Considering the joint effects of various factors such as temporal baseline, spatial baseline, thermal noise, the difference of Doppler centroid frequency and the error of data processing on the interference correlatio...Considering the joint effects of various factors such as temporal baseline, spatial baseline, thermal noise, the difference of Doppler centroid frequency and the error of data processing on the interference correlation, an optimum selection method of common master images for ground deformation monitoring based on the permanent scatterer and differential SAR interferometry (PS-DInSAR) technique is proposed, in which the joint correlation coeficient is used as the evaluation function. The principle and realization method of PS-DInSAR technology is introduced, the factors affecting the DInSAR correlation are analysed, and the joint correlation function model and its solution are presented. Finally an experiment for the optimum selection of common master images is performed by using 25 SAR images over Shanghai taken by the ERS-1/2 as test data. The results indicate that the optimum selection method for PS-DInSAR common master images is effective and reliable.展开更多
Landslides are a frequent phenomenon on mountain Elgon, particularly in Bududa district on the SW side of this extinct shield volcano. Landslides have led to the destruction of property and loss of life we, therefore,...Landslides are a frequent phenomenon on mountain Elgon, particularly in Bududa district on the SW side of this extinct shield volcano. Landslides have led to the destruction of property and loss of life we, therefore, need to monitor them. Monitoring how landslides build-up makes it possible to timely evacuate people and build barriers to protect property against damage by landslides. Residents in Bududa have reported cracks developing in the ground and houses. These cracks continue to grow, suggesting a future catastrophic event. Such an event may resemble the 2010 landslide in Bududa, which killed approximately 450 people and destroyed much property. In order to mitigate the consequences of a new landslide as much as possible, we monitored ground motion in Bududa in eleven stations from June 2018 to June 2019. Six-hour session GPS observations were made, and deformation was determined over the observation period, June to September 2018, September to November 2018, November 2018 to February 2019 and February to June 2019. A congruency test was performed to determine how significant the deformation was. It appeared that the ground deformation differed largely at various monitored stations, ranging from 0.004 to 0.076 m, 0.001 to 0.067 m and 0 to 0.078 m in the East, North and vertical directions respectively. The values indicate that most slopes in the district are unstable, particularly in the wet seasons, which implies that future landslides pose a high risk for society.展开更多
Shanghai has experienced the greatest land subsidence in China in the past sixty years and produced undesirable environmental impact. However, horizontal ground deformation has not been understood yet. Therefore groun...Shanghai has experienced the greatest land subsidence in China in the past sixty years and produced undesirable environmental impact. However, horizontal ground deformation has not been understood yet. Therefore ground deformation monitoring together with the analysis of its driving forces are critical for geo-hazards early-warning, city planning and sustainable urbanization in Shanghai. In this paper, two-dimensional ground deformation monitoring was performed in Shanghai with SBAS and MSBAS InSAR methods. Twenty-nine Multi-Look Fine 6 (MF6) Radarsat-2 SLC data acquired during 2011-2013 were used to derive vertical ground deformation. Meanwhile, six descending Multi-Look Fine 6 (MF6) and four ascending Multi-Look Fine 2 (MF2) spanning April to August, 2008, were used to derive vertical and horizontal ground deformation during the observation period. The results indicate that vertical and horizontal deformations in 2008 were not homogeneously distributed in different districts ranging from 0-2 cm/year. Vertical deformation rate during 2011-2013 were decreased to less than 1 cm/year in most district of Shanghai area. Activities from groundwater exploitation and rapid urbanization are responsible for most of the ground deformation in Shanghai. Thus, future ground deformation in vertical and horizontal directions should be warranted.展开更多
When tunnels are constructed in coastal cities,they will inevitably undercross a river.Exploring the influence of rivers on tunnelling-induced deformation in costal soft soil is of great significance for controlling e...When tunnels are constructed in coastal cities,they will inevitably undercross a river.Exploring the influence of rivers on tunnelling-induced deformation in costal soft soil is of great significance for controlling excessive settlement and protecting surrounding buildings.This paper presents a case study of twin tunnels undercrossing a river in soft soil in Hangzhou,China.The soft soil of Hangzhou refers to cohesive soil in a soft plastic or fluid plastic state with high natural water content,high compressibility,low bearing capacity,and low shear strength.Considering the influence of the river,the research region was divided into two parts,inside and outside the river-affected area,based on monitoring data of the Zizhi Tunnel.The development law of surface settlement is divided into three stages.In the first and second stages,the surface settlement within and outside the river-affected area showed a similar trend:the settlement increased and the growth rate of settlement in the second stage was smaller within the river-affected area.In the third stage,the surface settlement continued to increase within the river-affected area,while it converged outside the river-affected area.Within the river-affected area,there was an asynchronization of the sinking rate and stability of vault settlements and surface settlements.A numerical model was established by simulating different reinforcements of the tunnel.The numerical model revealed that the ground movement is influenced by the distribution and amount of the excess pore water pressure.The excess pore pressure was concentrated mostly in the range of 1.0H_(t)-3.0H_(t)(H_(t) is the tunnel height)before the tunnel face,especially within the river-affected area.Inside the river-affected area,the dissipation of excess pore water pressure needs more time,leading to slow stabilization of surface settlement.When undercrossing a river,a cofferdam is necessary to reduce excessive ground deformation by dispersing the distribution of excess pore water pressure.展开更多
