The shear components of strain tensors for matrix and twin crystal of winned martensite were roughly opposite after calculation,and the strain energy would be reduced.The growth of martensitic plates along the normal ...The shear components of strain tensors for matrix and twin crystal of winned martensite were roughly opposite after calculation,and the strain energy would be reduced.The growth of martensitic plates along the normal direction of the twin plane may depend upon the effect of self-accommodation between the matrix and twin crystals.Based upon the analysis on the displacement vectors of the normals for different habit planes,the{10,3,15}_f plane could form the macroscopic invariant habit plane;but the(55)_f,(22)_f,and(11)_f planes are difficult to become the invariant planes.展开更多
For media with inclusions(e.g.,precipitates,voids,reinforcements,and others),the difference in lattice parameter and the elastic modulus between the matrix and inclusions cause stress concentration at the interfaces.T...For media with inclusions(e.g.,precipitates,voids,reinforcements,and others),the difference in lattice parameter and the elastic modulus between the matrix and inclusions cause stress concentration at the interfaces.These stress fields depend on the inclusions’size,shape,and distribution and will respond instantly to the evolving microstructure.This study develops a phase-field model concerningmodulus heterogeneity.The effect of modulus heterogeneity on the growth process and equilibrium state of theαplate in Ti-6Al-4V during precipitation is evaluated.Theαprecipitate exhibits strong anisotropy in shape upon cooling due to the interplay of the elastic strain and interfacial energy.The calculated orientation of the habit plane using the homogeneous modulus ofαphase shows the smallest deviation fromthat of the habit plane observed in the experiment,compared to the case where the homogeneous modulus ofβphase is adopted.In addition,the equilibrium volume ofαphase within the systemusing homogeneousβmodulus exhibits the largest dependency on the applied stresses.The stress fields across theα/βinterface are further calculated under the assumption of modulus heterogeneity and compared to those using homogeneous modulus of eitherαorβphase.This study provides an essential theoretical basis for developing mechanics models concerning systems with heterogeneous structures.展开更多
Precipitation habits plays a decisive role in strengthening materials,especially for Mg alloys the non-basal plane precipitation is necessary but very limited.Generally,the precipitates would nucleate and grow up in a...Precipitation habits plays a decisive role in strengthening materials,especially for Mg alloys the non-basal plane precipitation is necessary but very limited.Generally,the precipitates would nucleate and grow up in a specific habit plane owing to the constraint of free-energy minimization of the system.Herein,in an aged ultralight Mg-Li-Zn alloy,we confirmed that the precipitates dominated by C15 Laves structure could form in a variety of habit planes,to generate three forms of strengthening-phases,i.e.,precipitate-rod,precipitate-lath,and precipitate-plate.Among which,the precipitate-plates are on basal plane as usually but precipitate-rods/laths are on non-basal plane,and such non-basal precipitates would transform into the basal(Mg,Li)Zn_(2)Laves structure with prolonged aging.These findings are interesting to understand the precipitation behaviors of multi-domain Laves structures in hexagonal close-packed crystals,and expected to provide a guidance for designing ultralight high-strength Mg-Li based alloys via precipitation hardening on the non-basal planes.展开更多
Morphology and crystal structure of β precipitate phase in Mg-7Gd-5Y-1Nd-0.5Zr (mass fraction, %) alloy were characterized by optical microscopy, scanning electron microscopy and transmission electron microscopy. Com...Morphology and crystal structure of β precipitate phase in Mg-7Gd-5Y-1Nd-0.5Zr (mass fraction, %) alloy were characterized by optical microscopy, scanning electron microscopy and transmission electron microscopy. Compositions were determined for β phase using thin foil energy dispersive spectroscopy. Precipitation at 400 ℃ involves formation of platelet and block-shaped β phase. The orientation relationship is and between β precipitate phase and α-Mg matrix with habit planes parallel to , and a composition of Mg5(Y0.4Gd0.4Nd0.2) is suggested for the β phase in Mg-7Gd-5Y-1Nd-0.5Zr alloy.展开更多
利用3D EBSD-FIB(three dimensional electron backscatter diffraction-focused ion beam)技术,以高锰钢为实验材料,构建晶粒三维立体形貌,并对马氏体惯习面进行观察分析。结果表明:热致板条状马氏体表面平直,接近马氏体的{110}α,惯...利用3D EBSD-FIB(three dimensional electron backscatter diffraction-focused ion beam)技术,以高锰钢为实验材料,构建晶粒三维立体形貌,并对马氏体惯习面进行观察分析。结果表明:热致板条状马氏体表面平直,接近马氏体的{110}α,惯习面平行于奥氏体的{225}γ,其初始形核及后期生长均在{225}γ上进行;而形变诱发形成的板条状马氏体表面和惯习面分布近于{021}α和{225}γ,初始形核和前期生长沿{225}γ,后期生长沿{111}γ,由于外加应力,其表面发生弯曲变形,形核时间不同,偏离{225}γ-{111}γ程度不同。展开更多
The α alloy Ti-2Al-2.5Zr and near α alloy Ti-4Al-2V were hydrogenated to various levels. The morphology, orientation relation （OR）, and habit plane of the hydrides were studied by means of transmission electron mi...The α alloy Ti-2Al-2.5Zr and near α alloy Ti-4Al-2V were hydrogenated to various levels. The morphology, orientation relation （OR）, and habit plane of the hydrides were studied by means of transmission electron microscopy （TEM）. It was found that in the two alloys most of the precipitates are δ-hydrides which have fcc structure with the lattice parameter a = 0.44 nm. Two basic orientation relationships and habit planes of the precipitates are determined. Twin structure was observed in both alloys.展开更多
文摘The shear components of strain tensors for matrix and twin crystal of winned martensite were roughly opposite after calculation,and the strain energy would be reduced.The growth of martensitic plates along the normal direction of the twin plane may depend upon the effect of self-accommodation between the matrix and twin crystals.Based upon the analysis on the displacement vectors of the normals for different habit planes,the{10,3,15}_f plane could form the macroscopic invariant habit plane;but the(55)_f,(22)_f,and(11)_f planes are difficult to become the invariant planes.
