期刊文献+
共找到34,715篇文章
< 1 2 250 >
每页显示 20 50 100
A review of ultra-high temperature heat-resistant energetic materials
1
作者 Rongzheng Zhang Yuangang Xu +4 位作者 Feng Yang Pengcheng Wang Qiuhan Lin Hui Huang Ming Lu 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第8期33-57,共25页
Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed tha... Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed that the thermal stability can be enhanced by introducing amino groups to form intra/inter-molecular hydrogen bonds, constructing conjugate systems and designing symmetrical structures. This article aims to review the physical and chemical properties of ultra-high temperature heat-resistant energetic compounds and provide valuable theoretical insights for the preparation of ultra-high temperature heatresistant energetic materials. We also analyze the selected 20 heat-resistant energetic materials with decomposition temperatures higher than 350℃, serving as templates for the synthesis of various highperformance heat-resistant energetic materials. 展开更多
关键词 heat-resistant energetic materials Organic synthesis CONJUGATED Hydrogen bond Symmetrical structure STABILIZATION
下载PDF
Wire arc additive manufacturing of a heat-resistant Al-Cu-Ag-Sc alloy:microstructures and high-temperature mechanical properties
2
作者 董博伦 蔡笑宇 +4 位作者 夏云浩 刘放 赵宏伟 林三宝 戴鸿滨 《China Welding》 CAS 2023年第4期1-10,共10页
With a high energy efficiency,low geometric limitation,and low cracking susceptivity to cracks,wire arc additive manufacturing(WAAM)has become an ideal substitute for casting in the manufacturing of load-bearing high ... With a high energy efficiency,low geometric limitation,and low cracking susceptivity to cracks,wire arc additive manufacturing(WAAM)has become an ideal substitute for casting in the manufacturing of load-bearing high strength aluminum components in aerospace industry.Recently,in scientific researches,the room temperature mechanical performance of additive manufactured high strength aluminum alloys has been continuously broken through,and proves these alloys can achieve comparable or even higher properties than the forged counterpart.Since the aluminum components for aerospace usage experience high-low temperature cycling due to the absence of atmosphere protection,the high temperature performances of additive manufactured high strength aluminum alloys are also important.However,few research focuses on that.A special 2319Ag Sc with 0.4 wt.%Ag and 0.2 wt.%Sc addition designed for high temperature application is deposited successfully via cold metal transfer(CMT)based on WAAM.The microstructures and high temperature tensile properties are investigated.The results show that the as-deposited 2319Ag Sc alloy presents an alternate distribution of columnar grains and equiaxed grains with no significant textures.Main second phases are Al_(2)Cu and Al3Sc,while co-growth of Al_(2)Cu and bulk Al_(3)Sc is found on the grain boundary.During manufacturing,nanoscale Al_(2)Cu can precipitate out from the matrix.Ag and Mg form nano-scaleΩphase on the Al_(2)Cu precipitates.At 260℃,average yield strengths in the horizontal direction and vertical direction are 87 MPa±2 MPa,87 MPa±4 MPa,while average ultimate tensile strengths are 140 MPa±7 MPa,141 MPa±11 MPa,and average elongations are 11.0%±2.5%,13.5%±3.0%.Anisotropy in different directions is weak. 展开更多
关键词 wire arc additive manufacturing Al-Cu-Ag-Sc heat resistance microstructure high temperature property
下载PDF
Achieving a high-strength dissimilar joint of T91 heat-resistant steel to 316L stainless steel via friction stir welding 被引量:1
3
作者 Zhiwei Wang Min Zhang +6 位作者 Cong Li Fenglei Niu Hao Zhang Peng Xue Dingrui Ni Bolv Xiao Zongyi Ma 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2023年第1期166-176,共11页
The reliable welding of T91 heat-resistant steel to 316L stainless steel is a considerable issue for ensuring the safety in service of ultrasupercritical power generation unit and nuclear fusion reactor,but the high-q... The reliable welding of T91 heat-resistant steel to 316L stainless steel is a considerable issue for ensuring the safety in service of ultrasupercritical power generation unit and nuclear fusion reactor,but the high-quality dissimilar joint of these two steels was difficult to be obtained by traditional fusion welding methods.Here we improved the structure-property synergy in a dissimilar joint of T91 steel to 316L steel via friction stir welding.A defect-free joint with a large bonding