Based on the entransy dissipation extremum principle for thermal insulation process,the constructal optimizations for a plane insulation layer of the steel rolling reheating furnace wall with convective and radiative ...Based on the entransy dissipation extremum principle for thermal insulation process,the constructal optimizations for a plane insulation layer of the steel rolling reheating furnace wall with convective and radiative boundary conditions are carried out by taking the minimization of entransy dissipation rate as optimization objective.The optimal construct of the plane insulation layer is obtained.The results show that for the convective heat transfer boundary condition,the optimal constructs of the insulation layer obtained based on the minimizations of the entransy dissipation rate and heat loss rate are obviously different.Comparing the optimal construct obtained based on the minimization of the entransy dissipation rate with that based on the minimization of the heat loss rate,the entransy dissipation rate is reduced by 5.98%,which makes the global thermal insulation performance of the insulation layer improve.For the combined convective and radiative heat transfer boundary condition,compared the insulation layer having an increasing thickness with that having constant thickness and a decreasing thickness,the entransy dissipation rates are reduced by 16.59%and39.72%,respectively,and the global thermal insulation performance of the insulation layer is greatly improved.There exits an optimal constant coefficient a2;optwhich leads to the minimum dimensionless entransy dissipation rate of the insulation layer.The difference between the optimal constant coefficients a2;optobtained based on the minimizations of the entransy dissipation rate and the maximum temperature gradient of the insulation layer is small.This makes the corresponding thermal stress obtained based on the minimum dimensionless entransy dissipation rate also be small,and the global thermal insulation performance and thermal safety of the insulation layer are improved simultaneously.The results obtained can provide some guidelines for the optimal designs of the insulation layers.展开更多
基金supported by the National Key Basic Research and Development Program of China(2012CB720405)the National Natural Science Foundation of China(51176203 and 51206184)the Natural Science Foundation of Hubei Province(2012FFB06905)
文摘Based on the entransy dissipation extremum principle for thermal insulation process,the constructal optimizations for a plane insulation layer of the steel rolling reheating furnace wall with convective and radiative boundary conditions are carried out by taking the minimization of entransy dissipation rate as optimization objective.The optimal construct of the plane insulation layer is obtained.The results show that for the convective heat transfer boundary condition,the optimal constructs of the insulation layer obtained based on the minimizations of the entransy dissipation rate and heat loss rate are obviously different.Comparing the optimal construct obtained based on the minimization of the entransy dissipation rate with that based on the minimization of the heat loss rate,the entransy dissipation rate is reduced by 5.98%,which makes the global thermal insulation performance of the insulation layer improve.For the combined convective and radiative heat transfer boundary condition,compared the insulation layer having an increasing thickness with that having constant thickness and a decreasing thickness,the entransy dissipation rates are reduced by 16.59%and39.72%,respectively,and the global thermal insulation performance of the insulation layer is greatly improved.There exits an optimal constant coefficient a2;optwhich leads to the minimum dimensionless entransy dissipation rate of the insulation layer.The difference between the optimal constant coefficients a2;optobtained based on the minimizations of the entransy dissipation rate and the maximum temperature gradient of the insulation layer is small.This makes the corresponding thermal stress obtained based on the minimum dimensionless entransy dissipation rate also be small,and the global thermal insulation performance and thermal safety of the insulation layer are improved simultaneously.The results obtained can provide some guidelines for the optimal designs of the insulation layers.