基金the financial support from the National Key Research and Development Program of China under Grant No.2022YFB3707803the Key Research Project of Zhejiang Laboratory under Grant No.2021PE0AC02+2 种基金the National Natural Science Foundation of China under Grant No.U2230102RS acknowledges the open research fund of Songshan Lake Materials Laboratory(2021SLABFK06)Guangdong Basic and Applied Basic Research Foundation(2024A1515011873).
文摘For media with inclusions(e.g.,precipitates,voids,reinforcements,and others),the difference in lattice parameter and the elastic modulus between the matrix and inclusions cause stress concentration at the interfaces.These stress fields depend on the inclusions’size,shape,and distribution and will respond instantly to the evolving microstructure.This study develops a phase-field model concerningmodulus heterogeneity.The effect of modulus heterogeneity on the growth process and equilibrium state of theαplate in Ti-6Al-4V during precipitation is evaluated.Theαprecipitate exhibits strong anisotropy in shape upon cooling due to the interplay of the elastic strain and interfacial energy.The calculated orientation of the habit plane using the homogeneous modulus ofαphase shows the smallest deviation fromthat of the habit plane observed in the experiment,compared to the case where the homogeneous modulus ofβphase is adopted.In addition,the equilibrium volume ofαphase within the systemusing homogeneousβmodulus exhibits the largest dependency on the applied stresses.The stress fields across theα/βinterface are further calculated under the assumption of modulus heterogeneity and compared to those using homogeneous modulus of eitherαorβphase.This study provides an essential theoretical basis for developing mechanics models concerning systems with heterogeneous structures.
基金the National Natural Science Foundation of China(Grant No.51525101,No.51971053,No.52101129)the Project of Promoting Talents in Liaoning Province(No.XLYC1808038)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.N2002018)the Project funded by China Postdoctoral Science Foundation(2020M670774)。
文摘Precipitation habits plays a decisive role in strengthening materials,especially for Mg alloys the non-basal plane precipitation is necessary but very limited.Generally,the precipitates would nucleate and grow up in a specific habit plane owing to the constraint of free-energy minimization of the system.Herein,in an aged ultralight Mg-Li-Zn alloy,we confirmed that the precipitates dominated by C15 Laves structure could form in a variety of habit planes,to generate three forms of strengthening-phases,i.e.,precipitate-rod,precipitate-lath,and precipitate-plate.Among which,the precipitate-plates are on basal plane as usually but precipitate-rods/laths are on non-basal plane,and such non-basal precipitates would transform into the basal(Mg,Li)Zn_(2)Laves structure with prolonged aging.These findings are interesting to understand the precipitation behaviors of multi-domain Laves structures in hexagonal close-packed crystals,and expected to provide a guidance for designing ultralight high-strength Mg-Li based alloys via precipitation hardening on the non-basal planes.
基金Project (2011DAE22B01) supported by the Key Technologies Program of China during the 12th Fire-Year Plan Period
文摘Morphology and crystal structure of β precipitate phase in Mg-7Gd-5Y-1Nd-0.5Zr (mass fraction, %) alloy were characterized by optical microscopy, scanning electron microscopy and transmission electron microscopy. Compositions were determined for β phase using thin foil energy dispersive spectroscopy. Precipitation at 400 ℃ involves formation of platelet and block-shaped β phase. The orientation relationship is and between β precipitate phase and α-Mg matrix with habit planes parallel to , and a composition of Mg5(Y0.4Gd0.4Nd0.2) is suggested for the β phase in Mg-7Gd-5Y-1Nd-0.5Zr alloy.
文摘利用3D EBSD-FIB(three dimensional electron backscatter diffraction-focused ion beam)技术,以高锰钢为实验材料,构建晶粒三维立体形貌,并对马氏体惯习面进行观察分析。结果表明:热致板条状马氏体表面平直,接近马氏体的{110}α,惯习面平行于奥氏体的{225}γ,其初始形核及后期生长均在{225}γ上进行;而形变诱发形成的板条状马氏体表面和惯习面分布近于{021}α和{225}γ,初始形核和前期生长沿{225}γ,后期生长沿{111}γ,由于外加应力,其表面发生弯曲变形,形核时间不同,偏离{225}γ-{111}γ程度不同。
文摘The α alloy Ti-2Al-2.5Zr and near α alloy Ti-4Al-2V were hydrogenated to various levels. The morphology, orientation relation （OR）, and habit plane of the hydrides were studied by means of transmission electron microscopy （TEM）. It was found that in the two alloys most of the precipitates are δ-hydrides which have fcc structure with the lattice parameter a = 0.44 nm. Two basic orientation relationships and habit planes of the precipitates are determined. Twin structure was observed in both alloys.
