The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the s...The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the systemic design and working face out-play, tried to perfect the caving mining technology of hard-thick coal seams further.展开更多
Introduction: Work environments create the basis for arduous nursing work. This is what led us to research the factors of arduousness in the exercise of the health profession in North Benin, through this study. Method...Introduction: Work environments create the basis for arduous nursing work. This is what led us to research the factors of arduousness in the exercise of the health profession in North Benin, through this study. Methods: This is a cross-sectional and descriptive study which focused on health professionals in the health zones of Parakou-N’dali and Tchaourou. The sampling was an exhaustive census. All health workers who had given their free and informed consent were included. The data was collected using a questionnaire. The variables studied were the factors of arduous work and socio-professional characteristics. The data collected was processed and analyzed with the Epi info 7.2.0.1 software. Results: A total of 692 were surveyed, the participation rate was 85.11% and the sex ratio (M/F) equal to 0.7. The average age was 38 years old. Nurses made up 32.66% of the sample. They were 86.42% subject to night work and 82.66% to alternating work. Overall, 70.23% worked more than 40 hours per week. Between 78.12% and 96.46% of non-specialist doctors, nurses, midwives and biomedical analysis technicians were required to work night shifts. Nurses, midwives, radiology and laboratory technicians were between 89.53% and 97.35%, organized in alternating work. In the sample, 55.20% complained about the insufficient number of work materials, 26.29% handled harmful chemical substances. Among those surveyed, 58.14% had been attacked. Conclusion: All professional categories of caregivers are subject to arduous work. Measures are needed to reverse the situation.展开更多
ZTE Corporation is China’s largest listedtelecommunications equipment provider spe-cialized in offering a full range of tailor-madesolutions for customers in high-,middle-andlow-end markets.
Following is an interview given by Shao Mingli, director-general of China＇s State Food and Drug Administration to our reporter on what is being done to ensure food and drug safety in China. As everybody knows, food a...Following is an interview given by Shao Mingli, director-general of China＇s State Food and Drug Administration to our reporter on what is being done to ensure food and drug safety in China. As everybody knows, food and drug safety is vital to people＇s lives.展开更多
Taking the distribution route optimization of refined oil as background, this paper studies the inventory routing problem of refined oil distribution based on working time equilibrium. In consideration of the constrai...Taking the distribution route optimization of refined oil as background, this paper studies the inventory routing problem of refined oil distribution based on working time equilibrium. In consideration of the constraints of vehicle capacity, time window for unloading oil, service time and demand of each gas station, we take the working time equilibrium of each vehicle as goal and establish an integer programming model for the vehicle routing problem of refined oil distribution, the objective function of the model is to minimize the maximum working time of vehicles. To solve this model, a Lingo program was written and a heuristic algorithm was designed. We further use the random generation method to produce an example with 10 gas stations. The local optimal solution and approximate optimal solution are obtained by using Lingo software and heuristic algorithm respectively. By comparing the approximate optimal solution obtained by heuristic algorithm with the local optimal solution obtained by Lingo software, the feasibility of the model and the effectiveness of the heuristic algorithm are verified. The results of this paper provide a theoretical basis for the scheduling department to formulate the oil distribution plan.展开更多
An approach is presented to characterize the stress response of workpiece in hard machining, accounted for the effect of the initial workpiece hardness, temperature, strain and strain rate on flow stress. AISI H13 wor...An approach is presented to characterize the stress response of workpiece in hard machining, accounted for the effect of the initial workpiece hardness, temperature, strain and strain rate on flow stress. AISI H13 work tool steel was chosen to verify this methodology. The proposed flow stress model demonstrates a good agreement with data collected from published experiments. Therefore, the proposed model can be used to predict the corresponding flow stress-strain response of AISI H13 work tool steel with variation of the initial workpiece hardness in hard machining.展开更多
Tiny as a seed is,it can grow out of hard rocks.Impossible to be realized as your dream may seem,it will come true when the darkest days are over.Nothing is doomed[注定的]unless you give yourself in,and miracles[奇迹]...Tiny as a seed is,it can grow out of hard rocks.Impossible to be realized as your dream may seem,it will come true when the darkest days are over.Nothing is doomed[注定的]unless you give yourself in,and miracles[奇迹]usually occur after struggling through thick and thin[不畏艰险].Chase after your dream,and it will come true sooner or later.展开更多
Integrated Coastal Zone Management is a complex concept that involves various economic, social and environmental factors. There are often conflicting approaches to these factors. Furthermore, when it is decided to imp...Integrated Coastal Zone Management is a complex concept that involves various economic, social and environmental factors. There are often conflicting approaches to these factors. Furthermore, when it is decided to implement structural works in the coastal area, it must be taken into account the particularity of the area, the way in which it is developed and the type of work to be done. The Gulf of Mamaia in the Romanian Black Sea coast is the target of structural changes through the implementation of an extensive coastal rehabilitation program. The works made are of “hard” type and aim to change the shore line configuration. From this perspective, the target of the present paper is to make an analysis between the type of work that is being carried out and another kind of "soft" work aiming especially to favor the ecological reconstruction of the area and the approach of an environmentally friendly concept. Thus, we propose to analyze the two types of works with a view to apply the Bruun rule in order to mitigate the effect of the increase of the sea level and to prevent the shoreline retreat.展开更多
These are excerpts of the speech President Luo Haocai delivered at the Second National Work-Experience Exchange Conference of Human Rights Research Organizations on April 28, 2010.
