This paper presents the power hardware in the loop(PHIL)validation of a feed forward DC voltage control scheme for the fault ride through(FRT)of voltage source converter(VSC)high voltage DC(HVDC)connected offshore win...This paper presents the power hardware in the loop(PHIL)validation of a feed forward DC voltage control scheme for the fault ride through(FRT)of voltage source converter(VSC)high voltage DC(HVDC)connected offshore wind power plants(WPPs).In the proposed FRT scheme,the WPP collector network AC voltage is actively controlled by considering both the DC voltage error and the AC current from the WPP AC collector system which ensures fast and robust FRT of the VSC HVDC connected offshore WPPs.The PHIL tests were carried out in order to verify the efficacy of the proposed feed forward DC voltage control scheme for enhancing the FRT capability of the VSC HVDC connected WPPs.The PHIL test results have demonstrated the proper control coordination between the offshore WPP and the WPP side VSC and the efficient FRT of the VSC HVDC connected WPPs.展开更多
There is increasing interest in the evaluation of wind turbine control capabilities for providing grid support.Power hardware in the loop(PHIL)simulation is an advanced method that can be used for studying the interac...There is increasing interest in the evaluation of wind turbine control capabilities for providing grid support.Power hardware in the loop(PHIL)simulation is an advanced method that can be used for studying the interaction of hardware with the power network,as the scaled-down actual wind turbine is connected with a simulated system through an amplifier.Special consideration must be made in the design of the PHIL platform to ensure that the system is stable and yields accurate results.This paper presents a method for stabilizing the PHIL interface and improving the accuracy of PHIL simulation in a real-time application.The method factors in both the power and voltage scaling level,and a phase compensation scheme.It uses the reactive power control capability of the wind turbine inverter to eliminate the phase shift imposed by the feedback current filter.This is accomplished with no negative impact on the dynamic behavior of the wind turbine.The PHIL simulation results demonstrate the effectiveness of the proposed stability analysis method and phase compensation scheme.The strength of the platform is demonstrated by extending the simulation method to wind turbine control validation.展开更多
Assessment of railway wheel slide protection(WSP) systems involves the execution of complex experimental activities that are quite expensive and time-consuming, since they involve the physical reproduction of degraded...Assessment of railway wheel slide protection(WSP) systems involves the execution of complex experimental activities that are quite expensive and time-consuming, since they involve the physical reproduction of degraded adhesion conditions on a real railway line. WSP is devoted to regulating applied braking forces to avoid excessive wheel sliding in case of degraded adhesion conditions between wheel and rail. WSP must be also compliant to safety specifications related to assured braking performances and consumed air. Hardware in the loop(HIL) testing offers an affordable and sustainable way to accelerate these activities optimizing cost, duration and safety of experimental activities performed online. HIL test rigs are subjected to continuous updates, customization and natural ageing of their components. This work investigates the criteria that can be adopted to assure a continuous monitoring and validation of a real WSP test rig, the Italian test rig of Firenze Osmannoro.展开更多
With the iterative development of autonomous driving technology,selfdriving cars will be one of the most competitive areas in the future.In order to provide students with a better understanding and more comprehensive ...With the iterative development of autonomous driving technology,selfdriving cars will be one of the most competitive areas in the future.In order to provide students with a better understanding and more comprehensive grasp of autonomous driving technology,a hardware-in-the-loop based autonomous driving simulation test platform has been built.The hardware-in-the-loop system integrates MATLAB/Simulink to build the core control algorithm model,CarMaker simulation software to provide a virtual display interface and vehicle dynamics model,and NVIDIA Jetson to deploy the ECU(Electronic Control Unit)to improve the algorithm power and Logitech G29 series driving simulators providing signal input.It provides a simulation test platform for the development and testing of advanced driver assistance systems,the development and testing of upper layer control algorithms and underlying actuators for autonomous driving,and can provide a teaching and experimental platform for undergraduate students and a development foundation for postgraduate practice.展开更多
Integration of distributed generation(DG)can change the fault current level and direction in the distribution system,which affects the related protection system.In order to limit the negative impact of DG integration ...Integration of distributed generation(DG)can change the fault current level and direction in the distribution system,which affects the related protection system.In order to limit the negative impact of DG integration and upgrade the protection system performance,an intelligent coordinated protection and control strategy is proposed.A cost based optimization method is adopted to minimize the operation costs of possible solutions.Its aim is to define the optimal relay settings for the present operation condition,and the most suitable control mode of converter based wind turbine DG.Case studies on a hardware in the loop real time simulation platform demonstrate the proposed protection strategy.展开更多
文摘This paper presents the power hardware in the loop(PHIL)validation of a feed forward DC voltage control scheme for the fault ride through(FRT)of voltage source converter(VSC)high voltage DC(HVDC)connected offshore wind power plants(WPPs).In the proposed FRT scheme,the WPP collector network AC voltage is actively controlled by considering both the DC voltage error and the AC current from the WPP AC collector system which ensures fast and robust FRT of the VSC HVDC connected offshore WPPs.The PHIL tests were carried out in order to verify the efficacy of the proposed feed forward DC voltage control scheme for enhancing the FRT capability of the VSC HVDC connected WPPs.The PHIL test results have demonstrated the proper control coordination between the offshore WPP and the WPP side VSC and the efficient FRT of the VSC HVDC connected WPPs.
