects of gradation and particle size on PUM performances based on gray relational analysis(GRA),thus determining the key particle size to control PUM performances.Finally,the internal structural details of PUM were captured by X-ray CT scan test.The results demonstrated that it only took 12 hours to reach 75%of maximum strength at a curing temperature of 50°C,indicating an efficient curing process and in turn allowing short traffic delay.The internal structural details of PUM presented distribution of tiny pores with few connective voids,guaranteeing waterproof property and high strength.