EDITOR＇S NOTE： Human rights protection in prisons is an important part of China＇s National Human Rights Action Plan and the human rights conditions in prisons constitute an important hallmark of the human rights pr...EDITOR＇S NOTE： Human rights protection in prisons is an important part of China＇s National Human Rights Action Plan and the human rights conditions in prisons constitute an important hallmark of the human rights protection level of the country. In order to get to know more about human rights protection in this special area, this reporter paid a visit to the No. 4 Prison in Henan Province, central China.展开更多
The material selected for this work was the spray formed Vanadis4 high alloy cold working mould steel （abbreviated to V4 steel）. Its microstructure, hot rolling process, and annealing treatment have been investigate...The material selected for this work was the spray formed Vanadis4 high alloy cold working mould steel （abbreviated to V4 steel）. Its microstructure, hot rolling process, and annealing treatment have been investigated. Observed from the optical and electron microscopes, the as-sprayed V4 steel had the finer microstructure of uniform and equiaxial grains ,while after hot rolling for densification and spheroidized annealing, the V4 steel obtained an excellent spheroidized structure that is favorable to subsequent quenching and tempering treatment. The spheroidized structure and level of annealed hardness of the V4 steel are almost the same as expensive imported powder metallurgy the V4 steel. It is difficult to produce V4 steel with the conventional ingot metallurgical technique, so the multi-step and high-cost powder metallurgy method is generally used at present. Compared to the powder metallurgy technique, using the spray forming technique to produce the V4 steel has obvious advantages and potential market competitiveness in reducing production costs, simplifying working process, and shortening the production cycle.展开更多
基金Supported by the Production Safety and Supervision of Management Bureau of China(04-116) the Returned Overseas Scholar Fund of Educational Department of China(2003406)+1 种基金 the Soft Science Planning Program of Shandong Province(A200423-6) the National Soft Science Planed Program (2004DGQ3D090)
文摘The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the systemic design and working face out-play, tried to perfect the caving mining technology of hard-thick coal seams further.
文摘Introduction: Work environments create the basis for arduous nursing work. This is what led us to research the factors of arduousness in the exercise of the health profession in North Benin, through this study. Methods: This is a cross-sectional and descriptive study which focused on health professionals in the health zones of Parakou-N’dali and Tchaourou. The sampling was an exhaustive census. All health workers who had given their free and informed consent were included. The data was collected using a questionnaire. The variables studied were the factors of arduous work and socio-professional characteristics. The data collected was processed and analyzed with the Epi info 7.2.0.1 software. Results: A total of 692 were surveyed, the participation rate was 85.11% and the sex ratio (M/F) equal to 0.7. The average age was 38 years old. Nurses made up 32.66% of the sample. They were 86.42% subject to night work and 82.66% to alternating work. Overall, 70.23% worked more than 40 hours per week. Between 78.12% and 96.46% of non-specialist doctors, nurses, midwives and biomedical analysis technicians were required to work night shifts. Nurses, midwives, radiology and laboratory technicians were between 89.53% and 97.35%, organized in alternating work. In the sample, 55.20% complained about the insufficient number of work materials, 26.29% handled harmful chemical substances. Among those surveyed, 58.14% had been attacked. Conclusion: All professional categories of caregivers are subject to arduous work. Measures are needed to reverse the situation.
