Operating Parameters of the District Heating Substation Cooperating With the Installation of Technological Air Conditioning With High Efficiency of Heat Recovery

The article analyses the problem of determining the operating parameters of the district heating substation cooperating with the air heating system in technological air conditioning systems equipped with heat exchangers with high efficiency of heat recovery.Attention was paid to the correct selection of heat exchangers for the heat output balance depending on the heat recovery protection algorithms against a drop in the temperature of the heat transfer surface below 0℃.Critical parameters were determined in Polish climatic conditions,at which the operation of the heat recovery exchanger in the air conditioning system is switched off or limited.It has been proven that the proper functioning of the district heating substation cooperating with the installation of air conditioning with high heat recovery efficiency requires the use of two heat exchangers with different characteristics,equipped with properly selected temperature control systems.The optimal model of cooperation between the technological air conditioning system and the heating substation was also indicated.

The potential mechanism and clinical application value of remote ischemic conditioning in stroke

Some studies have confirmed the neuroprotective effect of remote ischemic conditioning against stroke. Although numerous animal researches have shown that the neuroprotective effect of remote ischemic conditioning may be related to neuroinflammation, cellular immunity, apoptosis, and autophagy, the exact underlying molecular mechanisms are unclear. This review summarizes the current status of different types of remote ischemic conditioning methods in animal and clinical studies and analyzes their commonalities and differences in neuroprotective mechanisms and signaling pathways. Remote ischemic conditioning has emerged as a potential therapeutic approach for improving stroke-induced brain injury owing to its simplicity, non-invasiveness, safety, and patient tolerability. Different forms of remote ischemic conditioning exhibit distinct intervention patterns, timing, and application range. Mechanistically, remote ischemic conditioning can exert neuroprotective effects by activating the Notch1/phosphatidylinositol 3-kinase/Akt signaling pathway, improving cerebral perfusion, suppressing neuroinflammation, inhibiting cell apoptosis, activating autophagy, and promoting neural regeneration. While remote ischemic conditioning has shown potential in improving stroke outcomes, its full clinical translation has not yet been achieved.

Flow and Heat Transfer Features of Supercritical Pressure CO_(2) in Horizontal Flows under Whole-Wall Heating Conditions

Based on the first and second laws of thermodynamics,the heat transfer and flow(thermohydraulic)characteristics of horizontal supercritical pressure CO_(2)(S-CO_(2))in a circular pipe under heating conditions were investigated numerically.Heating flows in two different diameters(d)of 4 and 6 mm were simulated in pipes with pressures of 8 MPa,mass fluxes(G)of 300 and 400 kg/(m^(2)·s),and heat fluxes(q)of 50,75 and 100 kW/m^(2).In the d=4 mm pipe,the peak heat transfer coefficient(hb)was about 3 times higher than in the d=6 mm pipe,while the entropy production due to fluid friction in the 4 mm pipe was on average 1.1 times higher,and the entropy production due to heat transfer was on average about 67%lower.A 4 mm tube was employed to further evaluate the influence of the applied wall heat flux,the results demonstrated that the irreversibility due to heat transfer was on average more than 4 times higher when heat flux density was 100 kW/m^(2)than when the heat flux density was 50 kW/m^(2),while the peak of heat transfer coefficient increased by 1.4 times as q was decreased from 100 to 50 kW/m^(2).The effect of thermal acceleration was ignored,while the buoyancy effect resulted in secondary flow and significantly affected the flow and heat transfer features.The jet flows were found in the vicinity of the lower wall of the pipe,which made the two fields of velocity and temperature gradient more synergistic,leading to an enhancement in heat transfer in the vicinity of the upper wall.The aggravation of heat transfer resulted in high irreversibility of heat transfer in the cross-sectional area near the wall,while the local friction irreversibility was less affected by the buoyancy effect,and the distribution was uniform.The uneven distribution of thermophysical properties also confirmed that the enhanced heat transfer occurred near the wall area at the bottom of the pipe.

The Mechanism of Heating Rate on the Secondary Recrystallization Evolution in Grain Oriented Silicon Steel

Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.

