The effects of different helium cooling conditions on the molten pool depth,dendrite structure,and microsegregation of GH4169 alloy ?508 mm vacuum arc remelting( VAR) ingots were studied using an optical microscope an...The effects of different helium cooling conditions on the molten pool depth,dendrite structure,and microsegregation of GH4169 alloy ?508 mm vacuum arc remelting( VAR) ingots were studied using an optical microscope and an electron probe. The results show that under different helium cooling conditions,the growth of columnar crystals in the VAR ingot is the same with a certain angle running from the edge to the center and the dendrites at the edges are relatively small whereas the dendrites near the center are large. As the helium cooling increased,the molten pool depth decreased from 137 mm to 120 mm. Observations of the microstructure showed that as the helium cooling increased,the secondary dendrite arm spacing( SDAS) decreased at the center and R/2 region. Also,the Laves phase content markedly decreased. Under the same helium cooling conditions,the SDAS and Laves phase content at the center were higher than that at the R/2 region. Thus,more intense helium cooling effectively reduced segregation in VAR ingots and improved the metallurgical quality.展开更多
The HCPB concept has been a European DEMO reference concept for nearly one decade. Detailed thermal-hydraulic study on the control behavior of the whole system is one of the important parts of this development. The th...The HCPB concept has been a European DEMO reference concept for nearly one decade. Detailed thermal-hydraulic study on the control behavior of the whole system is one of the important parts of this development. The thermal-hydraulic effect of the TBM-combined cooling circuit during a cyclic operation in ITER has been studied using the system code RELAP5. The RELAP5 is based on an one-dimensional, transient two-fluid model for the flow of a two-phase steam-water mixture that can contain noncondensable components like Helium. The RELAP5models are modified to take the cyclic operation of the circulator, heat, exchanger, bypass, valves etc in to account. A sequence of operational phases is investigated, starting from the cold state through the heating phase that brings the system to a stand-by condition, followed by typical power cycles applied in ITER. The results show that the implemented control mechanisms keep the inlet temperature to the TBM and the total mass flow rate at the required values through all phases.展开更多
Shanghai No.5 Steel Co., Ltd. has recently introduced a set of 5-ton protective atmosphere elec-troslag remelting furnace and a set of 10-ton helium-cooling vacuum arc remelting furnace, both of them are the first one...Shanghai No.5 Steel Co., Ltd. has recently introduced a set of 5-ton protective atmosphere elec-troslag remelting furnace and a set of 10-ton helium-cooling vacuum arc remelting furnace, both of them are the first one of its kind in China. With these equipment, remelting processes about alloy GH4169, CH2132 and GH738 were researched, the process of producing alloy GH4169 by VIM+VAR+ESR triplex-process was developed, and their effects were discussed.展开更多
文摘The effects of different helium cooling conditions on the molten pool depth,dendrite structure,and microsegregation of GH4169 alloy ?508 mm vacuum arc remelting( VAR) ingots were studied using an optical microscope and an electron probe. The results show that under different helium cooling conditions,the growth of columnar crystals in the VAR ingot is the same with a certain angle running from the edge to the center and the dendrites at the edges are relatively small whereas the dendrites near the center are large. As the helium cooling increased,the molten pool depth decreased from 137 mm to 120 mm. Observations of the microstructure showed that as the helium cooling increased,the secondary dendrite arm spacing( SDAS) decreased at the center and R/2 region. Also,the Laves phase content markedly decreased. Under the same helium cooling conditions,the SDAS and Laves phase content at the center were higher than that at the R/2 region. Thus,more intense helium cooling effectively reduced segregation in VAR ingots and improved the metallurgical quality.
基金The project supported by European Fusion Development Agreement (EFDA) Technology Work Program
文摘The HCPB concept has been a European DEMO reference concept for nearly one decade. Detailed thermal-hydraulic study on the control behavior of the whole system is one of the important parts of this development. The thermal-hydraulic effect of the TBM-combined cooling circuit during a cyclic operation in ITER has been studied using the system code RELAP5. The RELAP5 is based on an one-dimensional, transient two-fluid model for the flow of a two-phase steam-water mixture that can contain noncondensable components like Helium. The RELAP5models are modified to take the cyclic operation of the circulator, heat, exchanger, bypass, valves etc in to account. A sequence of operational phases is investigated, starting from the cold state through the heating phase that brings the system to a stand-by condition, followed by typical power cycles applied in ITER. The results show that the implemented control mechanisms keep the inlet temperature to the TBM and the total mass flow rate at the required values through all phases.
文摘Shanghai No.5 Steel Co., Ltd. has recently introduced a set of 5-ton protective atmosphere elec-troslag remelting furnace and a set of 10-ton helium-cooling vacuum arc remelting furnace, both of them are the first one of its kind in China. With these equipment, remelting processes about alloy GH4169, CH2132 and GH738 were researched, the process of producing alloy GH4169 by VIM+VAR+ESR triplex-process was developed, and their effects were discussed.
