This study aimed to examine the effect of L-ornithine hydrochloride ingestion on serum growth hormone secretion response after strength training in young men who did not regularly engage in high intensity exercise. Te...This study aimed to examine the effect of L-ornithine hydrochloride ingestion on serum growth hormone secretion response after strength training in young men who did not regularly engage in high intensity exercise. Ten healthy young males without workout habits (age: 22.2 +/- 1.0 yr). Subjects performed biceps curl strength training after L-ornithine hydro- chloride and placebo ingestions. They participated in both of the above conditions randomly with a week interval in between. Serum growth hormone and ornithine levels were measured before L-ornithine hydrochloride or placebo ingestions and at 30 minutes after strength training. Serum growth hormone and ornithine level were measured. A change magnitude of serum growth hormone was significantly larger in the L-ornithine hydrochloride condition than in the placebo condition, and the effect size was also large (t = 1.91, p = .044, ES = .75). A significant interaction (F = 280.98, p = 0.000, ηp2 = 0.96) was found in serum ornithine and a multiple comparison test showed that it was greater in the L-ornithine hydrochloride condition. Serum growth hormone level after strength training increases by L-ornithine hydrochloride ingestion in untrained young males.展开更多
The austenite grain growth behavior of Q1030 steel was studied under different heating conditions. The austenite grain size increases with the heating temperature and holding time increasing. Austenite grains grow in ...The austenite grain growth behavior of Q1030 steel was studied under different heating conditions. The austenite grain size increases with the heating temperature and holding time increasing. Austenite grains grow in an exponential manner with rising heating tem- perature and in a parabolic manner with prolonging holding time. A mathematical model for describing the austenite grain growth behavior of Q 1030 steel was obtained on the basis of experimental results using regression analysis. When the heating temperatures lie between 1000 and 1100℃ at a certain holding time, abnormal grain growth appears, which causes mixed grains in Q1030 steel.展开更多
The Ti-Al-Sn-Zr-Cr-Mo-V-Si （Ti-62A） alloy, an alpha-beta alloy with high strength and fracture toughness, is currently used as an advanced structural material in aerospace and non-aerospace applications. Thermo-mech...The Ti-Al-Sn-Zr-Cr-Mo-V-Si （Ti-62A） alloy, an alpha-beta alloy with high strength and fracture toughness, is currently used as an advanced structural material in aerospace and non-aerospace applications. Thermo-mechanical processes can be used to optimize the relationship between its strength and fracture toughness. A Ti-62A alloy bar can be machined through a transus β-forged plus α＋β solution treated and aged specimen with a lamellar alpha microstructure. The effects of heat treatment on the mechanical properties were discussed. Heat treatment provided a practical balance of strength, fracture toughness, and fatigue crack growth resistance. A comparison of the Ti-62A alloy with the Ti-62222S alloy under the same thermo-mechanical processing conditions showed that their properties are at the same level.展开更多
A model is proposed to correlate the crack growth rate and stress ratio containing very high cycle fatigue regime.The model is verified by the experimental data in literature.Then a formula is derived for the effect o...A model is proposed to correlate the crack growth rate and stress ratio containing very high cycle fatigue regime.The model is verified by the experimental data in literature.Then a formula is derived for the effect of mean stress on fatigue strength,and it is used to estimate the fatigue strength of a bearing steel in very high cycle fatigue regime at different stress ratios.The estimated results are also compared with those by Goodman formula.展开更多
In this paper, ultrasonic （20 kHz） fatigue tests were performed on specimens of a high-strength steel in very high cycle fatigue （VHCF） regime. Experimental results showed that for most tested specimens failed in ...In this paper, ultrasonic （20 kHz） fatigue tests were performed on specimens of a high-strength steel in very high cycle fatigue （VHCF） regime. Experimental results showed that for most tested specimens failed in a VHCF regime, a fatigue crack originated from the interior of specimen with a fish-eye pattern, which contained a fine granular area （FGA） centered by an inclusion as the crack origin. Then, a two-parameter model is proposed to predict the fatigue life of high-strength steels with fish-eye mode failure in a VHCF regime, which takes into account the inclusion size and the FGA size. The model was verified by the data of present experiments and those in the literature. Furthermore, an analytic formula was obtained for estimating the equivalent crack growth rate within the FGA. The results also indicated that the stress intensity factor range at the front of the FGA varies within a small range, which is irrespective of stress amplitude and fatigue life.展开更多