Lateral deformation of liquefiable soil is a cause of much damage during earthquakes, reportedly more than other forms of liquefaction-induced ground failures. Researchers have presented studies in which the liquefied...Lateral deformation of liquefiable soil is a cause of much damage during earthquakes, reportedly more than other forms of liquefaction-induced ground failures. Researchers have presented studies in which the liquefied soil is considered as viscous fluid. In this manner, the liquefied soil behaves as non-Newtonian fluid, whose viscosity decreases as the shear strain rate increases. The current study incorporates computational fluid dynamics to propose a simplified dynamic analysis for the liquefaction-induced lateral deformation of earth slopes. The numerical procedure involves a quasi-linear elastic model for small to moderate strains and a Bingham fluid model for large strain states during liquefaction. An iterative procedure is considered to estimate the strain-compatible shear stiffness of soil. The post-liquefaction residual strength of soil is considered as the initial Bingham viscosity. Performance of the numerical procedure is examined by using the results of centrifuge model and shaking table tests together with some field observations of lateral ground deformation. The results demonstrate that the proposed procedure predicts the time history of lateral ground deformation with a reasonable degree of precision.展开更多
To analyze the pipeline response under permanent ground deformation,the evolution of resistance acting on the pipe during the vertical downward offset is an essential ingredient.However,the efficient simulation of pip...To analyze the pipeline response under permanent ground deformation,the evolution of resistance acting on the pipe during the vertical downward offset is an essential ingredient.However,the efficient simulation of pipe penetration into soil is challenging for the conventional finite element(FE)method due to the large deformation of the surrounding soils.In this study,the B-spline material point method(MPM)is employed to investigate the pipe-soil interaction during the downward movement of rigid pipes buried in medium and dense sand.To describe the density-and stress-dependent behaviors of sand,the J2-deformation type model with state-dependent dilatancy is adopted.The effectiveness of the model is demonstrated by element tests and biaxial compression tests.Afterwards,the pipe penetration process is simulated,and the numerical outcomes are compared with the physical model tests.The effects of pipe size and burial depth are investigated with an emphasis on the mobilization of the soil resistance and the failure mechanisms.The simulation results indicate that the bearing capacity formulas given in the guidelines can provide essentially reasonable estimates for the ultimate force acting on buried pipes,and the recommended value of yield displacement may be underestimated to a certain extent.展开更多
Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method....Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method.The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches.This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting.The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods.The influence of factors such as faulting offset,burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated.Finally,the tensile rupture of a pipeline due to normal faulting is investigated.展开更多
A new centrifuge based method for determining the response of continuous buried pipe to PGD is presented. The physical characteristics of the RPI's 100 g-ton geotechnical centrifuge and the current lifeline experi...A new centrifuge based method for determining the response of continuous buried pipe to PGD is presented. The physical characteristics of the RPI's 100 g-ton geotechnical centrifuge and the current lifeline experiment split-box are described: The split-box contains the model pipeline and surrounding soil and is manufactured such that half can be offset, in flight, simulating PGD. In addition, governing similitude relations which allow one to determine the physical characteristics, (diameter, wall thickness and material modulus of elasticity) of the model pipeline are presented. Finally, recorded strains induced in two buried pipes with prototype diameters of 0.63 m and 0.95 m (24 and 36 inch) subject to 0.6 and 2.0 meters (2 and 6 feet) of full scale fault offsets and presented and compared to corresponding FE results.展开更多
Empirical data on deep urban excavations can provide designers a significant reference basis for assessing potential deformations of the deep excavations and their impact on adjacent structures. The construction of th...Empirical data on deep urban excavations can provide designers a significant reference basis for assessing potential deformations of the deep excavations and their impact on adjacent structures. The construction of the Shanghai Center involved excavations in excess of 33-m-deep using the top-down method at a site underlain by thick deposits of marine soft clay. A retaining system was achieved by 50-m-deep diaphragm walls with six levels of struts. During construction, a comprehensive instrumentation program lasting 14 months was conducted to monitor the behaviors of this deep circular excavation. The following main items related to ground surface movements and deformations were collected: (1) walls and circumferential soils lateral movements; (2) peripheral soil deflection in layers and ground settlements; and (3) pit basal heave. The results from the field instrumentation showed that deflections of the site were strictly controlled and had no large movements that might lead to damage to the stability of the foundation pit. The field performance of another 21 cylindrical excavations in top-down method were collected to compare with this case through statistical analysis. In addition, numerical analyses were conducted to compare with the observed data. The extensively monitored data are characterized and analyzed in this paper.展开更多
Ground deformation as observed with GPS or InSAR has been broadly inverted in constraining source parameter of earthquakes. However, for earthquakes occurring beneath sedimentary basins, the very slow sub-surface shea...Ground deformation as observed with GPS or InSAR has been broadly inverted in constraining source parameter of earthquakes. However, for earthquakes occurring beneath sedimentary basins, the very slow sub-surface shear velocity (v S , down to 200 m/s) may cause substantial bias to earthquake source inversion if simple crustal models are used. For Bohai basin, Sichuan basin and rock-sites, we test effects of sub-surface shear velocity structure on ground deformation, and find that up to a factor of 2 overestimate of seismic moment could be generated by the basin structures. Therefore, the very slow sub-surface velocity has to be taken into account before accurate source inversion can be applied.展开更多
Based on three-dimensional joint finite element, this paper discusses the theory and methodology about inversionof geodetic data. The FEM and inversion formula is given in detail; also a related code is developed. By ...Based on three-dimensional joint finite element, this paper discusses the theory and methodology about inversionof geodetic data. The FEM and inversion formula is given in detail; also a related code is developed. By use of theGreen's function about 3-D FEM, we invert geodetic measurementS of coseismic deformation of the 1989 Ms=7. 1Loma Prieta earthquake to datermine itS source mechanism. The result indicates that the slip on the fault plane isvery heterogeneous. The maximum slip and shear stress are located about 10 kin to northwest of the eathquakesource, the stress drop is about more than 1 MPa.展开更多
