Mining-induced movement properties and fissure time-space evolution law in overlying strata

Mining-induced fracture zone will be produced in the overlying strata after the coal was mined.In this article,the mining-induced deformation of overlying strata and the time-space evolution law of fissure were studied by the methods of physical simulation and field measurement.The results show that bed separation fissure and vertical fissure will appear in the overlying strata above mining face,which form the wedge-shaped fissure zone.The open degree of fissure depends on the size of uncoordinated deformation between neighbor layers,and the absolute strata sinking controls both the width of bed separation zone and the open degree of vertical breakage fissure.At last,the calculating formula was deducted based on theoretical analysis.

Practice and technical approach of GPS observation of mining-induced ground subsidence

The base vector between 2 poins and a high-precision geodetic height difference can be obtained by GPS. If the geodetic height of a point is known, the geodetic height of each observation point in a net can be obtained. When surveying the subsidence value in the mining-induced ground subsidence, the change of the height of monitoring point is needed. On the above theoretical basis, the problem involved in GPS observation of mining-induced ground subsidence and their counter measures were discussed, and an introduction was made that the subsidence value obtained in the monitoring mining-induced ground subsidence can use the change of height of geodetic as a alternative, the result of check on the accuracy and reliability of repetitions observations was analysed. Finally, the effect of errors on accuracy of GPS observation and their reduction measures were elaborated.

Ground movement mechanism in tectonic stress metal mines with steep structure planes

When mining metal mines with steep structure planes by the caving method,there is a mechanical model in which the horizontal stress on the rock mass is simplified as a column before surface subsidence.The model is used to deduce critical support load and limiting column length for a given horizontal stress and support pressure.Considering the impact of the column effect,a method is proposed to determine the movement of the ground and caving area in a mine.After surface subsidence,the horizontal stress on a surrounding rock mass can be simplified to a cantilever beam mechanical model.Expressions for its bending fracture length are deduced,and a method is given to determine its stability.On this basis,an explanation for the large ground movement and subsidence scope was given.A case study shows that the damage effect of column and cantilever beam is significant for ground movement in metal-ore mine,and an appropriate correction value should be applied when designing for its angle of ground movements.

Horizontal aquifer movement induced by groundwater pumping and its applications to the analysis of some geological disasters

Based on Darcy Gersevanov law concerning a flow relation between water and solids, we derive the horizontal movement of solid frame resulted from a discharging well in a Theis Thiem confined system, and further analyze the relations among the horizontal movements and pumped time t as well as radius r from the discharging well. As applications of the theory, we propose some new interperations for ground fissure activity and casing failures induced by groundwater withdrawal or injection.

Law governing strata and ground movement due to sub-critical extraction

The strata movement induced by sub-critical extraction is a problem not receiving due attention because of its relatively small magnitude of deformation. However, with the increase of mining depth, sub-critical extraction has become a general phenomenon. This calls for an in-depth investigation into the characteristics of ground movements observed under different extents of sub-critical extraction, so as to determine the appropriate mining technique for use. Following a discussion of the factors influencing the extent of super-critical extraction, the super-critical extraction extent evaluation criteria was presented, the characteristics and laws of the strata and ground movements caused by such an extraction condition were systematically analyzed, and the mechanism of surface subsidence induced by sub-critical extraction was revealed. The result of study may serve as a basis for the development of the strata and ground movement prediction model and the mining techniques appropriate for use at depth beneath surface structures and buildings.

A Bilevel Programming Approach for Optimization of Airport Ground Movement

This paper proposes an optimization model for the airport ground movement problem(GMP)based on bilevel programming to address taxi conflicts on the airport ground and to improve the operating safety and efficiency.To solve GMP,an iterative heuristic algorithm is designed.Instead of separately investigating each problem,this model simultaneously coordinates and optimizes the aircraft routing and scheduling.A simulation test is conducted on Nanjing Lukou International Airport(NKG)and the results show that the bilevel programming model can clearly outperform the widely used first-come-first-service(FCFS)scheduling scheme in terms of aircraft operational time under the precondition of none conflict.The research effort demonstrates that with the reduced operating cost and the improved overall efficiency,the proposed model can assist operations of the airports that are facing increasing traffic demand and working at almost maximum capacity.

