Study on the critical stress threshold of weakly cemented sandstone damage based on the renormalization group method

During the microstructural analysis of weakly cemented sandstone,the granule components and ductile structural parts of the sandstone are typically generalized.Considering the contact between granules in the microstructure of weakly cemented sandstone,three basic units can be determined:regular tetrahedra,regular hexahedra,and regular octahedra.Renormalization group models with granule-and pore-centered weakly cemented sandstone were established,and,according to the renormalization group transformation rule,the critical stress threshold of damage was calculated.The results show that the renormalization model using regular octahedra as the basic units has the highest critical stress threshold.The threshold obtained by iterative calculations of the granule-centered model is smaller than that obtained by the pore-centered model.The granule-centered calculation provides the lower limit(18.12%),and the pore-centered model provides the upper limit(36.36%).Within this range,the weakly cemented sandstone is in a phase-like critical state.That is,the state of granule aggregation transforms from continuous to discrete.In the relative stress range of 18.12%-36.36%,the weakly cemented sandstone exhibits an increased proportion of high-frequency signals(by 83.3%)and a decreased proportion of low-frequency signals(by 23.6%).The renormalization calculation results for weakly cemented sandstone explain the high-low frequency conversion of acoustic emission signals during loading.The research reported in this paper has important significance for elucidating the damage mechanism of weakly cemented sandstone.

SOLUTION OF THE RAYLEIGH PROBLEM FOR A POWER-LAW NON-NEWTONIAN CONDUCTING FLUID VIA GROUP METHOD

An investigation is made of the magnetic Rayleigh problem where a semi_infinite plate is given an impulsive motion and thereafter moves with constant velocity in a non_Newtonian power law fluid of infinite extent. The solution of this highly non_linear problem is obtained by means of the transformation group theoretic approach. The one_parameter group transformation reduces the number of independent variables by one and the governing partial differential equation with the boundary conditions reduce to an ordinary differential equation with the appropriate boundary conditions. Effect of the some parameters on the velocity u(y,t) has been studied and the results are plotted.

Renormalization group methods for a Mathieu equation with delayed feedback

This paper presents the application of the renormalization group （RG） methods to the delayed differential equation. By analyzing the Mathieu equation with time delay feedback, we get the amplitude and phase equations, and then obtain the approximate solutions by solving the corresponding RG equations. It shows that the approximate solutions obtained from the RG method are superior to those from the conventionally perturbation methods.

Modeling viscosity of methane,nitrogen,and hydrocarbon gas mixtures at ultra-high pressures and temperatures using group method of data handling and gene expression programming techniques

Accurate gas viscosity determination is an important issue in the oil and gas industries.Experimental approaches for gas viscosity measurement are timeconsuming,expensive and hardly possible at high pressures and high temperatures(HPHT).In this study,a number of correlations were developed to estimate gas viscosity by the use of group method of data handling(GMDH)type neural network and gene expression programming(GEP)techniques using a large data set containing more than 3000 experimental data points for methane,nitrogen,and hydrocarbon gas mixtures.It is worth mentioning that unlike many of viscosity correlations,the proposed ones in this study could compute gas viscosity at pressures ranging between 34 and 172 MPa and temperatures between 310 and 1300 K.Also,a comparison was performed between the results of these established models and the results of ten wellknown models reported in the literature.Average absolute relative errors of GMDH models were obtained 4.23%,0.64%,and 0.61%for hydrocarbon gas mixtures,methane,and nitrogen,respectively.In addition,graphical analyses indicate that the GMDH can predict gas viscosity with higher accuracy than GEP at HPHT conditions.Also,using leverage technique,valid,suspected and outlier data points were determined.Finally,trends of gas viscosity models at different conditions were evaluated.

The Homotopy Perturbation Renormalization Group Method to Solve the WKB Problem with Turn Points

In this paper,we give the homotopy perturbation renormalization group method,this is a new method for turning point problem.Using this method,the independent variables are introduced by transformation without introducing new related variables and no matching is needed.The WKB approximation method problem can be solved.

Group Method of Data Handling for Modeling Magnetorheological Dampers

This paper proposes the use of Group Method of Data Handling (GMDH) technique for modeling Magneto-Rheological (MR) dampers in the context of system identification. GMDH is a multilayer network of quadratic neurons that offers an effective solution to modeling non-linear systems. As such, we propose the use of GMDH to approximate the forward and inverse dynamic behaviors of MR dampers. We also introduce two enhanced GMDH-based solutions. Firstly, a two-tier architecture is proposed whereby an enhanced GMD model is generated by the aid of a feedback scheme. Secondly, stepwise regression is used as a feature selection method prior to GMDH modeling. The proposed enhancements to GMDH are found to offer improved prediction results in terms of reducing the root-mean-squared error by around 40%.

