Separation of halogens and recovery of heavy metals from secondary copper smelting dust

The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasibility of the phase transformation to metal sulfates and to gaseous HF and HCl.Under the sulfating roasting conditions of the roasting temperature of 250℃ and the sulfuric acid excess coefficient of 1.8,over 74 wt.%of F and 98 wt.%of Cl were volatilized into flue gas.Approximately 98.6 wt.%of Zn and 96.5 wt.%of Cu in the roasting product were dissolved into the leaching solution after the water leaching process,while the leaching efficiencies of Pb and Sn were only 0.12%and 0.22%,respectively.The mechanism studies indicate the pivotal effect of roasting temperature on the sulphation reactions from various metal species to metal sulfates and the salting out reactions from various metal halides to gaseous hydrogen halides.

Extraction and separation of heavy rare earths from chloride medium byα-aminophosphonic acid HEHAPP

The extraction and separation of heavy rare earths（REs） using newly synthesized a-aminophosphonic acid extractant 2-ethylhexyl-3-（2-ethylhexylamino）pentan-3-yl phosphonic acid（HEHAPP, HA） in nheptane were investigated from chloride medium. The extraction stoichiometries of lanthanum, gadolinium, yttrium and lutetium are determined to be REA3 by the slope analysis method. The favorable separation factors of adjacent heavy REs（Ⅲ）,i.e. β（Y/Ho）, β（Er/Y）,β（Tm/Er）,β（Yb/Tm） and β（Lu/Yb）, are determined to be1.87,1.36, 3.21,3.22 and 1.93, respectively, when extracted from a binary system at proper condition. The loading capacities of HA for Ho, Er, Yb and Lu increase in the order Ho 〈 Er 〈 Yb 〈 Lu with the values being 0.201, 0.205, 0.216 and 0.229 mol/L, respectively. So HA would be a potential extractant for the separation of heavy REs（Ⅲ）. Among inorganic acids such as H2 SO4, HNO3 and HCl, HCl is tested to be the most effective stripping agent.

Research on super-low-ash anthracite preparation

The fundamental question of super-low-ash coal preparation is how to furthest depress high ash component pollution. A jigging process was used to remove high ash refuse and middling, then a high precision heavy medium cyclone was used to further separate near gravity light material. A two-stage heavy medium cylindrical cyclone with the same separation density was used to increase the precision of separation. The feed was de-slimed and fine-grind coal was added with media to improve the stability of the suspension. The pump frequency conversion timing and an air spring were used to steady the cyclone inlet pressure. Based on a series of study and pilot tests, a 1.00 Mt/a (output) commercial separation system with Ep value under 0.015 was built up. Super low ash (Ad≤2.00%) Taixi Anthracite has been put into commercial production.

Removal of heavy metals and arsenic from a co-contaminated soil by sieving combined with washing process

Batch experiments were conducted with a heavy metals and arsenic co-contaminated soil from an abandoned mine to evaluate the feasibility of a remediation technology that combines sieving with soil washing.Leaching of the arsenic and heavy metals from the different particle size fractions was found to decrease in the order：〈 0.1,2–0.1,and 〉 2 mm.With increased contact time,the concentration of heavy metals in the leachate was significantly decreased for small particles,probably because of adsorption by the clay soil component.For the different particle sizes,the removal efficiencies for Pb and Cd were75%–87%,and 61%–77% for Zn and Cu,although the extent of removal was decreased for As and Cr at 〈 45%.The highest efficiency by washing for Pb,Cd,Zn,and As was from the soil particles 〉 2 mm,although good metal removal efficiencies were also achieved in the small particle size fractions.Through SEM-EDS observations and correlation analysis,the leaching regularity of the heavy metals and arsenic was found to be closely related to Fe,Mn,and Ca contents of the soil fractions.The remediation of heavy metal-contaminated soil by sieving combined with soil washing was proven to be efficient,and practical remediation parameters were also recommended.