AIM: To evaluate properties of bone quantity/quality using young non-obese Type 1(T1D)-diabetic(NOD) prone and syngenic non-diabetic(NOD.scid) mice.METHODS: Quantitative bone assessment of tibia was conducted using du...AIM: To evaluate properties of bone quantity/quality using young non-obese Type 1(T1D)-diabetic(NOD) prone and syngenic non-diabetic(NOD.scid) mice.METHODS: Quantitative bone assessment of tibia was conducted using dual-energy X-ray absorptiometry(DXA) for the evaluation of body mass,bone mineral content,body fat mass and lean mass.Qualitative assessment was accomplished by three-point breakage for assessment of force to failure and micro-computed tomography for evaluation of trabecular and cortical properties of bone.In addition,fasting blood was evaluated prior to sacrifice at week eleven and fifteen to evaluate and compare glucose homeostasis between the strains of mice.RESULTS: Our findings support a perturbation in the relationship between bone quantity,quality,and subsequently,the association between structure and strength.There were no differences in DXA-assessed body composition(body fat,% fat mass and lean mass) and bone composition(bone mineral content and bone mineral density) between strains.However,relative to NOD.scid,NOD mice had lower trabecular bone volume,relative trabecular bone volume,trabecular number and trabecular total material density(P < 0.05).Conversely,NOD mice had greater cortical total mean volume(P < 0.05).General linear models analysis adjusted for body weight revealed a significant contribution of T1D to bone health as early as 5 wk.CONCLUSION: It is well-established that diabetes is a significant risk factor for increased fractures,although the underlying mechanisms are not fully understood.Investigation of bone parameters encompassing strength and structure early in the life course will facilitate the elucidation of the pathogenesis of impaired bone integrity.展开更多
Low-dimensional quantum spin systems with the Cu2+ central ion are still in the focus of experimental and theoretical research. Here is reported on growth of mm-sized single-crystals of the low-dimensional S = 1/2 spi...Low-dimensional quantum spin systems with the Cu2+ central ion are still in the focus of experimental and theoretical research. Here is reported on growth of mm-sized single-crystals of the low-dimensional S = 1/2 spin compound Cu6(Ge,Si)6O18·6H2O by a diffusion technique in aqueous solution. A route to form Si-rich crystals down to possible dioptase, the pure silicate, is discussed. Motivated by previously reported incorrect assignments of UV-VIS spectra, the assignment of dd excitations from such spectra of the hexahydrate and the fully dehydrated compound is proposed in comparison to dioptase and selected Cu(II) oxo-compounds using bond strength considerations. Non-doped cuprates as layer compounds show higher excitation energies than the title compound. However, when the antiferromagnetic interaction energy as Jz·ln(2) is taken into account for cuprates, a single linear relationship between the Dqe excitation energy and equatorial Cu(II)-O bond strength is confirmed for all compounds. A linear representation is also confirmed between 2A1g energies and a function of axial and equatorial Cu-O bond distances if auxiliary axial bonds are used for four-coordinated compounds. The quotient Dt/Ds of experimental orbital energies deviating from the general trend to smaller values indicates the existence of H2O respectively Cl−axial ligands in comparison to oxo-ligands, whereas larger Dt/Dqe values indicate missing axial bonds. The quotient of the excitation energy 2A1g by 2·2Eg-2B2g allows checking for correctness of the assignment and to distinguish between axial oxo-ligands and others like H2O or Cl−.展开更多
文摘This study aimed to examine the effect of L-ornithine hydrochloride ingestion on serum growth hormone secretion response after strength training in young men who did not regularly engage in high intensity exercise. Ten healthy young males without workout habits (age: 22.2 +/- 1.0 yr). Subjects performed biceps curl strength training after L-ornithine hydro- chloride and placebo ingestions. They participated in both of the above conditions randomly with a week interval in between. Serum growth hormone and ornithine levels were measured before L-ornithine hydrochloride or placebo ingestions and at 30 minutes after strength training. Serum growth hormone and ornithine level were measured. A change magnitude of serum growth hormone was significantly larger in the L-ornithine hydrochloride condition than in the placebo condition, and the effect size was also large (t = 1.91, p = .044, ES = .75). A significant interaction (F = 280.98, p = 0.000, ηp2 = 0.96) was found in serum ornithine and a multiple comparison test showed that it was greater in the L-ornithine hydrochloride condition. Serum growth hormone level after strength training increases by L-ornithine hydrochloride ingestion in untrained young males.
文摘The austenite grain growth behavior of Q1030 steel was studied under different heating conditions. The austenite grain size increases with the heating temperature and holding time increasing. Austenite grains grow in an exponential manner with rising heating tem- perature and in a parabolic manner with prolonging holding time. A mathematical model for describing the austenite grain growth behavior of Q 1030 steel was obtained on the basis of experimental results using regression analysis. When the heating temperatures lie between 1000 and 1100℃ at a certain holding time, abnormal grain growth appears, which causes mixed grains in Q1030 steel.
文摘The Ti-Al-Sn-Zr-Cr-Mo-V-Si （Ti-62A） alloy, an alpha-beta alloy with high strength and fracture toughness, is currently used as an advanced structural material in aerospace and non-aerospace applications. Thermo-mechanical processes can be used to optimize the relationship between its strength and fracture toughness. A Ti-62A alloy bar can be machined through a transus β-forged plus α＋β solution treated and aged specimen with a lamellar alpha microstructure. The effects of heat treatment on the mechanical properties were discussed. Heat treatment provided a practical balance of strength, fracture toughness, and fatigue crack growth resistance. A comparison of the Ti-62A alloy with the Ti-62222S alloy under the same thermo-mechanical processing conditions showed that their properties are at the same level.