文摘ZTE Corporation is China’s largest listedtelecommunications equipment provider spe-cialized in offering a full range of tailor-madesolutions for customers in high-,middle-andlow-end markets.
文摘Following is an interview given by Shao Mingli, director-general of China＇s State Food and Drug Administration to our reporter on what is being done to ensure food and drug safety in China. As everybody knows, food and drug safety is vital to people＇s lives.
文摘Taking the distribution route optimization of refined oil as background, this paper studies the inventory routing problem of refined oil distribution based on working time equilibrium. In consideration of the constraints of vehicle capacity, time window for unloading oil, service time and demand of each gas station, we take the working time equilibrium of each vehicle as goal and establish an integer programming model for the vehicle routing problem of refined oil distribution, the objective function of the model is to minimize the maximum working time of vehicles. To solve this model, a Lingo program was written and a heuristic algorithm was designed. We further use the random generation method to produce an example with 10 gas stations. The local optimal solution and approximate optimal solution are obtained by using Lingo software and heuristic algorithm respectively. By comparing the approximate optimal solution obtained by heuristic algorithm with the local optimal solution obtained by Lingo software, the feasibility of the model and the effectiveness of the heuristic algorithm are verified. The results of this paper provide a theoretical basis for the scheduling department to formulate the oil distribution plan.
基金supported by the Jiangxi Provincial Natural Science Foundation of China(No.550067)Jiangxi Provincial Education Commission Foundation(No.2005-26).
文摘An approach is presented to characterize the stress response of workpiece in hard machining, accounted for the effect of the initial workpiece hardness, temperature, strain and strain rate on flow stress. AISI H13 work tool steel was chosen to verify this methodology. The proposed flow stress model demonstrates a good agreement with data collected from published experiments. Therefore, the proposed model can be used to predict the corresponding flow stress-strain response of AISI H13 work tool steel with variation of the initial workpiece hardness in hard machining.
文摘Tiny as a seed is,it can grow out of hard rocks.Impossible to be realized as your dream may seem,it will come true when the darkest days are over.Nothing is doomed[注定的]unless you give yourself in,and miracles[奇迹]usually occur after struggling through thick and thin[不畏艰险].Chase after your dream,and it will come true sooner or later.
文摘Integrated Coastal Zone Management is a complex concept that involves various economic, social and environmental factors. There are often conflicting approaches to these factors. Furthermore, when it is decided to implement structural works in the coastal area, it must be taken into account the particularity of the area, the way in which it is developed and the type of work to be done. The Gulf of Mamaia in the Romanian Black Sea coast is the target of structural changes through the implementation of an extensive coastal rehabilitation program. The works made are of “hard” type and aim to change the shore line configuration. From this perspective, the target of the present paper is to make an analysis between the type of work that is being carried out and another kind of "soft" work aiming especially to favor the ecological reconstruction of the area and the approach of an environmentally friendly concept. Thus, we propose to analyze the two types of works with a view to apply the Bruun rule in order to mitigate the effect of the increase of the sea level and to prevent the shoreline retreat.
文摘These are excerpts of the speech President Luo Haocai delivered at the Second National Work-Experience Exchange Conference of Human Rights Research Organizations on April 28, 2010.
文摘EDITOR＇S NOTE： Human rights protection in prisons is an important part of China＇s National Human Rights Action Plan and the human rights conditions in prisons constitute an important hallmark of the human rights protection level of the country. In order to get to know more about human rights protection in this special area, this reporter paid a visit to the No. 4 Prison in Henan Province, central China.
文摘The material selected for this work was the spray formed Vanadis4 high alloy cold working mould steel （abbreviated to V4 steel）. Its microstructure, hot rolling process, and annealing treatment have been investigated. Observed from the optical and electron microscopes, the as-sprayed V4 steel had the finer microstructure of uniform and equiaxial grains ,while after hot rolling for densification and spheroidized annealing, the V4 steel obtained an excellent spheroidized structure that is favorable to subsequent quenching and tempering treatment. The spheroidized structure and level of annealed hardness of the V4 steel are almost the same as expensive imported powder metallurgy the V4 steel. It is difficult to produce V4 steel with the conventional ingot metallurgical technique, so the multi-step and high-cost powder metallurgy method is generally used at present. Compared to the powder metallurgy technique, using the spray forming technique to produce the V4 steel has obvious advantages and potential market competitiveness in reducing production costs, simplifying working process, and shortening the production cycle.
