In order to decrease the impact on shooting accuracy caused by human factors in the machine gun type approval testing,a new type testing gun mount system was developed to replace gunner to conduct the automatic shooti...In order to decrease the impact on shooting accuracy caused by human factors in the machine gun type approval testing,a new type testing gun mount system was developed to replace gunner to conduct the automatic shooting.The finite element model was first established and then the natural characteristics of the system were obtained by calculation.On basis of calculation results,the modal testing system was set up and the experimental points,including the exciting points and the measure points were determined.Finally,modal experiment of the system was carried out and the experimental modal parameters were obtained.The simulation and experiment results indicate that the dynamic characteristics of the system have a rational matching with the shooting frequency and the finite element model were well demonstrated.The study provides a new way for shooting accuracy test in type approval testing of firearms and possesses reference value for dynamic modification and optimization design.展开更多
This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gun...This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gunpowder ignition and plasma jet ignition methods were used,and differences in the ignition time were analysed.The influence of the ignition method on the dynamic vivacity is discussed.It is shown that this influence is significant in the first phase of the combustion process,and with respect to the low values of the loading density.In the second phase of the combustion process,and for large values of the loading density,the dynamic vivacity plots for the two ignition methods converge.Regarding the burning law,close values of the exponent were obtained for the two ignition methods.The dynamic vivacity plots determined for plasma ignition reveal stronger dependence on the loading density than those determined for gunpowder ignition.The conclusion is that plasma ignition is not a solution to the problems inherent to the process of determining the ballistic properties of propellants,which results in deviation of the burning process from the geometric burning law.展开更多
The magnetic flux leakage (MFL) method is commonly used in the nondestructive evaluation (NDE) of gun barrels. The key point of MFL testing is to estimate the crack geometry parameters based on the measured signal. Th...The magnetic flux leakage (MFL) method is commonly used in the nondestructive evaluation (NDE) of gun barrels. The key point of MFL testing is to estimate the crack geometry parameters based on the measured signal. The analysis of magnetic leakage fields can be obtained by solving Maxwell’s equations using finite element method (FEM). The radial component of magnetic flux density is measured in MFL testing. The peak-peak value, the separation distance between positive and negative peaks of signal and the lift-off value of Hall-sensor are used as the main features of every sample. This paper establishes the multi-regression equations related to the width (the depth) of crack and the main characteristic values. The regression model is tested by use of the magnetic leakage data. The experimental results indicate that the regression equations can accurately predict the 2-D defect geometry parameters and the MFL quantitative testing can be achieved.展开更多
This paper describes the resisting ability of gunning material for blast furnace to carbon monoxide corrosion under the mixed gas condition through inletting hydrogen into pure CO . A standard for testing ike resistin...This paper describes the resisting ability of gunning material for blast furnace to carbon monoxide corrosion under the mixed gas condition through inletting hydrogen into pure CO . A standard for testing ike resisting ability of refractory to CO corrosion with mixed gas instead of pure CO has also been discussed. The results show : the addition of hydrogen accelerates the CO corrosion on gunning material ; the same results has been reached with the CO , 200 hours and CO 95 % + H2 5 % , 24 hours. It is reasonable to use CO 95% + H25% , 24 hours instead of pure CO, 200 hours to lest the resisting ability of refractory to carbon monoxide corrosion.展开更多
Compressed air is an integral utility part of industrial utility systems. Any improvement in compressed air system will lead to reduction in utility cost. The effectiveness of utilization side of compressed air is usu...Compressed air is an integral utility part of industrial utility systems. Any improvement in compressed air system will lead to reduction in utility cost. The effectiveness of utilization side of compressed air is usually dependent upon operator’s discretion. There are no performance testing methods available for testing existing end use equipments. A test apparatus for estimation of compressed air flow based on measurement of pressure reduction in a fixed volume cylinder in a given time is developed. The test apparatus is easy to build and simple to operate in an industrial environment. This can be used for measuring performance of any pneumatic end-use equipment and for benchmarking the performance. The test apparatus was used in a foundry for quantifying the performance of the old and new blow guns.展开更多
文摘In order to decrease the impact on shooting accuracy caused by human factors in the machine gun type approval testing,a new type testing gun mount system was developed to replace gunner to conduct the automatic shooting.The finite element model was first established and then the natural characteristics of the system were obtained by calculation.On basis of calculation results,the modal testing system was set up and the experimental points,including the exciting points and the measure points were determined.Finally,modal experiment of the system was carried out and the experimental modal parameters were obtained.The simulation and experiment results indicate that the dynamic characteristics of the system have a rational matching with the shooting frequency and the finite element model were well demonstrated.The study provides a new way for shooting accuracy test in type approval testing of firearms and possesses reference value for dynamic modification and optimization design.
基金supported by the National Research Centre,Poland [grant number DOB-BIO8/05/01/2016]the Ministry of Defence of Poland [grant number GBMON/13-988/2018/WAT]
文摘This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gunpowder ignition and plasma jet ignition methods were used,and differences in the ignition time were analysed.The influence of the ignition method on the dynamic vivacity is discussed.It is shown that this influence is significant in the first phase of the combustion process,and with respect to the low values of the loading density.In the second phase of the combustion process,and for large values of the loading density,the dynamic vivacity plots for the two ignition methods converge.Regarding the burning law,close values of the exponent were obtained for the two ignition methods.The dynamic vivacity plots determined for plasma ignition reveal stronger dependence on the loading density than those determined for gunpowder ignition.The conclusion is that plasma ignition is not a solution to the problems inherent to the process of determining the ballistic properties of propellants,which results in deviation of the burning process from the geometric burning law.
基金National Nature Science Found of China(50175109)Science Fund of Ordnance Engineering College in China
文摘The magnetic flux leakage (MFL) method is commonly used in the nondestructive evaluation (NDE) of gun barrels. The key point of MFL testing is to estimate the crack geometry parameters based on the measured signal. The analysis of magnetic leakage fields can be obtained by solving Maxwell’s equations using finite element method (FEM). The radial component of magnetic flux density is measured in MFL testing. The peak-peak value, the separation distance between positive and negative peaks of signal and the lift-off value of Hall-sensor are used as the main features of every sample. This paper establishes the multi-regression equations related to the width (the depth) of crack and the main characteristic values. The regression model is tested by use of the magnetic leakage data. The experimental results indicate that the regression equations can accurately predict the 2-D defect geometry parameters and the MFL quantitative testing can be achieved.
文摘This paper describes the resisting ability of gunning material for blast furnace to carbon monoxide corrosion under the mixed gas condition through inletting hydrogen into pure CO . A standard for testing ike resisting ability of refractory to CO corrosion with mixed gas instead of pure CO has also been discussed. The results show : the addition of hydrogen accelerates the CO corrosion on gunning material ; the same results has been reached with the CO , 200 hours and CO 95 % + H2 5 % , 24 hours. It is reasonable to use CO 95% + H25% , 24 hours instead of pure CO, 200 hours to lest the resisting ability of refractory to carbon monoxide corrosion.
文摘Compressed air is an integral utility part of industrial utility systems. Any improvement in compressed air system will lead to reduction in utility cost. The effectiveness of utilization side of compressed air is usually dependent upon operator’s discretion. There are no performance testing methods available for testing existing end use equipments. A test apparatus for estimation of compressed air flow based on measurement of pressure reduction in a fixed volume cylinder in a given time is developed. The test apparatus is easy to build and simple to operate in an industrial environment. This can be used for measuring performance of any pneumatic end-use equipment and for benchmarking the performance. The test apparatus was used in a foundry for quantifying the performance of the old and new blow guns.
