Non-destructive Measurement of Magnetic Properties of Claw Pole

The magnetic properties of the claw pole have a direct effect on the output power of a generator Many methods can be used to measure these magnetic properties,each with its own advantages,but an important shortcoming is that all are destructive.In this study,a new non-destructive method to measure the magnetic properties of claw pole was proposed and a corresponding testing set-up was designed.A finite-element model was constructed to simulate the measurement process.Results proved that the measured magnetization-like curves had good agreement with the trend of the input magnetic curves and the effect of the positioning error in the measuring process could be neglected.To further validate the new method,seven types of claw poles of different materials subjected to different heat-treatment processes were forged and tested by both the new method and the conventional ring-sample method.Compared with the latter,the new method showed better consistency,relatively higher accuracy,and much stronger stability of measurement results;however,its sensitivity needs to be improved.The effects of material compositions and heat-treatment parameters on the magnetic properties of the claw pole were briefly analyzed.

Influence of Gas Hydrate on the Acoustic Properties of Sediment: A Comprehensive Review with a Focus on Experimental Measurements

In recent years, natural gas hydrate has attracted increasing attention worldwide as a potential alternative energy source due to its attributes of wide distribution, large reserves, and low carbon. Since the acoustic characteristics of hydratebearing reservoirs clearly differ from those of adjacent formations, an acoustic approach, using seismic and acoustic logging, is one of the most direct, effective and widely used methods among the identification and characterization techniques for hydrate reservoir exploration. This review of research on the influence of hydrate(content and distribution) on the acoustic properties(velocity and attenuation) of sediments in the past two decades includes experimental studies based on different hydrate formation methods and measurements, as well as rock physics models. The main problems in current research are also pointed out and future prospects discussed.

Measurement on Physicochemical Properties ofNaCl-KCl-ScCl_3 System for Manufacture of Al-Sc Alloy by Molten Salt Electrolysis

The physicochemical properties of the system, such as density, surface tension, specific conductance and melting point were measured. The results were discussed.

ESTIMATING STRUCTURAL INERTIA PROPERTIES FROM VIBRATION MEASUREMENTS

ＥＳＴＩＭＡＴＩＮＧＳＴＲＵＣＴＵＲＡＬＩＮＥＲＴＩＡＰＲＯＰＥＲＴＩＥＳＦＲＯＭＶＩＢＲＡＴＩＯＮＭＥＡＳＵＲＥＭＥＮＴＳＥＳＴＩＭＡＴＩＮＧＳＴＲＵＣＴＵＲＡＬＩＮＥＲＴＩＡＰＲＯＰＥＲＴＩＥＳＦＲＯＭＶＩＢＲＡＴＩＯＮＭＥＡＳＵＲＥＭＥＮＴＳ￥...

Measurements of the Thermophysical Properties of the API 5L X80

The thermophysical properties of API 5L X80 steel were experimentally measured, in order to use these in computational models to determine the temperature field in welded joints. In this work, values of thermal expansion coefficient, specific heat, thermal diffusivity and thermal conductivity were experimentally obtained as a function of temperature. The thermal expansion coefficient was determined at temperatures of 20°C to 1200°C in a dilatometer DIL 402 PC. The specific heat was determined on a differential scanning calorimeter at temperatures between 300°C and 1200°C. The diffusivity and thermal conductivity were determined in the temperature range 100°C to 800°C in a 457 LFA diffusivimeter using laser flash technique. The thermal expansion coefficient remained approximately with constant value of 8.5 × 10-6 K-1 and suffered two falls reaching values -25 × 10-6 K-1 and -50 × 10-6 K-1 in the stages of heating and cooling respectively. It was observed for this material, minimum and maximum values of specific heat equal to 0.571 J/gK and 1.084 J/gK at temperatures of 300°C and 720°C, respectively. The behavior of thermal diffusivity and thermal conductivity in the temperature range 100°C to 800°C tends to decrease with increasing temperature. Based on the measured properties, computational modeling of the temperature field can be numerically obtained with better accuracy.

