Preparation technology and anti-corrosion performances of black ceramic coatings formed by micro-arc oxidation on aluminum alloys

In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.

Investigation of anti-corrosion property of hybrid coatings fabricated by combining PEC with MAO on pure magnesium

Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron microscopy(SEM)was used to observe the microstructure of the coatings,meanwhile,energy dispersive spectrometry(EDS)and X-ray diffraction(XRD)were separately used to investigate the elemental as well as phase compositions of the coatings.The anti-corrosion property of the coatings was evaluated by potentiodynamic polarization curves as well as electrochemical impedance spectroscopy(EIS).The results show that PEC process is closely related with the effects of adsorption as well as diffusion of the activated carbon atoms,and it can provide a favorable pretreatment surface with predesigned chemical composition to obtain a new kind of phase,namely Si C with superior corrosion resistance and chemical stability,in the following PEC+MAO hybrid coatings.Meanwhile,PEC preprocessing also can afford an excellent micro-structure to increase the coating thickness as well as to improve the compactness of the PEC+MAO hybrid coatings.During the fabrication process of the PEC+MAO hybrid coatings,an overlapping phenomenon in regard to coating thickness can be observed instead of heaping up layer by layer.Compared with both single PEC surface modification layers as well as single MAO coatings,the PEC+MAO hybrid coatings exhibit more superior anti-corrosion property.Especially,the EIS data reveal that the PEC+MAO hybrid coatings can act as an effective protection system to provide relatively excellent long-range anti-corrosion protection.Note also that employing same MAO technique for both single MAO treatment as well as PEC+MAO combining procedure is the key to this research.

An electrochemical method for evaluating the resistance to cathodic disbondment of anti-corrosion coatings on buried pipelines

Methods for evaluating the resistance to cathodic disbondment （RCD） of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests （CDT） have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method （PEM）, was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding （CD） were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.

Influence of graphene on the anti-corrosion performance of epoxy-based coatings

In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle test ,chemical solution immersion test, and electrochemical test. The water contact angle and chemical solution resistance of the epoxy-based coatings were improved with an increase in graphene content from 0 to 0.4%. These results prove that addition of graphene can significantly improve the hydrophobicity and impermeability of epoxy- based coatings. However, when the graphene content was increased to 0.5%, the performance of the epoxy-based coatings decreased because of graphene aggregation. Tafel polarization results show that graphene addition can significantly reduce the corrosion current density and corrosion potential of epoxy-based coatings, which enhance their anti-corrosion performance.

The Effect of Cerium Dioxide (CeO_2) in an Anti-corrosion and Self-lubricating Coating

The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.

An Abrasion Resistant TPU/SH-SiO_(2) Superhydrophobic Coating for Anti-Icing and Anti-Corrosion Applications

As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pollution,high energy-consumption,high-cost and other undesirable issues.Besides,the durability of superhydrophobic coating also plagues its commercial application.In this paper,we introduced a facile and environment-friendly technique for fabricating abrasion-resistant superhydrophobic surfaces using thermoplastic polyurethane(TPU)and modified SiO_(2)particles(SH-SiO_(2)).Both materials are non-toxicity,low-cost,and commercial available.Our methodology has the following advantages:use of minimal amounts of formulation,take the most streamlined technical route,and no waste material.These advantages make it attractive for industrial applications,and its usage sustainability can be promised.In this study,the mechanical stability of the superhydrophobic surface was evaluated by linear wear test.It is found that the excellent wear resistance of the superhydrophobic coating benefits from the characteristics of raw materials,the preparation strategy,and the special structure.In anti-icing properties test,the TPU/SH-SiO_(2)coating exhibits the repellency to the cold droplets and the ability to extend the freezing time.The electrochemical corrosion measurement shows that the asprepared superhydrophobic surface has excellent corrosion resistance that can provide effective protection for the bare Q235 substrates.These results indicate that the TPU/SH-SiO_(2)coating possesses good abrasion resistance and has great potential in anti-corrosion and anti-icing applications.

A novel anti-corrosion coating for magnesium alloy

A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat resisting test, neutral salt spray test and scanning electron microscopy (SEM). The results show that the coating has a stepped structure which can achieve good adhesion of first-grade, heat resistance temperature of 400℃, hardness of HV_ 0.50/30210 and anti-corrosion time of 250h in salt spray test. Meanwhile, the film forming and corrosion mechanism of the coating were also put forward based on the results of the Fourier transform infrared spectroscopy (FTIR) test and electrochemical impedance spectroscopy (EIS) test.