interface was produced using a small-sized tool under a relatively high welding speed.The bonding interface was involved in a mixing zone with both mechanical mixing and metallurgical bonding.No obvious material softening was detected in the joint except a negligible hardness decline of only HV~10 in the heat-affected zone of the T91 steel side due to the formation of ferrite phase.The welded joint exhibited an excellent ultimate tensile strength as high as that of the 316L parent metal and a greatly enhanced yield strength on account of the dependable bonding and material renovation in the weld zone.This work recommends a promising technique for producing high-strength weldments of dissimilar nuclear steels. 展开更多
关键词 heat-resistant steel stainless steel friction stir welding dissimilar welding MICROSTRUCTURE mechanical property
下载PDF
电磁导航支气管镜引导下肺结节定位和CT引导下Hook-wire穿刺定位在肺癌根治术中的应用效果及安全性比较
4
作者 郑晓东 聂世威 +2 位作者 周军正 岳光成 张卫民 《癌症进展》 2024年第16期1814-1817,共4页
目的对比电磁导航支气管镜(ENB)引导下肺结节定位和CT引导下Hook-wire穿刺定位在肺癌根治术中的应用效果和安全性。方法将87例行肺癌根治术患者根据定位方式的不同分为CT组(n=45,行CT引导下Hook-wire穿刺定位)和ENB组(n=42,行ENB引导下... 目的对比电磁导航支气管镜(ENB)引导下肺结节定位和CT引导下Hook-wire穿刺定位在肺癌根治术中的应用效果和安全性。方法将87例行肺癌根治术患者根据定位方式的不同分为CT组(n=45,行CT引导下Hook-wire穿刺定位)和ENB组(n=42,行ENB引导下肺结节定位)。比较两组患者手术情况、切缘阳性率、心肺功能指标、应激指标和并发症发生情况。结果ENB组患者定位时间、定位后等待时间均短于CT组,差异均有统计学意义(P﹤0.05)。术后7天,两组患者左心室射血分数(LVEF)、每搏量(SV)、用力肺活量(FVC)均较术前降低,但ENB组患者LVEF、SV、FVC均高于CT组,差异均有统计学意义(P﹤0.05)。术后1天,两组患者白细胞介素-6(IL-6)、白细胞介素-8(IL-8)、C反应蛋白(CRP)、皮质醇(Cor)水平均较术前升高,但ENB组患者IL-6、IL-8、CRP、Cor水平均低于CT组,差异均有统计学意义(P﹤0.05)。两组患者并发症总发生率比较,差异无统计学意义(P﹥0.05)。结论相比于CT引导下Hook-wire穿刺定位,ENB引导下肺结节定位的定位时间和定位后等待时间更短,能够更加有效地改善患者的心肺功能,减轻应激反应。 展开更多
关键词 电磁导航支气管镜引导下肺结节定位 CT引导下Hook-wire穿刺定位 肺癌根治术 定位时间
下载PDF
The skeleton of 5,7-fused bicyclic imidazole-diazepine for heat-resistant energetic materials
5
作者 Xiaoxiao Zheng Yubing Xue +2 位作者 Changhao Dai Hongwei Yang Guangbin Cheng 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2023年第9期193-199,共7页
In light of the low yields and complex reaction routes of some well-known 5,5-fused and 5,6-fused bicyclic compounds,a series of 5,7-fused bicyclic imidazole-diazepine compounds were developed with high yields by only... In light of the low yields and complex reaction routes of some well-known 5,5-fused and 5,6-fused bicyclic compounds,a series of 5,7-fused bicyclic imidazole-diazepine compounds were developed with high yields by only two efficient steps.Significantly,the seven-membered heterocyclic ring has a stable energetic skeleton with multiple modifiable sites.However,the 5,7-fused bicyclic energetic compounds were rarely reported in the area of energetic materials.Three neutral compounds 1,2 and 4 were synthesized in this work.To improve the detonation performances of the 5,7-fused neutral compounds,corresponding perchlorate 1a and 2a were further developed.The physicochemical and energetic performances of all newly developed compounds were experimentally determined.All newly prepared energetic compounds exhibit high decomposition temperatures(Td:243.8-336℃)and low mechanical sensitivities(IS:>15 J,FS:>280 N).Among them,the velocities performances of 1a(Dv=7651 m/s)and 4(Dv=7600 m/s)are comparable to that of typical heat-resistant energetic material HNS(Dv=7612 m/s).Meanwhile,the high decomposition temperature and low mechanical sensitivities(Td=336℃;IS=32 J;FS>353 N)of 4 are superior to that of HNS(Td=318℃;IS=5 J;FS=250 N).Hence,the 5,7-fused bicyclic compounds with high thermostability,low sensitivities and adjustable detonation performance have a clear tendency to open up a new space for the development of heat-resistant energetic materials. 展开更多
关键词 Imidazole-diazepine heat-resistant material 5 7-Fused skeleton Energetic materials
下载PDF
Microstructure and mechanical properties of a cast heat-resistant rare-earth magnesium alloy
6
作者 Xiao-ping Zhu Jun-qing Yao +6 位作者 Hai-long Wu Xin-wang Liu Hua Liu Zi-tian Fan Shu-lin Lü Kai Wang Zi-dong Wang 《China Foundry》 SCIE CAS CSCD 2023年第4期289-298,共10页