This article analyzes the relationship between the water level and the water-tube tilting in Shuangyang lake,based on the differential deformation features reflected by the NS and EW components of the water-tube tiltm...This article analyzes the relationship between the water level and the water-tube tilting in Shuangyang lake,based on the differential deformation features reflected by the NS and EW components of the water-tube tiltmeter.The results show a good spatiotemporal consistency between the variation of water level and the NS tilt component,which is considered to be affected by the magnitude and duration of the water level variation in Shuangyang Lake.The article uses Landsat remote sensing image data to extract the water boundary of Shuan-gyang Lake,and takes advantage of the finite element numerical simulation method to build three-dimensional models for different geological structural conditions of the Shuangyang seismostation.The simulation results show that when the underground medium is granite,the effect of water level variation on the vertical displacement of the surface is non-directional.With a 50-m soil layer in Model 2,the simulated NS tilt variation is equivalent to the actual observed water-tube tiltmeter NS component when the water level variation is 0.44 m and 0.8m.When the variation of water level reaches 2.0m,the simulation result of the NS component is 79.6 ms,which is slightly larger than the observed result of 60.32 ms.However,the simulation results show that the variation of the EW component is significantly smaller than that of the NS one.Due to the fact that the Shuan-gyang lake is long in the NS direction and short in the EW direction,the existence of the soil layer tends to generate ground deformation along the NS direction in the vicinity of the lake after the increase of water level,thereby resulting in the difference of the ground deformation in the two directions.展开更多
Case studies are presented for two concrete lined channels shaken by strong ground motions during the 1994 Northridge earthquake, the high speed channel (HSC) and bypass channel (BC), on the Los Angeles Department...Case studies are presented for two concrete lined channels shaken by strong ground motions during the 1994 Northridge earthquake, the high speed channel (HSC) and bypass channel (BC), on the Los Angeles Department of Water and Power's Van Norman Complex. Performances of these two channels as they pass through different subsurface materials identify several important seismic aspects and the critical role of geotechnical earthquake engineering in assessing channel behaviors. Preliminary evaluations using detailed mapping of channel cracks, permanent ground movements, subsurface profiles, and nearby strong ground motion recordings from the 1994 earthquake show that the channel liners may have been damaged from both transient motions and permanent ground movements. Damage from permanent ground deformations is obvious by observation; therefore simplified analyses are presented only for transient movements. Site specific transient response analyses are performed to provide an initial assessment of the differing effects from transient and permanent ground movements on HSC and BC liner damage. These case studies are helpful for introducing the potential for lifeline damage from transient movements within zones of permanent ground movement, a concept not well understood in the earthquake engineering community展开更多
In order to solve the problems in the observation with the SS-Y extensometer, such as background noise and discontinuity of earth tide curve, this paper proposed to improve the stability of the instrument and the smoo...In order to solve the problems in the observation with the SS-Y extensometer, such as background noise and discontinuity of earth tide curve, this paper proposed to improve the stability of the instrument and the smoothness of the earth tide curve by improving the baseline structure of the instrument. In this study, a new φ20*1.2 invar tube was introduced in replacement of the existing φ6 invar rod as the baseline of the instrument and compared with the existing φ6 invar rod on the instrument’s linearity,sensitivity and other indexes. Firstly, the SS-Y extensometers using φ6 invar rod and cp20*1.2 invar tube were tested. Test results were then calculated, and accuracy errors of the instruments based on the two baselines were obtained. Finally, their accuracy errors and earth tide curves were compared. Results showed that, compared with the extensometer based on the existing φ6 invar rod, the extensometer based on the new φ20*1.2 invar tube was superior in performance, with linearity error reducing to 0.495% from 0.937%, sensitivity increasing to 68.65 mV/μm from 65.46 mV/μm, and earth tide curve growing more stable and continuous.展开更多
Rectangular pipe jacking or box jacking has become more popular in municipal applications because of its better adaptability to shallow overburdens and its higher structural section utilization than the conventional c...Rectangular pipe jacking or box jacking has become more popular in municipal applications because of its better adaptability to shallow overburdens and its higher structural section utilization than the conventional circular pipe jacking.This case study presents a utility tunnel constructed by using rectangular box jacking in Suzhou,China.The utility tunnel,which has a cross section of 9.1 m in width and 5.5 m in height,was jacked 233.6 m,which is the longest known single jacking length of a rectangular box jacking project in China.The box jacking mainly passed through a silty sand layer with high groundwater levels with a minimum depth of cover of only 3.5 m underneath the Yuanhetang River.In this zone,the structures on the surface are sensitive to external disturbance,thus increasing the challenges of construction.A series of measures were taken during the jacking process,and the project was successfully completed.This paper provides an overview of this project and introduces key techniques in the construction of working shafts as well as in the installation and retrieval of the box jacking machine.In addition,the use of lubrication to reduce friction resistance,navigation and application of an anti-buoyancy slab under the Yuanhetang River,and analyses of soil deformation caused by box jacking are described.展开更多
