Ultrafast dynamics of femtosecond laser-induced high spatial frequency periodic structures on silicon surfaces

Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.

Phase field model for electric-thermal coupled discharge breakdown of polyimide nanocomposites under high frequency electrical stress

In contrast to conventional transformers, power electronic transformers, as an integral component of new energy power system, are often subjected to high-frequency and transient electrical stresses, leading to heightened concerns regarding insulation failures. Meanwhile, the underlying mechanism behind discharge breakdown failure and nanofiller enhancement under high-frequency electrical stress remains unclear. An electric-thermal coupled discharge breakdown phase field model was constructed to study the evolution of the breakdown path in polyimide nanocomposite insulation subjected to high-frequency stress. The investigation focused on analyzing the effect of various factors, including frequency, temperature, and nanofiller shape, on the breakdown path of Polyimide(PI) composites. Additionally, it elucidated the enhancement mechanism of nano-modified composite insulation at the mesoscopic scale. The results indicated that with increasing frequency and temperature, the discharge breakdown path demonstrates accelerated development, accompanied by a gradual dominance of Joule heat energy. This enhancement is attributed to the dispersed electric field distribution and the hindering effect of the nanosheets. The research findings offer a theoretical foundation and methodological framework to inform the optimal design and performance management of new insulating materials utilized in high-frequency power equipment.

A critical review of wheel/rail high frequency vibration-induced vibration fatigue of railway bogie in China

Purpose–This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.Design/methodology/approach–Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators.Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration.This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration,including a brief introduction of short-pitch irregularities,associated high frequency vibration in railway bogie,typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.Findings–The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms.The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components.The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure,and the fatigue crack usually initiates from the defect of the weld seam.Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities.The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment,and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.Originality/value–The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

A high frequency vibration compensation approach for ultrahigh resolution SAR imaging based on sinusoidal frequency modulation Fourier-Bessel transform

Ultrahigh resolution synthetic aperture radar(SAR)imaging for ship targets is significant in SAR imaging,but it suffers from high frequency vibration of the platform,which will induce defocus into SAR imaging results.In this paper,a novel compensation method based on the sinusoidal frequency modulation Fourier-Bessel transform(SFMFBT)is proposed,it can estimate the vibration errors,and the phase shift ambiguity can be avoided via extracting the time frequency ridge consequently.By constructing the corresponding compensation function and combined with the inverse SAR(ISAR)technique,well-focused imaging results can be obtained.The simulation imaging results of ship targets demonstrate the validity of the proposed approach.

Research on Inter-turn Short-circuit Fault Diagnosis Method Based on High Frequency Voltage Residual for PMSM

Inter-turn fault is a serious stator winding short-circuit fault of permanent magnet synchronous machine(PMSM). Once it occurs, it produces a huge short-circuit current that poses a great risk to the safe operation of PMSM. Thus, an inter-turn short-circuit fault(ITSCF) diagnosis method based on high frequency(HF) voltage residual is proposed in this paper with proper HF signal injection. First, the analytical models of PMSM after the ITSCF are deduced. Based on the model, the voltage residual at low frequency(LF) and HF can be obtained. It is revealed that the HF voltage residual has a stronger ITSCF detection capability compared to the LF voltage residual. To obtain optimal fault signature, a 3-phase symmetrical HF voltage is injected into the machine drive system, and the HF voltage residuals are extracted. The fault indicator is defined as the standard deviation of the 3-phase HF voltage residuals. The effectiveness of the proposed ITSCF diagnosis method is verified by experiments on a triple 3-phase PMSM. It is worth noting that no extra hardware equipment is required to implement the proposed method.

