This study is a preparation phase for integrated visualization of battlefield situation. To develop the ground control station for unmanned systems, many factors have to be considered from the design stages, such as l...This study is a preparation phase for integrated visualization of battlefield situation. To develop the ground control station for unmanned systems, many factors have to be considered from the design stages, such as layout, information component, representation scheme, and human operation methods. Considering such many factors can be very difficult, hence we conducted an in-depth investigation of design factors from major UAV stations around the world. We analyzed the design characteristics and the specifics. In conclusion, we were able to derive some common aspects of design characteristics, which lead to the successful design approach.展开更多
For autonomous MUAV,the Ground Control Station(GCS)including hardware and modular software programming such as control modular,navigation modular,display modular and monitor modular becomes important equipment to be d...For autonomous MUAV,the Ground Control Station(GCS)including hardware and modular software programming such as control modular,navigation modular,display modular and monitor modular becomes important equipment to be developed.This paper emphasizes the global planning and the local replanning arithmetic based on three-dimensional velocity potential field for the moving threats.During the test on the ground and in the sky,GCS show the remote sensing information precisely and send the control command in time.The system can be used to assist in the function of autonomous complex task for MUAV.展开更多
Recently, if you look at the trend of the Unmanned Combat Entities (UCE) on the world that are actually operational, a large number of personnel per one UCE has been operating the GCS. However, UCEs to perform the att...Recently, if you look at the trend of the Unmanned Combat Entities (UCE) on the world that are actually operational, a large number of personnel per one UCE has been operating the GCS. However, UCEs to perform the attack/reconnaissance mission are very expensive assets and require a considerable amount of time to train for UCE operations. Accordingly, the future battlefield environment has become important to develop multiple UCE ground control station. In this study, we developed a multiple UCE GCS that one operator can operate up to four UCEs. The software was built with a total of 6 displays using a Lockheed Martin Corporation’s prepar3D. Scenario of research takes into account the operation of the South Korea-type future multiple UCEs, to take advantage of the simulation system, in this paper, we propose for each of the concepts and technologies.展开更多
This study is a preparation phase for visualization of utilized information using ergonomic user interface and standardization of elements for GCS (Ground Control System). Therefore, we investigated the instances of G...This study is a preparation phase for visualization of utilized information using ergonomic user interface and standardization of elements for GCS (Ground Control System). Therefore, we investigated the instances of GCS (such as hawk and patriot missile’s GCS) for defense system. Based on the collected data, we compared and analyzed the GCS screen design. In this paper, we conduct case study for ergonomically development of GCS. It is expected that this research improves the situational awareness and reduces the user’s task load.展开更多
The importance of the aircraft is increasing gradually;among them it may be called Ground Control Station (GCS) receiving the highest expectations. In aspect of operation, operator’s workload and working speed are on...The importance of the aircraft is increasing gradually;among them it may be called Ground Control Station (GCS) receiving the highest expectations. In aspect of operation, operator’s workload and working speed are one of the most important factors. Thus, we need to compare Touch mode and Non Touch mode in order to improve workload and working speed. In this paper, we analyzed the differences of Touch mode and Non Touch mode about workload, working speed in operation of aircraft. Through NASA-TLX and Measured working time, quantified data were collected and an analysis of variance (ANOVA) was performed. According to experimental result, working speed and workload according to input mode showed significant difference. In ground operation, Touch mode is better than Non Touch mode about working speed and workload. In the Touch mode, the optimal value of lower display angle was selected as 60。 angle.展开更多
集成运行控制系统(Integrated Operation and Control System,IOCS)是极轨气象卫星地面应用系统的重要系统之一,其主要作用之一是规划多卫星地面站接收任务,确保全球资料的完整获取。当卫星地面站某个天线出现异常或不可用时,若仍按原...集成运行控制系统(Integrated Operation and Control System,IOCS)是极轨气象卫星地面应用系统的重要系统之一,其主要作用之一是规划多卫星地面站接收任务,确保全球资料的完整获取。当卫星地面站某个天线出现异常或不可用时,若仍按原有的任务规划进行数据接收,将直接造成全球资料的不完整,因此需要研究卫星地面站天线状态的预测和相应的任务再规划技术,从而及时发现和处理卫星地面站的天线异常、降低连续多轨数据接收失败风险,最终达到提高极轨气象卫星数据接收成功率的目的。文章设计了基于统计分析的卫星地面站天线状态预测方法,并研究了对后续系统运行改变最小、易实现和结果可复核的任务再规划方法。展开更多
文摘This study is a preparation phase for integrated visualization of battlefield situation. To develop the ground control station for unmanned systems, many factors have to be considered from the design stages, such as layout, information component, representation scheme, and human operation methods. Considering such many factors can be very difficult, hence we conducted an in-depth investigation of design factors from major UAV stations around the world. We analyzed the design characteristics and the specifics. In conclusion, we were able to derive some common aspects of design characteristics, which lead to the successful design approach.
