Cascaded ELM-Based Joint Frame Synchronization and Channel Estimation over Rician Fading Channel with Hardware Imperfections

Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.

A Novel Quantization and Model Compression Approach for Hardware Accelerators in Edge Computing

Massive computational complexity and memory requirement of artificial intelligence models impede their deploy-ability on edge computing devices of the Internet of Things(IoT).While Power-of-Two(PoT)quantization is pro-posed to improve the efficiency for edge inference of Deep Neural Networks(DNNs),existing PoT schemes require a huge amount of bit-wise manipulation and have large memory overhead,and their efficiency is bounded by the bottleneck of computation latency and memory footprint.To tackle this challenge,we present an efficient inference approach on the basis of PoT quantization and model compression.An integer-only scalar PoT quantization(IOS-PoT)is designed jointly with a distribution loss regularizer,wherein the regularizer minimizes quantization errors and training disturbances.Additionally,two-stage model compression is developed to effectively reduce memory requirement,and alleviate bandwidth usage in communications of networked heterogenous learning systems.The product look-up table(P-LUT)inference scheme is leveraged to replace bit-shifting with only indexing and addition operations for achieving low-latency computation and implementing efficient edge accelerators.Finally,comprehensive experiments on Residual Networks(ResNets)and efficient architectures with Canadian Institute for Advanced Research(CIFAR),ImageNet,and Real-world Affective Faces Database(RAF-DB)datasets,indicate that our approach achieves 2×∼10×improvement in the reduction of both weight size and computation cost in comparison to state-of-the-art methods.A P-LUT accelerator prototype is implemented on the Xilinx KV260 Field Programmable Gate Array(FPGA)platform for accelerating convolution operations,with performance results showing that P-LUT reduces memory footprint by 1.45×,achieves more than 3×power efficiency and 2×resource efficiency,compared to the conventional bit-shifting scheme.

A High Efficiency Hardware Implementation of S-Boxes Based on Composite Field for Advanced Encryption Standard

The SubBytes (S-box) transformation is the most crucial operation in the AES algorithm, significantly impacting the implementation performance of AES chips. To design a high-performance S-box, a segmented optimization implementation of the S-box is proposed based on the composite field inverse operation in this paper. This proposed S-box implementation is modeled using Verilog language and synthesized using Design Complier software under the premise of ensuring the correctness of the simulation result. The synthesis results show that, compared to several current S-box implementation schemes, the proposed implementation of the S-box significantly reduces the area overhead and critical path delay, then gets higher hardware efficiency. This provides strong support for realizing efficient and compact S-box ASIC designs.

HARDWARE DEMODULATION METHOD FOR &D EDGEDETEOTION AND ERROR OOMPENSATION

A hardwale demodulation method for 2-D edge detection is proposed. The filtering step and the differential step are implemented by using the hardware circuit. This demodulation circuit simplifies the edgefinder and reduces the measuring cycle. The calibration method of scale setting is also presented,and bymeasuring some calibrated objects,the demodulation errors and the error correction table is obtained.

Campus Information Network Hardware System Design

The emphasis of constructing and developing the campus information network is how to design and optimize the network hardware system. This paper mainly studies the network system structure design, the server system structure design and the network export design, and discusses the network hardware system design and optimization for different scale universities according to different practical demand. The objective is that the network hardware system can meet the demand and have been made full use.

Spinal fusion-hardware construct: Basic concepts and imaging review

The interpretation of spinal images fixed with metallic hardware forms an increasing bulk of daily practice in a busy imaging department. Radiologists are required to be familiar with the instrumentation and operative options used in spinal fixation and fusion procedures, especially in his or her institute. This is critical in evaluating the position of implants and potential complications associated with the operative approaches and spinal fixation devices used. Thus, the radiologist can play an important role in patient care and outcome. This review outlines the advantages and disadvantages of commonly used imaging methods and reports on the best yield for each modality and how to overcome the problematic issues associated with the presence of metallic hardware during imaging. Baseline radiographs are essential as they are the baseline point for evaluation of future studies should patients develop symptoms suggesting possible complications. They may justify further imaging workup with computed tomography, magnetic resonance and/or nuclear medicine studies as the evaluation of a patient with a spinal implant involves a multi-modality approach. This review describes imaging features of potential complications associated with spinal fusion surgery as well as the instrumentation used. This basic knowledge aims to help radiologists approach everyday practice in clinical imaging.

