Comprehensive evaluation of water-inrush risk from coal floors

Lower groups of coal seams are presently being mined from water-inrush from coal floors in order to have safe production in the Yanzhou coal mining area. We need to evaluate the risk in the lower groups of coal seams in mines. Based on a systematic collection of hydrogeological data and some data from mined working faces in these lower groups, we evaluated the factors affecting water-inrush from coal floors of the area by a method of dimensionless analysis. We obtained the order of the factors affecting water-inrush from coal floors and recalculated data on depths of destroyed floors by multiple linear regression analysis and obtained new empirical formulas. We also analyzed the water-inrush coefficient of mined working faces of the lower groups of coal seams and improved the evaluation standard of the water-inrush coefficient method. Finally, we made a comprehensive evaluation of water-inrush risks from coal floors by using the water-inrush coefficient method and a fuzzy clustering method. The evaluation results provide a solid foundation for preventing and controlling the damage caused by water of an Ordovician limestone aquifer in the lower group of coal seams in the mines of Yanzhou. It provides also important guidelines for lower groups of coal seams in other coal mines.

Technical scheme and application of pressure-relief gas extraction in multi-coal seam mining region

A pressure relief gas extraction technical model of a typical mining area is proposed based on coal and gas simultaneous extraction theory. Flac3 Dwas employed to model vertical stress and displacement contour plot characteristics of non-outburst coal seam(No. 4) on top of outburst coal seam(No. 2) along strike and incline directions. Field investigations were also conducted to verify the scientific nature of the simulation. The results demonstrate that gas pressure in No. 2 coal seam dropped to approximately 0.55 MPa in the pressure relief multi-coal seam. The highest expansion rate of the coal mine reached up to 2.58%.The pressure-relief angle was 76° along the incline direction and 60° along the strike direction. As the expansion rate and pressure-relief angle increased and the gas pressure decreased, a large amount of gas flowed into the gob of No. 4 from No. 2 coal seam and was later discharged through specific gas pipes,which eliminated No. 2 outburst risks. This study resulted in positive outcomes in that gas extraction time was reduced by 13.5 days, due to pressure relief, and drilling work load was reduced by 0.1161 m/t coal. This method ensures that gas is discharged from the outburst coal seam quickly and safely,demonstrating that the proposed technical model of pressure-relief gas extraction is effective in a multi-coal seam region.

Numerical simulation and experimental research of surrounding rock deformation of floor roadway under short-distance coal seam group combined mining

According to the influence of the combination of short-distance coal seam group on mining roadway, using numerical simulation software FLAG2D to draw the abutment pressure distribution ahead the working face and the area of influence in fully-mechanized mining conditions, the variation rules of surrounding rock supporting pressure of floor roadway and the deformation rules were summarized. GYS-300 anchor dynamometer was used to measure the roadway surface displacement, and the conclusions of numerical simulation were verified.

Geological modeling of coalbed methane reservoirs in the tectonically deformed coal seam group in the Dahebian block,western Guizhou,China

The widely spread Carboniferous-Permian coal seam group in southern China has great potential for coalbed methane resources,but the extensively developed tectonically deformed coal seriously restricts its development.Taking the Dahebian block in western Guizhou as the study area,the geological model of coalbed methane reservoirs in the tectonically deformed coal seam group was established,and the spatial distribution pattern of model parameters was clarified by clustering algorithms and factor analysis.The facies model suggests that the main coal body structures in Nos.1,4,and 7 coal seams are cataclastic coal and granulated coal,whereas the No.11 coal seam is dominated by granulated coal,which has larger thicknesses and spreads more continuously.The in situ permeability of primary undeformed coal,cataclastic coal,granulated coal,and mylonitized coal reservoirs are 0.333 mD,0.931 mD,0.146 mD,and 0.099 mD,respectively,according to the production performance analysis method.The property model constructed by facies-controlled modeling reveals that Nos.1,4,and 7 coal seams have a wider high-permeability area,but the gas content is lower;the high-permeability area in the No.11 coal seam is more limited,but the gas content is higher.The results of the self-organizing map neural network and K-means clustering indicate that the geological model can be divided into 6 clusters,the model parameter characteristics of the 6 clusters are summarized by data analysis in combination with 6 factors extracted by factor analysis,and the application of data analysis results in multi-layer coalbed methane co-development is presented.This study provides ideas for the geological modeling in the tectonically deformed coal seam group and its data analysis.