Assessment of Crop Yield in China Simulated by Thirteen Global Gridded Crop Models

Global gridded crop models(GGCMs) have been broadly applied to assess the impacts of climate and environmental change and adaptation on agricultural production. China is a major grain producing country, but thus far only a few studies have assessed the performance of GGCMs in China, and these studies mainly focused on the average and interannual variability of national and regional yields. Here, a systematic national-and provincial-scale evaluation of the simulations by13 GGCMs [12 from the GGCM Intercomparison(GGCMI) project, phase 1, and CLM5-crop] of the yields of four crops(wheat, maize, rice, and soybean) in China during 1980–2009 was carried out through comparison with crop yield statistics collected from the National Bureau of Statistics of China. Results showed that GGCMI models generally underestimate the national yield of rice but overestimate it for the other three crops, while CLM5-crop can reproduce the national yields of wheat, maize, and rice well. Most GGCMs struggle to simulate the spatial patterns of crop yields. In terms of temporal variability, GGCMI models generally fail to capture the observed significant increases, but some can skillfully simulate the interannual variability. Conversely, CLM5-crop can represent the increases in wheat, maize, and rice, but works less well in simulating the interannual variability. At least one model can skillfully reproduce the temporal variability of yields in the top-10 producing provinces in China, albeit with a few exceptions. This study, for the first time, provides a complete picture of GGCM performance in China, which is important for GGCM development and understanding the reliability and uncertainty of national-and provincial-scale crop yield prediction in China.

Combined hybrid energy storage system and transmission grid model for peak shaving based on time series operation simulation

This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.

Multiple Targets Localization Algorithm Based on Covariance Matrix Sparse Representation and Bayesian Learning

The multi-source passive localization problem is a problem of great interest in signal pro-cessing with many applications.In this paper,a sparse representation model based on covariance matrix is constructed for the long-range localization scenario,and a sparse Bayesian learning algo-rithm based on Laplace prior of signal covariance is developed for the base mismatch problem caused by target deviation from the initial point grid.An adaptive grid sparse Bayesian learning targets localization(AGSBL)algorithm is proposed.The AGSBL algorithm implements a covari-ance-based sparse signal reconstruction and grid adaptive localization dictionary learning.Simula-tion results show that the AGSBL algorithm outperforms the traditional compressed-aware localiza-tion algorithm for different signal-to-noise ratios and different number of targets in long-range scenes.

Evaluation of regional ionospheric grid model over China from dense GPS observations

The current global or regional ionospheric models have been established for monitoring the ionospheric variations. However, the spatial and temporal resolutions are not enough to describe total electron content（TEC） variations in small scales for China. In this paper, a regional ionospheric grid model（RIGM） with high spatial-temporal resolution（0.5 0.5 and 10-min interval） in China and surrounding areas is established based on spherical harmonics expansion from dense GPS measurements provided by Crustal Movement Observation Network of China（CMONOC） and the International GNSS Service（IGS）. The correlation coefficient between the estimated TEC from GPS and the ionosonde measurements is 0.97, and the root mean square（RMS） with respect to Center for Orbit Determination in Europe（CODE） Global Ionosphere Maps（GIMs） is 4.87 TECU. In addition, the impact of different spherical harmonics orders and degrees on TEC estimations are evaluated and the degree/order 6 is better. Moreover, effective ionospheric shell heights from300 km to 700 km are further assessed and the result indicates that 550 km is the most suitable for regional ionospheric modeling in China at solar maximum.

Establishment and analysis of global gridded Tm-Ts relationship model

In ground-based GPS meteorology, Tm is a key parameter to calculate the conversion factor that can convert the zenith wet delay（ZWD） to precipitable water vapor（PWV）. It is generally acknowledged that Tm is in an approximate linear relationship with surface temperature Ts, and the relationship presents regional variation. This paper employed sliding average method to calculate correlation coefficients and linear regression coefficients between Tm and Ts at every 2°× 2.5° grid point using Ts data from European Centre for Medium-Range Weather Forecasts（ECMWF） and Tm data from ＂GGOS Atmosphere＂, yielding the grid and bilinear interpolation-based Tm Grid model. Tested by Tm and Ts grid data, Constellation Observation System of Meteorology, Ionosphere, and Climate（COSMIC） data and radiosonde data, the Tm Grid model shows a higher accuracy relative to the Bevis Tm-Ts relationship which is widely used nowadays. The Tm Grid model will be of certain practical value in high-precision PWV calculation.