Microstructure,mechanical properties and phase transformation of a heat-resistant rare-earth(RE)Mg-16.1Gd-3.5Nd-0.38Zn-0.26Zr-0.15Y(wt.%)alloy were investigated.The as-cast alloy is composed of equiaxedα-Mg matrix,ne... Microstructure,mechanical properties and phase transformation of a heat-resistant rare-earth(RE)Mg-16.1Gd-3.5Nd-0.38Zn-0.26Zr-0.15Y(wt.%)alloy were investigated.The as-cast alloy is composed of equiaxedα-Mg matrix,net-shaped Mg5RE and Zr-rich phases.According to aging hardening curves and tensile properties variation,the optimized condition of solution treatment at 520℃for 8 h and subsequent aging at 204℃for 12 h was selected.The continuous secondary Mg5RE phase predominantly formed at grain boundaries during solidification transforms to residual discontinuousβ-Mg5RE phase and fine cuboid REH2particles after heat treatment.The annealed alloy exhibits good comprehensive tensile property at 350℃,with ultimate tensile strength of 153 MPa and elongation to fracture of 6.9%.Segregation of RE elements and eventually RE-rich precipitation at grain boundaries are responsible for the high strength at elevated temperature. 展开更多
关键词 heat-resistant magnesium alloy rare earth microstructure phase transformation tensile property strengthening
下载PDF
Expert Experience and Data-Driven Based Hybrid Fault Diagnosis for High-SpeedWire Rod Finishing Mills 被引量:1
7
作者 Cunsong Wang Ningze Tang +3 位作者 Quanling Zhang Lixin Gao Haichen Yin Hao Peng 《Computer Modeling in Engineering & Sciences》 SCIE EI 2024年第2期1827-1847,共21页
The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault lo... The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system. 展开更多
关键词 High-speed wire rod finishing mills expert experience DATA-DRIVEN fault diagnosis
下载PDF
High formability Mg-Zn-Gd wire facilitates ACL reconstruction via its swift degradation to accelerate intra-tunnel endochondral ossification
8
作者 Xuan He Ye Li +14 位作者 Hongwei Miao Jiankun Xu Michael Tim-yun Ong Chenmin Wang Lizhen Zheng Jiali Wang Le Huang Haiyue Zu Zhi Yao Jie Mi Bingyang Dai Xu Li Patrick Shu-hang Yung Guangyin Yuan Ling Qin 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第1期295-315,共21页
After reconstructing the anterior cruciate ligament(ACL),unsatisfactory bone tendon interface healing may often induce tunnel enlargement at the early healing stage.With good biological features and high formability,M... After reconstructing the anterior cruciate ligament(ACL),unsatisfactory bone tendon interface healing may often induce tunnel enlargement at the early healing stage.With good biological features and high formability,Magnesium-Zinc-Gadolinium(ZG21)wires are developed to bunch the tendon graft for matching the bone tunnel during transplantation.Microstructure,tensile strength,degradation,and cytotoxicity of ZG21 wire are evaluated.The rabbit model is used for assessing the biological effects of ZG21 wire by Micro-CT,histology,and mechanical test.The SEM/EDS,immunochemistry,and in vitro assessments are performed to investigate the underlying mechanism.Material tests demonstrate the high formability of ZG21 wire as surgical suture.Micro-CT shows ZG21 wire degradation accelerates tunnel bone formation,and histologically with earlier and more fibrocartilage regeneration at the healing interface.The mechanical test shows higher ultimate load in the ZG21 group.The SEM/EDS presents ZG21 wire degradation triggered calcium phosphate(Ca-P)deposition.IHC results demonstrate upregulation of Wnt3a,BMP2,and VEGF at the early phase and TGFβ3 and Type II collagen at the late phase of healing.In vitro tests also confirmed the Ca-P in the metal extract could elevate the expression of Wnt3a,βcatenin,ocn and opn to stimulate osteogenesis.Ex vivo tests of clinical samples indicated suturing with ZG21 wire did not weaken the ultimate loading of human tendon tissue.In conclusion,the ZG21 wire is feasible for tendon graft bunching.Its degradation products accelerated intra-tunnel endochondral ossification at the early healing stage and therefore enhanced bone-tendon interface healing in ACL reconstruction. 展开更多
关键词 Magnesium wire ACL reconstruction Magnesium alloy BIOMATERIALS Endochondral ossification
下载PDF
3D reconstruction and defect pattern recognition of bonding wire based on stereo vision
9
作者 Naigong Yu Hongzheng Li +2 位作者 Qiao Xu Ouattara Sie Essaf Firdaous 《CAAI Transactions on Intelligence Technology》 SCIE EI 2024年第2期348-364,共17页