MEASUREMENT OF THE DIELECTRIC PROPERTIES OF BIOLOGICAL TISSUE

An open-ended coaxial line reflection method especially suitable for meas-uring the dielectric properties of biological tissue in vivo is described.This method offersthe advantage of not requiring any special preparation of the samples to be measured but aclose contact with the open end of a coaxial line.It is,therefore,very convenient to acquirea large number of measurement data in broad band rapidly.The method may also be usedto measure the properties of other substances.The measuring system consists of a networkanalyzer controlled by a microcomputer and calibrated by using ANA procedure to elimi-hate the influnce of error network introduced by the adapter,some connectors,etc.In or-der to reach higher accuracy,the iterative method is used to determine the parameters ofthe equivalent circuit.Measurements of permeativities of some living tissues have been per-formed in the frequency band of 0.5-2GHz.Compared with the results known in somepapers,the validity of this method has been confirmed.The difference in dielectric proper-ties between living and dead tissues,and the tissue permeativites(ε)versus frequency andduration of measurement after death have also been measured.

MICROCOMPUTERIZED MEASUREMENT AND ANALYSIS OF ELECTRON EMISSION PROPERTIES OF THERMIONIC CATHODES

A microcomputerized measurement system is developed.This system automatically acquiresan I-V characteristic curve in 5 seconds with the accuracy of 0.05％ FSR(full scale range).The Schottkyextrapolation field-free emission,the inflection-point emission,the flection-point emission,the average effec-tive work function.the Richardson work function,the work function distribution at the operation tempera-ture and other important information that reflects properties of cathodes are obtained by this system.The re-sults of analysing four types of cathodes demonstrate that this system is very suitable for measuring the activi-ty changes of the cathode in the processes of activation,ageing,poisoning and life test.It is proved that thissystem can also be used to monitor the actlvity of the cathode in the assembled tube by measuring a gridcontrolled travelling-wave tube.

Integrated On-line Instrumentation System of Magnetic Properties Measurement

A portable microcomputer-controlled inspection system has been developed for detection of magnetic properties of soft magnetic materials. It incorporates custom designed software for control of the magnetic field during operation such as demagnetization, field sweeping, and for data logging and analysis. Results are recorded using a 12-bit analog to digital converter and are then stored on disk. The magnetic hysteresis loop and Barkhausen noise data can be converted into important magnetic parameters: coecivity, remanence, and hysteresis loss, Barkhausen amplitude, and Barkhausen noise energy. This system incorporated with the magnetostriction, and magnetoacoustic emission, is then related with the nondestructive detection of material degradation.

Proposal and Verification of Simultaneous Measurement Method for Three Thermoelectric Properties with Film-Type Thermocouple Probe

A new simultaneous measurement method for the measurement of the three thermoelectric properties with a film-type thermocouple probe was proposed. Seebeck coefficient was measured using the steady-state condi-tion of the differential method. The electrical resistivity was measured us-ing the four-probe method and the thermal diffusivity is measured using the periodic heating method. The effectiveness of the proposed method was verified using constantan as a reference material. After describing the effectiveness of the method, the measurement of three thermoelectric properties of Bi0.3Sb1.7Te3, which is a thermoelectric material, was per-formed.

Evaluation of the Translation,Cross-cultural Adaptation and Properties of Measurement of the FACT-BMT Questionnaire

Various questionnaires have been described which evaluate the quality of life in patients undergoing cancer treatment,but most were originally developed in English and have not been adequately validated for other languages.To evaluate the process of translation and cross-cultural adaptation and the measurement properties of the Functional Assessment of Cancer Therapy-Bone Marrow Transplantation(FACT-BMT)questionnaire,a systematic review was conducted with two independent evaluators.The search for articles was carried out in four databases:MEDLINE,EMBASE,CINAHL and SCIELO,using the terms“questionnaire”,“quality of life”,“oncology”,and“valid”and their descriptors according to MeSH and DeCs.The searches yielded 6,877 studies,of which only three performed the stages of translation,cross-cultural adaptation,and evaluation of the measurement properties of the FACT-BMT questionnaire.The instruments in Arabic,Chinese,Korean and Portuguese showed and presented good methodological quality,but none of the four studies followed all the validation criteria for the questionnaire.The adapted versions of the FACT-BMT have methodological weaknesses in their process of translation and cross-cultural adaptation and evaluation of measurement properties,therefore the questionnaires possibly being used inadequately in other languages.

