Cell-free biocatalysis coupled with photo-catalysis and electro-catalysis: Efficient CO_(2)-to-chemical conversion

The increasing atmospheric carbon dioxide (CO_(2)) concentration has exposed a series of crises in the earth's ecological environment.How to effectively fix and convert carbon dioxide into products with added value has attracted the attention of many researchers.Cell-free enzyme catalytic system coupled with electrical and light have been a promising attempt in the field of biological carbon fixation in recent years.In this review,the research progresses of photoenzyme catalysis,electroenzyme catalysis and photo-electroenzyme catalysis for converting carbon dioxide into chemical products in cell-free systems are systematically summarized.We focus on reviewing and comparing various coupling methods and principles of photoenzyme catalysis and electroenzyme catalysis in cell-free systems,especially the materials used in the construction of the coupling system,and analyze and point out the characteristics and possible problems of different coupling methods.Finally,we discuss the major challenges and prospects of coupling physical signals and cell-free enzymatic catalytic systems in the field of CO_(2) fixation,suggesting possible strategies to improve the carbon sequestration capacity of such systems.

Non-Gaussian quantum states generated via quantum catalysis and their statistical properties

A new kind of non-Gaussian quantum catalyzed state is proposed via multiphoton measurements and two-mode squeezing as an input of thermal state.The characteristics of the generated multiphoton catalysis output state depends on the thermal parameter,catalyzed photon number and squeezing parameter.We then analyze the nonclassical properties by examining the photon number distribution,photocount distribution and partial negativity of the Wigner function.Our findings indicate that nonclassicality can be achieved through the implementation of multiphoton catalysis operations and modulated by the thermal parameter,catalyzed photon number and squeezing parameter.

Identification of origin of insulating polymer maneuvered photoredox catalysis

Solid non-conjugated polymers have long been regarded as insulators due to deficiency of delocalizedπelectrons along the molecular chain framework.Up to date,origin of insulating polymer regulated charge transfer has not yet been uncovered.In this work,we unleash the root origin of charge transport capability of insulating polymer in photocatalysis.We ascertain that insulating polymer plays crucial roles in fine tuning of electronic structure of transition metal chalcogenides(TMCs),which mainly include altering surface electron density of TMCs for accelerating charge transport kinetics,triggering the generation of defect over TMCs for prolonging carrier lifetime,and acting as hole-trapping mediator for retarding charge recombination.These synergistic roles contribute to the charge transfer of insulating polymer.Our work opens a new vista of utilizing solid insulating polymers for maneuvering charge transfer toward solar energy conversion.

Ordered mesoporous materials for water pollution treatment:Adsorption and catalysis

To meet the growing emission of water contaminants,the development of new materials that enhance the efficiency of the water treatment system is urgent.Ordered mesoporous materials provide opportunities in environmental processing applications due to their exceptionally high surface areas,large pore sizes,and enough pore volumes.These properties might enhance the performance of materials concerning adsorption/catalysis capability,durability,and stability.In this review,we enumerate the ordered mesoporous materials as adsorbents/catalysts and their modifications in water pollution treatment from the past decade,including heavy metals(Hg^(2+),Pb^(2+),Cd^(2+),Cr^(6+),etc.),toxic anions(nitrate,phosphate,fluoride,etc.),and organic contaminants(organic dyes,antibiotics,etc.).These contributions demonstrate a deep understanding of the synergistic effect between the incorporated framework and homogeneous active centers.Besides,the challenges and perspectives of the future developments of ordered mesoporous materials in wastewater treatment are proposed.This work provides a theoretical basis and complete summary for the application of ordered mesoporous materials in the removal of contaminants from aqueous solutions.