Actuator fault diagnosis and severity identification of turbofan engines for steady-state and dynamic conditions

Actuator faults can be critical in turbofan engines as they can lead to stall,surge,loss of thrust and failure of speed control.Thus,fault diagnosis of gas turbine actuators has attracted considerable attention,from both academia and industry.However,the extensive literature that exists on this topic does not address identifying the severity of actuator faults and focuses mainly on actuator fault detection and isolation.In addition,previous studies of actuator fault identification have not dealt with multiple concurrent faults in real time,especially when these are accompanied by sudden failures under dynamic conditions.This study develops component-level models for fault identification in four typical actuators used in high-bypass ratio turbofan engines under both dynamic and steady-state conditions and these are then integrated with the engine performance model developed by the authors.The research results reported here present a novel method of quantifying actuator faults using dynamic effect compensation.The maximum error for each actuator is less than0.06%and 0.07%,with average computational time of less than 0.0058 s and 0.0086 s for steady-state and transient cases,respectively.These results confirm that the proposed method can accurately and efficiently identify concurrent actuator fault for an engine operating under either transient or steady-state conditions,even in the case of a sudden malfunction.The research results emonstrate the potential benefit to emergency response capabilities by introducing this method of monitoring the health of aero engines.

FedCLCC:A personalized federated learning algorithm for edge cloud collaboration based on contrastive learning and conditional computing

Federated learning(FL)is a distributed machine learning paradigm for edge cloud computing.FL can facilitate data-driven decision-making in tactical scenarios,effectively addressing both data volume and infrastructure challenges in edge environments.However,the diversity of clients in edge cloud computing presents significant challenges for FL.Personalized federated learning(pFL)received considerable attention in recent years.One example of pFL involves exploiting the global and local information in the local model.Current pFL algorithms experience limitations such as slow convergence speed,catastrophic forgetting,and poor performance in complex tasks,which still have significant shortcomings compared to the centralized learning.To achieve high pFL performance,we propose FedCLCC:Federated Contrastive Learning and Conditional Computing.The core of FedCLCC is the use of contrastive learning and conditional computing.Contrastive learning determines the feature representation similarity to adjust the local model.Conditional computing separates the global and local information and feeds it to their corresponding heads for global and local handling.Our comprehensive experiments demonstrate that FedCLCC outperforms other state-of-the-art FL algorithms.

Mach reflection and pressure/heating loads on V-shaped blunt leading edges with variable cross-sections and crotches

The primary Mach Reflection(MR)and pressure/heating loads on V-shaped Blunt Leading Edges(VBLEs)with variable elliptic cross-sections and conic crotches are theoretically investigated in this study.The simplified continuity method is used to forecast the shock configurations.The theoretical predictions and the numerical simulations for the Mach stem and the triple point as well as the curved shock accord well.Based on the theoretical model,an analysis of the impact of the axial ratio a/b of the cross-sectional shape and the eccentricity e of the crotch sweep path on shock structures is carried out.The shock configurations obtained from the theoretical model enable the derivation of the transition boundaries between the primary MR and the same family Regular Reflection(sRR).It is found that the increase of a/b and e can both facilitate the primary MR to sRR transition.The resulting transition and the corresponding generation of the wall pressure and heat flux are then investigated.The results indicate that higher values of the ratio a/b can significantly reduce the wall pressure and heating loads by inducing the primary MR to sRR transition.Conversely,the increase in the eccentricity e results in increased loads,despite causing the same transition.

Riemann-Hilbert Problem and Multiple High-order Poles Solutions of the Focusing mKdV Equation with Nonzero Boundary Conditions

The focusing modified Korteweg-de Vries(mKdV)equation with multiple high-order poles under the nonzero boundary conditions is first investigated via developing a Riemann-Hilbert(RH)approach.We begin with the asymptotic property,symmetry and analyticity of the Jost solutions,and successfully construct the RH problem of the focusing mKdV equation.We solve the RH problem when 1/S_(11)(k)has a single highorder pole and multiple high-order poles.Furthermore,we derive the soliton solutions of the focusing mKdV equation which corresponding with a single high-order pole and multiple high-order poles,respectively.Finally,the dynamics of one-and two-soliton solutions are graphically discussed.

Construction and realization of the knowledge base and inference engine of an IDSS model for air-conditioning cooling/heating sources selection

The knowledge representation mode and inference control strategy were analyzed according to the specialties of air-conditioning cooling/heating sources selection. The constructing idea and working procedure for knowledge base and inference engine were proposed while the realization technique of the C language was discussed. An intelligent decision support system (IDSS) model based on such knowledge representation and inference mechanism was developed by domain engineers. The model was verified to have a small kernel and powerful capability in list processing and data driving, which was successfully used in the design of a cooling/heating sources system for a large-sized office building.