GPS monitoring and analysis of ground movement and deformation induced by transition from open-pit to underground mining

To trace the potential hazards of open-pit slope in Longshou mine,global positioning system（GPS） is applied to monitoring ground movement and deformation induced by transition from open-pit to underground mining.Through long-term monitoring from 2003 to 2008,huge amounts of data were acquired.Monitoring results show that large-scale ground movement and deformation have occurred in mining area,and the movement area is ellipse-shaped.The displacement boundary of settlement trough is 2.0 km long along the exploratory line,and 1.5 km long along the strike of ore body.GPS monitoring results basically agree with the practical deformation state of open-pit slope.It is indicated that the long-term GPS monitoring is an effective way to understand the mechanism of ground movement and deformation in mine area. 更多

Ground movement induced by triple stacked tunneling with different construction sequences

This study tried to explore the ground movement induced by triple stacked tunneling(TST) with different construction sequences. A case study in Tianjin, China was used to investigate the ground movement during the TST(upper tunneling(UT)). For this, a modified Peck formula was proposed to predict the surface settlement induced by TST. Next, three sets of finite element analyses(FEA) were used to compare the effects of construction sequences(i.e. UT, middle tunneling(MT), and lower tunneling(LT)) on vertical and lateral ground displacements. The results of Tianjin case and UT reveal that compared to a Gaussian distribution for a single tunnel, the surface settlement curve of triple stacked tunnels is a bimodal distribution. It seems that the proposed modified Peck formula can effectively predict the surface settlement induced by TST. The results of the three sets of FEA demonstrate that the construction sequence has a significant influence on the ground movement. Among the three construction sequences, the largest lateral displacement is observed in the MT and the smallest one in UT.The existing tunnel has an inhibitory effect on the vertical displacement. The maximum value of the lateral displacement occurs at the depth of the new tunnel in each construction sequence.

Mechanical behaviors of coal measures and ground control technologies for China's deep coal mines-A review

This paper reviews the major achievements in terms of mechanical behaviors of coal measures,mining stress distribution characteristics and ground control in China’s deep underground coal mining.The three main aspects of this review are coal measure mechanics,mining disturbance mechanics,and rock support mechanics.Previous studies related to these three topics are reviewed,including the geo-mechanical properties of coal measures,distribution and evolution characteristics of mining-induced stresses,evolution characteristics of mining-induced structures,and principles and technologies of ground control in both deep roadways and longwall faces.A discussion is made to explain the structural and mechanical properties of coal measures in China’s deep coal mining practices,the types and dis-tribution characteristics of in situ stresses in underground coal mines,and the distribution of mining-induced stress that forms under different geological and engineering conditions.The theory of pre-tensioned rock bolting has been proved to be suitable for ground control of deep underground coal roadways.The use of combined ground control technology(e.g.ground support,rock mass modification,and destressing)has been demonstrated to be an effective measure for rock control of deep roadways.The developed hydraulic shields for 1000 m deep ultra-long working face can effectively improve the stability of surrounding rocks and mining efficiency in the longwall face.The ground control challenges in deep underground coal mines in China are discussed,and further research is recommended in terms of theory and technology for ground control in deep roadways and longwall faces.

Monitoring of ground subsidence movements over territory of mines being flooded in Budyonnovsky and Proletarsky districts in Donetsk city with help of GPS-technology

This paper considers the processes of activation in ground subsidence movements in flooding mine workings of mines being liquidated in two districts in Donetsk city on the area of more than 60km^2. A concept is given to build up control network of geomechanical monitoring in conditions of existing old mining operations at shallow depths (down to 100m), strong damages of objects of urban building. Given are GPS network structure, layouts for location of basic and local profile lines, special control stations for monitoring ground subsidence movements over the territory of mines being flooded. Results of the series of observations made are discussed and their accuracy is analyzed.

Ground subsidence mechanism of a filling mine with a steeply inclined ore body

Long-term field monitoring finds that serious surface subsidence can still occur even if the high strength cemented fill method is adopted.Combining the results of numerical simulations with global position system(GPS)monitoring,we took a typical filling mining mine with a steeply inclined ore body as an example,and explored its ground subsidence mechanism.The results show that the ground subsidence caused by the mining of steep ore body is characterized by two settlement centers and a significantly uneven spatial distribution,which is visibly different from ground subsidence characteristic of the coal mine.The subsidence on the hanging wall is much larger than that on the footwall,and the settlement center tends to move to the hanging wall with the increase of mining depth.The backfill improves the strength and surrounding rock bearing capacity,which leads to a lag of about 3 years of the subsidence.However,under the actions of continuous and repeated mining disturbances,the supporting effect of the backfill can only reduce the amplitude of the deformation,but it cannot prevent the occurrence of settlement.