Structure design and electrochemical properties of carbon-based single atom catalysts in energy catalysis:A review

Single atom catalysts(SACs) possessing regulated electronic structure, high atom utilization, and superior catalytic efficiency have been studied in almost all fields in recent years. Carbon-based supporting SACs are becoming popular materials because of their low cost, high electron conductivity, and controllable surface property. At the stage of catalysts preparation, the rational design of active sites is necessary for the substantial improvement of activity of catalysts. To date, the reported design strategies are mainly about synthesis mechanism and synthetic method. The level of understanding of design strategies of carbon-based single atom catalysts is requiring deep to be paved. The design strategies about manufacturing defects and coordination modulation of catalysts are presented. The design strategies are easy to carry out in the process of drawing up preparation routes. The components of carbon-based SACs can be divided into two parts: active site and carbon skeleton. In this review, the manufacture of defects and coordination modulation of two parts are introduced, respectively. The structure features and design strategies from the active sites and carbon skeletons to the overall catalysts are deeply discussed.Then, the structural design of different nano-carbon SACs is introduced systematically. The characterization of active site and carbon skeleton and the detailed mechanism of reaction process are summarized and analyzed. Next, the applications in the field of electrocatalysis for oxygen conversion and hydrogen conversion are illustrated. The relationships between the superior performance and the structure of active sites or carbon skeletons are discussed. Finally, the conclusion of this review and prospects on the abundant space for further promotion in broader fields are depicted. This review highlights the design and preparation thoughts from the parts to the whole. The detailed and systematic discussion will provide useful guidance for design of SACs for readers.

Why the abnormal phenomena of D-band center theory exist?A new BASED theory for surface catalysis and chemistry

Since the D-band center theory was proposed,it has been widely used in the fields of surface chemistry by almost all researchers,due to its easy understanding,convenient operation and relative accuracy.However,with the continuous development of material systems and modification strategies,researchers have gradually found that D-band center theory is usually effective for large metal particle systems,but for small metal particle systems or semiconductors,such as single atom systems,the opposite conclusion to the D-band center theory is often obtained.To solve the issue above,here we propose a bonding and anti-bonding orbitals stable electron intensity difference(BASED)theory for surface chemistry.The newly-proposed BASED theory can not only successfully explain the abnormal phenomena of D-band center theory,but also exhibits a higher accuracy for prediction of adsorption energy and bond length of intermediates on active sites.Importantly,a new phenomenon of the spin transition state in the adsorption process is observed based on the BASED theory,where the active center atom usually yields an unstable high spin transition state to enhance its adsorption capability in the adsorption process of intermediates when their distance is about 2.5Å.In short,the BASED theory can be considered as a general principle to understand catalytic mechanism of intermediates on surfaces.

Cobalt phthalocyanine promoted copper catalysts toward enhanced electro reduction of CO_(2)to C_(2):Synergistic catalysis or tandem catalysis?

The activity and selectivity of electrocatalytic CO_(2)reduction reaction(CO_(2)RR)to C_(2)products on metal catalysts can be regulated by molecular surfactants.However,the mechanism behind it remains elusive and debatable.Herein,copper nanowires(Cu NWs)were fabricated and decorated with cobalt phthalocyanine(CoPc).The electronic interaction between the Cu NWs,CoPc,CO_(2) and CO_(2)RR intermediates were explored by density functional theory(DFT)calculations.It was found that the selectivity and activity of CO_(2)RR towards C_(2)products on Cu NWs were considerably enhanced from 35.2%to 69.9%by surface decoration of CoPc.DFT calculations revealed that CO_(2)RR can proceed in the interphase between Cu substrate and CoPc,and the CO_(2)RR intermediates could synergistically bond with both Cu and Co metal centre in CuNWs-CoPc,which favours the adsorption of CO_(2),CO and CO_(2)RR intermediates,thus reducing the free energy for CO-COcoupling towards C_(2)products.The synergistic interaction was further extended to phthalocyanine(Pc)and other metal phthalocyanine derivatives(MPc),where a relatively weaker synergistic interaction of COintermediates with MPc and Cu substrate and only a slight enhancement of CO_(2)RR towards C_(2) products were observed.This study demonstrates a synergistic catalysis pathway for CO_(2)RR,a novel perspective in interpreting the role of CoPc in enhancing the activity and selectivity of CO_(2)RR on Cu NWs,in contrast to the conventional tandem catalysis mechanism.

