This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully ...This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.展开更多
Hazard control of NOx is very important for the long life of hot stove shell and environmental protection. NOx concentrations during different operation periods of hot stove were calculated according to thermodynamica...Hazard control of NOx is very important for the long life of hot stove shell and environmental protection. NOx concentrations during different operation periods of hot stove were calculated according to thermodynamical and dynamical analyses. The results were verified by the previously measured data. Then, the influence of hot stove oper- ation parameters on NOx concentration and the mechanism of liquid water formation in hot stove were studied. The results indicated that in gas period, the dome temperature should be controlled below 1420 ℃ in order to decrease NO~ emission. In the case of banking operation, NOx concentration was about 40--60 times higher than that in gas period. Hence, reasonable measures should be taken to reduce banking operation, especially in the situation of large excess air ratio. Since NOx formed during the whole operation process, the most effective way of preventing liquid water and HNO3 generation is to control the pipe and shell temperature, which should be higher than the condensa- tion temperature of water vapour. The condensation temperature should be considered as the design temperature of pipe and shell for hot stove.展开更多
Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility (ABSL-2), c...Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility (ABSL-2), commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented.展开更多
This paper discusses the nested case-control analysis under a class of general additive-multiplicative hazard models which includes the Cox model and the additive hazard model as special cases.A pseudo-score is constr...This paper discusses the nested case-control analysis under a class of general additive-multiplicative hazard models which includes the Cox model and the additive hazard model as special cases.A pseudo-score is constructed to estimate the regression parameters.The resulting estimator is shown to be consistent and asymptotically normally distributed.The limiting variance-covariance matrix can be consistently estimated by the nested case-control data.A simulation study is conducted to assess the finite sample performance of the proposed estimator and a real example is provided for illustration.展开更多
Prompted by emerging developments in connected and automated vehicles, parallel steering control, one aspect of parallel driving, has become highly important for intelligent vehicles for easing the burden and ensuring...Prompted by emerging developments in connected and automated vehicles, parallel steering control, one aspect of parallel driving, has become highly important for intelligent vehicles for easing the burden and ensuring the safety of human drivers. This paper presents a parallel steering control framework for an intelligent vehicle using moving horizon optimization.The framework considers lateral stability, collision avoidance and actuator saturation and describes them as constraints, which can blend the operation of a human driver and a parallel steering controller effectively. Moreover, the road hazard and the steering operation error are employed to evaluate the operational hazardous of an intelligent vehicle. Under the hazard evaluation,the intelligent vehicle will be mainly operated by the human driver when the vehicle operates in a safe and stable manner.The automated steering driving objective will play an active role and regulate the steering operations of the intelligent vehicle based on the hazard evaluation. To verify the effectiveness of the proposed hazard-evaluation-oriented moving horizon parallel steering control approach, various validations are conducted, and the results are compared with a parallel steering scheme that does not consider automated driving situations. The results illustrate that the proposed parallel steering controller achieves acceptable performance under both conventional conditions and hazardous conditions.展开更多
The main objective of the work presented in this paper was to develop a customized safety training program that can be incorporated into the demolition projects undertaken as part of blight reduction efforts in urban ...The main objective of the work presented in this paper was to develop a customized safety training program that can be incorporated into the demolition projects undertaken as part of blight reduction efforts in urban centers. A subsidiary objective was to devise and implement a safety program evaluation methodology, and gain insights on the relationships between knowledge acquisition through training and trainee demographics. Salient aspects of blight elimination efforts, as well as the main facets of building demolition practices and requirements, were reviewed. Information on various related safety and health hazards was studied in depth with a focus on demolition operations dealing with blighted properties. A unique safety hazard awareness training program was created for demolition workers, contractors and inspectors based on this research. In addition to devising a curriculum of relevant training topics along with traditional and online delivery systems to be employed, effectiveness evaluation instruments were formulated. Based on the limited data collected from the trainees it was concluded that the program was well-received by them and provided effective learning. It was also found that no statistically significant associations existed between the knowledge gain of the trainees, and either their experience level or union status, after taking this training.展开更多
基金Project 2006CB202200 supported by the National Basic Research Program of Chinathe National Major Project of Ministry of Education (304005)the Program for Changjiang Scholars and Innovative Research Team in University of China (NoIRT0656)
文摘This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.