基金supported by the National Natural Science Foundation of China(11172304 and 11021262)the National Basic Research Program of China (2012CB937500)
文摘A model is proposed to correlate the crack growth rate and stress ratio containing very high cycle fatigue regime.The model is verified by the experimental data in literature.Then a formula is derived for the effect of mean stress on fatigue strength,and it is used to estimate the fatigue strength of a bearing steel in very high cycle fatigue regime at different stress ratios.The estimated results are also compared with those by Goodman formula.
基金supported by the National Basic Research Program of China (Grant 2012CB937500)the National Natural Science Foundations of China (Grants 11172304 and 11202210)
文摘In this paper, ultrasonic （20 kHz） fatigue tests were performed on specimens of a high-strength steel in very high cycle fatigue （VHCF） regime. Experimental results showed that for most tested specimens failed in a VHCF regime, a fatigue crack originated from the interior of specimen with a fish-eye pattern, which contained a fine granular area （FGA） centered by an inclusion as the crack origin. Then, a two-parameter model is proposed to predict the fatigue life of high-strength steels with fish-eye mode failure in a VHCF regime, which takes into account the inclusion size and the FGA size. The model was verified by the data of present experiments and those in the literature. Furthermore, an analytic formula was obtained for estimating the equivalent crack growth rate within the FGA. The results also indicated that the stress intensity factor range at the front of the FGA varies within a small range, which is irrespective of stress amplitude and fatigue life.
基金Supported by R00DK083333(KC)T32DK007545(LJH)P60DK079626 UAB Diabetes Research Center Pilot/Feasibility Grant
文摘AIM: To evaluate properties of bone quantity/quality using young non-obese Type 1(T1D)-diabetic(NOD) prone and syngenic non-diabetic(NOD.scid) mice.METHODS: Quantitative bone assessment of tibia was conducted using dual-energy X-ray absorptiometry(DXA) for the evaluation of body mass,bone mineral content,body fat mass and lean mass.Qualitative assessment was accomplished by three-point breakage for assessment of force to failure and micro-computed tomography for evaluation of trabecular and cortical properties of bone.In addition,fasting blood was evaluated prior to sacrifice at week eleven and fifteen to evaluate and compare glucose homeostasis between the strains of mice.RESULTS: Our findings support a perturbation in the relationship between bone quantity,quality,and subsequently,the association between structure and strength.There were no differences in DXA-assessed body composition(body fat,% fat mass and lean mass) and bone composition(bone mineral content and bone mineral density) between strains.However,relative to NOD.scid,NOD mice had lower trabecular bone volume,relative trabecular bone volume,trabecular number and trabecular total material density(P < 0.05).Conversely,NOD mice had greater cortical total mean volume(P < 0.05).General linear models analysis adjusted for body weight revealed a significant contribution of T1D to bone health as early as 5 wk.CONCLUSION: It is well-established that diabetes is a significant risk factor for increased fractures,although the underlying mechanisms are not fully understood.Investigation of bone parameters encompassing strength and structure early in the life course will facilitate the elucidation of the pathogenesis of impaired bone integrity.
文摘Low-dimensional quantum spin systems with the Cu2+ central ion are still in the focus of experimental and theoretical research. Here is reported on growth of mm-sized single-crystals of the low-dimensional S = 1/2 spin compound Cu6(Ge,Si)6O18·6H2O by a diffusion technique in aqueous solution. A route to form Si-rich crystals down to possible dioptase, the pure silicate, is discussed. Motivated by previously reported incorrect assignments of UV-VIS spectra, the assignment of dd excitations from such spectra of the hexahydrate and the fully dehydrated compound is proposed in comparison to dioptase and selected Cu(II) oxo-compounds using bond strength considerations. Non-doped cuprates as layer compounds show higher excitation energies than the title compound. However, when the antiferromagnetic interaction energy as Jz·ln(2) is taken into account for cuprates, a single linear relationship between the Dqe excitation energy and equatorial Cu(II)-O bond strength is confirmed for all compounds. A linear representation is also confirmed between 2A1g energies and a function of axial and equatorial Cu-O bond distances if auxiliary axial bonds are used for four-coordinated compounds. The quotient Dt/Ds of experimental orbital energies deviating from the general trend to smaller values indicates the existence of H2O respectively Cl−axial ligands in comparison to oxo-ligands, whereas larger Dt/Dqe values indicate missing axial bonds. The quotient of the excitation energy 2A1g by 2·2Eg-2B2g allows checking for correctness of the assignment and to distinguish between axial oxo-ligands and others like H2O or Cl−.