DISCHARGE CHANNEL GROWTH IN MICRO EDM OF HIGH FREQUENCY PULSE

The influences of intense magnetic pinch effect caused by electromagnetic field with high frequency on discharge channel expansion and plasma configuration change are discussed. The change of Lorentz force exerting on charged particles in discharge channel is calculated under the electromagnetic field with high frequency. Through the theoretical analysis and experimental study, the forming process of discharge channel is conjectured. And it is considered that the changes of discharge channel, such as the decrease of diameter and increase of energy density, coming from the intense magnetic pinch effect in high frequency electromagnetic field, are the main reasons for a series of special phenomena on the machined surface in micro EDM.

Novel forward mode AC/AC converters with high frequency link

A circuit configuration and a circuit topologic family of the novel forward mode AC/AC converters with high frequency link are presented. The circuit configuration is constituted of input cycloconverter, high frequency transformer, output cycloconverter, input and output filters. The circuit topologic family includes eight circuit topologies, such as full-bridge-full-wave mode, etc. The bi-polarity phase-shifted control strategy and steady principles are thoroughly investigated. The output characteristics are obtained. By using the bi-polarity phase-shifted control strategy with phase-shifted control between the output cycloconveter and the input cycloconverter, commutation overlap period of the output cycloconverter, and polarity selection of the output filtering inductance current and the input voltage, the leakage inductance energy and the output filtering inductance current are naturally commutated, and surge voltage and surge current of the cycloconverters are overcome. The converters have such advantages as simple topology, two-stage power conversions(LFAC/HFAC/LFAC), bi-directional power flow, high frequency electrical isolation, good output waveforms, and strong ability to stabilize voltage. The converters lay key technical foundation on a new-type of regulated sinusoidal AC power supplies and electronic transformers. The correction and advancement of the converters are well verified by a principle test.

Study on GNi-WC25 Coating by High Frequency Induction Cladding

Process and mechanism of high frequency were studied in this paper by means of cold attachment for the preparation of GNi WC25 coating . The results show its special distribution law of eddy current while the magnetic transition temperature and electric resistivity of the coating have been measured .Wear resistance of the high frequency induction coating has an advantage over those of laser cladding coating and oxygen acetylene spraying fusing coating . Moreover , the GNi WC25 coating by high frequency induction cladding has smooth surface and even microstructure.

A NOVEL AERONAUTICAL STATIC INVERTER WITH HIGH FREQUENCY PULSE DC LINK

A new combined soft switching technique and a novel topology of aeronautical static inverter with high frequency pulse dc link are proposed in this paper, namely an electrical isolated converter can realize soft switching of two stage cascade converters. It lays technical foundation for high power density, high efficiency and low cost aeronautical static inverter. The operation and design approach of this topology are carefully analyzed and studied. The validity of this topology is verified by simulation and test.

A Low-Power High-Frequency CMOS Peak Detector

A low-power,high-frequency CMOS peak detector is proposed. This detector can detect RF signal and base-band signal peaks. The circuit is designed using SMIC 0.35μm standard CMOS technology. Both theoretical calculations and post simulations show that the detection error is no more than 2% for various temperatures and processes when the input amplitude is larger than 400mV. The detection bandwidth is up to 10GHz, and its static current dissipation is less than 20μA.

High frequency components in avian vocalizations

Ultrasonic communication in vertebrates is attracting increasing research interest.To determine if ultrasonic vocalization is common in birds,we recorded their vocalizations with ultrasound detectors in the Dongzhai National Nature Reserve of Henan Province,China.We found varying degrees of high frequency components in the vocalizations of 14 species and in several of these species,the frequency of harmonics was up to the range of ultrasound.We suggest that more studies are required to determine whether the high frequency components in avian vocalizations have functions and what these functions are.In addition,the ability of birds to hear sounds in the high frequency range also requires re-examination.

