SFGA-CPA: A Novel Screening Correlation Power Analysis Framework Based on Genetic Algorithm

Correlation power analysis(CPA)combined with genetic algorithms(GA)now achieves greater attack efficiency and can recover all subkeys simultaneously.However,two issues in GA-based CPA still need to be addressed:key degeneration and slow evolution within populations.These challenges significantly hinder key recovery efforts.This paper proposes a screening correlation power analysis framework combined with a genetic algorithm,named SFGA-CPA,to address these issues.SFGA-CPA introduces three operations designed to exploit CPA characteris-tics:propagative operation,constrained crossover,and constrained mutation.Firstly,the propagative operation accelerates population evolution by maximizing the number of correct bytes in each individual.Secondly,the constrained crossover and mutation operations effectively address key degeneration by preventing the compromise of correct bytes.Finally,an intelligent search method is proposed to identify optimal parameters,further improving attack efficiency.Experiments were conducted on both simulated environments and real power traces collected from the SAKURA-G platform.In the case of simulation,SFGA-CPA reduces the number of traces by 27.3%and 60%compared to CPA based on multiple screening methods(MS-CPA)and CPA based on simple GA method(SGA-CPA)when the success rate reaches 90%.Moreover,real experimental results on the SAKURA-G platform demonstrate that our approach outperforms other methods.

A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

Seismic response and correlation analysis of a pile-supported wharf to near-fault pulse-like ground motions

Earthquake investigations have shown that near-fault pulse-like(NF-P)ground motions have unique characteristics compared to near-fault non-pulse-like(NF-NP)and far-field(FF)ground motions.It is necessary to study the seismic response of pile-supported wharf(PSW)structures under NF-P ground motions.In this study,a three-dimensional finite element numerical model is created to simulate a PSW.By imparting three types of ground motion,the engineering demand parameters(EDPs)of PSW under NF-P ground motions were analyzed and compared,in which EDPs are the maximum displacement and bending moment of the piles.Twenty intensity measures(IMs)were selected to characterize the properties of ground motions.The correlation between IMs and EDPs was explored.The results show that the piles present larger displacement and bending moment under NF-P ground motions compared to NF-NP and FF ground motions.None of the IMs have a high correlation with EDPs under NF-P ground motions,and these IMs are more applicable to FF ground motions.The correlation coefficients between EDPs and IMs under three types of ground motion were obtained,which will provide a valuable reference for the seismic design of PSWs.

Cross-Project Software Defect Prediction Based on SMOTE and Deep Canonical Correlation Analysis

Cross-Project Defect Prediction(CPDP)is a method that utilizes historical data from other source projects to train predictive models for defect prediction in the target project.However,existing CPDP methods only consider linear correlations between features(indicators)of the source and target projects.These models are not capable of evaluating non-linear correlations between features when they exist,for example,when there are differences in data distributions between the source and target projects.As a result,the performance of such CPDP models is compromised.In this paper,this paper proposes a novel CPDP method based on Synthetic Minority Oversampling Technique(SMOTE)and Deep Canonical Correlation Analysis(DCCA),referred to as S-DCCA.Canonical Correlation Analysis(CCA)is employed to address the issue of non-linear correlations between features of the source and target projects.S-DCCA extends CCA by incorporating the MlpNet model for feature extraction from the dataset.The redundant features are then eliminated by maximizing the correlated feature subset using the CCA loss function.Finally,cross-project defect prediction is achieved through the application of the SMOTE data sampling technique.Area Under Curve(AUC)and F1 scores(F1)are used as evaluation metrics.This paper conducted experiments on 27 projects from four public datasets to validate the proposed method.The results demonstrate that,on average,our method outperforms all baseline approaches by at least 1.2%in AUC and 5.5%in F1 score.This indicates that the proposed method exhibits favorable performance characteristics.