Role of Heating Condition in Polyethylene Behaviors under Nitrogen and Air Atmosphere

Recycle of plastic waste is an indisputable means to alleviate both environment and energy crisis.In this work,effects of heating condition on polyethylene behaviors in nitrogen and air were studied.It was observed that polyethylene behavior was a single step in nitrogen,while the multiple steps occurred in air.According to the weight loss and heat flow curves,polyethylene behaviors in air were divided into three regions:low-temperature(<340 ℃),middle-temperature(340 – 380 ℃) and high-temperature(> 380 ℃) regions.Kinetic analysis revealed that the partial oxidization took the dominance in the low-temperature region,which seldom formed CO and CO_(2);the combustion took the dominance in the middle-temperature region,which was positive to the formation of CO and CO_(2);the pyrolysis was initiated and enhanced in the high-temperature region,which inhibited the formation of CO and CO;.According to the kinetic simulation,a synergistic effect between the pyrolysis and combustion was proposed to account for the acceleration of polyethylene conversion.This work may provide useful information about polyethylene behaviors under heating condition,and help to design and optimize plastic waste incineration process.

Peristaltic flow in an asymmetric channel with convective boundary conditions and Joule heating

The peristaltic transport of viscous fluid in an asymmetric channel is concentrated. The channel walls exhibit convective boundary conditions. Both cases of hydrodynamic and magnetohydrodynamic(MHD) fluids are considered. Mathematical analysis has been presented in a wave frame of reference. The resulting problems are non-dimensionalized. Long wavelength and low Reynolds number approximations are employed. Joule heating effect on the thermal equation is retained. Analytic solutions for stream function and temperature are constructed. Numerical integration is carried out for pressure rise per wavelength. Effects of influential flow parameters have been pointed out through graphs.

Ultrafast synthetic strategies under extreme heating conditions toward single-atom catalysts

Dispersing atomic metals on substrates provides an ideal method to maximize metal utilization efficiency, which is important for the production of cost-effective catalysts and the atomic-level control of the electronic structure. However, due to the high surface energy, individual single atoms tend to migrate and aggregate into nanoparticles during preparation and catalytic operation. In the past few years, various synthetic strategies based on ultrafast thermal activation toward the effective preparation of single-atom catalysts(SACs) have emerged, which could effectively solve the aggregation issue. Here, we highlight and summarize the latest developments in various ultrafast synthetic strategy with rapid energy input by heating shockwave and instant quenching for the synthesis of SACs, including Joule heating, microwave heating, solid-phase laser irradiation, flame-assisted method, arc-discharge method and so on,with special emphasis on how to achieve the uniform dispersion of single metal atoms at high metal loadings as well as the suitability for scalable production. Finally, we point out the advantages and disadvantages of the ultrafast heating strategies as well as the trends and challenges of future developments.

Measurements of Hydrate Equilibrium Conditions for CH4, CO2, and CH4＋C2H6＋C3H8 in Various Systems by Step-heating Method

Phase equilibrium conditions of gas hydrate in several systems were measured by the step-heating method using the cylindrical transparent sapphire cell device.The experimental data for pure CH4 or CO2+deionized water systems showed good agreement with those in the literatures.This kind of method was then applied to CH4/CO2+sodium dodecyl sulfate(SDS)aqueous solution,CH4/CO2+SDS aqueous solution+silica sand,and(CH4+C2H6+C3H8)gas mixture+SDS aqueous solution systems,where SDS was added to increase the hydrate formation rate without evident influence on the equilibrium conditions.The feasibility and reliability of the step-heating method,especially for porous media systems and gas mixtures systems were determined.The experimental data for CO2+silica sand data shows that the equilibrium pressure will change significantly when the particle size of silica sand is less than 96μm.The formation equilibrium pressure was also measured by the reformation of hydrate.

Energy Efficient Air Conditioning System Using Geothermal Cooling-Solar Heating in Gujarat, India

It is well known that one unit of electrical energy saved is equal to more than two units produced. One way of economizing the power is utilization of energy efficient systems at all locations. In the present study, the air conditioning system is analysed and an innovative way is suggested. We use natural low temperature of shallow sub surface (1 - 3 m) of the earth—geothermal cooling system. It is known that majority of the households and the apartment complexes in India have two tanks for water storage. One is the underground water sump and the other is the overhead water tank. In our study, we use these two water storage systems for space cooling during summer and also for heating during winter. The main aim of our paper is air-conditioning of the space in an economic way to save electricity. It is based on a simple idea of transferring the low temperature from underground water sump to the room in the house using water as a mode of transport. Since India is a tropical country located at low latitude, most of the year, the air temperature is high and demands space cooling. However, for a couple of months during severe winter months (Dec.-Jan.) at Ahmedabad, heating of the space is required. For heating the space, we suggest to use the well-known solar water heater. Effective use of heat exchanger is shown through computation, modelling schemes and lab experiment. We recommend geothermal cooling for 10 months in a year and solar hot water system during 2 months of winter. It is observed that the ambient air temperature of 35°C - 40°C in the room can be brought down to 26°C without much consumption of electricity. In a similar manner, the room temperature at night (13°C) during winter in Ahmedabad can be increased to 27°C through circulation of water from solar water heater in the heat exchanger.