Stable and reversible zinc metal anode with fluorinated graphite nanosheets surface coating

A highly stable zinc metal anode modified with a fluorinated graphite nanosheets(FGNSs)coating was designed.The porous structure of the coating layer effectively hinders lateral mass transfer of Zn ions and suppresses dendrite growth.Moreover,the high electronegativity exhibited by fluorine atoms creates an almost superhydrophobic solid-liquid interface,thereby reducing the interaction between solvent water and the zinc substrate.Consequently,this leads to a significant inhibition of hydrogen evolution corrosion and other side reactions.The modified anode demonstrates exceptional cycling stability,as symmetric cells exhibit sustained cycling for over 1400 h at a current density of 5 mA/cm^(2).Moreover,the full cells with NH_(4)V_(4)O_(10)cathode exhibit an impressive capacity retention rate of 92.2%after undergoing 1000 cycles.

Development of anti-corrosive coating on AZ31 Mg alloy subjected to plasma electrolytic oxidation at sub-zero temperature

Plasma electrolytic oxidation(PEO)is a promising surface treatment to generate adherent and thick anti-corrosive coating on light-weight metals(Al,Mg,Ti,etc.)using an eco-friendly alkaline electrolyte.High energy plasma,however,inevitably generates porous structures that limit their practical performance.The present study proposes a straight-forward simple method by utilizing sub-zero electrolyte(268 K)to alter the plasma characteristics during formation of the protective coating on AZ31 Mg alloy via PEO with a comparison to the electrolyte at room temperature(298 K).In refrigerated electrolyte,the formation of micro-defects is suppressed relatively at the expense of low coating growth,which is measured to be twice lower than that at 298 K due to the temperature-dependent soft plasma discharges contributing to the development of the present coating.As a consequence,corrosion resistance of the sample processed at 268 K is superior to that of 298K,implying that the effect of coating thickness is less dominant than that of compactness.This phenomenon is interpreted in relation to the ionic movement and oxide solidification controlled by soft plasma discharges arising from the temperature gradient between electrolyte and surface of the substrate during PEO.

Bonding strength of graded anti-corrosive coatings of fluoroethylenepropylene (FEP)/polyphenylene sulfide (PPS)

Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found that the poor adhesion of fluororesin coatings to metallic substrates is improved obviously by the graded coating structure of FEP/PPS, and the bonding strength reaches up to 11.8 MPa for the five-layer system. Examination by electron probe microanalysis （EPMA） verifies that the distribution of main components is graded in the five-layer system, which is responsible for the enhancement of the interfacial bonding.

An Integrated Anti-Fouling and Anti-Corrosion Coating Enabled by rGO/AgNPs and Amphiphilic Networks

Marine corrosion and biofouling are challenges that affect marine industrial equipment,and protecting equipment with functional coatings is a simple and effective approach.However,it is extremely difficult to combine anti-corrosion and anti-fouling properties in a single coating.In this work,we combine reduced graphene oxide(rGO)/silver nanoparticles(AgNPs)with a hydrophilic polymer in a bio-based silicone-epoxy resin to create a coating with both anti-fouling and anti-corrosion properties.The excel-lent anti-fouling performance of the coating results from a ternary synergistic mechanism involving foul-ing release,contact inhibition,and a hydration effect,while the outstanding anti-corrosion performance is provided by a ternary synergistic anti-corrosion mechanism that includes a dense interpenetrating net-work(IPN)structure,a barrier effect,and passivation.The results show that the obtained coating pos-sesses superior anti-fouling activity against protein,bacteria,algae,and other marine organisms,as well as excellent anti-corrosion and certain self-healing properties due to its dynamic cross-linked net-work of rGO/AgNPs and the hydrophilic polymer.This work provides an anti-corrosion and anti-fouling integrated coating for marine industrial equipment.