Tongue image feature correlation analysis in benign lung nodules and lung cancer

Objective To analyze the differences in the correlation of tongue image indicators among patients with benign lung nodules and lung cancer.Methods From July 1;2020 to March 31;2022;clinical information of lung cancer patients and benign lung nodules patients was collected at the Oncology Department of Longhua Hos-pital Affiliated to Shanghai University of Traditional Chinese Medicine and the Physical Ex-amination Center of Shuguang Hospital Affiliated to Shanghai University of Traditional Chi-nese Medicine;respectively.We obtained tongue images from patients with benign lung nod-ules and lung cancer using the TFDA-1 digital tongue diagnosis instrument;and analyzed these images with the TDAS V2.0 software.The extracted indicators included color space pa-rameters in the Lab system for both the tongue body(TB)and tongue coating(TC)(TB/TC-L;TB/TC-a;and TB/TC-b);textural parameters[TB/TC-contrast(CON);TB/TC-angular second moment(ASM);TB/TC-entropy(ENT);and TB/TC-MEAN];as well as TC parameters(perAll and perPart).The bivariate correlation of TB and TC features was analyzed using Pearson’s or Spearman’s correlation analysis;and the overall correlation was analyzed using canonical correlation analysis(CCA).Results Samples from 307 patients with benign lung nodules and 276 lung cancer patients were included after excluding outliers and extreme values.Simple correlation analysis indi-cated that the correlation of TB-L with TC-L;TB-b with TC-b;and TB-b with perAll in lung cancer group was higher than that in benign nodules group.Moreover;the correlation of TB-a with TC-a;TB-a with perAll;and the texture parameters of the TB(TB-CON;TB-ASM;TB-ENT;and TB-MEAN)with the texture parameters of the TC(TC-CON;TC-ASM;TC-ENT;and TC-MEAN)in benign nodules group was higher than lung cancer group.CCA further demon-strated a strong correlation between the TB and TC parameters in lung cancer group;with the first and second pairs of typical variables in benign nodules and lung cancer groups indicat-ing correlation coefficients of 0.918 and 0.817(P<0.05);and 0.940 and 0.822(P<0.05);re-spectively.Conclusion Benign lung nodules and lung cancer patients exhibited differences in correla-tion in the L;a;and b values of the TB and TC;as well as the perAll value of the TC;and the texture parameters(TB/TC-CON;TB/TC-ASM;TB/TC-ENT;and TB/TC-MEAN)between the TB and TC.Additionally;there were differences in the overall correlation of the TB and TC be-tween the two groups.Objective tongue diagnosis indicators can effectively assist in the diag-nosis of benign lung nodules and lung cancer;thereby providing a scientific basis for the ear-ly detection;diagnosis;and treatment of lung cancer.

Correlation analysis of human papillomavirus E6/E7 mRNA detection with diagnosis,prognosis and recurrence risk in patients with cervical epithelioma

BACKGROUND Cervical intraepithelial neoplasia(CIN)is an important precursor of cervical cancer.Early detection and treatment can reduce the incidence of cervical cancer.AIM To investigate the detection rate of human papillomavirus(HPV)E6/E7 mRNA in cervical tissue of patients with different types of epithelial cell neoplasia(CIN)and its relationship with CIN progression and diagnosis.METHODS One hundred women with HPV infection detected by cervical exfoliation cytology between January 2022 and January 2023 were retrospectively selected.These patients were graded CIN based on colposcopy and cervical pathology.The positive expression rates of HPV E6/E7 mRNA and HPV[polymerase chain reaction(PCR)-reverse dot crossing]were compared among all groups.Patients with HPV E6/E7 mRNA expression in the grade 1 CIN group were followed up for 1 yr.The relationship between atypical squamous epithelium and high malignant epithelial neoplasia was investigated by univariate and multivariate analysis.RESULTS The diagnostic sensitivity,specificity,and sensitivity of PCR-reverse point hybrid ization technology for secondary CIN were 70.41%,70.66%,and 0.714,respectively.Sensitivity and specificity for secondary CIN were 752%and 7853%,respectively,the area under the curve value was 0.789.Logistic Multifactorial model analysis revealed that the HPV positive rates and the HPV E6/E7 mRNA positive rates were independent risk factors of CIN grade I(P<0.05).In CIN grade I patients with positive for HPV E6/E7 mRNA,in its orientation to grade CIN patients,in its orientation to grade CIN patients,at 69.2%,compared with patients negative for HPV E6/E7 mRNA(30.8%),significant difference(P<0.05).CONCLUSION HPV E6/E7 mRNA and HPV(PCR-reverse dot hybrid)positive expression have a close relationship with CINgrade disease progression and is an independent risk factor for high-grade CIN lesions.