Due to the fast growth of urban areas worldwide,the demand for tunnels in developed areas is increasing.The design and construc-tion of those tunnels are complex because of their shallow depths and their interaction w...Due to the fast growth of urban areas worldwide,the demand for tunnels in developed areas is increasing.The design and construc-tion of those tunnels are complex because of their shallow depths and their interaction with existing aboveground and buried structures,which results in rather limited allowable ground deformations induced by the tunnel excavation and support.In tropical regions,residual porous soils near the surface are common.Those soils are highly deformable;thus,tunneling may induce large ground deformations that may damage nearby structures.The new Austrian tunneling method(NATM)and the sprayed concrete lining(SCL)technique are being widely employed in several big cities in tropical regions,but little research has been conducted to assess the induced ground deformations in residual soils,common in tropical areas.This paper provides insight into this issue.A well-documented metro tunnel in Sa˜o Paulo,Brazil,in a residual red porous clay,was analyzed using 3D finite element method(FEM).The behavior of the residual red porous clay was approximated by an advanced constitutive soil model calibrated with triaxial tests on intact samples extracted at the site.Predictions of the tunnel deformations during construction matched the field data.The calibrated model was then used to explore the tunnel per-formance under different construction strategies.The influence of partial face excavation,unsupported span length,support stiffness and pipe roof umbrella were assessed.The numerical results showed that partial face excavation was effective to reduce ground deformations ahead of the face of the tunnel and to improve face stability;however,the settlements behind the face increased because of the delay in closing the primary lining.The installation of a stiffer liner closer to the face reduced the ground deformations significantly.The pipe roof umbrella was the most effective technique to reduce the ground deformations around the tunnel;however,the numerical results did not consider deformations that could be induced by the drilling and grouting operations.The results shown in this paper provide both qual-itative and quantitative information about the ground deformations induced by NATM tunneling in residual porous soils,that could help designers and contractors choose the optimum support and construction methods to minimize ground deformations.展开更多
Coseismic folds induced by blind thrust faults have been observed in many earthquake zones, and they have received widespread attention from geologists and geophysicists. Numerous studies have been conducted regarding...Coseismic folds induced by blind thrust faults have been observed in many earthquake zones, and they have received widespread attention from geologists and geophysicists. Numerous studies have been conducted regarding fold kinematics; however, few have studied fold dynamics quantitatively. In this paper, we establish a conceptual model with a thrust fault zone and tectonic stress load to study the factors that affect coseismic folds and their formation mechanisms using the finite element method. The numerical results show that the fault dip angle is a key factor that controls folding. The greater the dip angle is, the steeper the fold slope. The second most important factor is the overburden thickness. The thicker the overburden is, the more gradual the fold. In this case, folds are difficult to identify in field surveys. Therefore, ifa fold can be easily identified with the naked eye, the overburden is likely shallow. The least important factors are the mechanical parameters of the overburden. The larger the Young's modulus of the overburden is, the smaller the displacement of the fold and the fold slope. Strong horizontal compression and vertical extension in the overburden near the fault zone are the main mechanisms that form coseismic folds.展开更多
We propose a finite-difference ghost-point approach for the numerical solution of Cauchy-Navier equations in linear elasticity problems on arbitrary unbounded domains.The technique is based on a smooth coordinate tran...We propose a finite-difference ghost-point approach for the numerical solution of Cauchy-Navier equations in linear elasticity problems on arbitrary unbounded domains.The technique is based on a smooth coordinate transformation,which maps an unbounded domain into a unit square.Arbitrary geometries are defined by suitable level-set functions.The equations are discretized by classical nine-point stencil on interior points,while boundary conditions and high order reconstructions are used to define the field variables at ghost-points,which are grid nodes external to the domain with a neighbor inside the domain.The linear system arising from such discretization is solved by a multigrid strategy.The approach is then applied to solve elasticity problems in volcanology for computing the displacement caused by pressure sources.The method is suitable to treat problems in which the geometry of the source often changes(explore the effects of different scenarios,or solve inverse problems in which the geometry itself is part of the unknown),since it does not require complex re-meshing when the geometry is modified.Several numerical tests are successfully performed,which asses the effectiveness of the present approach.展开更多
Tunnels extend in large stretches with continuous lengths of up to hundreds of kilometers which are vulnerable to faulting in earthquake-prone areas.Assessing the interaction of soil and tunnel at an intersection with...Tunnels extend in large stretches with continuous lengths of up to hundreds of kilometers which are vulnerable to faulting in earthquake-prone areas.Assessing the interaction of soil and tunnel at an intersection with an active fault during an earthquake can be a beneficial guideline for tunnel design engineers.Here,a series of 4 centrifuge tests are planned and tested on continuous tunnels.Dip-slip suface faulting in reverse mechanism of 60°is modeled by a fault simulator box in a quasi-static manner.Failure mechanism,progression and locations of damages to the tunnels are assessed through a gradual increase in Permanent Ground Displacement(PGD).The ground surface deformations and strains,fault surface trace,fault scarp and the sinkhole caused by fault movement are observed here.These ground surface deformations are major threats to stability,safety and serviceability of the structures.According to the observations,the modeled tunnels are vulnerable to reverse fault rupture and but the functionality loss is not abrupt,and the tunnel will be able to tolerate some fault displacements.By monitoring the progress of damage states by increasing PGD,the fragility curves corresponding to each damage state were plotted and interpreted in related figures.展开更多
文摘Considering the joint effects of various factors such as temporal baseline, spatial baseline, thermal noise, the difference of Doppler centroid frequency and the error of data processing on the interference correlation, an optimum selection method of common master images for ground deformation monitoring based on the permanent scatterer and differential SAR interferometry (PS-DInSAR) technique is proposed, in which the joint correlation coeficient is used as the evaluation function. The principle and realization method of PS-DInSAR technology is introduced, the factors affecting the DInSAR correlation are analysed, and the joint correlation function model and its solution are presented. Finally an experiment for the optimum selection of common master images is performed by using 25 SAR images over Shanghai taken by the ERS-1/2 as test data. The results indicate that the optimum selection method for PS-DInSAR common master images is effective and reliable.