An Algorithm of the Adaptive Grid and Fuzzy Interacting Multiple Model

This paper studies the algorithm of the adaptive grid and fuzzy interacting multiple model （AGFIMM） for maneuvering target tracking, while focusing on the problems of the fixed structure multiple model （FSMM） algorithm＇s cost-efficiency ratio being not high and the Markov transition probability of the interacting multiple model （IMM） algorithm being difficult to determine exactly. This algorithm realizes the adaptive model set by adaptive grid adjustment, and obtains each model matching degree in the model set by fuzzy logic inference. The simulation results show that the AGFIMM algorithm can effectively improve the accuracy and cost-efficiency ratio of the multiple model algorithm, and as a result is suitable for enineering apolications.

Modeling Distortion Signals of Power Grid Based on Wiener-G Functionals

The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load was found based on the Gaussian white noise as input. And then the uniform mathematical model of the power grid signal was established according to the homogeneous of the same order of Wiener functional series. Finally,taking three typical distortion sources which are semiconductor rectifier,electric locomotive and electric arc furnace in power grid as examples,we have validated the model through the Matlab simulation and analyzed the simulation errors. The results show that the uniform mathematical model of distortion signals in power grid can approximation the actual model by growing the items of the series under the condition of the enough storage space and computing speed.

Impact of interconnections and renewable energy integration on the Philippine-Sabah Power Grid systems

This study presents a comprehensive impact analysis of the rotor angle stability of a proposed international connection between the Philippines and Sabah,Malaysia,as part of the Association of Southeast Asian Nations(ASEAN)Power Grid.This study focuses on modeling and evaluating the dynamic performance of the interconnected system,considering the high penetration of renewable sources.Power flow,small signal stability,and transient stability analyses were conducted to assess the ability of the proposed linked power system models to withstand small and large disturbances,utilizing the Power Systems Analysis Toolbox(PSAT)software in MATLAB.All components used in the model are documented in the PSAT library.Currently,there is a lack of publicly available studies regarding the implementation of this specific system.Additionally,the study investigates the behavior of a system with a high penetration of renewable energy sources.Based on the findings,this study concludes that a system is generally stable when interconnection is realized,given its appropriate location and dynamic component parameters.Furthermore,the critical eigenvalues of the system also exhibited improvement as the renewable energy sources were augmented.

Ionospheric disturbances following the March 2015 geomagnetic storm from GPS observations in China

When strong solar activities and geomagnetic storms happen, satellite communications and navigation system will be strongly disturbed. It is of great significance to monitor ionospheric disturbances,because empirical models cannot capture ionospheric anomalous disturbances well. Nowadays, dualfrequency GPS(Global Positioning System) observations can be used to estimate the ionospheric total electron content, correct the ionospheric delay and analyze the response of the ionosphere to geomagnetic storms. In this paper, the ionospheric response to the geomagnetic storm occurred in March 2015 is investigated using GPS observations provided by Crustal Movement of Observation Network of China. The result shows that this storm increases the electron density in the ionosphere quickly and disrupts the structure of the northern equatorial anomaly region at the beginning. In the main process stage, compared with that in the quite periods, the VTEC(Vertical Total Electron Content)around the longitude of 120°E decreases by 50% and the amount of depletion is larger in the high latitude region than that in the low latitude region. We also find the height of the peak electron density in F2 layer increases during the geomagnetic storm from the electron density profiles derived from GPS occultation mission.

Study on Lightning Transient Ground Potential in the Chaoyang Mountain Wind Farm

In order to get the distribution characteristics of lightning transient ground potential of 100 MW wind farm in the Chaoyang Mountain,Jinzhai County,the characteristics of lightning parameters within 5 km of the wind farm were analyzed based on the lightning monitoring data from 2006 to 2020 provided by Anhui Meteorological Bureau.According to the on-site geological investigation,a double-ring ground network model was established to simulate the three-dimensional transient contact voltage and step voltage distribution of a typical wind fan was obtained through simulation.The results show that the average lightning current amplitude around the wind farm was 44 kA,instead of 10 kA in the current traditional simulation research,which is used as the excitation source for the subsequent simulation of lightning transient ground potential.The peak value of lightning transient contact voltage of the single wind turbine is 2158.35 V,and the peak value of lightning transient step voltage is 441.75 V.The simulation results can provide certain reference for subsequent lightning risk assessment,lightning scheme design and ground grid construction of wind farms.