Early Detection of Lesions of Dorsal Artery of Foot in Patients with Type 2 Diabetes Mellitus by High-frequency Ultrasonography

This study evaluated the value of high-frequency ultrasonograpy for early detection of dorsal artery of foot in patients with type 2 diabetes mellitus （MD）. Eighty subjects including 40 patients with type 2 MD （T2DM group） and 40 healthy volunteers （NC group） were recruited. The intima-media thickness （IMT）, the inner diameter and the perfusion of dorsal artery of foot were measured by using high-frequency ultrasonograpy. Meanwhile, the parameters of vascular elasticity, including stiffness parameter （]3）, pressure-strain elastic modulus （Ep）, arterial compliance （AC）, augment index （AI）, and pulse wave conducting velocity （PWV]3） were detected by means of echo-tracking technique. The results showed that no significant difference was found in the IMT, systolic diameter （Ds）, diastolic diameter （Dd） and peak systolic velocity （PSV） between T2DM and NC groups. Ep and PWVβ were increased, and AC was decreased in T2DM group as compared with those in NC group with the differences being significant （P〈0.05 for all）. There was no significant difference in β and AI between T2DM and NC groups. It was concluded that high-frequency ultra- sonography in combination with echo-tracking technique is sensitive and non-invasive, and can be used for early detection of sclerosis of the lower extremity artery in patients with type 2 MD.

STUDY ON TEMPERATURE FIELD INDUCED IN HIGH FREQUENCY INDUCTION HEATING

A mathematical model was established for the temperature field developed during high frequency induction heating （HFIH） by Maxwell＇s equations. It required solving the coupled equations of the electromagnetic and temperature fields. The numerical simudation was performed using FEMLAB. The comparison of the calculations using the proposed model with experimental results showed a very good correlation. The effects of the heating parameters in high frequency induction such as the distance between the plate and the coil, the applied current, the frequency, and the turns of the coil on the temperature profiles developed in the plate were also discussed using the established model.

Rock fragmentation mechanisms and an experimental study of drilling tools during high-frequency harmonic vibration

Resonance drilling is a new technology, still at the laboratory stage. It has great potential to improve rock fragmentation efficiency. We analyzed the amplitude-frequency characteristics of steady- state mechanical vibration excited by harmonic vibration in rocks and an apparatus was built to achieve high fi＇equency vibration of rock. The influence of rock drillability, rotary speed, excitation frequency, and other parameters on the rate of penetration （ROP） in resonance drilling was analyzed. The results show that the rock drillability decreased with an increase in excitation frequency. When drilling with a large size drill bit, the ROP increased with excitation frequency. The ROP reached a maximum value at the resonant frequency of the rock. Tile ROP of the bit increased linearly with rotary speed when no vibration was applied on the rock and increased approximately exponentially when harmonic vibration was applied. In addition, the resonant frequency of the rock was changing during the process of rock fi＇agmentation, so in order to achieve tile desired resonance of the rock, it is necessary to detemaine an appropriate hamlonic vibration excitation frequency.

Effect of High Frequency Oscillatory Ventilation on EVLW and Lung Capillary Permeability of Piglets with Acute Respiratory Distress Syndrome Caused by Pulmonary and Extrapulmonary Insults