文摘Landslides are a frequent phenomenon on mountain Elgon, particularly in Bududa district on the SW side of this extinct shield volcano. Landslides have led to the destruction of property and loss of life we, therefore, need to monitor them. Monitoring how landslides build-up makes it possible to timely evacuate people and build barriers to protect property against damage by landslides. Residents in Bududa have reported cracks developing in the ground and houses. These cracks continue to grow, suggesting a future catastrophic event. Such an event may resemble the 2010 landslide in Bududa, which killed approximately 450 people and destroyed much property. In order to mitigate the consequences of a new landslide as much as possible, we monitored ground motion in Bududa in eleven stations from June 2018 to June 2019. Six-hour session GPS observations were made, and deformation was determined over the observation period, June to September 2018, September to November 2018, November 2018 to February 2019 and February to June 2019. A congruency test was performed to determine how significant the deformation was. It appeared that the ground deformation differed largely at various monitored stations, ranging from 0.004 to 0.076 m, 0.001 to 0.067 m and 0 to 0.078 m in the East, North and vertical directions respectively. The values indicate that most slopes in the district are unstable, particularly in the wet seasons, which implies that future landslides pose a high risk for society.
基金supported by the China Science National Foundation (No. 41372353)
文摘Shanghai has experienced the greatest land subsidence in China in the past sixty years and produced undesirable environmental impact. However, horizontal ground deformation has not been understood yet. Therefore ground deformation monitoring together with the analysis of its driving forces are critical for geo-hazards early-warning, city planning and sustainable urbanization in Shanghai. In this paper, two-dimensional ground deformation monitoring was performed in Shanghai with SBAS and MSBAS InSAR methods. Twenty-nine Multi-Look Fine 6 (MF6) Radarsat-2 SLC data acquired during 2011-2013 were used to derive vertical ground deformation. Meanwhile, six descending Multi-Look Fine 6 (MF6) and four ascending Multi-Look Fine 2 (MF2) spanning April to August, 2008, were used to derive vertical and horizontal ground deformation during the observation period. The results indicate that vertical and horizontal deformations in 2008 were not homogeneously distributed in different districts ranging from 0-2 cm/year. Vertical deformation rate during 2011-2013 were decreased to less than 1 cm/year in most district of Shanghai area. Activities from groundwater exploitation and rapid urbanization are responsible for most of the ground deformation in Shanghai. Thus, future ground deformation in vertical and horizontal directions should be warranted.
基金This work is supported by the Key Water Science and Technology Project of Zhejiang Province(No.RB2027)the Zhejiang Province Public Welfare Technology Application Research Project(No.LGG22E080002),China.
文摘When tunnels are constructed in coastal cities,they will inevitably undercross a river.Exploring the influence of rivers on tunnelling-induced deformation in costal soft soil is of great significance for controlling excessive settlement and protecting surrounding buildings.This paper presents a case study of twin tunnels undercrossing a river in soft soil in Hangzhou,China.The soft soil of Hangzhou refers to cohesive soil in a soft plastic or fluid plastic state with high natural water content,high compressibility,low bearing capacity,and low shear strength.Considering the influence of the river,the research region was divided into two parts,inside and outside the river-affected area,based on monitoring data of the Zizhi Tunnel.The development law of surface settlement is divided into three stages.In the first and second stages,the surface settlement within and outside the river-affected area showed a similar trend:the settlement increased and the growth rate of settlement in the second stage was smaller within the river-affected area.In the third stage,the surface settlement continued to increase within the river-affected area,while it converged outside the river-affected area.Within the river-affected area,there was an asynchronization of the sinking rate and stability of vault settlements and surface settlements.A numerical model was established by simulating different reinforcements of the tunnel.The numerical model revealed that the ground movement is influenced by the distribution and amount of the excess pore water pressure.The excess pore pressure was concentrated mostly in the range of 1.0H_(t)-3.0H_(t)(H_(t) is the tunnel height)before the tunnel face,especially within the river-affected area.Inside the river-affected area,the dissipation of excess pore water pressure needs more time,leading to slow stabilization of surface settlement.When undercrossing a river,a cofferdam is necessary to reduce excessive ground deformation by dispersing the distribution of excess pore water pressure.