Evaluation of myocardial viability during cold storage by measurement of myocardual dielectric properties tanδm in radio frequency

Objective To study the mechanism of myocardial dielectric property changes in radio frequency during hypothermic preservation and explore myocardial viability evaluative method. Methods Hybrid young pigs ( 20 - 30 kg) were used in the experiment. Heart arrest was in-

The study of measuring technology on the dynamic mechanical properties of welded joint with high strainrate

In this paper, to meet the needs of studying work of dynamic mechanical properties of welded joint, the dynamic mechanical properties of welded joint were measured by means of SHPB(Split Hopkinson Pressure Bar).The dynamic mechanical property's curves of every part of welded joint were obtained. For studying the dynamic behavior of mechanical heterogeneity of welded joint, important data were offered. The method of test creates a new way of studying dynamic mechanical properties of welded joint.

Effect of Particle Phase Volume, Shape and Liquid Phase Concentrations on Rheological Properties of Large Particulate-Liquid Model Food Systems by Using Ball Measuring System

Rheological properties of large particulate-liquid model food systems were studied by using the BMS （ball measuring system）. The model food systems were composed of alginate gel particles （-10mm） and a gelatinised starch solution with 1% w/w sodium chloride as a liquid phase. The effects of particle phase volume （Ф, 0-0.60）, particle shapes （cube, sphere, rod and disc） and starch concentrations （3% and 5% w/w starch） were investigated. The power law model was successfully applied to characterize the flow properties of each system and the consistency K and power law index n were obtained. The K increased and n decreased with increasing # for samples at all particle shapes at 3% w/w starch in the liquid phase. The particle effect on the viscosity is further analysed by means of the Krieger-Dougherty model and the maximum packing fraction #,, and the intrinsic viscosity [η] were obtained in each system. The Фm, depended on the particle shape, as expected. The [7] value depended on particle shape and was largely in the order of 4.04 （cube）, 3.28 （disc）, 2.56 （sphere） and 2.32 （rod） at 3% w/w starch. The [η] also depended on starch concentration and was 1.1 at 5%,6 w/w starch in the liquid phase with spherical particles. The present results show successful application of BMS to study the rheological properties of large particulate liquid food systems at relatively small scale experiment （-0.5 L） and also that existing models for suspension rheology are applicable for such food systems to a great extend.

基于Visual C++.Net的Measurement Studio软件设计

针对虚拟设备软件开发的复杂性和大量而繁琐的程序编码,运用Measurement Studio中的MFC和ActiveX技术,为.Net增加了一组可控制的Measurement Studio用户控件,实现了虚拟设备人机交互界面的虚拟设备软件的易用性。实验证明,与传统的方法相比,该方法节约了开发成本,节省了开发时间。

Retrieval of Aerosol Optical Properties over a Vegetation Surface Using Multi-angular, Multi-spectral, and Polarized Data

An algorithm to retrieve aerosol optical properties using multi-angular,multi-spectral,and polarized data without a priori knowledge of the land surface was developed.In the algorithm,the surface polarized reflectance was estimated by eliminating the atmospheric scattering from measured polarized reflectance at 1640 nm.A lookup table （LUT） and an iterative method were adopted in the algorithm to retrieve the aerosol optical thickness （AOT,at 665 nm） and the （A）ngstr（o）m exponent （computed between the AOTs at 665 and 865 nm）.Experiments were performed in Tianjin to verify the algorithm.Data were provided by a newly developed airborne instrument,the Advanced Atmosphere Multi-angle Polarization Radiometer （AMPR）.The AMPR measurements over the target field agreed well with the nearby ground-based sun photometer.An algorithm based on Research Scanning Polarimeter （RSP） measurements was introduced to validate the observational measurements along a flight path over Tianjin.The retrievals were consistent between the two algorithms.The AMPR algorithm shows potential in retrieving aerosol optical properties over a vegetation surface.

