Harmful Algal Blooms (HAB) were analyzed to trace the outbreak of dinoflagellate Cochlonidium polykrikoides on the Korean coast from 1993 to 2019 along with relationship to volcanic eruptions. Parameters associated wi...Harmful Algal Blooms (HAB) were analyzed to trace the outbreak of dinoflagellate Cochlonidium polykrikoides on the Korean coast from 1993 to 2019 along with relationship to volcanic eruptions. Parameters associated with blooms and fishery damage were sunspot number, El Ni?o/La Ni?a events, Kuroshio Current, and volcanic eruptions in the South China Sea including Indonesia and the Philippines. HAB development was halted in seawater due to the sulfur compounds (H2S, SO2, sulfates) from volcanic eruptions inducing the deficiency of the dissolved iron (Fe) in the seawater. Cochlonidium polykrikoides blooms could be predicted by the minimal sunspot number during La Ni?a event or weak volcanic eruptions in Indonesia and the Philippines. On line monitoring of HAB was suggested using a prototype detector of Cochlonidium polykrikoides at wavelength of 300 nm with the concentration linearity (R2 = 0.9972) between 1000 and 6000 cells/ml. HABs on the Korean coast were negligible when there were volcanic eruptions in either Indonesia or Philippines from May to August. Fishery damage was linearly proportional (R2 = 0.2986) to the maximal concentration of HAB while 5000 cells/ml was the minimal concentration of HAB with high linearity (R2 = 0.7629), caused by old cysts of Cochlonidium polykrikoides on the Korean coast rather than the fresh ones carried by the Kuroshio Current from the Philippines. Fishery damage was reversely proportional to the number of sunspots;the maximal number of sunspots induced frequent volcanic eruption in Indonesia and the Philippines for retardation of HAB with less fishery damage in Korea while the minimal number of sunspots caused less volcanic eruptions for thereby enhancing HAB resulting in more fishery damage. It was proposed that a yellow LED be used at 590 nm as a photochemical expellent as well as H2S gas bubbling at a 0.5 meter depth on the surface of the fish cage to inactivate chemically Cochlonidium polykrikoides due to the deficiency of essential iron in the seawater. In addition, the physical method of blanketing the cage cloth with smaller pore diameter than that of HAB was used for prevention of Cochlonidium polykrikoides penetrating into the fish cage.展开更多
High-mass fraction silicon aluminium composite(Si/Al composite) has unique properties of high specific strength, low thermal expansion coefficient, excellent wear resistance and weldability. It has attracted many appl...High-mass fraction silicon aluminium composite(Si/Al composite) has unique properties of high specific strength, low thermal expansion coefficient, excellent wear resistance and weldability. It has attracted many applications in terms of radar communication, aerospace and automobile industry. However, rapid tool wear resulted from high cutting force and hard abrasion, and damaged machined surfaces are the main problem in machining Si/Al composite. This work aims to reveal the mechanisms of milling-induced damages of 70wt% Si/Al composites. A cutting force analytical model considering the characteristics of both the primary silicon particles and the cutting-edge radius was established. Milling experiments were conducted to verify the validity of the model. The results show that the analytical model exhibits a good consistency with the experimental results, and the error is about 10%. The cutting-edge radius has significant effects on the cutting force, surface roughness and damage formation. With the increase in the cutting-edge radius, both the cutting force and the surface roughness decrease firstly and then increase. When the cutting-edge radius is 27 μm, the surface roughness(Sa) reaches the minimum of 2.3 μm.Milling-induced surface damages mainly contain cracks, pits, scratches, matrix coating and burrs.The damage formation is dominated by the failure mode of primary silicon particles, which includes compressive breakage, intragranular fracture, particle pull-out, and interface debonding. In addition, the high ductility of aluminium matrix leads to matrix coating. This work provides guidance for tool selection and damage inhibition in high-efficiency and high-precision machining of high mass fraction Si/Al composites.展开更多
文摘Harmful Algal Blooms (HAB) were analyzed to trace the outbreak of dinoflagellate Cochlonidium polykrikoides on the Korean coast from 1993 to 2019 along with relationship to volcanic eruptions. Parameters associated with blooms and fishery damage were sunspot number, El Ni?o/La Ni?a events, Kuroshio Current, and volcanic eruptions in the South China Sea including Indonesia and the Philippines. HAB development was halted in seawater due to the sulfur compounds (H2S, SO2, sulfates) from volcanic eruptions inducing the deficiency of the dissolved iron (Fe) in the seawater. Cochlonidium polykrikoides blooms could be predicted by the minimal sunspot number during La Ni?a event or weak volcanic eruptions in Indonesia and the Philippines. On line monitoring of HAB was suggested using a prototype detector of Cochlonidium polykrikoides at wavelength of 300 nm with the concentration linearity (R2 = 0.9972) between 1000 and 6000 cells/ml. HABs on the Korean coast were negligible when there were volcanic eruptions in either Indonesia or Philippines from May to August. Fishery damage was linearly proportional (R2 = 0.2986) to the maximal concentration of HAB while 5000 cells/ml was the minimal concentration of HAB with high linearity (R2 = 0.7629), caused by old cysts of Cochlonidium polykrikoides on the Korean coast rather than the fresh ones carried by the Kuroshio Current from the Philippines. Fishery damage was reversely proportional to the number of sunspots;the maximal number of sunspots induced frequent volcanic eruption in Indonesia and the Philippines for retardation of HAB with less fishery damage in Korea while the minimal number of sunspots caused less volcanic eruptions for thereby enhancing HAB resulting in more fishery damage. It was proposed that a yellow LED be used at 590 nm as a photochemical expellent as well as H2S gas bubbling at a 0.5 meter depth on the surface of the fish cage to inactivate chemically Cochlonidium polykrikoides due to the deficiency of essential iron in the seawater. In addition, the physical method of blanketing the cage cloth with smaller pore diameter than that of HAB was used for prevention of Cochlonidium polykrikoides penetrating into the fish cage.
基金supported by the National Natural Science Foundation of China(No.52075255)the Fundamental Research Funds for the Central Universities(No.NT2021020)。
文摘High-mass fraction silicon aluminium composite(Si/Al composite) has unique properties of high specific strength, low thermal expansion coefficient, excellent wear resistance and weldability. It has attracted many applications in terms of radar communication, aerospace and automobile industry. However, rapid tool wear resulted from high cutting force and hard abrasion, and damaged machined surfaces are the main problem in machining Si/Al composite. This work aims to reveal the mechanisms of milling-induced damages of 70wt% Si/Al composites. A cutting force analytical model considering the characteristics of both the primary silicon particles and the cutting-edge radius was established. Milling experiments were conducted to verify the validity of the model. The results show that the analytical model exhibits a good consistency with the experimental results, and the error is about 10%. The cutting-edge radius has significant effects on the cutting force, surface roughness and damage formation. With the increase in the cutting-edge radius, both the cutting force and the surface roughness decrease firstly and then increase. When the cutting-edge radius is 27 μm, the surface roughness(Sa) reaches the minimum of 2.3 μm.Milling-induced surface damages mainly contain cracks, pits, scratches, matrix coating and burrs.The damage formation is dominated by the failure mode of primary silicon particles, which includes compressive breakage, intragranular fracture, particle pull-out, and interface debonding. In addition, the high ductility of aluminium matrix leads to matrix coating. This work provides guidance for tool selection and damage inhibition in high-efficiency and high-precision machining of high mass fraction Si/Al composites.