Non-destructive detection of wire bonding defects in integrated circuits(IC)is critical for ensuring product quality after packaging.Image-processing-based methods do not provide a detailed evaluation of the three-dim... Non-destructive detection of wire bonding defects in integrated circuits(IC)is critical for ensuring product quality after packaging.Image-processing-based methods do not provide a detailed evaluation of the three-dimensional defects of the bonding wire.Therefore,a method of 3D reconstruction and pattern recognition of wire defects based on stereo vision,which can achieve non-destructive detection of bonding wire defects is proposed.The contour features of bonding wires and other electronic components in the depth image is analysed to complete the 3D reconstruction of the bonding wires.Especially to filter the noisy point cloud and obtain an accurate point cloud of the bonding wire surface,a point cloud segmentation method based on spatial surface feature detection(SFD)was proposed.SFD can extract more distinct features from the bonding wire surface during the point cloud segmentation process.Furthermore,in the defect detection process,a directional discretisation descriptor with multiple local normal vectors is designed for defect pattern recognition of bonding wires.The descriptor combines local and global features of wire and can describe the spatial variation trends and structural features of wires.The experimental results show that the method can complete the 3D reconstruction and defect pattern recognition of bonding wires,and the average accuracy of defect recognition is 96.47%,which meets the production requirements of bonding wire defect detection. 展开更多
关键词 bonding wire defect detection point cloud point cloud segmentation
下载PDF
Effect of wire diameter compression ratio on drawing deformation of micro copper wire
10
作者 Tao HUANG Han-jiang WU +3 位作者 Ke-xing SONG Yan-min ZHANG Yan-jun ZHOU Shao-lin LI 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第8期2605-2618,共14页
A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micr... A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process. 展开更多
关键词 micro copper wire drawing deformation crystal plasticity finite element slip mode
下载PDF
Capillary Property of Entangled Porous Metallic Wire materials and Its Application in Fluid Buffers:Theoretical Analysis and Experimental Study
11
作者 Yu Tang Yiwan Wu +1 位作者 Hu Cheng Rong Liu 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第1期400-416,共17页
Strong impact does serious harm to the military industries so it is necessary to choose reasonable cushioning material and design effective buffers to prevent the impact of equipment.Based on the capillary property en... Strong impact does serious harm to the military industries so it is necessary to choose reasonable cushioning material and design effective buffers to prevent the impact of equipment.Based on the capillary property entangled porous metallic wire materials(EPMWM),this paper designed a composite buffer which uses EPMWM and viscous fluid as cushioning materials under the low-speed impact of the recoil force device of weapon equipment(such as artillery,mortar,etc.).Combined with the capillary model,porosity,hydraulic diameter,maximum pore diameter and pore distribution were used to characterize the pore structure characteristics of EPMWM.The calculation model of the damping force of the composite buffer was established.The low-speed impact test of the composite buffer was conducted.The parameters of the buffer under low-speed impact were identified according to the model,and the nonlinear model of damping force was obtained.The test results show that the composite buffer with EPMWM and viscous fluid can absorb the impact energy from the recoil movement effectively,and provide a new method for the buffer design of weapon equipment(such as artillery,mortar,etc.). 展开更多
关键词 Entangled porous metallic wire materials Capillary property Viscousfluid Low-speed impact Damping force
下载PDF
Modeling asymmetric fracture mechanics of Mg alloy wire in drawing process
12
作者 Sunghoon Choi Jongwon Shin +1 位作者 Joung Sik Suh Dongchoul Kim 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第5期2057-2069,共13页
In this study,a numerical analysis was conducted on the ductile fracture of a 2-mm diameter Mg-1Zn-0.5Mn-0.5Sr-0.1Ca alloy wire during drawing.The hexagonally close-packed crystal structure of Mg alloys causes asymmet... In this study,a numerical analysis was conducted on the ductile fracture of a 2-mm diameter Mg-1Zn-0.5Mn-0.5Sr-0.1Ca alloy wire during drawing.The hexagonally close-packed crystal structure of Mg alloys causes asymmetric fracture behavior,especially in the compression region.The aim of this study is to develop a comprehensive damage model for Mg alloy wire that accurately predicts ductile fracture,with a focus on the compression region.A novel experimental method was introduced to measure the ductile fracture of Mg alloy wires under different stress states.The wire drawing process was simulated using the Generalized Incremental Stress-State dependent damage(GISSMO)Model and the Semi-Analytical Model for Polymers(SAMP)model.The damage model's prediction and the experimental results were found to be in excellent agreement,especially in determining crack initiation.Computational analysis established a safe zone diagram for die angle and reduction ratio,and experimental validation confirmed the feasibility of this approach.The proposed damage model can provide a practical and reliable analysis for optimizing the drawing process of Mg alloy wire. 展开更多
