Preventing Hardware Trojans in Switch Chip Based on Payload Decoupling

Hardware Trojans in integrated circuit chips have the characteristics of being covert,destructive,and difficult to protect,which have seriously endangered the security of the chips themselves and the information systems to which they belong.Existing solutions generally rely on passive detection techniques.In this paper,a hardware Trojans active defense mechanism is designed for network switching chips based on the principle of encryption algorithm.By encoding the data entering the chip,the argot hidden in the data cannot trigger the hardware Trojans that may exist in the chip,so that the chip can work normally even if it is implanted with a hardware Trojans.The proposed method is proved to be effective in preventing hardware Trojans with different trigger characteristics by simulation tests and practical tests on our secure switching chip.

A Hardware Trojan Detection Method Based on the Electromagnetic Leakage

Hardware Trojan(HT) refers to a special module intentionally implanted into a chip or an electronic system. The module can be exploited by the attacker to achieve destructive functions. Unfortunately the HT is difficult to detecte due to its minimal resource occupation. In order to achieve an accurate detection with high efficiency, a HT detection method based on the electromagnetic leakage of the chip is proposed in this paper. At first, the dimensionality reduction and the feature extraction of the electromagnetic leakage signals in each group(template chip, Trojan-free chip and target chip) were realized by principal component analysis(PCA). Then, the Mahalanobis distances between the template group and the other groups were calculated. Finally, the differences between the Mahalanobis distances and the threshold were compared to determine whether the HT had been implanted into the target chip. In addition, the concept of the HT Detection Quality(HTDQ) was proposed to analyze and compare the performance of different detection methods. Our experiment results indicate that the accuracy of this detection method is 91.93%, and the time consumption is 0.042s in average, which shows a high HTDQ compared with three other methods.

Temperature-Triggered Hardware Trojan Based Algebraic Fault Analysis of SKINNY-64-64 Lightweight Block Cipher

SKINNY-64-64 is a lightweight block cipher with a 64-bit block length and key length,and it is mainly used on the Internet of Things(IoT).Currently,faults can be injected into cryptographic devices by attackers in a variety of ways,but it is still difficult to achieve a precisely located fault attacks at a low cost,whereas a Hardware Trojan(HT)can realize this.Temperature,as a physical quantity incidental to the operation of a cryptographic device,is easily overlooked.In this paper,a temperature-triggered HT(THT)is designed,which,when activated,causes a specific bit of the intermediate state of the SKINNY-64-64 to be flipped.Further,in this paper,a THT-based algebraic fault analysis(THT-AFA)method is proposed.To demonstrate the effectiveness of the method,experiments on algebraic fault analysis(AFA)and THT-AFA have been carried out on SKINNY-64-64.In the THT-AFA for SKINNY-64-64,it is only required to activate the THT 3 times to obtain the master key with a 100%success rate,and the average time for the attack is 64.57 s.However,when performing AFA on this cipher,we provide a relation-ship between the number of different faults and the residual entropy of the key.In comparison,our proposed THT-AFA method has better performance in terms of attack efficiency.To the best of our knowledge,this is the first HT attack on SKINNY-64-64.

Efficient Activation Method of Hardware Trojan Based on Greedy Algorithm

To generate test vector sets that can efficiently activate hardware Trojans and improve probability of the hardware Trojan activation,an efficient hardware Trojan activation method is proposed based on greedy algorithm for combinatorial hardware Trojans. Based on the greedy algorithm and the recursive construction method in the combination test,the method formulates appropriate and useful greedy strategy and generates test vector sets with different combinatorial correlation coefficients to activate hardware Trojans in target circuits. The experiment was carried out based on advanced encryption standard（ AES） hardware encryption circuit,different combinatorial hardware Trojans were implanted in AES as target circuits,the experiment of detecting hardware Trojans in target circuits was performed by applying the proposed method and different combinatorial hardware Trojans in target circuits were activated successfully many times in the experiment. The experimental results showthat the test vector sets generated using the proposed method could effectively activate combinatorial hardware Trojans,improve the probability of the hardware Trojan being activated,and also be applied to practice.

HTDet:A Clustering Method Using Information Entropy for Hardware Trojan Detection

Hardware Trojans(HTs)have drawn increasing attention in both academia and industry because of their significant potential threat.In this paper,we propose HTDet,a novel HT detection method using information entropybased clustering.To maintain high concealment,HTs are usually inserted in the regions with low controllability and low observability,which will result in that Trojan logics have extremely low transitions during the simulation.This implies that the regions with the low transitions will provide much more abundant and more important information for HT detection.The HTDet applies information theory technology and a density-based clustering algorithm called Density-Based Spatial Clustering of Applications with Noise(DBSCAN)to detect all suspicious Trojan logics in the circuit under detection.The DBSCAN is an unsupervised learning algorithm,that can improve the applicability of HTDet.In addition,we develop a heuristic test pattern generation method using mutual information to increase the transitions of suspicious Trojan logics.Experiments on circuit benchmarks demonstrate the effectiveness of HTDet.

An Evolutionary Algorithm for Non-Destructive Reverse Engineering of Integrated Circuits

In hardware Trojan detection technology, destructive reverse engineering can restore an original integrated circuitwith the highest accuracy. However, this method has a much higher overhead in terms of time, effort, and cost thanbypass detection. This study proposes an algorithm, called mixed-feature gene expression programming, whichapplies non-destructive reverse engineering to the chip with bypass detection data. It aims to recover the originalintegrated circuit hardware, or else reveal the unknown circuit design in the chip.

Trusted Integrated Circuits: The Problem and Challenges

Hardware security has become more and more important in current information security architecture. Recently collected reports have shown that there may have been considerable hardware attacks prepared for possible military usage from all over the world. Due to the intrinsic difference from software security, hardware security has some special features and challenges. In order to guarantee hardware security, academia has proposed the concept of trusted integrated circuits,which aims at a secure circulation of IC design, manufacture and chip using. This paper reviews the main problems of trusted integrated circuits, and concludes four key domains of the trusted IC, namely the trusted IC design, trusted manufacture,trusted IP protection, and trusted chip authentication. The main challenges in those domains are also analyzed based on the current known techniques. Finally, the main limitations of the current techniques and possible future trends are discussed.