Correlation Analysis between Well-cellar Early Transplanting of Robust Seedlings and Diseases in Shiyan Tobacco-growing Area

[Objectives]The paper was to investigate the relationship between the well-cellar early transplanting of robust seedlings and the prevalence of diseases in the Shiyan tobacco-growing area.[Methods]The relationship between disease occurrence and meteorological factors during the field growth period was examined by analyzing the prevalence of flue-cured tobacco virus diseases,brown spot,and total disease in the Shiyan tobacco-growing area before(2013-2017)and after(2018-2022)the well-cellar early transplanting of robust tobacco seedlings.[Results]The implementation of a well-cellar early transplanting technique of robust seedlings resulted in a reduction in the average incidence of tobacco virus disease,brown spot,and total disease by 0.83%,8.85%,and 7.91%,respectively,in comparison to the incidence observed prior to early transplanting.These findings suggest that early transplanting can significantly reduce the incidence of flue-cured tobacco diseases.Prior to the well-cellar early transplanting of robust tobacco seedlings,there was a significant(including highly significant)positive correlation between the incidence of brown spot and total disease and precipitation in August and September.The incidence of brown spot and total disease in tobacco plants was found to be significantly positively correlated with May precipitation and significantly negatively correlated with May sunshine hours following the well-cellar early transplanting of robust seedlings.The advancement of the transplanting period by 20 d resulted in a reduction in the growing period of tobacco plants in the field under autumn rains(late August to November)in western China.This effectively circumvented the suitable conditions for disease occurrence and can reduce the incidence of disease.[Conclusions]This study offers a framework for enhancing the quality and efficiency of flue-cured tobacco production in the northwest tobacco-growing area of Hubei.

Correlation Analysis Between Changes of D-Dimer Level and Rheumatoid Arthritis Complicated with Interstitial Lung Disease

Objective:To explore the correlation between the change of D-dimer level and rheumatoid arthritis complicated with interstitial lung disease.Methods:From January 2022 to February 2024,20 rheumatoid arthritis patients complicated with interstitial lung disease(interstitial lung disease group),20 rheumatoid arthritis patients without interstitial lung disease(without interstitial lung disease group),and 20 healthy people(control group)in Xijing Hospital were selected for this study.The fasting venous blood of the three groups of subjects was collected and their D-dimer,C-reactive protein(CRP),rheumatoid factor(RF),and erythrocyte sedimentation rate(ESR)were detected.Subsequently,the correlation between each index and rheumatoid arthritis complicated with interstitial lung disease was analyzed.Results:The D-dimer level of the interstitial lung disease group was significantly higher than the other two groups(P<0.05).The D-dimer level of the group without interstitial lung disease was significantly higher than the control group(P<0.05).CRP levels in the interstitial lung disease group and the group without interstitial lung disease were significantly higher than those of the control group(P<0.05).The ESR and RF levels of the interstitial lung disease group were significantly higher than the other two groups(P<0.05).The levels of ESR and RF levels of the group without interstitial lung disease were significantly higher than the control group(P<0.05).Conclusion:D-dimer levels of rheumatoid arthritis patients are higher than those of healthy individuals,and those complicated with interstitial lung disease present even higher levels.This finding shows that there is a correlation between D-dimer levels and rheumatoid arthritis with interstitial lung disease,which may facilitate the evaluation and diagnosis of this disease.

Grey Correlation Analysis of Physiological Traits Related to Drought Tolerance in Pennisetum sp.

The drought resistance of Pennisetum sp. was analyzed under different drought stress conditions simulated by various concentrations of PEG-6000. Changesofa series of indexes such as chlorophyll content, water content, relative electrical conductivity of osmotic solution, MDA content, proline content, soluble polysaccharide content and soluble protein content in the leaves were measured.The correlation of these indexes with the drought resistance of Pennisetum sp. was an- alyzed by the method of grey correlation analysis. The results showed that the chlorophyll, water content, relative electrical conductivity and soluble protein con- tentexhibited obvious negative correlation with the stress concentration, which de- creasedfollowing the increase of PEG-6000 concentration. The soluble polysaccha- ride contentshowed an increasing trend,the MDA content showed a rise at first fol- lowed by a declinetrend, while the prolinecontent was just opposite to MDA. The changes of the 3 indexes showed obvious positive correlation with thestress con- centration. The correlation of these indexes with the drought resistance of Pennise- tum sp. were ranked as follows： leaf water content （0.980 8）, chlorophyll content （0.967 9）, MDA content （0.876 0）, soluble polysaccharide content （0.839 5）, soluble protein content（0.827 5）, relative electrical conductivity of osmotic solution（0.670 8）, and proline content（0.571 3）.

