At 5:39 am on June 24, 2017, a landslide occurred in the village of Xinmo in Maoxian County, Aba Tibet and Qiang Autonomous Prefecture(Sichuan Province, Southwest China). On June 25, aerial images were acquired from a...At 5:39 am on June 24, 2017, a landslide occurred in the village of Xinmo in Maoxian County, Aba Tibet and Qiang Autonomous Prefecture(Sichuan Province, Southwest China). On June 25, aerial images were acquired from an unmanned aerial vehicle(UAV), and a digital elevation model(DEM) was processed. Landslide geometrical features were then analyzed. These are the front and rear edge elevation, accumulation area and horizontal sliding distance. Then, the volume and the spatial distribution of the thickness of the deposit were calculated from the difference between the DEM available before the landslide, and the UAV-derived DEM collected after the landslide. Also, the disaster was assessed using high-resolution satellite images acquired before the landslide. These include Quick Bird, Pleiades-1 and GF-2 images with spatial resolutions of 0.65 m, 0.70 m, and 0.80 m, respectively, and the aerial images acquired from the UAV after the landslide with a spatial resolution of 0.1 m. According to the analysis, the area of the landslide was 1.62 km2, and the volume of the landslide was 7.70 ± 1.46 million m3. The average thickness of the landslide accumulation was approximately 8 m. The landslide destroyed a total of 103 buildings. The area of destroyed farmlands was 2.53 ha, and the orchard area was reduced by 28.67 ha. A 2-km section of Songpinggou River was blocked and a 2.1-km section of township road No. 104 was buried. Constrained by the terrain conditions, densely populated and more economically developed areas in the upper reaches of the Minjiang River basin are mainly located in the bottom of the valleys. This is a dangerous area regarding landslide, debris flow and flash flood events Therefore, in mountainous, high-risk disaster areas, it is important to carefully select residential sites to avoid a large number of casualties.展开更多
With the increasing impact of climate change,carbon emissions and removals have become major issues.Forests are major carbon pools,and forest fires are an essential part of the carbon cycle.This study introduces a mod...With the increasing impact of climate change,carbon emissions and removals have become major issues.Forests are major carbon pools,and forest fires are an essential part of the carbon cycle.This study introduces a model for estimating the detailed actual CO_(2)removal in burned forests using burn severity and tree survivability.Actual CO_(2)removal was estimated from empirical yield tables without using the standard carbon removal provided by the national inventory.The primary CO_(2)calculation method followed the guidelines of the International Panel on Climate Change.The burn severity was mapped using Sentinel-2 multispectral instrument data,and the survivability of each forest type was estimated according to burn severity.The survivability was applied to the pre-fire CO_(2)removal of each forest to estimate post-fire CO_(2)removal.In our case study,the burned forest area was 1,034 ha,and the CO_(2)removal before the fire was 8,615.3t/year.After the fire,removal decreased by 81.2%to 1,618.4 t/yr.In particular,the decrease in coniferous forests was high,more than 86%.The lack of survivability data on burned trees was a major limitation of our study.Systematically accumulating field monitoring data of post-fire forests will be necessary for future research and could serve as a reference for devising immediate countermeasures against forest fires.展开更多
In this article, the extension to three dimensions (3D) of the blending technique that has been widely used in two dimensions (2D) to calibrate ocean chlorophyll is presented. The results thus obtained revealed a very...In this article, the extension to three dimensions (3D) of the blending technique that has been widely used in two dimensions (2D) to calibrate ocean chlorophyll is presented. The results thus obtained revealed a very high degree of efficiency when predicting observed values of ocean chlorophyll. The mean squared difference between the predicted and observed values of ocean chlorophyll when 3D technique was used fell far below the tolerance level which was set to the difference between satellite and observed in-situ values. The resulting blended field did not only provide better predictions of the in situ observations in areas where bottle samples cannot be obtained but also provided a smooth variation of the distribution of ocean chlorophyll throughout the year. An added advantage is its computational efficiency since data that would have been treated at least four times would be treated only once. With the advent of these results, it is believed that the modelling of the ocean life cycle will become more realistic.展开更多
Global ocean surface currents estimated from satellite derived data based on a regular global grid are affected by the grid’s shape and placement.Due to different neighbourhood relationships,the rectangular lat/lon g...Global ocean surface currents estimated from satellite derived data based on a regular global grid are affected by the grid’s shape and placement.Due to different neighbourhood relationships,the rectangular lat/lon grids lose accuracy when interpolating andfitting elevation data.Hexagonal grids have shown to be advantageous due to their isotropic,uniform neighbourhood.Considering these merits,this paper aims to estimate global ocean surface current using a global isotropic hexagonal grid from satellite remote sensing data.First,gridded satellite altimeter data and wind data with different resolutions are interpolated into the centre of the global isotropic hexagonal grid.Then,geostrophic and Ekman currents components are estimated according to the Lagerlof Ocean currents theory.Finally,the inversion results are verified.By analyzing the results,we conclude that the ocean surface currents estimated based on the global isotropic hexagonal grid have considerable accuracy,with improvement over rectangular lat/lon grids.展开更多