Open-Source Hardware Is a Low-Cost Alternative for Scientific Instrumentation and Research

Scientific research requires the collection of data in order to study, monitor, analyze, describe, or understand a particular process or event. Data collection efforts are often a compromise: manual measurements can be time-consuming and labor-intensive, resulting in data being collected at a low frequency, while automating the data-collection process can reduce labor requirements and increase the frequency of measurements, but at the cost of added expense of electronic data-collecting instrumentation. Rapid advances in electronic technologies have resulted in a variety of new and inexpensive sensing, monitoring, and control capabilities which offer opportunities for implementation in agricultural and natural-resource research applications. An Open Source Hardware project called Arduino consists of a programmable microcontroller development platform, expansion capability through add-on boards, and a programming development environment for creating custom microcontroller software. All circuit-board and electronic component specifications, as well as the programming software, are open-source and freely available for anyone to use or modify. Inexpensive sensors and the Arduino development platform were used to develop several inexpensive, automated sensing and datalogging systems for use in agricultural and natural-resources related research projects. Systems were developed and implemented to monitor soil-moisture status of field crops for irrigation scheduling and crop-water use studies, to measure daily evaporation-pan water levels for quantifying evaporative demand, and to monitor environmental parameters under forested conditions. These studies demonstrate the usefulness of automated measurements, and offer guidance for other researchers in developing inexpensive sensing and monitoring systems to further their research.

Detecting Compromised Kernel Hooks with Support of Hardware Debugging Features

Although there exist a few good schemes to protect the kernel hooks of operating systems, attackers are still able to circumvent existing defense mechanisms with spurious context infonmtion. To address this challenge, this paper proposes a framework, called HooklMA, to detect compromised kernel hooks by using hardware debugging features. The key contribution of the work is that context information is captured from hardware instead of from relatively vulnerable kernel data. Using commodity hardware, a proof-of-concept pro- totype system of HooklMA has been developed. This prototype handles 3 082 dynamic control-flow transfers with related hooks in the kernel space. Experiments show that HooklMA is capable of detecting compomised kernel hooks caused by kernel rootkits. Performance evaluations with UnixBench indicate that runtirre overhead introduced by HooklMA is about 21.5%.

A Hardware Trojan Detection Method Based on the Electromagnetic Leakage

Hardware Trojan(HT) refers to a special module intentionally implanted into a chip or an electronic system. The module can be exploited by the attacker to achieve destructive functions. Unfortunately the HT is difficult to detecte due to its minimal resource occupation. In order to achieve an accurate detection with high efficiency, a HT detection method based on the electromagnetic leakage of the chip is proposed in this paper. At first, the dimensionality reduction and the feature extraction of the electromagnetic leakage signals in each group(template chip, Trojan-free chip and target chip) were realized by principal component analysis(PCA). Then, the Mahalanobis distances between the template group and the other groups were calculated. Finally, the differences between the Mahalanobis distances and the threshold were compared to determine whether the HT had been implanted into the target chip. In addition, the concept of the HT Detection Quality(HTDQ) was proposed to analyze and compare the performance of different detection methods. Our experiment results indicate that the accuracy of this detection method is 91.93%, and the time consumption is 0.042s in average, which shows a high HTDQ compared with three other methods.

Hardware/software co-verification platform for EOS design

Ethernet over SDH/SONET (EOS) is a hotspot in today's data transmission technology for it combines the merits of both Ethernet and SDH/SONET. However, implementing an EOS system on a chip is complex and needs full verifications. This paper introduces our design of Hardware/Software co-verification platform for EOS design. The hardware platform contains a microprocessor board and an FPGA (Field Programmable Gate Array)-based verification board, and the corresponding software includes test benches running in FPGAs, controlling programs for the microprocessor and a console program with GUI (Graphical User Interface) interface for configuration, management and supervision. The design is cost-effective and has been successfully employed to verify several IP (Intellectual Property) blocks of our EOS chip. Moreover, it is flexible and can be applied as a general-purpose verification platform.

System Verification of Hardware Optimization Based on Edge Detection

Nowadays, digital camera based remote controllers are widely used in people’s daily lives. It is known that the edge detection process plays an essential role in remote controlled applications. In this paper, a system verification platform of hardware optimization based on the edge detection is proposed. The Field-Programmable Gate Array (FPGA) validation is an important step in the Integrated Circuit (IC) design workflow. The Sobel edge detection algorithm is chosen and optimized through the FPGA verification platform. Hardware optimization techniques are used to create a high performance, low cost design. The Sobel edge detection operator is designed and mounted through the system Advanced High-performance Bus (AHB). Different FPGA boards are used for evaluation purposes. It is proved that with the proposed hardware optimization method, the hardware design of the Sobel edge detection operator can save 6% of on-chip resources for the Sobel core calculation and 42% for the whole frame calculation.