The effect of high frequency oscillatory ventilation（HFOV） at early stage on hemodynamic parameters, extravascular lung water（EVLW）, lung capillary permeability, CC16 and s ICAM-1 in piglets with pulmonary or extrapulmonary acute respiratory distress syndrome（ARDS） was explored. Central vein pressure（CVP） and pulse indicator continuous cardiac output（Pi CCO） were monitored in 12 anesthetized and intubated healthy piglets. Pulmonary ARDS（ARDSp） and extrapulmonary ARDS（ARDSexp） models were respectively established by lung lavage of saline solution and intravenous injection of oleic acid. Then the piglets received HFOV for 4 h. EVLW index（EVLWI）, EVLW/intratroracic blood volume（ITBV） and pulmonary vascular permeability index（PVPI） were measured before and after modeling（T0 and T1）, and T2（1 h）, T3（2 h）, T4（3 h） and T5（4 h） after HFOV. CC16 and s ICAM-1 were also detected at T1 and T5. Results showed at T1, T3, T4 and T5, EVLWI was increased more significantly in ARDSp group than in ARDSexp group（P〈0.05）. The EVLWI in ARDSp group was increased at T1（P=0.008）, and sustained continuously within 2 h（P=0.679, P=0.216）, but decreased at T4（P=0.007） and T5（P=0.037）. The EVLWI in ARDSexp group was also increased at T1（P=0.003）, but significantly decreased at T3（P=0.002） and T4（P=0.019）. PVPI was increased after modeling in both two groups（P=0.004, P=0.012）, but there was no significant change within 4 h（T5） under HFOV in ARDSp group, while PVPI showed the increasing trends at first, then decreased in ARDSexp group after HFOV. The changes of EVLW/ITBV were similar to those of PVPI. No significant differences were found in ΔEVLWI（P=0.13）, ΔPVPI（P=0.28） and ΔEVLW/ITBV between the two groups（P=0.63）. The significant decreases in both CC16 and s ICAM-1 were found in both two groups 4 h after HFOV, but there was no significant difference between the two groups. It was concluded that EVLWI and lung capillary permeability were markedly increased in ARDSp and ARDSexp groups. EVLW could be decreased 4 h after the HFOV treatment. HFOV, EVLW/ITBV and PVPI were increased slightly at first, and then decreased in ARDSexp group, while in ARDSp group no significant difference was found after modeling. No significant differences were found in the decreases in EVLW and lung capillary permeability 4 h after HFOV.

Composition of high frequency ambient noise from cross-correlation:A case study using a small aperture array

Long-time cross correlation of ambient noise has been proved as a powerful tool to extract Green＇s function between two receivers. The study of composition of ambient noise is important for a better understanding of this method. Previous studies confirm that ambient noise in the long period （3 s and longer） mostly consists of surface wave, and 0.25-2.5 s noise consists more of body waves. In this paper, we perform cross correlation processing at much higher frequency （30-70 Hz） using ambient noise recorded by a small aperture array. No surface waves emerge from noise correlation function （NCF）, but weak P waves emerge. The absence of surface wave in NCF is not due to high attenuation since surface waves are strong from active source, therefore probably the high ambient noise mostly consists of body wave and lacks surface wave. Origin of such high frequency body waves in ambient noise remains to be studied.

Wave height measurement in the Taiwan Strait with a portable high frequency surface wave radar

As an important equipment for sea state remote sensing, high frequency surface wave radar （HFSWR） has received more and more attention. The conventional method for wave height inversion is based on the ratio of the integration of the second-order spectral continuum to that of the first-order region, where the strong external noise and the incorrect delineation of the first- and second-order Doppler spectral regions due to spectral aliasing are two major sources of errors in the wave height. To account for these factors, two more indices are introduced to the wave height estimation, i.e., the ratio of the maximum power of the second-or- der continuum to that of the Bragg spectral region （RSCB） and the ratio of the power of the second harmonic peak to that of the Bragg peak （RSHB）. Both indices also have a strong correlation with the underlying wave height. On the basis of all these indices an empirical model is proposed to estimate the wave height. This method has been used in a three-months long experiment of the ocean state measuring and analyzing ra- dar, type S （OSMAR-S）, which is a portable HFSWR with compact cross-loop/monopole receive antennas developed by Wuhan University since 2006. During the experiment in the Taiwan Strait, the significant wave height varied from 0 to 5 m. The significant wave heights estimated by the OSMAR-S correlate well with the data provided by the Oceanweather Inc. for comparison, with a correlation coefficient of 0.74 and a root mean square error （RMSE） of 0.77 m. The proposed method has made an effective improvement to the wave height estimation and thus a further step toward operational use of the OSMAR-S in the wave height extraction.