Investigation on Fe,Mn,Zn,Cu,Pb and Cd fractions in the natural surface coating samples and surficial sediments in the Songhua River,China

Natural surface coating samples （NSCSs） from the surface of shingles and surficial sediments （SSs） in the Songhua River, China were employed to investigate the relationship between NSCSs and SSs in fractions of heavy metals （Fe, Mn, Zn, Cu, Pb, and Cd） using the modified sequential extraction procedure （MSEP）. The results show that the differences between NSCSs and SSs in Fe fi＇actions were insignificant and Fe was dominantly present as residual phase （76.22% for NSCSs and 80.88% for SSs） and Fe-oxides phase （20.33% for NSCSs and 16.15% for SSs）. Significant variation of Mn distribution patterns between NSCSs and SSs was observed with Mn in NSCSs mainly present in Mn-oxides phase （48.27%） and that in SSs present as residual phase （45.44%）. Zn, Cu, Pb and Cd were found dominantly in residual fractions （〉48%）, and next in solid oxides/hydroxides for Zn, Pb and Cd and in easily oxidizable solids/compounds form for Cu, respectively. The heavy metal distribution patterns implied that Fe/Mn oxides both in NSCSs and SSs were more important sinks for binding and adsorption of Zn, Pb and Cd than organic matter （OM）, and inversely, higher affinity of Cu to OM than Fe/Mn oxides in NSCSs and SSs was obtained. Meanwhile, it was found that the distributions of heavy metals in NSCSs and SSs were similar to each other and the pseudo-total concentrations of Zn, Cu, Pb and Cd in NSCSs were greater than those in SSs, highlighting the more importance for NSCSs than SSs in controlling behaviours of heavy metals in aquatic environments.

Cerium Methacrylate Assisted Preparation of Highly Thermally Conductive and Anticorrosive Multifunctional Coatings for Heat Conduction Metals Protection

Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive and urgent need while a difficult task.Here we report a multifunctional epoxy composite coating(F-CB/CEP)by synthesizing cerium methacrylate and ingeniously using it as a novel curing agent with corrosion inhibit for epoxy resin and modifier for boron nitride through"cation-π"interaction.The prepared F-CB/CEP coating presents a high TC of 4.29 W m^(−1)K^(−1),which is much higher than other reported anti-corrosion polymer coatings and thereby endowing metal materials coated by this coating with outstanding thermal management performance compared with those coated by pure epoxy coating.Meanwhile,the low-frequency impedance remains at 5.1×10^(11)Ωcm^(2)even after 181 days of immersion in 3.5 wt%NaCl solution.Besides,the coating also exhibits well hydrophobicity,self-cleaning properties,temperature resistance and adhesion.This work provides valuable insights for the preparation of high-performance composite coatings with potential to be used as advanced multifunctional thermal management materials,especially for heat conduction metals protection.

Investigation of Adsorption Rates of Pb, Cd, Cu, Co and Ni to Fresh-water Surface Coatings Developed in Nanhu Lake

The adsorption kinetics of five heavy metals onto the natural surface coatings, which were collected in the Nanhu Lake in Changchun, Jilin Province, China, were investigated for the purpose of giving some explanations for the mechanisms of heavy metal adsorption onto the surface coatings with initial metal ions of 5 μmol/L. The results show that firstly, the adsorption of heavy metals onto the surface coatings follows the first order kinetics; secondly, the double-constant rate equation is suitable to describing the adsorption of heavy metals selected onto the natural aquatic surface coatings, following the order K_ Cu>K_ Pb>K_ Co>K_ Ni>K_ Cd; thirdly, there is a significant correlation between the adsorption rate and the physical and chemical characteristics of heavy metals, such as E 0, Δ_fH 0_m, and Δ_fG 0_m based on the linear regression analysis.

Recent Progress in Superhydrophobic Coatings Using Molecular Dynamics Simulations and Experimental Techniques

Superhydrophobic(SH)coatings are intended to resist a surface from cor­rosion and thereby increases the product life duration.It is also a promising solution to save cleaning costs and time by providing self-clean nature to the surface.This review article provides the most recent updates in design­ing SH surfaces and their characterizations adopted both in experimental and computational techniques.To gain a comprehensive perspective,the SH surfaces present in nature those are inspiring human beings to mimic such surfaces are introduced at the beginning of this article.Subsequently,different fabrication techniques undertaken recently to design artificial SH surfaces are briefly discussed.Recent progress in computations employed in the development of SH surfaces is then discussed.Next,the limitations in SH surfaces are addressed.Finally,perceptiveness of different strategies and their limitations are presented in the concluding remarks and outlook.Overall,this mini review article brings together and highlights the significant advancements in fabrication of superhydrophobic surfaces which may surely help the early-stage researchers/scientists to plan their work accordingly.