Analysis of Driving Factors of Grain Output in Henan Province Based on Grey Correlation Model

Henan Province is an important grain production base, whose stable production is related to the economic development and social stability significantly. To summarize the primary factors of grain producing, we used grey correlation analysis method to analyze 10 correlative factors such as grain yield, grain yield per unit area, effective irrigated area, rural employed persons, grain planting area, consumption of chemical fertilizer in 25 years. The results showed order of synthetic degree of incidence: effective irrigated area>rural electricity consumption>consumption of chemical fertilizer>disaster crop area>grain yield per unit of area>total power of agricultural machinery>afflicted crop area>grain planting area>number of the rural employed persons. Finally, according to synthetic degree of incidence between influential factors and total grain output respectively, a series of measures and the suggestions was proposed for grain production in Henan Province, which will also provide the scientific basis and help for the government correct decision-making.

Effects of Nitrogen, Phosphate and Potassium Fertilizers on Soft Rot of Konjac Based on Grey Correlation Analysis

[Objective] The effects of different application amounts of nitrogen, phos-phate and potassium fertilizers on soft rot of konjac were investigated in this study. [Method] The grey correlation analysis was adopted to evaluate the correlation be-tween the application amount of nitrogen, phosphate and potassium fertilizers and the occurrence of soft rot of konjac. [Result] The excessive application of nitrogen fertilizer would induce the occurrence of soft rot of konjac, but the application of potassium fertilizer had a good control effect on soft rot. [Conclusion] The applica-tion amount of nitrogen fertilizer should be control ed reasonably in the planting of konjac, but the application amount of phosphate and potassium fertilizer could be in-creased to some extent, reducing the occurrence of soft rot of konjac.

Correlation, Principal Component and Grey Relation Analysis of Sweetpotato Root Biological Traits

[Objective] This study was conducted to explore the internal relationship among root biological traits of sweetpotato, as well as the regularity in their formation and differentiation. [Method] The root traits of 10 sweetpotato cultivars were measured through hydroponic culture in a greenhouse and field survey, and then their correlations were analyzed by statistical methods. [Result] The root morphological traits of sweetpotato at seedling stage such as projected area, surface area, average diameter and volume processed the highest contribution rate （80.56%） 10 d after transplanting, and the contribution rate of root average diameter reached 27.79% 20 d after transplanting. Storage root fresh weight per plant shared extremely significant positive correlations with storage root fresh weight of penultimate node and storage root fresh weight of antepenultimate node, and a significant positive corre- lation with commercial storage root number, and a significant negative correlation with storage root number of penultimate node. Among them, the correlation coeffi- cient of storage root fresh weight per plant with storage root fresh weight of antepenultimate node was the highest （0.659 5）. Fifteen days after transplanting, storage root fresh weight per plant had significant negative correlations with root projected area, surface area and volume. There was a significant positive correlation between root dry weight and storage root fresh weight per plant 25 d after transplanting. Root dry weight, volume, length, average diameter of sweetpotato seedlings had higher relational degrees with storage root fresh weight per plant. Ten and twenty days after transplanting were important time for the growth and differentiation of sweetpotato roots. In addition, node length and planting depth had certain influence on sweetpotato yield, and direct relationship existed between the seedling root biological traits and storage root yield of sweetpotato. [Conclusion] The results provide theoretical support for standard cultivation and new variety breeding of sweetpotato.

Correlation and variability analysis of yield and quality related traits in different peanut varieties across various ecological zones of China

Peanut cultivation in China spans various ecological zones, each with unique environmental conditions. Identifying suitable peanut varieties for these regions has been challenging due to significant phenotypic variations observed across environments. This study, based on a comprehensive analysis of 256 peanut varieties, selected nine representative varieties(Huayu23, Yuanza9102, Silihong, Wanhua2, Zhonghua6, Zhonghua16, Zhonghua21,Zhonghua215, Zhonghua24) for cultivation in five distinct ecological zones including Chengdu, Hefei, Nanjing,Shijiazhuang, and Wuhan. The yield and quality related phenotypic traits of these varieties were thoroughly assessed, revealing a complex interplay between genetic and environmental factors. Principal component analysis(PCA) effectively distinguished varieties based on yield and quality traits. Strong correlations were observed between specific traits, such as seed size and quality components. The G × E interaction was evident, as some varieties consistently performed better in certain environments. Varieties with lower coefficient of variation(CV)values exhibited stable trait expression, making them reliable choices for broad cultivation. In contrast, varieties with higher CV values displayed greater sensitivity to environmental fluctuations, potentially due to specific genetic factors. Two high oleic acid varieties, Zhonghua24 and Zhonghua215, demonstrated remarkable stability in oleic acid content across diverse environments, suggesting the presence of genetic mechanisms that buffer against environmental variations. Overall, this study underscores the importance of selecting peanut varieties based on their adaptability and performance in specific ecological zones. These findings provide valuable insights for peanut breeders and farmers, facilitating informed decisions for improved crop production and quality.