THUBrachy:fast Monte Carlo dose calculation tool accelerated by heterogeneous hardware for high-dose-rate brachytherapy

The Monte Carlo(MC)simulation is regarded as the gold standard for dose calculation in brachytherapy,but it consumes a large amount of computing resources.The development of heterogeneous computing makes it possible to substantially accelerate calculations with hardware accelerators.Accordingly,this study develops a fast MC tool,called THUBrachy,which can be accelerated by several types of hardware accelerators.THUBrachy can simulate photons with energy less than 3 MeV and considers all photon interactions in the energy range.It was benchmarked against the American Association of Physicists in Medicine Task Group No.43 Report using a water phantom and validated with Geant4 using a clinical case.A performance test was conducted using the clinical case,showing that a multicore central processing unit,Intel Xeon Phi,and graphics processing unit(GPU)can efficiently accelerate the simulation.GPU-accelerated THUBrachy is the fastest version,which is 200 times faster than the serial version and approximately 500 times faster than Geant4.The proposed tool shows great potential for fast and accurate dose calculations in clinical applications.

Spectral Efficiency of Superimposed Pilots in Cell-Free Massive MIMO Systems with Hardware Impairments

In this paper,the spectral efficiency(SE)of an uplink hardware-constrained cell-free massive multi-input multi-output(MIMO)system with maximal ratio combining(MRC)receiver filters in the context of superimposed pilots(SPs)is investigated.Tractable closed-form SE expressions for the considered system are derived,which share us with opportunities to explore the impacts of the hardware quality coefficient,the length of coherence interval,and the power balance factor between pilot and data signals.Numerical results indicate that the achievable SE deteriorates as the hardware quality decreases and is more susceptible to the hardware impairments at the user equipments(UEs).Besides,we observe that SPs outperform regular pilots(RPs)in terms of SE and this performance gain is heavily dependent on the values of power balance factor and coherence interval.However,the superiorities of SPs over RPs have vanished when severe hardware imperfections are considered.

Preventing Hardware Trojans in Switch Chip Based on Payload Decoupling

Hardware Trojans in integrated circuit chips have the characteristics of being covert,destructive,and difficult to protect,which have seriously endangered the security of the chips themselves and the information systems to which they belong.Existing solutions generally rely on passive detection techniques.In this paper,a hardware Trojans active defense mechanism is designed for network switching chips based on the principle of encryption algorithm.By encoding the data entering the chip,the argot hidden in the data cannot trigger the hardware Trojans that may exist in the chip,so that the chip can work normally even if it is implanted with a hardware Trojans.The proposed method is proved to be effective in preventing hardware Trojans with different trigger characteristics by simulation tests and practical tests on our secure switching chip.

Hardware Performance Evaluation of SHA-3 Candidate Algorithms

Secure Hashing Algorithms (SHA) showed a significant importance in today’s information security applications. The National Institute of Standards and Technology (NIST), held a competition of three rounds to replace SHA1 and SHA2 with the new SHA-3, to ensure long term robustness of hash functions. In this paper, we present a comprehensive hardware evaluation for the final round SHA-3 candidates. The main goal of providing the hardware evaluation is to: find the best algorithm among them that will satisfy the new hashing algorithm standards defined by the NIST. This is based on a comparison made between each of the finalists in terms of security level, throughput, clock frequancey, area, power consumption, and the cost. We expect that the achived results of the comparisons will contribute in choosing the next hashing algorithm (SHA-3) that will support the security requirements of applications in todays ubiquitous and pervasive information infrastructure.

Implementation of Embedded Ethernet Based on Hardware Protocol Stack in Substation Automation System

Embedded Ethernet technology has been utilized increasingly widely as the communication mode in the substation automation system(SAS).This paper introduces the current applying situation about embedded Ethernet in SAS First.After analyzing the protocol levels used in SAS based on embedded Ethernet and the differences between the TCP and UDP,UDP/IP is selected as the communication protocol between the station-level and bay-level devices for its real-time characteristic.Then a new kind of implementation of the embedded Ethernet is presented based on hardware protocol stack.The designed scheme can be implemented easily,reduce cost significantly and shorten developing cycle.

