Thermogravimetric characteristics of corn straw and bituminous coal copyrolysis based the ilmenite oxygen carriers

Herein,the co-pyrolysis reaction characteristics of corn straw(CS)and bituminous coal in the presence of ilmenite oxygen carriers(OCs)are investigated via thermogravimetry coupled with mass spectrometry.The results reveal that the participation of OCs weakens the devolatilization intensity of co-pyrolysis.When the CS blending ratio is<50%,the mixed fuel exhibits positive synergistic effects.The fitting results according to the Coats-Redfern integral method show that the solid-solid interaction between OCs and coke changes the reaction kinetics,enhancing the co-pyrolysis reactivity at the high-temperature zone(750-950C).The synergistic effect is most prominent at a 30%CS blending ratio,with copyrolysis activation energy in the range of 26.35-40.57 kJ·mol^(-1).

Optimizing the sulfur-resistance and activity of perovskite oxygen carrier for chemical looping dry reforming of methane

Perovskite oxides has been attracted much attention as high-performance oxygen carriers for chemical looping reforming of methane,but they are easily inactivated by the presence of trace H_(2)S.Here,we propose to modulate both the activity and resistance to sulfur poisoning by dual substitution of Mo and Ni ions with the Fe-sites of LaFeO_(3)perovskite.It is found that partial substitution of Ni for Fe substantially improves the activity of LaFeO_(3)perovskite,while Ni particles prefer to grow and react with H_(2)S during the long-term successive redox process,resulting in the deactivation of oxygen carriers.With the presence of Mo in LaNi_(0.05)Fe_(0.95)O_(3−σ)perovskite,H_(2)S preferentially reacts with Mo to generate MoS_(2),and then the CO_(2)oxidation can regenerate Mo via removing sulfur.In addition,Mo can inhibit the accumulation and growth of Ni,which helps to improve the redox stability of oxygen carriers.The LaNi_(0.05)Mo_(0.07)Fe_(0.88)O_(3−σ)oxygen carrier exhibits stable and excellent performance,with the CH_(4)conversion higher than 90%during the 50 redox cycles in the presence of 50 ppm H_(2)S at 800℃.This work highlights a synergistic effect in the perovskite oxides induced by dual substitution of different cations for the development of high-performance oxygen carriers with excellent sulfur tolerance.

Ethane Chemical Looping Oxidative Dehydrogenation to Ethylene over Co_(2)O_(3)(Fe_(2)O_(3),NiO)/LaCoO_(3) Oxygen Carriers

Ethane chemical looping oxidative dehydrogenation(CL-ODH)to ethylene is a new technology for converting ethane to ethylene.In the current study MeO/LaCoO_(3)(MeO=Fe_(2)O_(3),NiO or Co_(2)O_(3))composite metal oxides were prepared via citrate gel and impregnation methods,and used as oxygen carriers for CL-ODH.X-ray diffraction results indicated that all oxygen carriers had a perovskite structure even after eight redox cycles.Under a reaction temperature of 650°C,a reaction pressure of 0.1 MPa,and a weight hourly space velocity(WHSV)of 7500 mL/(g·h),ethane conversion over Co_(2)O_(3)/LaCoO_(3) reached 100%and ethylene selectivity reached 60%,both of which were better than corresponding values attained over Fe_(2)O_(3)/LaCoO_(3) and NiO/LaCoO_(3).Ethylene selectivity remained stable for 80 cycles over Co_(2)O_(3)/LaCoO_(3),then decreased gradually after 80 cycles.X-ray photoelectron spectroscopy results and evaluation results indicated that lattice oxygen and O_(2)2-had a direct relationship with ethane conversion and ethylene selectivity.Co_(2)O_(3)/LaCoO_(3) exhibited a strong capacity to release and absorb oxygen,mainly due to interaction between Co_(2)O_(3) and LaCoO_(3).