The Grey Correlation Analysis on the Relationship between the Rural Finance and the Rural Economical Growth in Sichuan Province

This paper analyzes the relationship between rural finance and the rural economy of Sichuan Province from 1999 to 2009 by using the sequential growth rate of the gross value of farming, forestry, animal husbandry and fishery and the sequential growth rate of the per capital total income of rural households as the indicators of rural economic development; and taking the volume of deposit, volume of credit, volume of agricultural credit and the credit volume of township enterprises as the indicators of rural financial development; as well as the method of grey correlation analysis. The results show that there is an obvious positive correlation between them, and the development of country finance has the closest connection with the sequential growth rate of farming, forestry, animal husbandry, sideline production and fishery. The loan scale of township enterprises has the biggest influence on the increase of the rural economy. The countermeasures are put forward, covering optimizing investment structure; supporting the development of township enterprises; encouraging loan; actively lightening the financial difficulties in the process of developing rural economy; innovating and exploring; and promoting the diversified development of rural finance.

Grey correlation analysis of factors influencing maldistribution in feeding device of copper flash smelting

An experimental model of maldistribution was established and grey correlation analysis method was employed to describe quantitatively the maldistribution phenomenon in the feeding device of copper flash smelting.Particle motion in the feeding device was separated into uniform flow in chute and restricted slanting parabolic motion in distributor channel.Factors affecting particle velocity at the chute outlet and particle moving distance in the distributor channel,which also cause the maldistribution,were analyzed based on the assumption of pseudo fluid.Experiments were conducted to study the maldistribution using river sand.The results indicate obvious mass maldistribution and an even higher degree with the increase of feeding mass rate;meanwhile,size maldistribution is negligible.Also,feeding intensity has a larger impact on circumferential maldistribution than on radial maldistribution.Based on the experimental results of the eight factors impacting the maldistribution,grey relation of each factor was calculated using grey correlation analysis.The importances of these factors were sequenced.The results show that a proper adjustment of the structure will ameliorate the maldistribution phenomenon in the feeding device of copper flash smelting.

Assessment of Dependent Performance Shaping Factors in SPAR-H Based on Pearson Correlation Coefficient

With the improvement of equipment reliability,human factors have become the most uncertain part in the system.The standardized Plant Analysis of Risk-Human Reliability Analysis(SPAR-H)method is a reliable method in the field of human reliability analysis(HRA)to evaluate human reliability and assess risk in large complex systems.However,the classical SPAR-H method does not consider the dependencies among performance shaping factors(PSFs),whichmay cause overestimation or underestimation of the risk of the actual situation.To address this issue,this paper proposes a new method to deal with the dependencies among PSFs in SPAR-H based on the Pearson correlation coefficient.First,the dependence between every two PSFs is measured by the Pearson correlation coefficient.Second,the weights of the PSFs are obtained by considering the total dependence degree.Finally,PSFs’multipliers are modified based on the weights of corresponding PSFs,and then used in the calculating of human error probability(HEP).A case study is used to illustrate the procedure and effectiveness of the proposed method.

Correlation analysis between fault frequency and service time of underground fluid instruments