基金International Institute of Earthquake Engineering and Seismology(IIEES)under Grant No.AM-7/507-6 723-545
文摘Lateral deformation of liquefiable soil is a cause of much damage during earthquakes, reportedly more than other forms of liquefaction-induced ground failures. Researchers have presented studies in which the liquefied soil is considered as viscous fluid. In this manner, the liquefied soil behaves as non-Newtonian fluid, whose viscosity decreases as the shear strain rate increases. The current study incorporates computational fluid dynamics to propose a simplified dynamic analysis for the liquefaction-induced lateral deformation of earth slopes. The numerical procedure involves a quasi-linear elastic model for small to moderate strains and a Bingham fluid model for large strain states during liquefaction. An iterative procedure is considered to estimate the strain-compatible shear stiffness of soil. The post-liquefaction residual strength of soil is considered as the initial Bingham viscosity. Performance of the numerical procedure is examined by using the results of centrifuge model and shaking table tests together with some field observations of lateral ground deformation. The results demonstrate that the proposed procedure predicts the time history of lateral ground deformation with a reasonable degree of precision.
基金supported by the National Natural Science Foundation of China(Grant Nos.42225702,42077235 and 41722209).
文摘To analyze the pipeline response under permanent ground deformation,the evolution of resistance acting on the pipe during the vertical downward offset is an essential ingredient.However,the efficient simulation of pipe penetration into soil is challenging for the conventional finite element(FE)method due to the large deformation of the surrounding soils.In this study,the B-spline material point method(MPM)is employed to investigate the pipe-soil interaction during the downward movement of rigid pipes buried in medium and dense sand.To describe the density-and stress-dependent behaviors of sand,the J2-deformation type model with state-dependent dilatancy is adopted.The effectiveness of the model is demonstrated by element tests and biaxial compression tests.Afterwards,the pipe penetration process is simulated,and the numerical outcomes are compared with the physical model tests.The effects of pipe size and burial depth are investigated with an emphasis on the mobilization of the soil resistance and the failure mechanisms.The simulation results indicate that the bearing capacity formulas given in the guidelines can provide essentially reasonable estimates for the ultimate force acting on buried pipes,and the recommended value of yield displacement may be underestimated to a certain extent.
基金This work was conducted at the Physical Modeling and Centrifuge Laboratory of the Soil Mechanics and Foundation Engineering Department in the School of Civil Engineering,University of Tehran
文摘Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method.The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches.This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting.The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods.The influence of factors such as faulting offset,burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated.Finally,the tensile rupture of a pipeline due to normal faulting is investigated.
基金National Science Foundation Under Grant No.CMS-0085256
文摘A new centrifuge based method for determining the response of continuous buried pipe to PGD is presented. The physical characteristics of the RPI's 100 g-ton geotechnical centrifuge and the current lifeline experiment split-box are described: The split-box contains the model pipeline and surrounding soil and is manufactured such that half can be offset, in flight, simulating PGD. In addition, governing similitude relations which allow one to determine the physical characteristics, (diameter, wall thickness and material modulus of elasticity) of the model pipeline are presented. Finally, recorded strains induced in two buried pipes with prototype diameters of 0.63 m and 0.95 m (24 and 36 inch) subject to 0.6 and 2.0 meters (2 and 6 feet) of full scale fault offsets and presented and compared to corresponding FE results.
基金This paper is supported by National Natural Science Foundation of China (Grant No. 51768065). The field monitoring measurements used in this paper were made available to the writers through the efforts of many organizations and individuals involved with the construction and inspection of the foundation pit of the Shanghai Center project. Special thanks to SGIDI for facilitating access to field data, In addition, the writers would like to acknowledge the support of Ms. Yashuang Bai and Mr. Yuxia Ji for data compilation and figures processing. Any views and opinions expressed in this case study are those of the writers and do not necessarily represent the views of the organizations or other individuals responsible for the design and construction of this project,
文摘Empirical data on deep urban excavations can provide designers a significant reference basis for assessing potential deformations of the deep excavations and their impact on adjacent structures. The construction of the Shanghai Center involved excavations in excess of 33-m-deep using the top-down method at a site underlain by thick deposits of marine soft clay. A retaining system was achieved by 50-m-deep diaphragm walls with six levels of struts. During construction, a comprehensive instrumentation program lasting 14 months was conducted to monitor the behaviors of this deep circular excavation. The following main items related to ground surface movements and deformations were collected: (1) walls and circumferential soils lateral movements; (2) peripheral soil deflection in layers and ground settlements; and (3) pit basal heave. The results from the field instrumentation showed that deflections of the site were strictly controlled and had no large movements that might lead to damage to the stability of the foundation pit. The field performance of another 21 cylindrical excavations in top-down method were collected to compare with this case through statistical analysis. In addition, numerical analyses were conducted to compare with the observed data. The extensively monitored data are characterized and analyzed in this paper.
