The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is ...The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.展开更多
The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynam...The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynamic simulation. The obtained results have demonstrated that the simulation method has the advantage of high efficiency, more convenience and more insight into the dynamical behavior of the system.展开更多
Modeling technology has been introduced into software testing field. However, how to carry through the testing modeling effectively is still a difficulty. Based on combination of simulation modeling technology and emb...Modeling technology has been introduced into software testing field. However, how to carry through the testing modeling effectively is still a difficulty. Based on combination of simulation modeling technology and embedded real-time software testing method, the process of simulation testing modeling is studied first. And then, the supporting environment of simulation testing modeling is put forward. Furthermore, an approach of embedded real-time software simulation testing modeling including modeling of cross-linked equipments of system under testing (SUT), test case, testing scheduling, and testing system service is brought forward. Finally, the formalized description and execution system of testing models are given, with which we can realize real-time, closed loop, mad automated system testing for embedded real-time software.展开更多
A computer software to simulate the phase transformation during quenching is designed based on Avrami equation and Scheil additivity principle of incubation period. The isothermal transformation diagrams of supercool...A computer software to simulate the phase transformation during quenching is designed based on Avrami equation and Scheil additivity principle of incubation period. The isothermal transformation diagrams of supercooled austenite are described by cubic spline functions. This software is possess of a good graphic interface of Windows style, can simulate the whole process in austenite decomposition during continuous cooling. If the cooling rate was given, the fraction of various microstructures transformed of austenite decomposition during continuous cooling at any temperature can be calculated. The simulation results are checked with the quenching experiment of 45 steel. The results indicate that the simulation results are comparatively close to the experimental results.展开更多
According to the characteristic of Team Software Process (TSP), it adopts a hierarchy-based model combined discrete event model with system dynamics model. This model represents TSP as form of two levels, the inner ...According to the characteristic of Team Software Process (TSP), it adopts a hierarchy-based model combined discrete event model with system dynamics model. This model represents TSP as form of two levels, the inner level embodies the continuity of the software process, the outer embodies the software development process by phases, and the structure and principle of the model is explained in detail, then formalization description of the model is offered. At last, an example is presented to demonstrate the simulation process and result. This model can simulate team software process from various angles, supervise and predict the software process. Also it can make the management of software development become more scientific and improve the quality of software.展开更多
A flexible manufacturing system (FMS) is a highly automated, complex system. Simulation is a well-proven method to design or analyze an FMS. Deployment of a radio frequency identification (RFID) system in FMS produces...A flexible manufacturing system (FMS) is a highly automated, complex system. Simulation is a well-proven method to design or analyze an FMS. Deployment of a radio frequency identification (RFID) system in FMS produces large volumes of RFID data streams, which provide valuable information to improve the operation of FMS. Different frameworks are presented in this paper regarding the use of RFID data streams in an FMS simulation. Simulations are performed with AutoMod software. Related technical details are also presented. The paper’s structure is complied as the following steps: step 1, the introduction of AMHS, FMS and AutoMod;step 2, FMS simulation using AutoMod software;step 3, simulation frameworks driven by RFID data streams;step 4, conclusion.展开更多
In view of the flaws of component-based software (CBS) reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS relia...In view of the flaws of component-based software (CBS) reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model (MMFSQM). Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.展开更多
This study presents three kinds of skid-mounted plants, including single mixed refrigerant cycle (MRC), nitrogen expander cycle, and natural gas (NG) Claude cycle. Hysys simulation shows that single MRC is the mos...This study presents three kinds of skid-mounted plants, including single mixed refrigerant cycle (MRC), nitrogen expander cycle, and natural gas (NG) Claude cycle. Hysys simulation shows that single MRC is the most efficient cycle among the three. The specific power of single MRC liquefiers is 1 485 k.l/kg, 15% higher than that of large liquefaction process. Considering the recovery of stranded-gas, commercial analysis suggests that the initial cost of LNG plants ranging from 1 to 100 ms/day can be paid back in 2 to 4 years.展开更多