陡倾结构金属矿山岩移规律的模型试验研究

陡倾地质结构金属矿床大部分形成于构造断裂带,崩落法开采会产生显著的岩层移动现象。以湖北黄石的金山店铁矿典型地质剖面为基础,构建地质结构模型。通过缩尺物理模型试验,研究陡倾地质结构对崩落法采矿岩层移动的影响规律。研究结果表明,受陡倾地质结构的影响,采空区岩层移动可分为缓慢增长、快速增长与地表塌陷破坏3个阶段,其中上盘岩移范围远大于下盘,上盘以倾倒变形破坏为主,下盘以剪切滑移破坏为主;采空区顶板岩层一方面不断崩落填充采空区控制岩移,另一方面形成冒落拱,以拱脚抵制上下盘陡倾岩层朝向采空区移动;当顶板崩落至地表后冒落拱的支撑作用消失,近采空区的上盘岩层发生倾倒折断塌陷,下盘岩层发生剪切滑移塌陷。

Centrifuge modeling of a large-scale surcharge on adjacent foundation

This study investigates the ground and structural response of adjacent raft foundations induced by largescale surcharge by ore in soft soil areas through a 130g centrifuge modeling test with an innovative layered loading device.The prototype of the test is a coastal iron ore yard with a natural foundation of deep soft soil.Therefore,it is necessary to adopt some measures to reduce the influence of the large-scale surcharge on the adjacent raft foundation,such as installing stone columns for foundation treatment.Under an acceleration of 130 g,the model conducts similar simulations of iron ore,stone columns,and raft foundation structures.The tested soil mass has dimensions of 900 mm×700 mm×300 mm(lengthwidthdepth),which is remodeled from the soil extracted from the drilling holes.The test conditions are consistent with the actual engineering conditions and the effects of four-level loading conditions on the composite foundation of stone columns,unreinforced zone,and raft foundations are studied.An automatic layer-by-layer loading device was innovatively developed to simulate the loading process of actual engineering more realistically.The composite foundation of stone columns had a large settlement after the loading,forming an obvious settlement trough and causing the surface of the unreinforced zone to rise.The 12 m surcharge loading causes a horizontal displacement of 13.19 cm and a vertical settlement of 1.37 m in the raft foundation.The stone columns located on both sides of the unreinforced zone suffered significant shear damage at the sand-mud interface.Due to the reinforcement effect of stone columns,the sand layer below the top of the stone columns moves less.Meanwhile,the horizontal earth pressure in the raft foundation zone increases slowly.The stone columns will form new drainage channels and accelerate the dissipation of excess pore pressure.

1999年中国台湾集集M_(W)7.6地震跨断层场地相对运动

为了获得近断层地震动准确的残余位移信息,提出了一种变步长网格搜索地震动基线校正方法。首先基于1999年我国台湾M_(W)7.6集集地震强震动数据,探讨了近断层地震动的位移特征,然后通过地震动时程初始时刻的校正获得了集集地震多组上、下盘台站之间的相对运动时程数据,分析了分别靠近断层上、下盘场地之间相对运动的位移时程特征。结果显示:近断层地震动的滑冲效应显著,断层的平均滑冲速度可高达1.4 m/s;断层两盘间的相对运动类似于近断层地震动的运动特征,且幅值更大;近断层的残余位移约是断层两盘间最大相对位移的80%.

Numerical and theoretical study of large-scale failure of strata overlying sublevel caving mines with steeply dipping discontinuities

The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of a steeply dipping superimposed cantilever beam in the surrounding rock was deduced based on limit equilibrium theory.The results show the following:(1)surface displacement above metal mines with steeply dipping discontinuities shows significant step characteristics,and(2)the behavior of the strata as they fail exhibits superimposition characteristics.Generally,failure first occurs in certain superimposed strata slightly far from the goaf.Subsequently,with the constant downward excavation of the orebody,the superimposed strata become damaged both upwards away from and downwards toward the goaf.This process continues until the deep part of the steeply dipping superimposed strata forms a large-scale deep fracture plane that connects with the goaf.The deep fracture plane generally makes an angle of 12°-20°with the normal to the steeply dipping discontinuities.The effect of the constant outward transfer of strata movement due to the constant outward failure of the superimposed strata in the metal mines with steeply dipping discontinuities causes the scope of the strata movement in these mines to be larger than expected.The strata in the metal mines with steeply dipping discontinuities mainly show flexural toppling failure.However,the steeply dipping structural strata near the goaf mainly exhibit shear slipping failure,in which case the mechanical model used to describe them can be simplified by treating them as steeply dipping superimposed cantilever beams.By taking the steeply dipping superimposed cantilever beam that first experiences failure as the key stratum,the failure scope of the strata(and criteria for the stability of metal mines with steeply dipping discontinuities mined using sublevel caving)can be obtained via iterative computations from the key stratum,moving downward toward and upwards away from the goaf.