Discussion of Misleading on the Interpretation of the Word “Catalysis, Catalyst”

The main idea of this paper is what the resource of the serious error of the widely popular Chemical Reaction Mode catalysis Mechanism-CRMM is. The wrong definition of “catalysis, catalyst” by the catalytic academia boss leads to the wrong interpretation of “catalysis, catalyst” by linguists (Dictionary). The interpretation of “catalysis, catalyst” in a dictionary is misleading. The most fundamental reason for this error is that catalysis experts always believe that catalysts participate in chemical reactions. The result will appear as a series of impossible events. Such as catalysis cyclic reaction, opinions vary intermedium, catalysts repeated decomposition—formation, oxidation-reduction or life and death (enzyme), Sabatier’s principle and Boudart’s principle. The wrong theory leads the research and application of catalysts to the bottomless abyss, and industrial production suffers great losses. Electron Orbital Deformation-Recovere cyclic catalysis Mechanism-EODRM or Electron Cyclic Donate-Adopt catalysis Mechanism-ECDAM shows that the catalytic phenomenon is a physical phenomenon, not a chemical phenomenon, the catalyst does not participate in chemical reactions, only contact is the electron donate-adopt cycle, is the electron orbital deformation recovery cycle Chinese and foreign scholars should change the interpretation on the “catalysis, catalyst”, or add two new words: “contact and contactor”, it is to give up “catalysis, catalyst” altogether.

Recent advancement and future challenges of photothermal catalysis for VOCs elimination:From catalyst design to applications

Photothermal catalysis realizes the synergistic effect of solar energy and thermochemistry,which also has the potential to improve the reaction rate and optimize the selectivity.In this review,the research progress of photothermal catalytic removal of volatile organic compounds(VOCs)by nano-catalysts in recent years is systematically reviewed.First,the fundamentals of photothermal catalysis and the fabrication of catalysts are described,and the design strategy of optimizing photothermal catalysis performance is proposed.Second,the performance for VOC degradation with photothermal catalysis is evaluated and compared for the batch and continuous systems.Particularly,the catalytic mechanism of VOC oxidation is systematically introduced based on experimental and theoretical study.Finally,the future limitations and challenges have been discussed,and potential research directions and priorities are highlighted.A broad view of recent photothermal catalyst fabrication,applications,challenges,and prospects can be systemically provided by this review.

Effects of Catalysis and Separator Functionalization on High-Energy Lithium–Sulfur Batteries:A Complete Review

Lithium–sulfur(Li-S)batteries have the advantages of high theoretical specific capacity(1675 mAh g^(−1)),rich sulfur resources,low production cost,and friendly environment,which makes it one of the most promising next-generation rechargeable energy storage devices.However,the“shuttle effect”of polysulfide results in the passivation of metal lithium anode,the decrease of battery capacity and coulombic efficiency,and the deterioration of cycle stability.To realize the commercialization of Li-S batteries,its serious“shuttle effect”needs to be suppress.The commercial separators are ineffective to suppress this effect because of its large pore size.Therefore,it is an effective strategy to modify the separator surface and introduce functional modified layer.In addition to the blocking strategy,the catalysis of polysulfide conversion reaction is also an important factor hindering the migration of polysulfides.In this review,the principles of separator modification,functionalization,and catalysis in Li-S batteries are reviewed.Furthermore,the research trend of separator functionalization and polysulfide catalysis in the future is prospected.