Advancements in biomass gasification research utilizing iron-based oxygen carriers in chemical looping:A review

Biomass,recognized as renewable green coal,is pivotal for energy conservation,emission reduction,and dualcarbon objectives.Chemical looping gasification,an innovative technology,aims to enhance biomass utilization efficiency.Using metal oxides as oxygen carriers regulates the oxygen-to-fuel ratio to optimize synthesis product yields.This review examines various oxygen carriers and their roles in chemical looping biomass gasification,including natural iron ore types,industrial by-products,cerium oxide-based carriers,and core-shell structures.The catalytic,kinetic,and phase transfer properties of iron-based oxygen carriers are analyzed,and their catalytic cracking capabilities are explored.Molecular interactions are elucidated and system performance is optimized by providing insights into chemical looping reaction mechanisms and strategies to improve carrier efficiency,along with discussing advanced techniques such as density functional theory(DFT)and reactive force field(ReaxFF)molecular dynamics(MD).This paper serves as a roadmap for advancing chemical looping gasification towards sustainable energy goals.

CO_(2)capture costs of chemical looping combustion of biomass:A comparison of natural and synthetic oxygen carrier

Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and mitigate climate change.In this process,a metal oxide is used as oxygen carrier in a dual fluidized bed to generate clean CO_(2) via combustion of biomass.Most commonly,natural ores or synthetic materials are used as oxygen carrier whereas both must meet special requirements for the conversion of solid fuels.Synthetic oxygen carriers are characterized by higher reactivity at the expense of higher costs versus the lower-cost natural ores.To determine the viability of both possibilities,a techno-economic comparison of a synthetic material based on manganese,iron,and copper to the natural ore ilmenite was conducted.The synthetic oxygen carrier was characterized and tested in a pilot plant,where high combustion efficiencies up to 98.4%and carbon capture rates up to 98.5%were reached.The techno-economic assessment resulted in CO_(2) capture costs of 75 and 40€/tCO_(2) for the synthetic and natural ore route respectively,whereas a sensitivity analysis showed the high impact of production costs and attrition rates of the synthetic material.The synthetic oxygen carrier could break even with the natural ore in case of lower production costs and attrition rates,which could be reached by adapting the production process and recycling material.By comparison to state-of-the-art technologies,it is demonstrated that both routes are viable and the capture cost of CO_(2) could be reduced by implementing the chemical looping combustion technology.

Chemical looping oxidative propane dehydrogenation controlled by oxygen bulk diffusion over FeVO_(4)oxygen carrier pellets

The oxygen distribution and evolution within the oxygen carrier exert significant influence on chemical looping processes.This paper describes the influence of oxygen bulk diffusion within FeVO4 oxygen carrier pellets on the chemical looping oxidative propane dehydrogenation(CL-ODH).During CL-ODH,the oxygen concentration at the pellet surface initially decreased and then maintained stable before the final decrease.At the stage with the stable surface oxygen concentration,the reaction showed a stable C3H6 formation rate and high C3H6 selectivity.Therefore,based on Fick’s second law,the oxygen distribution and evolution in the oxygen carrier at this stage were further analyzed.It was found that main reactions of selective oxidation and over-oxidation were controlled by the oxygen bulk diffusion.C3H8 conversion rate kept decreasing during this stage due to the decrease of the oxygen flux caused by the decline of oxygen gradient within the oxygen carrier,while C3H6 selectivity increased due to the decrease of overoxidation.In addition,reaction rates could increase with the propane partial pressure due to the increase of the oxygen gradient within the oxygen carrier until the bulk transfer reached its limit at higher propane partial pressure.This study provides fundamental insights for the diffusion-controlled chemical looping reactions.

Selective oxidation of methane to syngas using Pr_(0.7)Zr_(0.3)O_(2-δ): Stability of oxygen carrier

Pr0.7Zr0.3O2-δ solid solution was prepared by co-precipitation method and used as an oxygen carrier in the selective oxidation of methane to syngas(methane/air redox process). The evolution on the physicochemical properties of Pr0.7Zr0.3O2-δ during the redox process was studied by means of X-ray diffraction(XRD), H2 temperature-programmed reduction(H2-TPR), O2temperature-programmed desorption(O2-TPD), Brunauer-Emmett-Teller(BET) surface area measurement and X-ray photoelectron spectroscopy(XPS) technologies. The results indicated that Pr0.7Zr0.3O2-δ solid solution showed the high activity for the methane conversion to syngas with a high CO selectivity in the range of 83.5%-88.1%. Though Pr-Zr solid solution possessed high thermal stability, lattice oxygen was obviously reduced for the recycled sample due to decreased surface oxygen which promoted oxygen vacancies. The increased oxygen vacancies seemed to enhance the oxygen transfer ability in the redox process and provided sufficient oxygen for the methane selective oxidation, resulting in a satisfactory activity. The problem of hot pot was avoided by comparing fresh, aged and recycle sample in the reaction.