基金Sponsored by National Natural Science Foundation of China(61271303)
文摘Hazard control of NOx is very important for the long life of hot stove shell and environmental protection. NOx concentrations during different operation periods of hot stove were calculated according to thermodynamical and dynamical analyses. The results were verified by the previously measured data. Then, the influence of hot stove oper- ation parameters on NOx concentration and the mechanism of liquid water formation in hot stove were studied. The results indicated that in gas period, the dome temperature should be controlled below 1420 ℃ in order to decrease NO~ emission. In the case of banking operation, NOx concentration was about 40--60 times higher than that in gas period. Hence, reasonable measures should be taken to reduce banking operation, especially in the situation of large excess air ratio. Since NOx formed during the whole operation process, the most effective way of preventing liquid water and HNO3 generation is to control the pipe and shell temperature, which should be higher than the condensa- tion temperature of water vapour. The condensation temperature should be considered as the design temperature of pipe and shell for hot stove.
基金supported by the National Science and Technology Major Projects of Infectious Disease(2012ZX10004-404)
文摘Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility (ABSL-2), commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented.
基金Supported by the National Natural Science Foundation of China(10971033,11101091)
文摘This paper discusses the nested case-control analysis under a class of general additive-multiplicative hazard models which includes the Cox model and the additive hazard model as special cases.A pseudo-score is constructed to estimate the regression parameters.The resulting estimator is shown to be consistent and asymptotically normally distributed.The limiting variance-covariance matrix can be consistently estimated by the nested case-control data.A simulation study is conducted to assess the finite sample performance of the proposed estimator and a real example is provided for illustration.
基金Supported by the National Natural Science Foundation of China (1100202 l) the Doctoral Subject Foundation of the Ministry of Education of China (20070008012) the National High Technology Research and Development Program (2008AA062104)
基金supported by the National Nature Science Foundation of China(61520106008,61790563,U1664263)
文摘Prompted by emerging developments in connected and automated vehicles, parallel steering control, one aspect of parallel driving, has become highly important for intelligent vehicles for easing the burden and ensuring the safety of human drivers. This paper presents a parallel steering control framework for an intelligent vehicle using moving horizon optimization.The framework considers lateral stability, collision avoidance and actuator saturation and describes them as constraints, which can blend the operation of a human driver and a parallel steering controller effectively. Moreover, the road hazard and the steering operation error are employed to evaluate the operational hazardous of an intelligent vehicle. Under the hazard evaluation,the intelligent vehicle will be mainly operated by the human driver when the vehicle operates in a safe and stable manner.The automated steering driving objective will play an active role and regulate the steering operations of the intelligent vehicle based on the hazard evaluation. To verify the effectiveness of the proposed hazard-evaluation-oriented moving horizon parallel steering control approach, various validations are conducted, and the results are compared with a parallel steering scheme that does not consider automated driving situations. The results illustrate that the proposed parallel steering controller achieves acceptable performance under both conventional conditions and hazardous conditions.
文摘The main objective of the work presented in this paper was to develop a customized safety training program that can be incorporated into the demolition projects undertaken as part of blight reduction efforts in urban centers. A subsidiary objective was to devise and implement a safety program evaluation methodology, and gain insights on the relationships between knowledge acquisition through training and trainee demographics. Salient aspects of blight elimination efforts, as well as the main facets of building demolition practices and requirements, were reviewed. Information on various related safety and health hazards was studied in depth with a focus on demolition operations dealing with blighted properties. A unique safety hazard awareness training program was created for demolition workers, contractors and inspectors based on this research. In addition to devising a curriculum of relevant training topics along with traditional and online delivery systems to be employed, effectiveness evaluation instruments were formulated. Based on the limited data collected from the trainees it was concluded that the program was well-received by them and provided effective learning. It was also found that no statistically significant associations existed between the knowledge gain of the trainees, and either their experience level or union status, after taking this training.