基金supported in part by the National Basic Research Program of China(973 Program)under Grant 2012CB215105.
文摘There is increasing interest in the evaluation of wind turbine control capabilities for providing grid support.Power hardware in the loop(PHIL)simulation is an advanced method that can be used for studying the interaction of hardware with the power network,as the scaled-down actual wind turbine is connected with a simulated system through an amplifier.Special consideration must be made in the design of the PHIL platform to ensure that the system is stable and yields accurate results.This paper presents a method for stabilizing the PHIL interface and improving the accuracy of PHIL simulation in a real-time application.The method factors in both the power and voltage scaling level,and a phase compensation scheme.It uses the reactive power control capability of the wind turbine inverter to eliminate the phase shift imposed by the feedback current filter.This is accomplished with no negative impact on the dynamic behavior of the wind turbine.The PHIL simulation results demonstrate the effectiveness of the proposed stability analysis method and phase compensation scheme.The strength of the platform is demonstrated by extending the simulation method to wind turbine control validation.
文摘Assessment of railway wheel slide protection(WSP) systems involves the execution of complex experimental activities that are quite expensive and time-consuming, since they involve the physical reproduction of degraded adhesion conditions on a real railway line. WSP is devoted to regulating applied braking forces to avoid excessive wheel sliding in case of degraded adhesion conditions between wheel and rail. WSP must be also compliant to safety specifications related to assured braking performances and consumed air. Hardware in the loop(HIL) testing offers an affordable and sustainable way to accelerate these activities optimizing cost, duration and safety of experimental activities performed online. HIL test rigs are subjected to continuous updates, customization and natural ageing of their components. This work investigates the criteria that can be adopted to assure a continuous monitoring and validation of a real WSP test rig, the Italian test rig of Firenze Osmannoro.
文摘With the iterative development of autonomous driving technology,selfdriving cars will be one of the most competitive areas in the future.In order to provide students with a better understanding and more comprehensive grasp of autonomous driving technology,a hardware-in-the-loop based autonomous driving simulation test platform has been built.The hardware-in-the-loop system integrates MATLAB/Simulink to build the core control algorithm model,CarMaker simulation software to provide a virtual display interface and vehicle dynamics model,and NVIDIA Jetson to deploy the ECU(Electronic Control Unit)to improve the algorithm power and Logitech G29 series driving simulators providing signal input.It provides a simulation test platform for the development and testing of advanced driver assistance systems,the development and testing of upper layer control algorithms and underlying actuators for autonomous driving,and can provide a teaching and experimental platform for undergraduate students and a development foundation for postgraduate practice.
基金supported by Norwegian University of Science and Technology.
文摘Integration of distributed generation(DG)can change the fault current level and direction in the distribution system,which affects the related protection system.In order to limit the negative impact of DG integration and upgrade the protection system performance,an intelligent coordinated protection and control strategy is proposed.A cost based optimization method is adopted to minimize the operation costs of possible solutions.Its aim is to define the optimal relay settings for the present operation condition,and the most suitable control mode of converter based wind turbine DG.Case studies on a hardware in the loop real time simulation platform demonstrate the proposed protection strategy.