High-frequency Ultrasound Evaluation of Effects of Early Treatment with Metoprolol on Myocardial Inflammatory Cytokine Expression in Rats with Acute Myocardial Infarction

This study evaluated the effects of early treatment with β-adrenergic blocker metoprolol on ventricular remodeling and function after acute myocardial infarction (AMI) by using high frequency ultrasound.The relationship between the efficacy and the expression level of cardiac myocardial inflammatory cytokine was examined in rats.The rat model of AMI was induced by ligating the left ante-rior descending artery.The surviving rats were randomly assigned to two experimental groups:MI control (MI) group and MI metoprolol (MI-B) group,with the rats undergoing sham operation serving as normal control (Sham).MI-B group was given metoprolol for 4 weeks (refer to the CCS-2 protocol) and the other two groups received equal volume of saline via intragastric (i.g.) administation.The ventricular remodeling and function were evaluated by high frequency ultrasound 4 weeks after the treatment.Then all rats were sacrificed for pathological examination and immunohistochemistrical detection of inflammatory cytokines,including IL-1β,IL-6,IL-10 and TNF-α.Compared with the MI group,the left ventricular end-systolic dimension,end-diastolic dimension,end-systolic volume and end-diastolic volume of the MI-B group were significantly decreased (P<0.01),while the left ventricular anterior wall end-diastolic thickness,ejection fraction and fractional shortening were obviously increased (P<0.01).The conspicuous improvement in the left ventricular morphology and function was coincident with the markedly reduced TNF-α and IL-1β expression and the increased IL-10 expression.We are led to conclude that early metoprolol treatment for AMI can regulate myocardial inflammatory cytokine expression to improve cardiac function and the underlying mechanism might be that it decreases the level of pro-inflammatory cytokines and increases the level of its anti-inflammatory counterparts in cardiac myocytes.Our study also showed that echocardiography is a useful technique for the structural and functional assessment of left ventricle after acute myocardial infarction.

High Frequency Communication Network with Diversity: System Structure and Key Enabling Techniques

High frequency sky wave communication suffers from poor performance including poor link quality and low link success rate. To enhance performance, diversity technology is proposed in the high frequency communication network(HFCN) in this paper.First, we present the benefits and the challenges by introducing diversity technology into the existing HFCN. Secondly, to exploit the benefits fully and overcome the challenges, we propose a system structure suitable for deploying diversity technology in HFCN in large scale,based on the cloud radio access network and software defined network. Moreover, we present a general structure for the real-time updating frequency management system that plays a more important role especially when resource consuming(e.g., frequency) diversity technology is deployed. Thirdly, we investigate the key techniques enabling diversity technology deployment. Finally, we point out the future research directions to help the HFCN with diversity work more efficiently and intelligently.

Surface tidal currents in the open sea area to the east of the Zhoushan Islands measured with high frequency surface wave radar

Based on the quasi-harmonic analysis of 11 d vector ocean currents obtained from two high frequency sur- face wave radars located at Zhujiajian Island and Shengshan Island, the spatial distribution characteristics of surface tidal currents in the open sea area to the east of the Zhoushan Islands of Zhejiang Province, China are studied. The following conclusions are drawn from the analysis： the tidal current pattern in the open sea area to the east of Zhoushan Islands is primarily regular semidiurnal, which is significantly affected by the shallow water constituents. The directions of the major axes of tidal current ellipses of M2 lie approx- imately in the NW-SE direction. With the increasing of distance away from the coast, the directions of the tidal current ellipses gradually shift toward the E-W direction. The tidal currents are mainly reversing cur- rents. The spatial distribution of probable maximum current velocities decreases gradually from northeast to southwest which is basically in accordance with the spatial distribution of measured maximum current velocities. The residual currents near the coast are larger than those far away from the coast. The directions of the residual currents are basically north by east, and the angle to the due north increases gradually with the increasing distance away from the coast. The topography shows a certain impact on the spatial distri- bution of shallow water constituents, the rotation of tidal currents, the probable maximum currents and the residual currents.