Heat Transfer Characteristics of Boiler Convective Heating Surface Under Pressurized Oxygen-fuel Combustion Conditions

增压富氧燃烧是一项极具前景的减排CO2新技术。对增压富氧燃烧条件下,对流受热面换热特性进行研究具有重要的意义。该文以一台实际300MW等级机组煤粉锅炉为计算对象,采用维里方程及Chun等的计算方法计算确定增压富氧燃烧烟气物性,采用宽带关联k模型计算富氧燃烧烟气辐射特性。进行了常规空气燃烧以及φ（O2）：φ（CO2）=21：79、φ（O2）：φ（CO2）=30：70两种比例的0.1、0.5、1.0、1.5、6 MPa五种压力下增压富氧燃烧各对流受热面的热力计算,分析了增压富氧燃烧条件烟气压力变化对各受热面换热特性的影响。研究结果表明：随烟气压力的升高,烟气流速下降,但烟气的Re却基本保持不变,对流换热系数有所增加。增压富氧燃烧烟气的辐射换热系数比空气燃烧烟气辐射换热系数大。实现同样的换热量,增压富氧燃烧条件下（φ（O2）：φ（CO2）=21：79、φ（O2）：φ（CO2）=30：70）对流受热面所需换热面积比常规空气燃烧条件下少。

Dynamic heating and thermal destruction conditions of quartz particles in polydisperse plasma flow of RF-ICP torch system

Numerical simulation of turbulent mixing process of polydisperse quartz particle(particle size distribution in the range of 0.1-0.4 mm)flow with Ar and Ar-H2 plasma generated by radio frequency inductively coupled plasma(RF-ICP)torch has been made.An approximate two-stage approach has been proposed to calculate the spatial-temporal distributions of temperature and resulting thermal stress in quartz particles during dynamic heating in polydisperse plasma flow.The influence of working gas compositions,particle size distributions,injection angle and flow rate of carrier gas on the thermal destruction conditions of quartz particles has been determined under different particle feed rates.It is found that all the solid quartz particles(0.1-0.4 mm)could be thermal destructed without overheating in RF-ICP torch system,when the hydrogen volume fraction in working gases is more than 1.5%-2%and particle feed rate is in a certain range.The values of the maximum and minimum feed rates have been determined under different hydrogen volume fractions.An optimal particle injection angle and flow rate of carrier gas is found around 50°-60°and 160-220 slpm,under which the value of maximum equivalent thermal stress in quartz particles is highest.

Impact of direct and indirect heating systems in broiler units on environmental conditions and flock performance

This study compared the impact of three indirect heating systems to direct gas flame heaters on a selection of flock performance and environmental indicators in commercial broiler units. No statistically significant differences（P≥0.05） were found in flock mortality rates, bird weight, water consumption, stress response, carbon dioxide, ammonia, temperature, relative humidity, litter quality, within-flock Campylobacter levels or mean Campylobacter counts when flock data from any of the three indirect heating systems were compared to flocks reared in houses with direct heating systems. Differences in litter quality were observed between upper and lower litter layers in all houses, regardless of heating type, which may have implications for bird health and welfare. Carbon dioxide concentrations in houses with direct heating systems were significantly higher than those in houses with indirect heating systems during the first 10 days of bird life（P≤0.05）. This was due to the increased use of heating systems during this period of the flock cycle. Differences in CO2 concentrations had no effect on flock performance, possibly due to the fact that concentrations did not exceed known safe levels. A statistically significant increase in stress response was observed in birds as a result of partial depopulation（thinning） within houses, irrespective of heating system type used（P≤0.05）. Stress associated with thinning may have consequences for bird welfare and food safety. In conclusion, the results of our study suggest that indirect heating systems do not appear to negatively impact on flock performance, stress response, within-flock Campylobacter levels or mean Campylobacter counts and do not appear to significantly alter environmental conditions within broiler houses when compared to houses equipped with direct heating systems. Indirect systems are a viable alternative for heating broiler houses in terms of flock performance, bird welfare and food safety.