Group Method Analysis of MHD Mixed Convective Flow Past on a Moving Curved Surface with Suction

The group-theorytic approach is applied for solving the problem of the unsteady MHD mixed convective flow past on a moving curved surface. The application of two-parameter groups reduces the number of independent variables by two, and consequently the system of governing partial differential equations with boundary conditions reduces to a system of ordinary differential equations with appropriate boundary conditions. The obtained ordinary differential equations are solved numerically using the shooting method. The effects of varying parameters governing the problem are studied. A comparison with previous work is presented.

The Effectiveness of Group Cooperative Learning Method in Badminton Teaching in Colleges and Universities

In college badminton teaching,teachers utilize the group cooperative learning method,which not only helps to improve students’badminton skill level but also cultivates their teamwork spirit,communication skills,and self-management ability unconsciously.In view of this,this paper mainly describes the significance of applying the group cooperative learning method in college badminton teaching,analyzes the current problems in college badminton teaching,and aims to discover effective development strategies for group cooperative learning method in college badminton teaching in order to improve the effectiveness of college badminton teaching.

Predicting beach profile evolution with group method data handling-type neural networks on beaches with seawalls

A major goal of coastal engineering is to develop models for the reliable prediction of short-and longterm near shore evolution.The most successful coastal models are numerical models,which allow flexibility in the choice of initial and boundary conditions.In the present study,evolutionary algorithms(EAs)are employed for multi-objective Pareto optimum design of group method data handling(GMDH)-type neural networks that have been used for bed evolution modeling in the surf zone for reflective beaches,based on the irregular wave experiments performed at the Hydraulic Laboratory of Imperial College(London,UK).The input parameters used for such modeling are significant wave height,wave period,wave action duration,reflection coefficient,distance from shoreline and sand size.In this way,EAs with an encoding scheme are presented for evolutionary design of the generalized GMDH-type neural networks,in which the connectivity configurations in such networks are not limited to adjacent layers.Also,multi-objective EAs with a diversity preserving mechanism are used for Pareto optimization of such GMDH-type neural networks.The most important objectives of GMDH-type neural networks that are considered in this study are training error(TE),prediction error(PE),and number of neurons(N).Different pairs of these objective functions are selected for two-objective optimization processes.Therefore,optimal Pareto fronts of such models are obtained in each case,which exhibit the trade-offs between the corresponding pair of the objectives and,thus,provide different non-dominated optimal choices of GMDH-type neural network model for beach profile evolution.The results showed that the present model has been successfully used to optimally prediction of beach profile evolution on beaches with seawalls.

Singularly Perturbed Renormalization Group Method and Its Significance in Dynamical Systems Theory

In this paper,we mainly investigate three topics on the renormalization group(RG)method to singularly perturbed problems:1)We will present an explicit strategy of RG procedure to get the approximate solution up to any order.2)We will refer that the RG procedure can,in fact,be used to get the normal form of differential dynamical systems.3)We will also present the approximating center manifolds of the perturbed systems,and investigate the long time asymptotic behavior by means of RG formula.

Estimating Hansen solubility parameters of organic pigments by group contribution methods

The Hansen solubility parameters(HSP)are frequently used for solvent selection and characterization of polymers,and are directly related to the suspension behavior of pigments in solvent mixtures.The performance of currently available group contribution(GC)methods for HSP were evaluated and found to be insufficient for computer-aided product design(CAPD)of paints and coatings.A revised and,for this purpose,improved GC method is presented for estimating HSP of organic compounds,intended for organic pigments.Due to the significant limitations of GC methods,an uncertainty analysis and parameter confidence intervals are provided in order to better quantify the estimation accuracy of the proposed approach.Compared to other applicable GC methods,the prediction error is reduced significantly with average absolute errors of 0.45 MPa^(1/2),1.35 MPa^(1/2),and 1.09 MPa^(1/2) for the partial dispersion(δD),polar(δP)and hydrogen-bonding(δH)solubility parameters respectively for a database of 1106 compounds.The performance for organic pigments is comparable to the overall method performance,with higher average errors forδD and lower average errors forδP andδH.

A New Group-Contribution Method for Critical Properties

In the paper, an estimating method for critical properties in group-contribution method is presented.For eliminating the influence of adjacent group and distinguishing isomers, the new method including first-level group-contribution method and second-level group-contribution method is proposed. The new method demonstrates significant improvement in accuracy.