关键词 Mg alloy wire drawing Finite element method Damage model Safe zone diagram
下载PDF
Mechanical property of cylindrical sandwich shell with gradient core of entangled wire mesh
13
作者 Xin Xue Chao Zheng +1 位作者 Fu-qiang Lai Xue-qian Wu 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第1期510-522,共13页
To explore the wide-frequency damping and vibration-attenuation performances in the application of aerospace components,the cylindrical sandwich shell structure with a gradient core of entangled wire mesh was proposed... To explore the wide-frequency damping and vibration-attenuation performances in the application of aerospace components,the cylindrical sandwich shell structure with a gradient core of entangled wire mesh was proposed in this paper.Firstly,the gradient cores of entangled wire mesh in the axial and radial directions were prepared by using an in-house Numerical Control weaving machine,and the metallurgical connection between skin sheets and the gradient core was performed using vacuum brazing.Secondly,to investigate the mechanical properties of cylindrical sandwich shells with axial or radial gradient cores,quasi-static and dynamic mechanical experiments were carried out.The primary evaluations of mechanical properties include secant stiffness,natural frequency,Specific Energy Absorption(SEA),vibration acceleration level,and so on.The results suggest that the vibration-attenuation performance of the sandwich shell is remarkable when the high-density core layer is at the end of the shell or abuts the inner skin.The axial gradient material has almost no influence on the vibration frequencies of the shell,whereas the vibration frequencies increase dramatically when the high-density core layer approaches the skin.Moreover,compared to the conventional sandwich shells,the proposed functional grading cylindrical sandwich shell exhibits more potential in mass reduction,stiffness designing,and energy dissipation. 展开更多
关键词 Entangled wire mesh Gradient cylindrical sandwich shell Vacuum brazing Secant stiffness Damping
下载PDF
Mass transfer enhancement and hydrodynamic performance with wire mesh coupling solid particles in bubble column reactor
14
作者 Chuanjun Di Jipeng Dong +3 位作者 Fei Gao Guanghui Chen Pan Zhang Jianlong Li 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2024年第3期195-205,共11页
It is of vital significance to investigate mass transfer enhancements for chemical engineering processes.This work focuses on investigating the coupling influence of embedding wire mesh and adding solid particles on b... It is of vital significance to investigate mass transfer enhancements for chemical engineering processes.This work focuses on investigating the coupling influence of embedding wire mesh and adding solid particles on bubble motion and gas-liquid mass transfer process in a bubble column.Particle image velocimetry(PIV)technology was employed to analyze the flow field and bubble motion behavior,and dynamic oxygen absorption technology was used to measure the gas-liquid volumetric mass transfer coefficient(kLa).The effect of embedding wire mesh,adding solid particles,and wire mesh coupling solid particles on the flow characteristic and kLa were analyzed and compared.The results show that the gas-liquid interface area increases by 33%-72%when using the wire mesh coupling solid particles strategy compared to the gas-liquid two-phase flow,which is superior to the other two strengthening methods.Compared with the system without reinforcement,kLa in the bubble column increased by 0.5-1.8 times with wire mesh coupling solid particles method,which is higher than the sum of kLa increases with inserting wire mesh and adding particles,and the coupling reinforcement mechanism for affecting gas-liquid mass transfer process was discussed to provide a new idea for enhancing gas-liquid mass transfer. 展开更多