Based on a method using numerical simulation equations and their solution schemes for liquid metal flows andheat transfer during mold filling and the solidification process of casting, 3-D numerical simulation softwar...Based on a method using numerical simulation equations and their solution schemes for liquid metal flows andheat transfer during mold filling and the solidification process of casting, 3-D numerical simulation software SRIFCAST wascreated. This includes enmeshment of casting; velocity and temperature fields calculation; displaying iso-temperature lines;velocity vectors and 3-D temperature fields on a Windows 9x operating system. SRIFCAST was applied to produce soundcastings of automobile and diesel engines, and also to connect with microstructure simulation for ductile iron castings.展开更多
This study presents a decision making process in three steps of knowledge management for test organization using process simulation and financial analysis. First, project cost assessment of test knowledge management p...This study presents a decision making process in three steps of knowledge management for test organization using process simulation and financial analysis. First, project cost assessment of test knowledge management process subjects to different project duration and number of staffs. Two knowledge management simulation models representing experienced personnel with knowledge sharing and inexperienced personnel with internal training respectively are employed to contrast test personnel capability. Second, performance evaluation of software testing process by different personnel capability is conducted to simulate system test using three project metrics, namely, duration, effort cost, and quality. Third, a comparative financial analysis is prepared to determine the best solution by return on investment, payback period, and benefit cost ratio. The results from three stages of finding are discussed to arrive at the final scenario. We provide a case study evaluating how software testing industry needs to build effective test organization with high quality personnel for sustainable development and improvement.展开更多
Modelling and simulation has become an important tool in research and development. Simulation models are used to develop better understanding of the internal properties and impact of various parameters on the final qu...Modelling and simulation has become an important tool in research and development. Simulation models are used to develop better understanding of the internal properties and impact of various parameters on the final quality of the product or process. Simulation model reduces the number of experiments and saves the wastage of material, time and money and are widely used in automobile industry, aircrafts manufacturing, process engineering, training for military, health care sector and many more. Wood Plastic Composite (WPC) is a bio-composite made by mixing wood fibers and plastic granules together at high temperature by compression molding or injection molding. A large quantity of WPC is rejected due to poor quality and low mechanical strength. There is a need to improve the understanding of the wood plastic composites, with both theoretical and experimental analysis. The impact of various parameters and processing conditions on the final product is not known to the industry people, due to less simulation models in this field. A new simulation software WPC Soft is developed to predict the mechanical and thermal properties of WPC. The software can predict the mechanical and thermal properties of WPC. The simulation results were validated with the experimental results and it was observed that the predicted values are quite close to the experimental values and with the further refining of the model, prediction can be further improved. The present simulation software can be easily used by the industry people and it requires very little knowledge of computers or modeling for its operation.展开更多
The simulation of underwater acoustic information flow is an important way to research sonar performance and its engagement effectiveness in the ocean environment.This paper analyzes the significance of modeling an op...The simulation of underwater acoustic information flow is an important way to research sonar performance and its engagement effectiveness in the ocean environment.This paper analyzes the significance of modeling an open and sophisticated simulation software architecture by object-oriented method,and introduces the modeling processes and expression method of simulation architecture.According to the requirements of simulation system and the underwater acoustic information flow,the logical architecture of simulation software system is modeled by the object-oriented method.A use-case view captured the system requirements.The logical view shows the logical architecture of software system.The simulation software is decomposed into the loose coupling constituent parts by layering and partitioning the packages for maintainability.The design patterns enabled the simulation software to have good expansibility and reusability.The simulation system involving multi-targets and multi-sonar is developed based on the architecture model.Practices show that the model meets the needs for simulating an open and sophisticated system.展开更多