基金funded by the National Key Technologies R&D Program of China (Grants No. 2017YFC0505104)the Key Laboratory of Digital Mapping and Land Information Application of National Administration of Surveying, Mapping and Geoinformation of China (Grants No. DM2016SC09)
文摘At 5:39 am on June 24, 2017, a landslide occurred in the village of Xinmo in Maoxian County, Aba Tibet and Qiang Autonomous Prefecture(Sichuan Province, Southwest China). On June 25, aerial images were acquired from an unmanned aerial vehicle(UAV), and a digital elevation model(DEM) was processed. Landslide geometrical features were then analyzed. These are the front and rear edge elevation, accumulation area and horizontal sliding distance. Then, the volume and the spatial distribution of the thickness of the deposit were calculated from the difference between the DEM available before the landslide, and the UAV-derived DEM collected after the landslide. Also, the disaster was assessed using high-resolution satellite images acquired before the landslide. These include Quick Bird, Pleiades-1 and GF-2 images with spatial resolutions of 0.65 m, 0.70 m, and 0.80 m, respectively, and the aerial images acquired from the UAV after the landslide with a spatial resolution of 0.1 m. According to the analysis, the area of the landslide was 1.62 km2, and the volume of the landslide was 7.70 ± 1.46 million m3. The average thickness of the landslide accumulation was approximately 8 m. The landslide destroyed a total of 103 buildings. The area of destroyed farmlands was 2.53 ha, and the orchard area was reduced by 28.67 ha. A 2-km section of Songpinggou River was blocked and a 2.1-km section of township road No. 104 was buried. Constrained by the terrain conditions, densely populated and more economically developed areas in the upper reaches of the Minjiang River basin are mainly located in the bottom of the valleys. This is a dangerous area regarding landslide, debris flow and flash flood events Therefore, in mountainous, high-risk disaster areas, it is important to carefully select residential sites to avoid a large number of casualties.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2021R1A6A1A03044326,2017R1D1A1B06036077)。
文摘With the increasing impact of climate change,carbon emissions and removals have become major issues.Forests are major carbon pools,and forest fires are an essential part of the carbon cycle.This study introduces a model for estimating the detailed actual CO_(2)removal in burned forests using burn severity and tree survivability.Actual CO_(2)removal was estimated from empirical yield tables without using the standard carbon removal provided by the national inventory.The primary CO_(2)calculation method followed the guidelines of the International Panel on Climate Change.The burn severity was mapped using Sentinel-2 multispectral instrument data,and the survivability of each forest type was estimated according to burn severity.The survivability was applied to the pre-fire CO_(2)removal of each forest to estimate post-fire CO_(2)removal.In our case study,the burned forest area was 1,034 ha,and the CO_(2)removal before the fire was 8,615.3t/year.After the fire,removal decreased by 81.2%to 1,618.4 t/yr.In particular,the decrease in coniferous forests was high,more than 86%.The lack of survivability data on burned trees was a major limitation of our study.Systematically accumulating field monitoring data of post-fire forests will be necessary for future research and could serve as a reference for devising immediate countermeasures against forest fires.
文摘In this article, the extension to three dimensions (3D) of the blending technique that has been widely used in two dimensions (2D) to calibrate ocean chlorophyll is presented. The results thus obtained revealed a very high degree of efficiency when predicting observed values of ocean chlorophyll. The mean squared difference between the predicted and observed values of ocean chlorophyll when 3D technique was used fell far below the tolerance level which was set to the difference between satellite and observed in-situ values. The resulting blended field did not only provide better predictions of the in situ observations in areas where bottle samples cannot be obtained but also provided a smooth variation of the distribution of ocean chlorophyll throughout the year. An added advantage is its computational efficiency since data that would have been treated at least four times would be treated only once. With the advent of these results, it is believed that the modelling of the ocean life cycle will become more realistic.
文摘Global ocean surface currents estimated from satellite derived data based on a regular global grid are affected by the grid’s shape and placement.Due to different neighbourhood relationships,the rectangular lat/lon grids lose accuracy when interpolating andfitting elevation data.Hexagonal grids have shown to be advantageous due to their isotropic,uniform neighbourhood.Considering these merits,this paper aims to estimate global ocean surface current using a global isotropic hexagonal grid from satellite remote sensing data.First,gridded satellite altimeter data and wind data with different resolutions are interpolated into the centre of the global isotropic hexagonal grid.Then,geostrophic and Ekman currents components are estimated according to the Lagerlof Ocean currents theory.Finally,the inversion results are verified.By analyzing the results,we conclude that the ocean surface currents estimated based on the global isotropic hexagonal grid have considerable accuracy,with improvement over rectangular lat/lon grids.