关键词 Fluid mechanics BUBBLE Mass transfer wire mesh coupling solid particles Particle image velocimetry Hydrodynamics
下载PDF
In vivo and in vitro study of resorbable magnesium wires for medical implants:Mg purity,surface quality,Zn alloying and polymer coating
15
作者 K.Tesar J.Luňácková +12 位作者 M.Jex M.Žaloudková R.Vrbová M.Bartoš P.Klein L.Vištejnová J.Dušková E.Filová Z.Sucharda M.Steinerová S.Habr K.Balík A.Singh 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第6期2472-2488,共17页
Magnesium is an excellent material in terms of biocompatibility and its corrosion products can serve as an active source for new bone formation.However,localized corrosion and H_(2)generation limit the potential of Mg... Magnesium is an excellent material in terms of biocompatibility and its corrosion products can serve as an active source for new bone formation.However,localized corrosion and H_(2)generation limit the potential of Mg-based implants.Utilizing low-alloyed Mg-Zn wires can strongly reduce problems with large H_(2)bubbles and improve the mechanical properties considerably while maintaining excellent long-term biocompatibility.Acidic pickling and a polymer coating can be effectively used to lower the rate of in vivo degradation.In this work,microstructural,mechanical,and in vitro characterization of 250μm and 300μm extruded wires made from ultra-pure Mg,commercially pure Mg,Mg-0.15Zn,Mg-0.4Zn and Mg-1Zn was performed.Additionally,Mg-0.4Zn wires together with a variant coated with a copolymer of L-lactide andε-caprolactone were tested in vivo on artificially damaged Wistar rat femurs.Based on the observed Mg-induced osteogenesis,polymer-coated Mg wires with a small addition of Zn are a perspective material for bone-support applications,such as cerclage and fixation wires. 展开更多
关键词 MAGNESIUM Resorbable Mg wire Mg-Zn implant degradation Biocompatibility study Zn grain boundary segregation
下载PDF
Selective Technology Importation and the Convergence in the Late Qing Dynasty: Evidence from Wired Telegraph
16
作者 Jiao Yinyi Cai Meng 《China Economist》 2024年第5期117-136,共20页
Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbre... Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbreak of the War of Resistance Against Japanese Aggression(1931-1945),thus testing Baldwin’s theory of“the Great Convergence”in which developing countries are empowered by information and communication technologies.Based on panel data of 1858-1937,we found that wired telegraph access had a significantly positive effect,as well as a long-term growth effect,on the entry of industrial enterprises.Our mechanism analysis indicates that wired telegraph access accelerated early-stage industrialization in localities by encouraging market integration,human capital accumulation,and auxiliary commercial organizations.Only a few countries firmly asserted their telegraph sovereignty and set up their own workforce educational system during telegraph adoption.This explains why the Great Convergence arising from technology importation only occurred in a small number of countries.Our findings contribute to understanding the source of China’s modern industrial progress,as well as why global inequities remain. 展开更多
关键词 wired telegraph entry of industrial enterprises the Great Convergence human capital
下载PDF
Enhancing fatigue performance of AZ31 magnesium alloy components fabricated by cold metal transfer-based wire arc directed energy deposition through LPB
17
作者 Shambhu Kumar Manjhi Srikanth Bontha A.S.S.Balan 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第4期1638-1662,共25页
Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace industries.However,the susc... Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace industries.However,the susceptibility to fatigue of CMT-WA-DED-produced AZ31 Mg alloy components has impeded their widespread adoption for critical load-bearing applications.In this study,a comprehensive investigation into the fatigue behaviour of WA-DED-fabricated AZ31 Mg alloy has been carried out and compared to commercially available wrought AZ31 alloy.Our findings indicate that the as-deposited parts exhibit a lower fatigue life than wrought Mg alloy,primarily due to poor surface finish,tensile residual stress,porosity,and coarse grain microstructure inherent in the WA-DED process.Low Plasticity Burnishing(LPB)treatment is applied to mitigate these issues,which induce significant plastic deformation on the surface.This treatment resulted in a remarkable improvement of fatigue life by 42%,accompanied