A future constellation of at least four geomagnetic satellites(designated Macao Scientific Satellite-1(MSS-1)and Macao Scientific Satellite-2(MSS-2))was recently proposed,to continue high-quality geomagnetic observati...A future constellation of at least four geomagnetic satellites(designated Macao Scientific Satellite-1(MSS-1)and Macao Scientific Satellite-2(MSS-2))was recently proposed,to continue high-quality geomagnetic observations in the post-Swarm period,focusing especially on collecting data that will provide a global,three-dimensional survey of the geomagnetic field.In this paper,we present a simulation of two years of orbits(2020.01.01-2022.01.01)of two satellites(tentatively denoted as MSS-2)that are constellated in elliptical(200×5,300 km)low-perigee orbits.By comparing error variances of Gauss coefficients,we investigate the sensitivity of lithospheric magnetic field modelling to data collected from various satellite orbits,including a near circular reference orbit of 300×350km,and elliptical orbit of 180×5,300 km,220×5,300 km,200×3,000 km and 200×1,500 km.We find that in two years the two MSS-2 satellites can collect 35,000 observations at altitude below 250 km,data that will be useful in advancing the quality of lithospheric magnetic field modelling;this number of observations reflects the fact that only 4.5%of the flight time of these satellites will be below250 km(just 6.4%of their flight time below 300 km).By combining observations from the MSS-2 satellites’elliptical orbits of 200×5,300km with observations from a circular reference orbit,the variance of the geomagnetic model can be reduced by a factor of 285 at spherical harmonic degree n=200 and by a factor of 1,300 at n=250.The planned lower perigee of their orbits allows the new satellites to collect data at unprecedentedly lower altitudes,thus dramatically improving the spatial resolution of satellite-derived lithospheric field models,(up to 80%at n=150).In addition,lowering the apogee increases the time interval during which the satellites fly at near-Earth altitudes,thus improving the model predictions at all spherical harmonic degrees(around 52%-62%at n=150).The upper limit of the expected improvement to the field model at the orbital apogee is not as good as at the perigee.However,data from the MSS-1 orbit can help fill the gap between data from the MSS-2 orbits and from the circular reference orbit for the low-degree part of the model.The feasibility of even lower-altitude flight requires further discussion with satellite engineers.展开更多
The first step for engineering students to understand the practical system is to describe the system,which means to establish the mathematic model for the considered system.However,traditional mathematical modeling te...The first step for engineering students to understand the practical system is to describe the system,which means to establish the mathematic model for the considered system.However,traditional mathematical modeling techniques are not readily assimilated by students,because the traditional modeling needs to obey the complicated physical laws for different engineering areas and requires a highly iterative process.In this paper,the simulation-based graphic modeling method is introduced to help students model the system and improve their performance in engineering education.The results from the questionnaire indicate that the simulation-based graphic method can help students to do the modeling of the system and improve their performance compared to the traditional ways.展开更多
基金support from the National Key Research and Development Program of China(No.2018YFD0900704)the National Natural Science Foundation of China(No.31972796).
文摘The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.
文摘The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynamic simulation. The obtained results have demonstrated that the simulation method has the advantage of high efficiency, more convenience and more insight into the dynamical behavior of the system.
文摘Modeling technology has been introduced into software testing field. However, how to carry through the testing modeling effectively is still a difficulty. Based on combination of simulation modeling technology and embedded real-time software testing method, the process of simulation testing modeling is studied first. And then, the supporting environment of simulation testing modeling is put forward. Furthermore, an approach of embedded real-time software simulation testing modeling including modeling of cross-linked equipments of system under testing (SUT), test case, testing scheduling, and testing system service is brought forward. Finally, the formalized description and execution system of testing models are given, with which we can realize real-time, closed loop, mad automated system testing for embedded real-time software.
文摘A computer software to simulate the phase transformation during quenching is designed based on Avrami equation and Scheil additivity principle of incubation period. The isothermal transformation diagrams of supercooled austenite are described by cubic spline functions. This software is possess of a good graphic interface of Windows style, can simulate the whole process in austenite decomposition during continuous cooling. If the cooling rate was given, the fraction of various microstructures transformed of austenite decomposition during continuous cooling at any temperature can be calculated. The simulation results are checked with the quenching experiment of 45 steel. The results indicate that the simulation results are comparatively close to the experimental results.