Distributed UAV swarm based on spatial grid model

Unmanned Aerial Vehicle(UAV)swarm has become the inevitable trend of development,which will enjoy broad prospects to be applied in the future.However,the change of UAV application mode will certainly bring new technical challenges in the flight management,environmental perception,collaborative control as well as other fields.This paper considers that it can be an effective solution to realize the unified management of spatial information on the UAV platform by adopting the spatial grid model represented by the Geo SOT-3D,and to reduce the workload of flight management,airborne environmental perception,and ranging in the neighborhood through the association and query of all spatial grid data.

STGI:a spatio-temporal grid index model for marine big data

Marine big data are characterized by a large amount and complex structures,which bring great challenges to data management and retrieval.Based on the GeoSOT Grid Code and the composite index structure of the MongoDB database,this paper proposes a spatio-temporal grid index model(STGI)for efficient optimized query of marine big data.A spatio-temporal secondary index is created on the spatial code and time code columns to build a composite index in the MongoDB database used for the storage of massive marine data.Multiple comparative experiments demonstrate that the retrieval efficiency adopting the STGI approach is increased by more than two to three times compared with other index models.Through theoretical analysis and experimental verification,the conclusion could be achieved that the STGI model is quite suitable for retrieving large-scale spatial data with low time frequency,such as marine big data.

A GPU accelerated finite volume coastal ocean model

With the unstructured grid, the Finite Volume Coastal Ocean Model（FVCOM） is converted from its original FORTRAN code to a Compute Unified Device Architecture（CUDA） C code, and optimized on the Graphic Processor Unit（GPU）. The proposed GPU-FVCOM is tested against analytical solutions for two standard cases in a rectangular basin, a tide induced flow and a wind induced circulation. It is then applied to the Ningbo＇s coastal water area to simulate the tidal motion and analyze the flow field and the vertical tide velocity structure. The simulation results agree with the measured data quite well. The accelerated performance of the proposed 3-D model reaches 30 times of that of a single thread program, and the GPU-FVCOM implemented on a Tesla k20 device is faster than on a workstation with 20 CPU cores, which shows that the GPU-FVCOM is efficient for solving large scale sea area and high resolution engineering problems.

An Approach for Establishing a Common Grid Model for Flow-based Market Mechanism Simulations

The discussions on the development of an electricity market model for accommodating cross-border cooperation remains active in Europe.The main interest is the establishment of market couplings without curtailing the fair use of the scarce transmission capacity.However,it is difficult to gain mutual consensus on this subject because of the absence of convincing simulation results for the entire region.To achieve that,researchers need a common grid model(CGM)which is a simplified representation of the detailed transmission model which comprises aggregated buses and transmission lines.A CGM should sufficiently represent the inter-area power flow characteristics.Generally,it is difficult to establish a standard CGM that represents the actual transmission network with a suf-ficient degree of exactness because it requires knowledge on the details of the transmission network,which are undisclosed.This paper addresses the issue and reviews the existing approaches in transmission network approximation,and their shortcomings.Then,it proposes a new approach called the adaptive CGM approximation(ACA)for serving the purpose.The ACA is a datadriven approach,developed based on the direct current power flow theory.It is able to construct a CGM based on the published power flow data between the inter-connected market areas.This is done by solving the issue as a non-linear model fitting problem.The method is validated using three case studies.

Two and three dimensional modeling of fluidized bed with multiple jets in a DEM-CFD framework