JAS COAT固化剂对磷石膏环境风险的影响

磷石膏是湿法生产磷酸的副产物,大量堆存的磷石膏给环境造成了巨大的压力。通过室内理化性质试验研究了JAS COAT固化剂对磷石膏性能的改良,优选出适宜的JAS COAT固化剂掺量及含水率,并对稳定化机理进行了探讨。结果表明,加水及固化剂不能改变磷石膏中重金属的总量,但明显降低了浸出液中重金属的质量浓度;固化剂掺量为3%~5%时,磷石膏的放射性随含水率增加呈先减小后增大的趋势。

Tribological and anti-corrosion performance of epoxy resin composite coatings reinforced with differently sized cubic boron nitride(CBN)particles

A series of high solid content(30 wt%)epoxy resin(EP)composite coatings reinforced with differently sized cubic boron nitride(CBN)particles were fabricated successfully on 304 L stainless steel.Polydopamine(PDA)was used to improve the dispersibility of CBN particles in EP.The structural and morphological features of the CBN particles and the composite coatings were characterized by Raman spectroscopy,scanning electron microscopy(SEM),and transmission electron microscopy(TEM).Moreover,a UMT-3 tribometer and surface profiler were used to investigate the tribological behaviors of the as-prepared composite coatings.Electrochemical impedance spectroscopy(EIS)and Tafel analysis were used to investigate the coatings'anti-corrosion performance.The results demonstrated that the CBN fillers could effectively enhance the tribological and anti-corrosion properties of the EP composite coatings.In addition,when the additive proportion of the microsized(5μm)and nanosized(550 nm)CBN particles was 1:1,the tribological property of the EP composite coatings was optimal for dry sliding,which was attributed to the load carrying capability of the microsized CBN particles and the toughening effect of the nanosized CBN particles.However,when the additive proportion of the microsized and nanosized CBN particles was 2:1,the tribology and corrosion resistance performance were optimal in seawater conditions.We ascribed this to the load-carrying capacity of the microparticles,which played a more important role under the seawater lubrication condition,and the more compact structure,which improved the electrolyte barrier ability for the composite coatings.

Superior anti-corrosion and self-healing bi-functional polymer composite coatings with polydopamine modified mesoporous silica/graphene oxide

In this article,graphene oxide(GO)and benzotriazole-loaded mesoporous silica nanoparticles(BTA/MSNs)are combined on micro scale through the in situ polymerization of polydopamine(PDA),preparing a selfhealing bi-functional GO(fGO)used as nano-fillers for anti-corrosion enhancement of waterborne epoxy(WEP)coatings.Scanning electronic microscopy(SEM)images show that the BTA/MSNs are uniformly distributed on the surface of high aspect ratio GO nanosheets to endow GO nanocontainer characteristics.UV-vis profiles demonstrate that fGO has p H-controlled release function.Modulus at lowest frequency is generally used for comparing the corrosion resistance of organic coatings.Modulus at lowest frequency(1.42×10^(5)Ωcm^(2))after 30 days immersion in 3.5 wt.%Na Cl solution revealed 2 orders of magnitude higher that of blank WEP(1.17×10^(7)Ωcm^(2)).With artificial cracks on its coatings,fGO/WEP had no obvious rust compared with blank WEP after 240 h of immersion.We anticipate that self-healing and physical barrier bi-functional nanocontainers improve the traditional anticorrosion coating efficiency with better,longer-lasting performance for shipping,oil drilling or bridge maintenance.

Experimental investigation on ablation characteristics of coated and uncoated steel under 30/80 μs impulse current

The ablation tests on coated and uncoated Q235 B steel sheets were conducted under 30/80 μs impulse current simulating the lightning first return stroke current, aimed at further understanding the ablation characteristics of steel and investigating the impact of anti-corrosion coating on these characteristics. Ablation characteristics were investigated through the macroscopic morphology and x-ray diffraction patterns on the surface of damaged zones, the microstructure and micro Vickers hardness on the cross-section of damaged zones, and the maximum rear-face temperature of sample sheets. It can be concluded that the ablation areas of uncoated sheet consist of the melted layer and the heat-affect layer. These ablation areas include not only the area ablated directly by the arc root, of which the depth is deeper, but also the area forming due to the splashing of molten steel, of which the depth is shallower and decreases when the area’s distance from the arc attachment point increases. For coated sheet, coating materials have decomposed and evaporated forming an ablation pit on the sheet surface, in which the steel surface is exposed, and zinc filler of coating primer has infused into the exposed surface. The ablation diameter of uncoated sheet relates to the amplitude of the 30/80 μs impulse current in quadratic function, while for coated sheet, the relation is linear. In general, under the 30/80 μs impulse current, the coating can decrease the energy injected from the arc to the steel sheet and reduce the melting and splashing of steel. As a result, the ablation severity of uncoated sheet is severer than that of coated sheet.