Application of Fe_2O_3/Al_2O_3 Composite Particles as Oxygen Carrier of Chemical Looping Combustion

Chemical looping combustion （CLC） of carbonaceous compounds has been proposed, in the past decade, as an efficient method for CO2 capture without cost of extra energy penalties. The technique involves the use of a metal oxide as an oxygen carrier that transfers oxygen from combustion air to fuels. The combustion is carried out in a two-step process： in the fuel reactor, the fuel is oxidized by a metal oxide, and in the air reactor, the reduced metal is oxidized back to the original phase. The use of iron oxide as an oxygen carrier has been investigated in this article. Particles composed of 80 wt% Fe2O3, together with Al2O3 as binder, have been prepared by impregnation methods. X-ray diffraction （XRD） analysis reveals that Fe2O3 does not interact with the Al2O3 binder after multi-cycles. The reactivity of the oxygen carrier particles has been studied in twenty-cycle reduction-oxidation tests in a thermal gravimetrical analysis （TGA） reactor. The components in the outlet gas have been analyzed. It has been observed that about 85% of CH4 converted to CO2 and H2O during most of the reduction periods. The oxygen carrier has kept quite a high reactivity in the twenty-cycle reactions. In the first twenty reaction cycles, the reaction rates became slightly higher with the number of cyclic reactions increasing, which was confirmed by the scanning electron microscopy （SEM） test results. The SEM analysis revealed that the pore size inside the particle had been enlarged by the thermal stress during the reaction, which was favorable for diffusion of the gaseous reactants into the particles. The experimental results suggested that the Fe2O3/Al2O3 oxygen carrier was a promising candidate for a CLC system.

Comparison of LaFeO_3,La_(0.8)Sr_(0.2)FeO_3,and La_(0.8)Sr_(0.2)Fe_(0.9)CO_(0.1)O_3 perovskite oxides as oxygen carrier for partial oxidation of methane

Comparison of LaFeO3, La0.8Sr0.2FeO3, and La0.8Sr0.2Fe0.9CO0.1O3 perovskite oxides as oxygen carrier for partial oxidation of methane in the absence of gaseous oxygen was investigated by continuous flow reaction and sequential redox reaction, Methane was oxidized to syngas with high selectivity by oxygen species of perovskite oxides in the absence of gaseous oxygen. The sequential redox reaction revealed that the structural stability and continuous oxygen supply in redox reaction decreased over La0.8Sr0.2Fe0.9Co0. 1O3 oxide, while LaFeO3 and La0.8Sr0.2FeO3 exhibited excellent structural stability and continuous oxygen supply.

Effect of Gasifying Medium on the Coal Chemical Looping Gasification with CaSO_4 as Oxygen Carrier

The chemical looping gasification uses an oxygen carrier for solid fuel gasification by supplying insufficient lattice oxygen. The effect of gasifying medium on the coal chemical looping gasification with Ca SO4 as oxygen carrier is investigated in this paper. The thermodynamical analysis indicates that the addition of steam and CO2 into the system can reduce the reaction temperature, at which the concentration of syngas reaches its maximum value.Experimental result in thermogravimetric analyzer and a fixed-bed reactor shows that the mixture sample goes through three stages, drying stage, pyrolysis stage and chemical looping gasification stage, with the temperature for three different gaseous media. The peak fitting and isoconversional methods are used to determine the reaction mechanism of the complex reactions in the chemical looping gasification process. It demonstrates that the gasifying medium(steam or CO2) boosts the chemical looping process by reducing the activation energy in the overall reaction and gasification reactions of coal char. However, the mechanism using steam as the gasifying medium differs from that using CO2. With steam as the gasifying medium, parallel reactions occur in the beginning stage, followed by a limiting stage shifting from a kinetic to a diffusion regime. It is opposite to the reaction mechanism with CO2 as the gasifying medium.