A Hardware Platform Framework for an Intelligent Vehicle Based on a Driving Brain

The type, model, quantity, and location of sensors installed on the intelligent vehicle test platform are different, resulting in different sensor information processing modules, The driving map used in intelligent vehicle test platform has no uniform standard, which leads to different granularity of driving map information, The sensor information processing module is directly associated with the driving map information and decision-making module, which leads to the interface of intelligent driving system software module has no uniform standard, Based on the software and hardware architecture of intelligent vehicle, the sensor information and driving map information are processed by using the formal language of driving cognition to form a driving situation graph cluster and output to a decision-making module, and the out- put result of the decision-making module is shown as a cognitive arrow cluster, so that the whole process of intelligent driving from perception to decision-making is completed, The formalization of driving cognition reduces the influence of sensor type, model, quantity, and location on the whole software architec- ture, which makes the software architecture portable on different intelligent driving hardware platforms.

System Outage Probability and Diversity Analysis of a SWIPT Based Two-Way DF Relay Network Under Transceiver Hardware Impairments

This paper investigates the system outage performance of a simultaneous wireless information and power transfer(SWIPT)based two-way decodeand-forward(DF)relay network,where potential hardware impairments(HIs)in all transceivers are considered.After harvesting energy and decoding messages simultaneously via a power splitting scheme,the energy-limited relay node forwards the decoded information to both terminals.Each terminal combines the signals from the direct and relaying links via selection combining.We derive the system outage probability under independent but non-identically distributed Nakagami-m fading channels.It reveals an overall system ceiling(OSC)effect,i.e.,the system falls in outage if the target rate exceeds an OSC threshold that is determined by the levels of HIs.Furthermore,we derive the diversity gain of the considered network.The result reveals that when the transmission rate is below the OSC threshold,the achieved diversity gain equals the sum of the shape parameter of the direct link and the smaller shape parameter of the terminalto-relay links;otherwise,the diversity gain is zero.This is different from the amplify-and-forward(AF)strategy,under which the relaying links have no contribution to the diversity gain.Simulation results validate the analytical results and reveal that compared with the AF strategy,the SWIPT based two-way relaying links under the DF strategy are more robust to HIs and achieve a lower system outage probability.

Low-power emerging memristive designs towards secure hardware systems for applications in internet of things

Emerging memristive devices offer enormous advantages for applications such as non-volatile memories and inmemory computing(IMC),but there is a rising interest in using memristive technologies for security applications in the era of internet of things(IoT).In this review article,for achieving secure hardware systems in IoT,lowpower design techniques based on emerging memristive technology for hardware security primitives/systems are presented.By reviewing the state-of-the-art in three highlighted memristive application areas,i.e.memristive non-volatile memory,memristive reconfigurable logic computing and memristive artificial intelligent computing,their application-level impacts on the novel implementations of secret key generation,crypto functions and machine learning attacks are explored,respectively.For the low-power security applications in IoT,it is essential to understand how to best realize cryptographic circuitry using memristive circuitries,and to assess the implications of memristive crypto implementations on security and to develop novel computing paradigms that will enhance their security.This review article aims to help researchers to explore security solutions,to analyze new possible threats and to develop corresponding protections for the secure hardware systems based on low-cost memristive circuit designs.

Hardware Implementation of STM32 Microcontroller-Based Indoor Environment Monitoring System

Microcontroller is widely used in the intelligent life of modern society. Intelligent development based on Microcontroller to solve the actual needs of people’s life, work, study and other fields is the core of Microcontroller application. Therefore, it is a task for researchers to understand the structure and performance of microcontroller, develop software, and be familiar with the method and process of intelligent development based on microcontroller. And with that in mind, this paper designs and produces a physical hardware system for indoor environment detection based on STM32 microcontroller. The system can detect the light intensity, temperature and humidity, and CO gas concentration in the indoor environment;and the data is integrated and processed by the STM32 microcontroller to display the current parameter values of each quantity in the indoor environment on a 3.5-inch resistive screen;at the same time, the PC can also log in to the OneNET cloud platform through the web page, and display the light intensity, temperature and humidity, and CO gas concentration values in the indoor environment in real time in the device created by OneNET for real-time viewing. The system can also display the light intensity, temperature and humidity, and CO gas concentration values in the indoor environment in real time. The hardware system has been tested and tested to achieve its function.