Fluidized beds with multiple jets have widespread industrial applications. The objective of this paper is to investigate the jet interactions and hydrodynamics of a fluidized bed with multiple jets. Discrete element modeling coupled with in-house CFD code GenlDLEST has been used to simulate a bed with nine jets. The results are compared with published experiments. Mono dispersed particles of size 550 ~m are used with 1.4 times the minimum fluidization velocity of the particles. Both two and three dimensional computations have been performed. To the best of our knowledge, the results presented in this paper are the first full 3D simulations of a fluidized bed performed with multiple jets. Discrepancies between the experiment and simulations are discussed in the context of the dimensionality of the simulations. The 2D solid fraction profile compares well with the experiment close to the distributor plate. At higher heights, the 2D simulation over-predicts the solid fraction profiles near the walls. The 3D simulation on the other hand is better able to capture the solid fraction profile higher up in the bed compared to that near the distributor plate. Similarly, the normalized particle velocities and the particle fluxes compare well with the experiment closer to the distributor plate for the 2D simulation and the freeboard for the 3D simulation, respectively. A lower expanded bed height is predicted in the 2D simulation compared to the 3D simulation and the experiment. The results obtained from DEM computations show that a 2D simulation can be used to capture essential jetting trends near the distributor plate regions, whereas a full scale 3D simulation is needed to capture the bubbles near the freeboard regions. These serve as validations for the experiment and help us understand the complex jet interaction and solid circulation patterns in a multiple jet fluidized bed system.

A New Solution Architecture for Online Power System Analysis

The current DSA system used in the dispatching control centers in China is a near real-time analysis system with response speed in the order of minutes.Based on a review of the state-of-the-art in online analysis and discussion of distributed data processing and computation architecture patterns,a new online analysis architecture is proposed.The primary goal of the new architecture is to increase the online analysis response speed to the order of seconds.A reference implementation of the proposed online analysis architecture to validate the feasibility of implementing the architecture and some performance testing results are presented.

Simulation of flows with moving contact lines on a dual-resolution Cartesian grid using a diffuse-interface immersed-boundary method

In this paper, we investigate flows with moving contact lines on curved solid walls on a dual-resolution grid using a diffuse-interface immersed-boundary（DIIB） method. The dual-resolution grid, on which the flows are solved on a coarse mesh while the interface is resolved on a fine mesh, was shown to significantly improve the computational efficiency when simulating multiphase flows. On the other hand, the DIIB method is able to resolve dynamic wetting on curved substrates on a Cartesian grid, but it usually requires a mesh of high resolution in the vicinity of a moving contact line to resolve the local flow. In the present study, we couple the DIIB method with the dual-resolution grid, to improve the interface resolution for flows with moving contact lines on curved solid walls at an affordable cost. The dynamic behavior of moving contact lines is validated by studying drop spreading, and the numerical results suggest that the effective slip length λ_n can be approximated by 1.9Cn, where Cn is a dimensionless measure of the thickness of the diffuse interface. We also apply the method to drop impact onto a convex substrate, and the results on the dual-resolution grid are in good agreement with those on a single-resolution grid. It shows that the axisymmetric simulations using the DIIB method on the dual-resolution grid saves nearly 60% of the computational time compared with that on a single-resolution grid.

A Review on TSO-DSO Data Exchange,CIM Extensions and Interoperability Aspects

The exchange of information between transmission system operators(TSOs)and distribution system operators(DSOs)is a common practice.However,the evolution of the regulatory frameworks in Europe has increased the need for enhancing TSO-DSO data exchange and interoperability.This paper provides an overview of the TSO-DSO data exchanges and demonstrates the best practices using International Electrotechnical Commission(IEC)common information model(CIM),including the implementation of IEC common grid model exchange standard(CGMES),and discussion of the corresponding advantages,disadvantages,and challenges.Furthermore,this paper evaluates and reports the activities already carried out within European projects,with particular focus on TSO-DSO interoperability.Finally,this paper concludes the need for TSOs and DSOs to rely on standard-based solutions when performing TSO-DSO data exchange,which enables the efficient operation and development of the future power systems.

Distributed dynamic pricing based on demand-supply balance and voltage phase difference in power grid

This paper discusses a distributed decision procedure for determining the electricity price for a real-time electricity market in an energy management system. The price decision algorithm proposed in this paper derives the optimal electricity price while considering the constraints of a linearized AC power grid model. The algorithm is based on the power demand-supply balance and voltage phase differences in a power grid. In order to determine the optimal price that maximizes the social welfare distributively and to improve the convergence speed of the algorithm, the proposed algorithm updates the price through the alternating decision making of market participants. In this paper, we show the convergence of the price derived from our proposed algorithm. Furthermore, numerical simulation results show that the proposed dynamic pricing methodology is effective and that there is an improvement in the convergence speed, as compared with the conventional method.