Chemical looping catalytic gasification of biomass over active LaNixFe1-xO_(3)perovskites as functional oxygen carriers

Oxygen carriers(OCs)with perovskite structure are attracting increasing interests due to their redox tunability by introducing various dopants in the structure.In this study,LaNixFe1-xO3(x=0,0.1,0.3,0.5,0.7,1.0)perovskite OCs have been prepared by a citric acid–nitrate sol–gel method,characterized by means of X-ray diffraction(XRD)analysis and tested for algae chemical looping gasification in a fixed bed reactor.The effects of perovskite types,OC/biomass mass ratio(O/B),gasification temperature and water injection rate on the gasification performance were investigated.Lower Ni-doped(0≤x≤0.5)perovskites crystalized in the rhombohedra system which was isostructural with LaNiO3,while those with composition 0.5≤x≤1 crystalized in the orthorhombic system.Despite the high reactivity for LaNiO_(3),LaNi_(0.5)Fe_(0.5)O_(3)(LN5F5)was found to be more stable at a high temperature and give almost as good results as LaNiO_(3)in the formation of syngas.The relatively higher syngas yield of 0.833 m^(3)·kg^(-1) biomass was obtained under the O/B of 0.4,water injection rate of 0.3 ml·min^(-1) and gasification temperature at 850C.Continuous high yield of syngas was achieved during the first 5 redox cycles,while a slight decrease in the reactivity for LN5F5 after 5 cycles was observed due to the adhesion of small grains occurring on the surface of OCs.However,an obvious improvement in the gasification performance was attained for LN5F5 compared to raw biomass direct gasification,indicating that LN5F5 is a promising functional OC for chemical looping catalytic gasification of biomass.

Layered Mg-Al spinel supported Ce-Fe-Zr-O oxygen carriers for chemical looping reforming

A series of layered Mg-Al spinel supported Ce-Fe-Zr-O oxygen carriers were prepared for co-production of syngas and pure hydrogen via chemical looping steam reforming(CLSR).The presence of magnesium-aluminum layered double oxides(Mg Al-LDO)significantly increases the specific surface area of the mixed oxides,reduces the particle size of CeO2-based solid solution and promotes the dispersion of free Fe2O3.When reacting with methane,Mg Al-LDO supported oxygen carrier shows much lower temperature for methane oxidation than the pure CeFe-Zr-O sample,indicating enhanced low-temperature reactivity.Among different Ce-Fe-Zr-O(x)/Mg Al-LDO samples,the Ce-Fe-Zr-O(40 wt%)/Mg Al-LDO sample shows the best performance for the selective oxidation of methane to syngas and the H2 production by water splitting.After a long period of high temperature redox experiment,the Ce-Fe-Zr-O(40 wt%)/Mg Al-LDO oxygen carrier still shows high activity for syngas generation.The comparison on the morphology of the fresh and cycled oxygen carriers indicates that the Mg-Al spinel support still forms a stable skeleton structure with high dispersion of active components on the surface after the long-term cycling,which contributes to excellent redox stability of the Ce-Fe-Zr-O(40 wt%)/Mg Al-LDO oxygen carrier.

Chemical looping gasification of sewage sludge using copper slag modified by NiO as an oxygen carrier

Chemical looping gasification(CLG) provides a novel approach to dispose the sewage sludge.In order to improve the reactivity of the calcined copper slag,NiO modification is considered as one of the good solutions.The copper slag calcined at 1100℃ doped with 20 wt% NiO(Ni20-CS) was used as an oxygen carrier(OC) in sludge CLG in the work.The modification of NiO can evidently enhance the reactivity of copper slag to promote the sludge conversion,especially for sludge char conversion.The carbon conversion and valid gas yield(V_(g)) increase from 67.02% and 0.23 m^(3)·kg^(-1) using the original OC to 78.34% and 0.29 m^(3)·kg^(-1) using the Ni20-CS OC, respectively.The increase of equivalent coefficient(Ω) facilitates the sludge conversion and a suitable Ω value is determined at 0.47 to obtain the highest valid gas yield(0.29 m^(3)·kg^(-1)).A suitable steam content is assigned at 27.22% to obtain the maximum carbon conversion of 87.09%,where an acceptable LHV of 12.63 MJ·m^(-3) and Vg of 0.39 m^(3)·kg^(-1)are obtained.Although the reactivity of Ni20-CS OC gradually decreases with the increase in cycle numbers because of the generation of NiFe_(2) O_(4-δ) species,the deposition of sludge ash containing many metallic elements is beneficial to the sludge conversion.As a result,the carbon conversion shows a slight uptrend with the increase of cycle numbers in sludge CLG.It indicates that the Ni20-CS sample is a good OC for sludge CLG.