Sustainable Ammonia Synthesis from Nitrogen and Water by One-Step Plasma Catalysis

Sustainable ammonia synthesis at ambient conditions that relies on renewable sources of energy and feedstocks is globally sought to replace the Haber-Bosch process.Here,using nitrogen and water as raw materials,a nonthermal plasma catalysis approach is demonstrated as an effective powerto-chemicals conversion strategy for ammonia production.By sustaining a highly reactive environment,successful plasma-catalytic production of NH_(3) was achieved from the dissociation of N_(2) and H_(2)O under mild conditions.Plasma-induced vibrational excitation is found to decrease the N_(2) and H_(2)O dissociation barriers,with the presence of matched catalysts in the nonthermal plasma discharge reactor contributing significantly to molecular dissociation on the catalyst surface.Density functional theory calculations for the activation energy barrier for the dissociation suggest that ruthenium catalysts supported on magnesium oxide exhibit superior performance over other catalysts in NH_(3) production by lowering the activation energy for the dissociative adsorption of N_(2) down to 1.07 eV.The highest production rate,2.67 mmol gcat.^(-1) h^(-1),was obtained using ruthenium catalyst supported on magnesium oxide.This work highlights the potential of nonthermal plasma catalysis for the activation of renewable sources to serve as a new platform for sustainable ammonia production.

Design of ZnSe-CoSe heterostructure decorated in hollow N-doped carbon nanocage with generous adsorption and catalysis sites for the reversibly fast kinetics of polysulfide conversion

Although lithium-sulfur batteries(Li SBs)are regarded as one of the most promising candidates for the next-generation energy storage system,the actual industrial application is hindered by the sluggish solid–liquid phase conversion kinetics,severe shuttle effect,and low sulfur loadings.Herein,a zeolitic imidazolate framework(ZIF)derived heterogeneous ZnSe-CoSe nanoparticles encapsulated in hollow N-doped carbon nanocage(ZnSe-CoSe-HNC)was designed by etching with tannic acid as a multifunctional electrocatalyst to boost the polysulfide conversion kinetics in LiSBs.The hollow structure in ZIF ensures large inner voids for sulfur and buffering volume expansions.Abundant exposed ZnSe-CoSe heterogeneous interfaces serve as bifunctional adsorption-catalytic centers to accelerate the conversion kinetics and alleviate the shuttle effect.Together with the highly conductive framework,the ZnSe-CoSeHNC/S cathode exhibits a high initial reversible capacity of 1305.3 m A h g-1at 0.2 C,high-rate capability,and reliable cycling stability under high sulfur loading and lean electrolyte(maintaining at 745 m A h g-1after 200 cycles with a high sulfur loading of 6.4 mg cm-2and a low electrolyte/sulfur ratio of 6μL mg^(-1)).Theoretical calculations have demonstrated the heterostructures of ZnSe-CoSe offer higher binding energy to lithium polysulfides than that of ZnSe or CoSe,facilitating the electron transfer to lithium polysulfides.This work provides a novel heterostructure with superior catalytic ability and hollow conductive architecture,paving the way for the practical application of functional sulfur electrodes.

Tandem catalysis for enhanced CO oxidation over the Bi-Au-SiO_(2)interface

Bimetallic catalysts typically exploit unique synergetic effects between two metal species to achieve their catalytic effect.Understanding the mechanism of CO oxidation using hybrid heterogeneous catalysts is important for effective catalyst design and environmental protection.Herein,we report a Bi-Au/SiO_(2)tandem bimetallic catalyst for the oxidation of CO over the Au/SiO_(2)surface,which was monitored using near-ambient-pressure X-ray photoelectron spectroscopy.The Au-decorated SiO_(2)catalyst exhibited scarce activity in the CO oxidation reaction;however,the introduction of Bi to the Au/SiO_(2)system promoted the catalytic activity.The mechanism is thought to involve the dissociation O_(2)molecules in the presence of Bi,which results in spillover of the O species to adjacent Au atoms,thereby forming Au^(δ+).Further CO adsorption,followed by thermal treatment,facilitated the oxidation of CO at the Au-Bi interface,resulting in a reversible reversion to the neutral Au valence state.Our work provides insight into the mechanism of CO oxidation on tandem surfaces and will facilitate the rational design of other Au-based catalysts.