Nonclasssical Properties in Two-Mode Fields Resonantly Interacting with a Three-Level -Type Atom

Some noclassical properties in electromagnetic field are investigated for the interaction of two-modes initially taken in coherent-state representation with the three-level -type atom, such as squeezing properties and violation of the Cauchy-Schwartz inequality. The enhancement of field squeezing is found by selective atomic measurement. The Cauchy-Schwartz inequality is violated by the application of the classical field followed by detection in excited state.

Self-contained in situ sediment acoustic measurement system based on hydraulic driving penetration

A novel self-contained in situ sediment acoustic measurement system based on hydraulic driving penetration is proposed to solve the problem of large disturbances to sediments of the in situ equipments already in existence. By using a hydraulic driving device, the system drives four acoustic probes into sediments at an even speed, and this decreases disturbances to sediments introduced by the penetration of acoustic probes. By means of the special design of the central control unit, the system can work full-automatically and the data are stored self-containedly, and this avoids the requirement of real-time remote controlling from the ship. Its operating water depth, measuring depth and measuring frequency is 500m, 1.0m and 30kHz respectively. A set of in situ sound speeds and attenuation coefficients of sediments are obtained at 40 stations using the system. The results confirm that the data obtained by the in situ sediment acoustic system are accurate and credible.

Sub-bandgap photocurrent response and carrier transport properties of undoped semi-insulating LEG GaAs as a composite

Undoped (ND) semi-insulating (SI) liquid encapsulated Czochralski (LEC) GaAscrystals were investigated by photocurrent and temperature-dependent Hall measurements. It isindicated that strong nonuniformities in the distributions of impurities and defects can occur forthe NDSILEC GaAs crystal grown under a condition with strong constitutional supercooling. In suchcase, the deep level that dominates Fermi level is spacial location dependent, and the GaAs crystalbecomes a composite consisting of a large number of elementary domains with differentconductivities. The sub-bandgap photocurrent response and the carrier transport properties for thiskind of composite are quite different from those for homogeneous NDSILEC GaAs.

Electromotive force measurements in liquid Ag-In-Pd lead-free alloys

Emf technique was employed to determine indium activities in the liquid Ag-In-Pd alloys using galvanic cells with yttria-stabilised-zirconia as solid electrolyte according to the scheme： kanthal/rhenium, Ag-In-Pd, In2O3 ｜ YSZ ｜ Ni, NiO, Pt. Composition and temperature measurement ranges were limited, because of very steep liquidus surface; 35 compositions for Xpd up to 0.3 were investigated and at temperatures from near-liquidus up to 1700 K. High temperature experiments required special moly furnace to be constructed with unique automatic gas supply system for fumace winding protective atmosphere. Emf readings were taken and recorded by automatic data acquisition system. Linear dependence of emf on temperature was observed for all compositions investigated, and results were approximated by straight line equa- tions. Then In activities were calculated using well-known relations and taking into account correction for thermoelectric power between kanthal and platinum. Results are to be used along with other existing data to perform assessment of the ternary system under accord.

Enhancing magnetic properties of anisotropic NdDyFeCoNbCuB powder by applying magnetic field at high temperature during hydrogen desorption

Anisotropic powder was prepared with precursor （NdDy）-（FeCoNbCu）-B sintered magnets by hydrogen decrepitation, desorption, and subsequent annealing treatment. The hydrogen desorption was performed in magnetic fields of 0, 1, 3, and 5 T. The orientation of tetragonal phase grains of the powder was evaluated from the hysteresis loops measured by extraction magnetometer. Residual hydrogen content of the powder was evaluated by thermal-magnetic analysis. The powder with Hcj, Br, and （BH）max of 1138 kA.m^-1, 1.029 T, and 172.5 kJ.m^-3, respectively, was achieved under the condition of the magnetic field of 3 T. Magnetic properties of the powder, especially, the remanence of the powder, are enhanced upon magnetic fields, which is due to better orientation of powder particles and less residual hydrogen in the powder resulted from the magnetic field during the hydrogen desorption process.