Efficient CO2 to CO conversion at moderate temperatures enabled by the cobalt and copper co-doped ferrite oxygen carrier

Chemical looping technology holds great potential on efficient CO2 splitting with much higher CO production and CO2 splitting rate than photocatalytic processes.Conventional oxygen carrier requires high temperature(typically 850–1000°C)to ensure sufficient redox activity,but the stable and high CO2 conversion is favored at a lower temperature,leading to the degrading on the reaction kinetics as well as the low CO production and CO2 splitting rate.In this paper,we prepared several ternary spinels and demonstrated their performance for chemical looping CO2 splitting at moderate temperatures.Using the promotion effect of Cu to cobalt ferrite reduction and reversible phase change of the reduced metals,Cu0.4 Co0.6 Fe2 O4 exhibits high CO2 splitting rate(144.6μmol g–1 min–1)and total CO production(9100μmol g–1)at 650°C.The high performance of this earth-abundant spinel material is also consistent in repeated redox cycles,enabling their potential in industrial use.

Reaction characteristics investigation of CeO_(2)-enhanced CaSO_(4) oxygen carrier with lignite

Calcium sulfate(CaSO_(4))has been verified as a promising oxygen carrier(OC)in the chemical looping combustion(CLC)for its high oxygen capacity,abundant reserve and low cost,but its low reactivity and deleterious sulfur species emission from the side reactions of CaSO_(4) should be well considered for its wide application in CLC.In order to promote the reactivity of CaSO_(4) and increase its potential to inhibit the gaseous sulfur emission,a CeO_(2)-enhanced CaSO_(4) OC mixed OC of core–shell structure was prepared using the combined template synthesis method.Reaction characteristics of the prepared CaSO_(4)-CeO_(2) mixed OC with a typical lignite was first conducted and systematically investigated,and an improved reactivity of the prepared CaSO_(4)-CeO_(2) mixed OC was demonstrated than its single component CaSO_(4) or CeO_(2) due to the fast transfer and exchange of oxygen from the CaSO_(4) substrate to coal via the doped CeO_(2).Furthermore,the solid products formed from the mixed CaSO_(4)-CeO_(2) OC with the selected coal were collected and analyzed.Especially,evolution and redistribution of the sulfur species of different forms were focused.At the latter reaction stage of YN reaction with the CaSO_(4)-CeO_(2) mixed OC,the SO_(2) emitted from the side reactions of CaSO_(4) was greatly diminished and the doped CeO_(2) was proven effective to directionally fix the SO_(2) released to turn into different solid sulfur compounds,which were determined as Ce_(2)O_(2)S,Ce_(2)S_(3) and Ce_(2)(SO_(4))_(3)·5H_(2)O and formed through the different pathways.In addition,good regeneration of the reduced CaSO_(4)-CeO_(2) mixed OC could be reached in spite of the unavoidable interaction between the included minerals in coal and the reduced mixed OC.Overall,the combined template method-made CaSO_(4)-CeO_(2) mixed OC reported herein was not only endowed with enhanced reactivity for coal conversion,but also owned the potential to directionally fix the gaseous sulfur emission,which is quite applicable as OC for simultaneous decarbonatization and desulfurization in the real CLC process.