Ti-Fe_(2)O_(3)/Ni(OH)_(x) as an efficient and durable photoanode for the photoelectrochemical catalysis of PET plastic to formic acid

Photoelectrochemical(PEC) technology provides a promising prospect for the transformation of polyethylene terephthalate(PET) plastic wastes to produce value-added chemicals.The PEC catalytic systems with high activity,selectivity and long-term durability are required for the future up-scaling industrial applications.Herein,we employed the interfacial modification strategy to develop an efficient and stable photoanode and evaluated its PEC activity for ethylene glycol(EG,derived from PET hydrolysate) oxidation to formic acid.The interfacial modification between Fe_(2)O_(3)semiconductor and Ni(OH)xcocatalyst with ultrathin TiO_(x) interlayer not only improved the photocurrent density by accelerating the kinetics of photogenerated charge carriers,but also kept the high Faradaic efficiency(over 95% in 30 h) towards the value-added formic acid product.This work proposes an effective method to promote the PEC activity and enhance the long-term stability of photoelectrodes for upcycling PET plastic wastes.

Designing high-efficiency light-to-thermal conversion materials for solar desalination and photothermal catalysis

Light-to-thermal conversion materials(LTCMs)have been of great interest to researchers due to their impressive energy conversion capacity and wide range of applications in biomedical,desalination,and synergistic catalysis.Given the limited advances in existing materials(metals,semiconductors,π-conjugates),researchers generally adopt the method of constructing complex systems and hybrid structures to optimize performance and achieve multifunctional integration.However,the development of LTCMs is still in its infancy as the physical mechanism of light-to-thermal conversion is unclear.In this review,we proposed design strategies for efficient LTCMs by analyzing the physical process of light-tothermal conversion.First,we analyze the nature of light absorption and heat generation to reveal the physical processes of light-to-thermal conversion.Then,we explain the light-to-thermal conversion mechanisms of metallic,semiconducting andπ-conjugated LCTMs,and propose new material design strategies and performance improvement methods.Finally,we summarize the challenges and prospects of LTCMs in emerging applications such as solar water evaporation and photothermal catalysis.

Cooperative catalysis of Co single atoms and nanoparticles enables selective CAr-OCH_(3) cleavage for sustainable production of lignin-based cyclohexanols

In this work,a dual-size MOF-derived Co catalyst(0.2Co_(1-NPs)@NC)composed of single atoms(Co_(1))and highly dispersed nanoparticles(Co NPs)was prepared by in-situ Zn evaporation for the highperformance conversion of lignin-derived o-methoxyphenols(lignin oil)to cyclohexanols(up to 97%yield)via cascade demethoxylation and dearomatization.Theoretical calculations elaborated that the dual-size Co catalyst exhibited a cooperative effect in the selective demethoxylation process,in which the Co NPs could initially dissociate hydrogen at lower energies while Co1remarkably facilitated the cleavage of the C_(Ar)-OCH_(3)bond.Moreover,the intramolecular hydrogen bonds formed in the omethoxy-containing phenols were found to result in a decrease in the bond energy of the C_(Ar)-OCH_(3)bond,which was more prone to be activated by the dual-size Co sites.Notably,the pre-hydrogenated intermediate(e.g.,2-methoxycyclohexanol from guaiacol)is difficult to undergo demethoxylation,indicating that the selective C_(Ar)-OCH_(3)bond cleavage is a prerequisite for the synthesis of cyclohexanols.The 0.2Co_(1-NPs)@NC catalyst was highly recyclable with a neglect decline in activity during five consecutive cycles.This cooperative catalytic strategy based on the metal size effect opens new avenues for biomass upgrading via enhanced C-O bond cleavage of high selectivity.