基金supported by National Natural Science Foundation of China (Nos.40821160549 and 41074032)Chinese Academy of Sciences fund (No. KZCX2-YW-116-1)Joint Seismological Science Foundation of China (200808078)
文摘Ground deformation as observed with GPS or InSAR has been broadly inverted in constraining source parameter of earthquakes. However, for earthquakes occurring beneath sedimentary basins, the very slow sub-surface shear velocity (v S , down to 200 m/s) may cause substantial bias to earthquake source inversion if simple crustal models are used. For Bohai basin, Sichuan basin and rock-sites, we test effects of sub-surface shear velocity structure on ground deformation, and find that up to a factor of 2 overestimate of seismic moment could be generated by the basin structures. Therefore, the very slow sub-surface velocity has to be taken into account before accurate source inversion can be applied.
文摘Based on three-dimensional joint finite element, this paper discusses the theory and methodology about inversionof geodetic data. The FEM and inversion formula is given in detail; also a related code is developed. By use of theGreen's function about 3-D FEM, we invert geodetic measurementS of coseismic deformation of the 1989 Ms=7. 1Loma Prieta earthquake to datermine itS source mechanism. The result indicates that the slip on the fault plane isvery heterogeneous. The maximum slip and shear stress are located about 10 kin to northwest of the eathquakesource, the stress drop is about more than 1 MPa.
基金sponsored by National Key Research and Development Program of China(2018YFC0807000)The Spark Program of Earthquake Technology of CEA(XH20070Y)The Earthquake Tracking Task of CEA(2021010221).
文摘This article analyzes the relationship between the water level and the water-tube tilting in Shuangyang lake,based on the differential deformation features reflected by the NS and EW components of the water-tube tiltmeter.The results show a good spatiotemporal consistency between the variation of water level and the NS tilt component,which is considered to be affected by the magnitude and duration of the water level variation in Shuangyang Lake.The article uses Landsat remote sensing image data to extract the water boundary of Shuan-gyang Lake,and takes advantage of the finite element numerical simulation method to build three-dimensional models for different geological structural conditions of the Shuangyang seismostation.The simulation results show that when the underground medium is granite,the effect of water level variation on the vertical displacement of the surface is non-directional.With a 50-m soil layer in Model 2,the simulated NS tilt variation is equivalent to the actual observed water-tube tiltmeter NS component when the water level variation is 0.44 m and 0.8m.When the variation of water level reaches 2.0m,the simulation result of the NS component is 79.6 ms,which is slightly larger than the observed result of 60.32 ms.However,the simulation results show that the variation of the EW component is significantly smaller than that of the NS one.Due to the fact that the Shuan-gyang lake is long in the NS direction and short in the EW direction,the existence of the soil layer tends to generate ground deformation along the NS direction in the vicinity of the lake after the increase of water level,thereby resulting in the difference of the ground deformation in the two directions.
文摘Case studies are presented for two concrete lined channels shaken by strong ground motions during the 1994 Northridge earthquake, the high speed channel (HSC) and bypass channel (BC), on the Los Angeles Department of Water and Power's Van Norman Complex. Performances of these two channels as they pass through different subsurface materials identify several important seismic aspects and the critical role of geotechnical earthquake engineering in assessing channel behaviors. Preliminary evaluations using detailed mapping of channel cracks, permanent ground movements, subsurface profiles, and nearby strong ground motion recordings from the 1994 earthquake show that the channel liners may have been damaged from both transient motions and permanent ground movements. Damage from permanent ground deformations is obvious by observation; therefore simplified analyses are presented only for transient movements. Site specific transient response analyses are performed to provide an initial assessment of the differing effects from transient and permanent ground movements on HSC and BC liner damage. These case studies are helpful for introducing the potential for lifeline damage from transient movements within zones of permanent ground movement, a concept not well understood in the earthquake engineering community
基金supported by the National Natural Science Foundation(41274037)
文摘In order to solve the problems in the observation with the SS-Y extensometer, such as background noise and discontinuity of earth tide curve, this paper proposed to improve the stability of the instrument and the smoothness of the earth tide curve by improving the baseline structure of the instrument. In this study, a new φ20*1.2 invar tube was introduced in replacement of the existing φ6 invar rod as the baseline of the instrument and compared with the existing φ6 invar rod on the instrument’s linearity,sensitivity and other indexes. Firstly, the SS-Y extensometers using φ6 invar rod and cp20*1.2 invar tube were tested. Test results were then calculated, and accuracy errors of the instruments based on the two baselines were obtained. Finally, their accuracy errors and earth tide curves were compared. Results showed that, compared with the extensometer based on the existing φ6 invar rod, the extensometer based on the new φ20*1.2 invar tube was superior in performance, with linearity error reducing to 0.495% from 0.937%, sensitivity increasing to 68.65 mV/μm from 65.46 mV/μm, and earth tide curve growing more stable and continuous.
文摘Rectangular pipe jacking or box jacking has become more popular in municipal applications because of its better adaptability to shallow overburdens and its higher structural section utilization than the conventional circular pipe jacking.This case study presents a utility tunnel constructed by using rectangular box jacking in Suzhou,China.The utility tunnel,which has a cross section of 9.1 m in width and 5.5 m in height,was jacked 233.6 m,which is the longest known single jacking length of a rectangular box jacking project in China.The box jacking mainly passed through a silty sand layer with high groundwater levels with a minimum depth of cover of only 3.5 m underneath the Yuanhetang River.In this zone,the structures on the surface are sensitive to external disturbance,thus increasing the challenges of construction.A series of measures were taken during the jacking process,and the project was successfully completed.This paper provides an overview of this project and introduces key techniques in the construction of working shafts as well as in the installation and retrieval of the box jacking machine.In addition,the use of lubrication to reduce friction resistance,navigation and application of an anti-buoyancy slab under the Yuanhetang River,and analyses of soil deformation caused by box jacking are described.