Evaluation of oxygen uncoupling characteristics of oxygen carrier using micro-fluidized bed thermogravimetric analysis

Oxygen uncoupling characteristics of a natural manganese ore and a perovskitetype oxide CaMn_(0.5)Ti0_(37)5Fe_(0.125)O_(3)were studied by using a microfluidized bed thermogravimetric analysis(MFBTGA)technology which is based on a realtime mass measurement of fluidizing particles inside a bubbling bed reactor.The chemical stability,kinetics of the oxygen release and uptake reactions and fluidization property were investigated and the experimental data measured by MFBTGA were compared with the results in a regular TGA instrument(TGA Q500).The regular TGA Q500 results show the reactivity of both the manganese ore and perovskite oxide are stable for multi cycles,and the oxygen uncoupling capacity of the manganese ore is~1.2%(mass)which is~2 times higher than that of the perovskite oxide.However,the experimental results from the MFBTGA indicated that there is a serious agglomeration for the manganese ore.A very important finding is that the reaction rate of oxygen release and oxygen uptake of the perovskite oxide measured by the MFBTGA are~2 and~4 times faster than that of testedby the TGA Q500.We can conclude that MFBTGA is a very useful tool to measure the reactivity stability and kinetics of oxygen carriers in highthroughput analysis instead of the regular TGA.

Thermodynamic Analysis and Synthesis Gas Generation by Chemical-Looping Gasification of Biomass with Nature Hematite as Oxygen Carriers

Thermodynamic parameters of chemical reactions in the system were carried out through thermodynamic analysis. According to the Gibbs free energy minimization principle of the system, equilibrium composition of the reactions of chemical-looping gasification (CLG) of biomass with natural hematite (Fe2O3) as oxygen carrier were analyzed using commercial software of HSC Chemistry 5.1. The feasibility of the CLG of biomass with hematite was experimental verified in a lab-scale bubbling fluidized bed reactor using argon as fluidizing gas. It was indicated the experimental results were consistent with the theoretical analysis. The presence of oxygen carrier gave a significant effect on the biomass conversion and improved the synthesis gas yield obviously. It was observed that the gas content of CO and H2 was over 70% in CLG of biomass. The reduced hematite particles mainly existed in form of FeO. It was showed that the reduction of natural hematite with biomass proceeds in a stepwise manner from Fe2O3 →Fe3O4→ FeO. Reduction product of natural hematite can be restored the lattice oxygen by oxidation with air.

Syngas production from chemical looping reforming of ethanol over iron-based oxygen carriers: Theoretical analysis and experimental investigation

Chemical looping reforming(CLR)is a recent trend for syngas production,which has several merits compared to the conventional manner.One of the most important issues for CLR is to find low-cost material as oxygen carriers,so iron is a promising candidate.This paper contributes to testing the thermodynamic ability of iron-based oxygen carrier for chemical looping reforming of ethanol(CLRE).Iron thermodynamically investigated in temperature 100–1300℃and excess oxygen number(φ)0–4.It was found that the temperature andφhave an apparent effect on the gaseous composition produced from the process.Increases in temperature within the range of 100–1300℃enhanced syngas generated and reduced coke formation and CH4.Whereas,increasedφ,particularly at higher temperatures,had also enhanced syngas production as well as reduced coke formation.However,increasingφfor values beyond one had decreased syngas and not significantly reduced coke deposition.Moreover,an experimental investigation was carried out in a fixed bed reactor for more in-depth verification of iron ability as an oxygen carrier through using magnetite ore(mainly Fe3O4).It found that the effect of temperature on syngas production was consistent with that calculated thermodynamically,as syngas increased with raising the temperature through the CLRE.

Performance of Ni-based, Fe-based and Co-based Oxygen Carriers in Chemical-Looping Hydrogen Generation

Ni-based, Fe-based and Co-based oxygen carriers with perovskite oxides used as the supports were prepared by citric acid complexation method, The oxygen carriers were characterized by thermal analysis, H2-temperature-programmed reduction and X-ray diffraction methods. Performance tests were evaluated through Chemical-Looping Hydrogen Genera- tion in a fixed-bed reactor operating at atmospheric pressure. The characterization results showed that all samples were composed of metal oxides and perovskite oxides. Performance results indicated that CH4 conversion over the oxygen car- riers decreased in the lbllowing order： NiO/LaNiO3〉Co203/LaCoO3〉Fe203/LaFeO3. The ability of NiO/LaNiO3 and F%O3/ LaFeO3 to decompose water was stronger than that of Co203/LaCoO3 as evidenced by our experiments. H2 amounting to 80 mL upon reacting on methane in every cycle could be completely oxidized by NiO/LaNiO3 at 900℃ in the period from the third cycle to the eighth cycle.