Successional conditions of Dolichospermum and Microcystis in Taihu Lake,China

Dolichospermum spp.and Microcystis spp.are two common cyanobacteria that form blooms in the Changjiang(Yangtze)River basin,but the environmental conditions for their succession in large lakes are still unclear.Based on daily monitoring data from Meiliang Bay in Taihu Lake from March to June,2016-2018,we studied the environmental conditions necessary for the succession of these two cyanobacteria.Results show that from March to June,the dominant genera of cyanobacteria experienced succession and co-dominated with Microcystis.The succession process included three stages.In StageⅠ,the biomass of Dolichospermum and Microcystis was similar(March),but Dolichospermum was dominant for most of the period.In StageⅡ,dominance alternated between Dolichospermum and Microcystis(April to mid-May).In StageⅢ,the biomass of Microcystis dominated(mid-May to June).In addition,temperature and nutrients across the three stages varied significantly.The average temperature increased continuously from 10.9 to 18.4,and to 24.2℃.The total nitrogen content decreased from 2.87 to 2.40,and to 1.86 mg/L.The total phosphorus content increased from 0.08 to 0.09,and to 0.12 mg/L.Correlation analysis revealed that Microcystis biomass was positively correlated with temperature and total phosphorus.Dolichospermum biomass was positively correlated with total nitrogen.Classification and regression tree displays that when the temperature was below 18.1℃,Dolichospermum dominated;above 18.1℃,Microcystis took over.Further analysis revealed that when temperature reached 18℃,the biomass of Microcystis increased exponentially,and the biomass of Dolichospermum exhibited a Gaussian distribution trend.This finding indicated that temperature was the key factor in the succession of Dolichospermum and Microcystis in nutrient-rich shallow lakes.As nitrogen and phosphorus concentrations decrease,the dominant species of cyanobacteria will diversify its development.The results of this study provide a foundation for risk prediction and control strategies for cyanobacterial blooms in lakes and reservoirs.

Conditioned medium from human dental pulp stem cells treats spinal cord injury by inhibiting microglial pyroptosis

Human dental pulp stem cell transplantation has been shown to be an effective therapeutic strategy for spinal cord injury.However,whether the human dental pulp stem cell secretome can contribute to functional recovery after spinal cord injury remains unclear.In the present study,we established a rat model of spinal cord injury based on impact injury from a dropped weight and then intraperitoneally injected the rats with conditioned medium from human dental pulp stem cells.We found that the conditioned medium effectively promoted the recovery of sensory and motor functions in rats with spinal cord injury,decreased expression of the microglial pyroptosis markers NLRP3,GSDMD,caspase-1,and interleukin-1β,promoted axonal and myelin regeneration,and inhibited the formation of glial scars.In addition,in a lipopolysaccharide-induced BV2 microglia model,conditioned medium from human dental pulp stem cells protected cells from pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway.These results indicate that conditioned medium from human dental pulp stem cells can reduce microglial pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway,thereby promoting the recovery of neurological function after spinal cord injury.Therefore,conditioned medium from human dental pulp stem cells may become an alternative therapy for spinal cord injury.

Personal Thermal Management by Radiative Cooling and Heating

Maintaining thermal comfort within the human body is crucial for optimal health and overall well-being.By merely broadening the setpoint of indoor temperatures,we could significantly slash energy usage in building heating,ventilation,and air-conditioning systems.In recent years,there has been a surge in advancements in personal thermal management(PTM),aiming to regulate heat and moisture transfer within our immediate surroundings,clothing,and skin.The advent of PTM is driven by the rapid development in nano/micro-materials and energy science and engineering.An emerging research area in PTM is personal radiative thermal management(PRTM),which demonstrates immense potential with its high radiative heat transfer efficiency and ease of regulation.However,it is less taken into account in traditional textiles,and there currently lies a gap in our knowledge and understanding of PRTM.In this review,we aim to present a thorough analysis of advanced textile materials and technologies for PRTM.Specifically,we will introduce and discuss the underlying radiation heat transfer mechanisms,fabrication methods of textiles,and various indoor/outdoor applications in light of their different regulation functionalities,including radiative cooling,radiative heating,and dual-mode thermoregulation.Furthermore,we will shine a light on the current hurdles,propose potential strategies,and delve into future technology trends for PRTM with an emphasis on functionalities and applications.