Functional Separable Solutions to Nonlinear Diffusion Equations by Group Foliation Method

我们与来源和传送对流术语一起考虑变量的功能的分离到非线性的散开方程：u_t =((x) D (u) u_x )_x + B (x) Q (u) ， A_x ≠ 0。到这个方程的变量的 Thefunctional 分离被使用组生叶 method.A 分类学习为承认函数的方程被执行可分离的解决方案。作为后果，产生方程的一些答案被获得。

Extended Group Foliation Method and Functional Separation of Variables to Nonlinear Wave Equations

Generalized functional separation of variables to nonlinear evolution equations is studied in terms of the extended group foliation method, which is based on the Lie point symmetry method. The approach is applied to nonlinear wave equations with variable speed and external force. A complete classification for the wave equation which admits functional separable solutions is presented. Some known results can be recovered by this approach.

Prediction of Flash Point Temperature of Organic Compounds Using a Hybrid Method of Group Contribution ＋ Neural Network ＋ Particle Swarm Optimization

The flash points of organic compounds were estimated using a hybrid method that includes a simple group contribution method (GCM) implemented in an artificial neural network (ANN) with particle swarm optimization (PSO). Different topologies of a multilayer neural network were studied and the optimum architecture was determined. Property data of 350 compounds were used for training the network. To discriminate different substances the molecular structures defined by the concept of the classical group contribution method were given as input variables. The capabilities of the network were tested with 155 substances not considered in the training step. The study shows that the proposed GCM+ANN+PSO method represent an excellent alternative for the estimation of flash points of organic compounds with acceptable accuracy (AARD = 1.8%; AAE = 6.2 K).

Generating Lie Point Symmetry Groups of （2＋1）-Dimensional Broer-Kaup Equation via a Simple Direct Method

Using the (2+1)-dimensional Broer-Kaup equation as an simple example, a new direct method is developed to find symmetry groups and symmetry algebras and then exact solutions of nonlinear mathematical physical equations.

Grouping response method for equivalent static wind loads based on a modified LRC method

Wind loading is one of the most important loads for controlling the design of large-span roof structures. Equivalent static wind loads, which can generally aim at determining a specific response, are widely used by structural designers. A method for equivalent static wind loads applicable to multi-responses is proposed in this paper. A modified load- response-correlation （LRC） method corresponding to a particular peak response is presented, and the similarity algorithm implemented for the group response is described. The main idea of the algorithm is that two responses can be put into one group if the value of one response is close to that of the other response, when the structure is subjected to equivalent static wind loads aiming at the other response. Based on the modified LRC, the grouping response method is put forward to construct equivalent static wind loading. This technique can simultaneously reproduce peak responses for some grouped responses. To verify its computational accuracy, the method is applied to an actual large-span roof structure. Calculation results show that when the similarity of responses in the same group is high, equivalent static wind loads with high accuracy and reasonable magnitude of equivalent static wind distribution can be achieved.

Precise Object Detection Using Iterative Superpixels Grouping Method

The region completeness of object detection is very crucial to video surveillance, such as the pedestrian and vehicle identifications. However, many conventional object detection approaches cannot guarantee the object region completeness because the object detection can be influenced by the illumination variations and clustering backgrounds. In order to overcome this problem, we propose the iterative superpixels grouping （ISPG） method to extract the precise object boundary and generate the object region with high completeness after the object detection. First, by extending the superpixel segmentation method, the proposed ISPG method can improve the inaccurate segmentation problem and guarantee the region completeness on the object regions. Second, the multi- resolution superpixel-based region completeness enhancement method is proposed to extract the object region with high precision and completeness. The simulation results show that the proposed method outperforms the conventional object detection methods in terms of object completeness evaluation.

Limit analysis of vertical anti-pulling screw pile group under inclined loading on 3D elastic-plastic finite element strength reduction method

Based on the functional theory, catastrophe theory, simultaneity principle and the idea of strength reduction method(SRM), the bearing capacity functional and SRM of pile group foundation were established, and the criteria of ultimate load and the concept of safety storage coefficient(CSS) were advanced. The inclined ultimate loads by the static loading test, load increment method(LIM) and SRM are compared. Theoretically, the ultimate load of piles does not change with the loading levels when it is calculated by SRM. When the one strength reduction parameter is applied in the calculation boundary, there are calculating errors because the bearing capacity action of soils happened in the finite zone. The inclined loadings are 108, 132 and 144 kN, and SSC are 1.07, 0.94 and 0.79, respectively, so the calculation values of ultimate loads are about 115.56, 124.08 and 113.76 kN, respectively. The error between calculations and observation values is less than 6%. But the error between calculations of LIM and observations is 20%. Because of the effect of inclined loading, the push-rotation phenomenon of screw pile group appears. Under this testing, the ultimate bearing capacity of piles is mostly determined by the horizontal ultimate bearing capacity, and the effect of the vertical component of inclined load should also be considered.