基金Supported by the National Defense Basic ResearchFoundation (K1503063165)
文摘According to the characteristic of Team Software Process (TSP), it adopts a hierarchy-based model combined discrete event model with system dynamics model. This model represents TSP as form of two levels, the inner level embodies the continuity of the software process, the outer embodies the software development process by phases, and the structure and principle of the model is explained in detail, then formalization description of the model is offered. At last, an example is presented to demonstrate the simulation process and result. This model can simulate team software process from various angles, supervise and predict the software process. Also it can make the management of software development become more scientific and improve the quality of software.
文摘A flexible manufacturing system (FMS) is a highly automated, complex system. Simulation is a well-proven method to design or analyze an FMS. Deployment of a radio frequency identification (RFID) system in FMS produces large volumes of RFID data streams, which provide valuable information to improve the operation of FMS. Different frameworks are presented in this paper regarding the use of RFID data streams in an FMS simulation. Simulations are performed with AutoMod software. Related technical details are also presented. The paper’s structure is complied as the following steps: step 1, the introduction of AMHS, FMS and AutoMod;step 2, FMS simulation using AutoMod software;step 3, simulation frameworks driven by RFID data streams;step 4, conclusion.
基金Supported by the National High Technology Research and Development Program of China(No.2008AA01A201)the National Nature Science Foundation of China(No.60503015,90818016)
文摘In view of the flaws of component-based software (CBS) reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model (MMFSQM). Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.
文摘This study presents three kinds of skid-mounted plants, including single mixed refrigerant cycle (MRC), nitrogen expander cycle, and natural gas (NG) Claude cycle. Hysys simulation shows that single MRC is the most efficient cycle among the three. The specific power of single MRC liquefiers is 1 485 k.l/kg, 15% higher than that of large liquefaction process. Considering the recovery of stranded-gas, commercial analysis suggests that the initial cost of LNG plants ranging from 1 to 100 ms/day can be paid back in 2 to 4 years.
基金The reseach is supported by the TG 2000067208 project
文摘Based on a method using numerical simulation equations and their solution schemes for liquid metal flows andheat transfer during mold filling and the solidification process of casting, 3-D numerical simulation software SRIFCAST wascreated. This includes enmeshment of casting; velocity and temperature fields calculation; displaying iso-temperature lines;velocity vectors and 3-D temperature fields on a Windows 9x operating system. SRIFCAST was applied to produce soundcastings of automobile and diesel engines, and also to connect with microstructure simulation for ductile iron castings.
文摘This study presents a decision making process in three steps of knowledge management for test organization using process simulation and financial analysis. First, project cost assessment of test knowledge management process subjects to different project duration and number of staffs. Two knowledge management simulation models representing experienced personnel with knowledge sharing and inexperienced personnel with internal training respectively are employed to contrast test personnel capability. Second, performance evaluation of software testing process by different personnel capability is conducted to simulate system test using three project metrics, namely, duration, effort cost, and quality. Third, a comparative financial analysis is prepared to determine the best solution by return on investment, payback period, and benefit cost ratio. The results from three stages of finding are discussed to arrive at the final scenario. We provide a case study evaluating how software testing industry needs to build effective test organization with high quality personnel for sustainable development and improvement.
文摘Modelling and simulation has become an important tool in research and development. Simulation models are used to develop better understanding of the internal properties and impact of various parameters on the final quality of the product or process. Simulation model reduces the number of experiments and saves the wastage of material, time and money and are widely used in automobile industry, aircrafts manufacturing, process engineering, training for military, health care sector and many more. Wood Plastic Composite (WPC) is a bio-composite made by mixing wood fibers and plastic granules together at high temperature by compression molding or injection molding. A large quantity of WPC is rejected due to poor quality and low mechanical strength. There is a need to improve the understanding of the wood plastic composites, with both theoretical and experimental analysis. The impact of various parameters and processing conditions on the final product is not known to the industry people, due to less simulation models in this field. A new simulation software WPC Soft is developed to predict the mechanical and thermal properties of WPC. The software can predict the mechanical and thermal properties of WPC. The simulation results were validated with the experimental results and it was observed that the predicted values are quite close to the experimental values and with the further refining of the model, prediction can be further improved. The present simulation software can be easily used by the industry people and it requires very little knowledge of computers or modeling for its operation.