Is a catalyst always beneficial in plasma catalysis? Insights from the many physical and chemical interactions

Plasma-catalytic dry reforming of CH_(4)(DRM) is promising to convert the greenhouse gasses CH_(4) and CO_(2) into value-added chemicals, thus simultaneously providing an alternative to fossil resources as feedstock for the chemical industry. However, while many experiments have been dedicated to plasma-catalytic DRM, there is no consensus yet in literature on the optimal choice of catalyst for targeted products,because the underlying mechanisms are far from understood. Indeed, plasma catalysis is very complex,as it encompasses various chemical and physical interactions between plasma and catalyst, which depend on many parameters. This complexity hampers the comparison of experimental results from different studies, which, in our opinion, is an important bottleneck in the further development of this promising research field. Hence, in this perspective paper, we describe the important physical and chemical effects that should be accounted for when designing plasma-catalytic experiments in general, high-lighting the need for standardized experimental setups, as well as careful documentation of packing properties and reaction conditions, to further advance this research field. On the other hand, many parameters also create many windows of opportunity for further optimizing plasma-catalytic systems.Finally, various experiments also reveal the lack of improvement in plasma catalysis compared to plasma-only, specifically for DRM, but the underlying mechanisms are unclear. Therefore, we present our newly developed coupled plasma-surface kinetics model for DRM, to provide more insight in the underlying reasons. Our model illustrates that transition metal catalysts can adversely affect plasmacatalytic DRM, if radicals dominate the plasma-catalyst interactions. Thus, we demonstrate that a good understanding of the plasma-catalyst interactions is crucial to avoiding conditions at which these interactions negatively affect the results, and we provide some recommendations for improvement. For instance, we believe that plasma-catalytic DRM may benefit more from higher reaction temperatures,at which vibrational excitation can enhance the surface reactions.

The Nature of Active Sites for Plasmon-Mediated Photothermal Catalysis and Heat-Coupled Photocatalysis in Dry Reforming of Methane

Solar energy-induced catalysis has been attracting intensive interests and its quantum efficiencies in plasmon-mediated photothermal catalysis(P-photothermal catalysis)and external heat-coupled photocatalysis(E-photothermal catalysis)are ultimately determined by the catalyst structure for photo-induced energetic hot carriers.Herein,different catalysts of supported(TiO_(2)-P25 and Al_(2)O_(3))platinum quantum dots are employed in photo,thermal,and photothermal catalytic dry reforming of methane.Integrated experimental and computational results unveil different active sites(hot zones)on the two catalysts for photo,thermal,and photothermal catalysis.The hot zones of P-photothermal catalysis are identified to be the metal-support interface on Pt/P25 and the Pt surface on Pt/Al_(2)O_(3),respectively.However,a change of the active site to the Pt surface on Pt/P25 is for the first time observed in E-photothermal catalysis(external heating temperature of 700℃).The hot zones contribute to the significant enhancements in photothermal catalytic reactivity against thermocatalysis.This study helps to understand the reaction mechanism of photothermal catalysis to exploit efficient catalysts for solar energy utilization and fossil fuels upgrading.

Review on Metal-Acid Tandem Catalysis for Hydrogenative Rearrangement of Furfurals to C_(5) Cyclic Compounds

Hydrogenative rearrangement of biomas s-derived furfurals(furfural and 5-hydroxymethyl furfural) to C_(5) cyclic compounds(such as cyclopentanones and cyclopentanols) offers an expedient reaction route for acquiring O-containing value-added chemicals thereby replacing the traditional petroleum-based approaches.The scope for developing efficient bifunctional catalysts and establishing mild reaction conditions for upgrading furfurals to cyclic compounds has stimulated immense deliberation in recent years.Extensive efforts have been made toward developing catalysts for multiple tandem conversions,including those with various metals and supports.In this scientific review,we aim to summarize the research progress on the synergistic effect of the metal-acid sites,including simple metal-supported acidic supports,adjacent metal acid sites-supported catalysts,and in situ H_(2)-modified bifunctional catalysts.Distinctively,the catalytic performance,catalytic mechanism,and future challenges for the hydrogenative rearrangement are elaborated in detail.The methods highlighted in this review promote the development of C_(5) cyclic compound synthesis and provide insights to regulate bifunctional catalysis for other applications.