A novel experimental procedure was proposed to investigate the phase behavior of a solvent mixture(SM)(64 mol%CH4,8 mol%CO2,and 28 mol%C3 H8)with heavy oil.Then,a theoretical methodology was employed to estimate the p...A novel experimental procedure was proposed to investigate the phase behavior of a solvent mixture(SM)(64 mol%CH4,8 mol%CO2,and 28 mol%C3 H8)with heavy oil.Then,a theoretical methodology was employed to estimate the phase behavior of the heavy oil-solvent mixture(HO-SM)systems with various mole fractions of SM.The experimental results show that as the mole fraction of SM increases,the saturation pressures and swelling factors of the HO-SM systems considerably increase,and the viscosities and densities of the HO-SM systems decrease.The heavy oil is upgraded in situ via asphaltene precipitation and SM dissolution.Therefore,the solvent-enriched oil phase at the top layer of reservoirs can easily be produced from the reservoir.The aforementioned results indicate that the SM has promising application potential for enhanced heavy oil recovery via solvent-based processes.The theoretical methodology can accurately predict the saturation pressures,swelling factors,and densities of HO-SM systems with various mole fractions of SM,with average error percentages of1.77%for saturation pressures,0.07%for swelling factors,and 0.07%for densities.展开更多
Liaohe super-heavy crude oil was separated into its components, namely saturates, aromatics, resins, and asphaltenes （SARA）, by the group separation method. Several solvents were used to extract different forms of m...Liaohe super-heavy crude oil was separated into its components, namely saturates, aromatics, resins, and asphaltenes （SARA）, by the group separation method. Several solvents were used to extract different forms of metallic elements from crude oil. The metallic elements, such as calcium, nickel, iron and manganese, in crude oil, SARA and extract samples were analyzed by inductively coupled plasma atomic emission spectroscopy （ICP-AES）. The results demonstrate that the contents of calcium, nickel, iron, and manganese gradually increase in saturates, aromatics, resins, and asphaltenes, suggesting that the abundance of the four metallic elements in asphaltenes is much higher than that in the other groups. For example, the content of calcium in asphaltenes reaches a maximum of 7,920 pg/g. Among the SARA components of Liaohe super-heavy crude oil, resins account for more than 50 wt%, suggesting that the total amount of the four metallic elements are higher in the resin component than in other components. The four metallic elements mainly exist in the form of organic metallic compounds in crude oil. Further analysis shows that calcium and manganese elements exist mainly as metal salts of petroleum acids, and the majority of the iron and all the nickel exist mainly as metalloporphyrin and non-metalloporphyrin compounds.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51604293)the Shandong Provincial Natural Science Foundation,China(No.ZR2016EEB30)+3 种基金the Fundamental Research Funds for the Central Universities(No.17CX02009A)the Qingdao Applied Basic Research Program(Source Innovation)(No.17-1-1-32-jch)the Scientific Research Foundation of China University of Petroleum for Talent Introduction(No.YJ201601093)the National Science and Technology Major Project(2016ZX05031-002)。
文摘A novel experimental procedure was proposed to investigate the phase behavior of a solvent mixture(SM)(64 mol%CH4,8 mol%CO2,and 28 mol%C3 H8)with heavy oil.Then,a theoretical methodology was employed to estimate the phase behavior of the heavy oil-solvent mixture(HO-SM)systems with various mole fractions of SM.The experimental results show that as the mole fraction of SM increases,the saturation pressures and swelling factors of the HO-SM systems considerably increase,and the viscosities and densities of the HO-SM systems decrease.The heavy oil is upgraded in situ via asphaltene precipitation and SM dissolution.Therefore,the solvent-enriched oil phase at the top layer of reservoirs can easily be produced from the reservoir.The aforementioned results indicate that the SM has promising application potential for enhanced heavy oil recovery via solvent-based processes.The theoretical methodology can accurately predict the saturation pressures,swelling factors,and densities of HO-SM systems with various mole fractions of SM,with average error percentages of1.77%for saturation pressures,0.07%for swelling factors,and 0.07%for densities.
基金supported by the National Natural Science Foundation of China (No. 20576075 and 21206194)
文摘Liaohe super-heavy crude oil was separated into its components, namely saturates, aromatics, resins, and asphaltenes （SARA）, by the group separation method. Several solvents were used to extract different forms of metallic elements from crude oil. The metallic elements, such as calcium, nickel, iron and manganese, in crude oil, SARA and extract samples were analyzed by inductively coupled plasma atomic emission spectroscopy （ICP-AES）. The results demonstrate that the contents of calcium, nickel, iron, and manganese gradually increase in saturates, aromatics, resins, and asphaltenes, suggesting that the abundance of the four metallic elements in asphaltenes is much higher than that in the other groups. For example, the content of calcium in asphaltenes reaches a maximum of 7,920 pg/g. Among the SARA components of Liaohe super-heavy crude oil, resins account for more than 50 wt%, suggesting that the total amount of the four metallic elements are higher in the resin component than in other components. The four metallic elements mainly exist in the form of organic metallic compounds in crude oil. Further analysis shows that calcium and manganese elements exist mainly as metal salts of petroleum acids, and the majority of the iron and all the nickel exist mainly as metalloporphyrin and non-metalloporphyrin compounds.