文摘The simulation of underwater acoustic information flow is an important way to research sonar performance and its engagement effectiveness in the ocean environment.This paper analyzes the significance of modeling an open and sophisticated simulation software architecture by object-oriented method,and introduces the modeling processes and expression method of simulation architecture.According to the requirements of simulation system and the underwater acoustic information flow,the logical architecture of simulation software system is modeled by the object-oriented method.A use-case view captured the system requirements.The logical view shows the logical architecture of software system.The simulation software is decomposed into the loose coupling constituent parts by layering and partitioning the packages for maintainability.The design patterns enabled the simulation software to have good expansibility and reusability.The simulation system involving multi-targets and multi-sonar is developed based on the architecture model.Practices show that the model meets the needs for simulating an open and sophisticated system.
基金Y Jiang is supported by the Macao FoundationMacao Science and Technology Development Fund,grant No.0001/2019/A1by the Pre-research Project on Civil Aerospace Technologies No.D020303/D020308 funded by China National Space Administration。
文摘A future constellation of at least four geomagnetic satellites(designated Macao Scientific Satellite-1(MSS-1)and Macao Scientific Satellite-2(MSS-2))was recently proposed,to continue high-quality geomagnetic observations in the post-Swarm period,focusing especially on collecting data that will provide a global,three-dimensional survey of the geomagnetic field.In this paper,we present a simulation of two years of orbits(2020.01.01-2022.01.01)of two satellites(tentatively denoted as MSS-2)that are constellated in elliptical(200×5,300 km)low-perigee orbits.By comparing error variances of Gauss coefficients,we investigate the sensitivity of lithospheric magnetic field modelling to data collected from various satellite orbits,including a near circular reference orbit of 300×350km,and elliptical orbit of 180×5,300 km,220×5,300 km,200×3,000 km and 200×1,500 km.We find that in two years the two MSS-2 satellites can collect 35,000 observations at altitude below 250 km,data that will be useful in advancing the quality of lithospheric magnetic field modelling;this number of observations reflects the fact that only 4.5%of the flight time of these satellites will be below250 km(just 6.4%of their flight time below 300 km).By combining observations from the MSS-2 satellites’elliptical orbits of 200×5,300km with observations from a circular reference orbit,the variance of the geomagnetic model can be reduced by a factor of 285 at spherical harmonic degree n=200 and by a factor of 1,300 at n=250.The planned lower perigee of their orbits allows the new satellites to collect data at unprecedentedly lower altitudes,thus dramatically improving the spatial resolution of satellite-derived lithospheric field models,(up to 80%at n=150).In addition,lowering the apogee increases the time interval during which the satellites fly at near-Earth altitudes,thus improving the model predictions at all spherical harmonic degrees(around 52%-62%at n=150).The upper limit of the expected improvement to the field model at the orbital apogee is not as good as at the perigee.However,data from the MSS-1 orbit can help fill the gap between data from the MSS-2 orbits and from the circular reference orbit for the low-degree part of the model.The feasibility of even lower-altitude flight requires further discussion with satellite engineers.
基金supported by the Jiangsu Science and Technology Programme(Grant No.BK20230229)the Research Development Fund of Xi’an JiaotongLiverpool University under Grant RDF-21-01-022+1 种基金the XJTLU AI University Research Centre,Jiangsu Province Engineering Research Centre of Data ScienceCognitive Computation at XJTLU and SIP AI innovation platform(YZCXPT2022103)。
文摘The first step for engineering students to understand the practical system is to describe the system,which means to establish the mathematic model for the considered system.However,traditional mathematical modeling techniques are not readily assimilated by students,because the traditional modeling needs to obey the complicated physical laws for different engineering areas and requires a highly iterative process.In this paper,the simulation-based graphic modeling method is introduced to help students model the system and improve their performance in engineering education.The results from the questionnaire indicate that the simulation-based graphic method can help students to do the modeling of the system and improve their performance compared to the traditional ways.