文摘Due to the fast growth of urban areas worldwide,the demand for tunnels in developed areas is increasing.The design and construc-tion of those tunnels are complex because of their shallow depths and their interaction with existing aboveground and buried structures,which results in rather limited allowable ground deformations induced by the tunnel excavation and support.In tropical regions,residual porous soils near the surface are common.Those soils are highly deformable;thus,tunneling may induce large ground deformations that may damage nearby structures.The new Austrian tunneling method(NATM)and the sprayed concrete lining(SCL)technique are being widely employed in several big cities in tropical regions,but little research has been conducted to assess the induced ground deformations in residual soils,common in tropical areas.This paper provides insight into this issue.A well-documented metro tunnel in Sa˜o Paulo,Brazil,in a residual red porous clay,was analyzed using 3D finite element method(FEM).The behavior of the residual red porous clay was approximated by an advanced constitutive soil model calibrated with triaxial tests on intact samples extracted at the site.Predictions of the tunnel deformations during construction matched the field data.The calibrated model was then used to explore the tunnel per-formance under different construction strategies.The influence of partial face excavation,unsupported span length,support stiffness and pipe roof umbrella were assessed.The numerical results showed that partial face excavation was effective to reduce ground deformations ahead of the face of the tunnel and to improve face stability;however,the settlements behind the face increased because of the delay in closing the primary lining.The installation of a stiffer liner closer to the face reduced the ground deformations significantly.The pipe roof umbrella was the most effective technique to reduce the ground deformations around the tunnel;however,the numerical results did not consider deformations that could be induced by the drilling and grouting operations.The results shown in this paper provide both qual-itative and quantitative information about the ground deformations induced by NATM tunneling in residual porous soils,that could help designers and contractors choose the optimum support and construction methods to minimize ground deformations.
基金We would like to thank the anonymous reviewers for their constructive comments. This research was funded by the National Natural Science Foundation of China (Grant No. 41474080).
文摘Coseismic folds induced by blind thrust faults have been observed in many earthquake zones, and they have received widespread attention from geologists and geophysicists. Numerous studies have been conducted regarding fold kinematics; however, few have studied fold dynamics quantitatively. In this paper, we establish a conceptual model with a thrust fault zone and tectonic stress load to study the factors that affect coseismic folds and their formation mechanisms using the finite element method. The numerical results show that the fault dip angle is a key factor that controls folding. The greater the dip angle is, the steeper the fold slope. The second most important factor is the overburden thickness. The thicker the overburden is, the more gradual the fold. In this case, folds are difficult to identify in field surveys. Therefore, ifa fold can be easily identified with the naked eye, the overburden is likely shallow. The least important factors are the mechanical parameters of the overburden. The larger the Young's modulus of the overburden is, the smaller the displacement of the fold and the fold slope. Strong horizontal compression and vertical extension in the overburden near the fault zone are the main mechanisms that form coseismic folds.
基金the OTRIONS project under the European Territorial Cooperation Programme Greece-Italy 2007-2013,and by PRIN 2009“Innovative numerical methods for hyperbolic problems with applications to fluid dynamics,kinetic theory and computational biology”.
文摘We propose a finite-difference ghost-point approach for the numerical solution of Cauchy-Navier equations in linear elasticity problems on arbitrary unbounded domains.The technique is based on a smooth coordinate transformation,which maps an unbounded domain into a unit square.Arbitrary geometries are defined by suitable level-set functions.The equations are discretized by classical nine-point stencil on interior points,while boundary conditions and high order reconstructions are used to define the field variables at ghost-points,which are grid nodes external to the domain with a neighbor inside the domain.The linear system arising from such discretization is solved by a multigrid strategy.The approach is then applied to solve elasticity problems in volcanology for computing the displacement caused by pressure sources.The method is suitable to treat problems in which the geometry of the source often changes(explore the effects of different scenarios,or solve inverse problems in which the geometry itself is part of the unknown),since it does not require complex re-meshing when the geometry is modified.Several numerical tests are successfully performed,which asses the effectiveness of the present approach.
文摘Tunnels extend in large stretches with continuous lengths of up to hundreds of kilometers which are vulnerable to faulting in earthquake-prone areas.Assessing the interaction of soil and tunnel at an intersection with an active fault during an earthquake can be a beneficial guideline for tunnel design engineers.Here,a series of 4 centrifuge tests are planned and tested on continuous tunnels.Dip-slip suface faulting in reverse mechanism of 60°is modeled by a fault simulator box in a quasi-static manner.Failure mechanism,progression and locations of damages to the tunnels are assessed through a gradual increase in Permanent Ground Displacement(PGD).The ground surface deformations and strains,fault surface trace,fault scarp and the sinkhole caused by fault movement are observed here.These ground surface deformations are major threats to stability,safety and serviceability of the structures.According to the observations,the modeled tunnels are vulnerable to reverse fault rupture and but the functionality loss is not abrupt,and the tunnel will be able to tolerate some fault displacements.By monitoring the progress of damage states by increasing PGD,the fragility curves corresponding to each damage state were plotted and interpreted in related figures.