基金Sponsored by the Key Programs of National Natural Science Foundation of China(Grant No.60736025 and 60905056)the Major Programs of China National Space Administration(Grant No.D2120060013)
文摘For autonomous MUAV,the Ground Control Station(GCS)including hardware and modular software programming such as control modular,navigation modular,display modular and monitor modular becomes important equipment to be developed.This paper emphasizes the global planning and the local replanning arithmetic based on three-dimensional velocity potential field for the moving threats.During the test on the ground and in the sky,GCS show the remote sensing information precisely and send the control command in time.The system can be used to assist in the function of autonomous complex task for MUAV.
文摘Recently, if you look at the trend of the Unmanned Combat Entities (UCE) on the world that are actually operational, a large number of personnel per one UCE has been operating the GCS. However, UCEs to perform the attack/reconnaissance mission are very expensive assets and require a considerable amount of time to train for UCE operations. Accordingly, the future battlefield environment has become important to develop multiple UCE ground control station. In this study, we developed a multiple UCE GCS that one operator can operate up to four UCEs. The software was built with a total of 6 displays using a Lockheed Martin Corporation’s prepar3D. Scenario of research takes into account the operation of the South Korea-type future multiple UCEs, to take advantage of the simulation system, in this paper, we propose for each of the concepts and technologies.
文摘This study is a preparation phase for visualization of utilized information using ergonomic user interface and standardization of elements for GCS (Ground Control System). Therefore, we investigated the instances of GCS (such as hawk and patriot missile’s GCS) for defense system. Based on the collected data, we compared and analyzed the GCS screen design. In this paper, we conduct case study for ergonomically development of GCS. It is expected that this research improves the situational awareness and reduces the user’s task load.
文摘The importance of the aircraft is increasing gradually;among them it may be called Ground Control Station (GCS) receiving the highest expectations. In aspect of operation, operator’s workload and working speed are one of the most important factors. Thus, we need to compare Touch mode and Non Touch mode in order to improve workload and working speed. In this paper, we analyzed the differences of Touch mode and Non Touch mode about workload, working speed in operation of aircraft. Through NASA-TLX and Measured working time, quantified data were collected and an analysis of variance (ANOVA) was performed. According to experimental result, working speed and workload according to input mode showed significant difference. In ground operation, Touch mode is better than Non Touch mode about working speed and workload. In the Touch mode, the optimal value of lower display angle was selected as 60。 angle.
文摘无人机(unmanned aerial vehicle,UAV)的应用场景的多样化及复杂化对飞行器的功能、性能、安全性提出了新的挑战。提出一种兼具垂直起降、空中悬停和高速飞行能力且安全性更高的新型单涵道式飞行器整体设计,分析并推导飞行器的动力学方程以降低系统的耦合性。为了提高系统的实时性与鲁棒性,在飞行器软件系统中移植UCOSⅢ,并基于双闭环比例微分积分(proportion integral derivative,PID)算法设计其姿态控制器。通过Unity3D和C#编写兼具模拟飞行的地面站程序实现多平台控制,最终完成飞行器样机的总体设计且通过试飞实验验证其飞行性能。研究成果对单涵道飞行器的实际工程应用具有重要的借鉴意义。
文摘集成运行控制系统(Integrated Operation and Control System,IOCS)是极轨气象卫星地面应用系统的重要系统之一,其主要作用之一是规划多卫星地面站接收任务,确保全球资料的完整获取。当卫星地面站某个天线出现异常或不可用时,若仍按原有的任务规划进行数据接收,将直接造成全球资料的不完整,因此需要研究卫星地面站天线状态的预测和相应的任务再规划技术,从而及时发现和处理卫星地面站的天线异常、降低连续多轨数据接收失败风险,最终达到提高极轨气象卫星数据接收成功率的目的。文章设计了基于统计分析的卫星地面站天线状态预测方法,并研究了对后续系统运行改变最小、易实现和结果可复核的任务再规划方法。