by a reduction in surface roughness,grain refinement and enhancement of compressive residual stress levels.Furthermore,during cyclic deformation,WA-DED specimens exhibited higher plasticity and dislocation density compared to both wrought and WA-DED+LPB specimens.A higher fraction of Low Angle Grain Boundaries(LAGBs)in WA-DED specimens contributed to multiple crack initiation sites and convoluted crack paths,ultimately leading to premature failure.In contrast,wrought and WA-DED+LPB specimens displayed a higher percentage of High Angle Grain Boundaries(HAGBs),which hindered dislocation movement and resulted in fewer crack initiation sites and less complex crack paths,thereby extending fatigue life.These findings underscore the effectiveness of LPB as a post-processing technique to enhance the fatigue performance of WA-DED-fabricated AZ31 Mg alloy components.Our study highlights the importance of LPB surface treatment on AZ31 Mg components produced by CMT-WA-DED to remove surface defects,enabling their widespread use in load-bearing applications. 展开更多
关键词 wire arc additive manufacturing AZ31 Mg alloy Low plasticity burnishing Low cycle fatigue test Strain amplitude
下载PDF
Utilizing Iso-Value Field Curves in Lieu of Magnetic Field Lines Amid Infinite and Parallel Electrical Wires
18
作者 Geoffroy Auvert 《Open Journal of Applied Sciences》 2024年第1期70-84,共15页
Building on a new model proposed recently for calculating constant electro-magnetic field values, the present article explores the electro-magnetic field configuration generated by parallel electrical wires. This impo... Building on a new model proposed recently for calculating constant electro-magnetic field values, the present article explores the electro-magnetic field configuration generated by parallel electrical wires. This imposes a reevaluation of the drawing procedure for constructing field curves with a constant field values around multiple parallel electrical conducting wires. To achieve this, we employ methods akin to those used for creating contours on topographical maps, ensuring a consistent numerical field value along the entire length of the field curves. Subsequent calculations will be conducted for scenarios where wires are not parallel. 展开更多
关键词 Specific Field Value Parallel Electrical wires Magnetic Field Vector Field around Parallel wires Topographic Level Map
下载PDF
Magnetic Field Curves and Magnetic Equipotential Surfaces around Crossing Electrical Wires Replacing Classical Magnetic Field Lines
19
作者 Geoffroy Auvert 《Open Journal of Applied Sciences》 2024年第8期1996-2008,共13页
This article is based on a recent model specifically defining magnetic field values around electrical wires. With this model, calculations of field around parallel wires were obtained. Now, this model is extended with... This article is based on a recent model specifically defining magnetic field values around electrical wires. With this model, calculations of field around parallel wires were obtained. Now, this model is extended with the new concept of magnetic equipotential surface to magnetic field curves around crossing wires. Cases of single, double, and triple wires are described. Subsequent article will be conducted for more general scenarios where wires are neither infinite nor parallel. 展开更多
关键词 Magnetic Field Value Magnetic Field Vector Magnetic Field Line Magnetic Field Curve Equipotential Surface Crossing Electrical wires Magnetic Cross Product
下载PDF
Design and Application of a Novel Wire Stripper
20
作者 Yuhan Gu 《Journal of Electronic Research and Application》 2024年第3期172-177,共6页
With the rapid development of the power industry,the work of the power electrician is becoming increasingly heavy,and the demand for improving work efficiency and reducing work intensity is becoming increasingly promi... With the rapid development of the power industry,the work of the power electrician is becoming increasingly heavy,and the demand for improving work efficiency and reducing work intensity is becoming increasingly prominent.As one of the common tools of electric power,the design and application of wire stripper has an important influence on the efficiency and safety of electric power.This paper briefly analyzes the design and application of ceramic wire for electric power and electricians to provide a reference for the development of related fields. 展开更多
关键词 Electric power and electrician wire stripper STRUCTURE DESIGN
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部