In this paper, we make a statistical analysis of the fault information of the underground fluid instruments of 12 models in China from January 2021 to May 2022 based on the Pearson correlation coefficient, and compare the fault statistics of the meteorological three-element instruments of 3 models during the study period. The results show that:(1) The numbers of faults of the underground fluid instruments of 12models with different service times are basically positively correlated with the numbers of the corresponding instruments, with good consistency. Moreover, the automatic observation instruments(8models) with more than 30 units are significantly correlated at a 0.05 significance level(95% confidence level). Even at a 0.01 significance level(99% confidence level), there are 7 models(7/8) with significant correlation.(2) The positive and negative correlations between the monthly average number of faults and the corresponding service times of the underground fluid instruments of 12 models with different service times are random, and there are 9 models(75%) with no significant correlation at a 0.05 significance level(95% confidence level), while 12 models(100%) with no significant correlation at a 0.01significance level(99% confidence level).(3) The monthly average numbers of faults of the underground fluid instruments of 12 models are basically 0.02-0.05 times/(unit·month), and the overall fault frequency is low.(4) The fault statistics results of the meteorological three-element instruments of 3 models are consistent with the characteristics of the underground fluid instruments of 12 models. In general,there is no significant correlation between the fault frequency and the service time of underground fluid instruments.(5) The results of this paper demonstrate that the service time of underground fluid instruments cannot be taken as the main reason for whether to update the instruments. Similarly, the fault frequency of the instruments cannot be taken as the main reason for the service life of the instruments in the process of formulating the service life standards of underground fluid instruments.

Correlation analysis of longitudinal cracks and vertical deformation within asphalt pavement of cold regions

The asphalt pavement longitudinal crack is a common distress in cold regions,resulting from uneven deformation of the subgrade.Analysis of the correlation law between uneven deformation and crack distress is of positive significance for understanding the mechanism of crack initiation,and putting forward treatment measures.In view of the complexity of longitudinal crack inducement and road surface deformation,the grey relational method was used to analyze this relationship.Through long-term monitoring of the vertical deformation data of typical road sections,the vertical deformation law of the pavement surface and its deformation characteristics under the action of temperature field are analyzed.Parameters such as vertical relative deformation,vertical relative deformation rate and vertical differential deformation VDSr were constructed to describe vertical deformation characteristics.Typical distribution characteristics of longitudinal fractures and their length and distribution characteristics are also described.The grey correlation analysis theory was utilized to analyze the relationship between deformation characteristics of sections,cross sections and monitoring points and longitudinal crack characteristics(length and location).The analysis reveals a linear positive correlation or a high correlation between several indicators.This study can provide a deeper understanding of the occurrence and development mechanism of longitudinal cracks in asphalt pavement of cold areas,and give references for the research of road engineering structure,materials and distress prevention.

Materials Selection of Thermoplastic Matrices of Natural Fibre Composites for Cyclist Helmet Using an Integration of DMAIC Approach in Six Sigma Method Together with Grey Relational Analysis Approach

Natural fibre reinforced polymer composite(NFRPC)materials are gaining popularity in the modern world due to their eco-friendliness,lightweight nature,life-cycle superiority,biodegradability,low cost,and noble mechanical properties.Due to the wide variety of materials available that have comparable attributes and satisfy the requirements of the product design specification,material selection has become a crucial component of design for engineers.This paper discusses the study’s findings in choosing the suitable thermoplastic matrices of Natural Fibre Composites for Cyclist Helmet utilising the DMAIC,and GRA approaches.The results are based on integrating two decision methods implemented utilising two distinct decision-making approaches:qualitative and quantitative.This study suggested thermoplastic polyethylene as a particularly ideal matrix in composite cyclist helmets during the selection process for the best thermoplastic matrices material using the 6σtechnique,with the decision based on the highest performance,the lightest weight,and the most environmentally friendly criteria.The DMAIC and GRA approach significantly influenced the material selection process by offering different tools for each phase.In the future study,selection technique may have been more exhaustive if more information from other factors had been added.

Application of Grey Correlation Degree Analysis in Broad Bean Strain Screening

[Objectives] The aim was to clarify the target and approach to purifying and selecting Baoshan Touxinlv broad bean. [Methods] In 2012,5 homozygous strains were selected successfully as the material,and completely randomized block arrangement was adopted with 3 repeated trials to analyze the effects of plant height,effective length of podding branches,branch number per plant,pod number per plant,grain number per pod and 100-grain weight on the yield of each plant in the system. [Results] The results showed that the effects of the various factors on the yield of Baoshan broad beans were in the order of grain number per pod 〉 effective length of podding branches 〉 100-grain weight 〉 pod number per plant 〉 branch number per plant 〉 plant height. [Conclusions]In breeding new strains of Baoshan broad beans,under the premise of ensuring the seed nature and quality of the original variety,priority should be given to the gain number per pod and the increment of effective length of podding branches,followed by the pod number per plant,branch number per plant,plant height,which is the best way to breed new strains of Baoshan Touxinlv broad beans.