厚煤区采动影响下电视信号塔调平纠偏技术应用研究

为解决煤厚变化区域地表移动变形造成广播电视信号铁塔基础沉降、塔身变形甚至失稳倾覆,影响电视信号铁塔正常安全运行、降低煤炭资源采出率的问题,对白坪煤业公司13031工作面地表电视信号铁塔进行了动态保护加固技术,在对地表移动和铁塔变形计算分析和现场监测的基础上,试验应用了铁塔地基精准注浆加固技术和动态调平保护技术,在铁塔基础及周边布置钻孔进行渗透注浆加固,提高地基强度、补偿地基下沉;改造固定铁塔基础为高度可调式基础,当铁塔基础倾斜度接近5 mm/m,及时通过塔基高度调节系统控制四个塔基高度,降低塔基倾斜变形。现场应用结果表明,13031工作面距电视信号铁塔中心-200~+180 m范围,出现塔基倾斜度2次大于4 mm/m,及时采用塔基动态调平装置对四个铁塔基础进行调平,工作面采动影响地表变形活动期铁塔倾斜度均小于许可上限5 mm/m,工作面回采期间广播电视信号铁塔正常安全运行。

关于中深井开采煤矿地表岩移观测的研究

随着地下煤炭资源的开采,造成的地表沉陷及带来的破坏问题越来越严重。以豫西A煤矿工作面为例,通过设置移动观测站来研究中深井煤矿开采所引起的地表岩层移动规律,以提高矿产资源的回收率,控制地表沉陷,为该矿区合理开采和保护煤柱的留设提供科学依据。

Influence of cement-fly ash-gravel pile-supported approach embankment on abutment piles in soft ground

Abutment piles in soft ground may be subjected to both vertical and horizontal soil movements resulting from approach embankment loads. To constrain the soil movements, the soft soil ground beneath the approach embankment is often improved using composite pile foundations, which aim at mitigating the bump induced by high-speed trains passing through the bridge. So far, there is limited literature on exploring the influence of the degree of ground improvement on abutment piles installed in soft soil grounds. In this paper, a series of three-dimensional （3D） centrifuge model tests was performed on an approach embankment over a silty clay deposit improved by cement-fly ash-gravel （CFG） piles combined with geogrid. Emphasis is placed on the effects of ground replacement ratio （m） on the responses of the abutment piles induced by embankment loads. Meanwhile, a numerical study was conducted with varying ground replacement ratio of the pile-reinforced grounds. Results show that the performance of the abutment piles is significantly improved when reinforcing the ground with CFG piles beneath the approach embankment. Interestingly, there is a threshold value of the replacement ratio of around 4.9% above which the effect of CFG pile foundations is limited. This implies that it is essential to optimize the ground improvement for having a cost-effective design while minimizing the risk of the bump at the end of bridge.

Subsidence rules of underground layer thickness： Lu＇an Coal Base coal mines for different soil as an example, China

Damage caused by underground coal mining is a serious problem in mining areas in China; therefore, studying and obtaining the rules of ground movement and deformation under different geological conditions is of great importance. The numerical software ANSYS was used in this study to simulate mining processes under two special geological conditions： （1） thick unconsolidated soil layer and thin bedrock; （2） thin soil layer and thick bedrock. The rules for ground movement and deformation for different soil layer to bedrock ratios were obtained. On the basis of these rules, a prediction parameter modified model of the influence function was proposed, which is suitable for different values of unconsolidated soil layer thickness. The prediction results were verified using two sets of typical field data.

Ground support design for dynamic loading conditions:A quantitative data-driven approach based on rockburst case studies

There are considerable challenges associated with the design of ground support for seismically-active underground mines.It is extremely difficult to establish the demand on ground support as well as the capacity of a ground support system.The resulting dynamic or impact loads caused by mining-induced seismicity are difficult to anticipate and quantify.The performance of a ground support system is defined by the load distribution and interaction between several reinforcement and surface support elements.Consequently,the design of ground support in seismically-active mines tends to evolve,or be modified based on qualitative assessments of perceived performance or response to significant seismic events or rockbursts.This research is motivated by a need to provide quantitative and data-driven design guidelines for ground support systems subjected to dynamic-loading conditions.Rockburst data were collected from three deep and seismically-active underground mines in the Sudbury basin in Canada.The constructed database comprises 209 seismic events that resulted in damage to mine excavations and ground support.These events were associated with damage at 324 locations within the three mines.The developed ground support design strategy,based on these documented case studies,identifies areas where the use of dynamic or enhanced support should be employed.The developed design methodology provides guidelines for the zoning of mine locations in which installation of enhanced support is recommended,the specifications for an optimal ground support system,and the timing or sequence of installation.