The oxidation pathway and kinetics of titania slag powders in air were analyzed using differential scanning calorimetry(DSC)and thermogravimetry(TG).The oxidation pathway of titania slag powder in air was divided into...The oxidation pathway and kinetics of titania slag powders in air were analyzed using differential scanning calorimetry(DSC)and thermogravimetry(TG).The oxidation pathway of titania slag powder in air was divided into three stages according to their three exothermic peaks and three corresponding mass gain stages indicated by the respective non-isothermal DSC and TG curves.The isothermal oxidation kinetics of high titania slag powders of different sizes were analyzed using the ln-ln analysis method.The results revealed that the entire isothermal oxidation process comprises two stages.The kinetic mechanism of the first stage can be described as f(α) = 1.77(1-α) [-ln (1-α)]^((1.77-1)/1.77),f(α)= 1.97(1-α) [-ln (1-α)]^((1.97-1)/1.97),and f (α) = 1.18(1-α) [-ln (1-α)]^((1.18-1)/1.18).The kinetic mechanism of the second stage for all samples can be described as f (α)=1.5(1-α)^(2/3)[1-(1-α)^(1/3)]^(-1).The activation energies of titania slag powders with different sizes(d_(1)<0.075 mm,0.125 mm<d_(2)<0.150 mm,and 0.425 mm<d_(3)<0.600 mm)for different reaction degrees were calculated.For the given experimental conditions,the rate-controlling step in the first oxidation stage of all the samples is a chemical reaction.The rate-controlling steps of the second oxidation stage are a chemical reaction and internal diffusion(for powders d_(1)<0.075 mm)and internal diffusion(for powders 0.125 mm<d_(2)<0.150 mm and 0.425 mm<d_(3)<0.600 mm).展开更多
By means of energy-dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM) analysis, the phase structure characteristics of high titanium slag were analyzed. Through the single factor and the orthog...By means of energy-dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM) analysis, the phase structure characteristics of high titanium slag were analyzed. Through the single factor and the orthogonal experiment methods, the effects of material particle size, mass ratio of acid to ore, roasting temperature, and roasting time on the acidolysis ratio of TiO<sub>2</sub> during the process of roasting high titanium slag with concentrated sulfuric acid were systematically investigated. The results show that the sequence of each factor affecting the acidolysis ratio of TiO<sub>2</sub> is: mass ratio of acid to ore, roasting time, and roasting temperature. The optimum technological conditions are obtained as mass ratio of acid to ore of 2.1, roasting temperature of 310°C, roasting time of 75min, and material particle size of 45–53μm. The acidolysis ratio of TiO<sub>2</sub> is over 96% under the optimum conditions. The roasting process is proved to be significant in the exploitation and utilization of high titanium slag. The advantages of the proposed roasting process are of high efficiency, low power consumption, and minimum pollution.展开更多
基金This work was financially supported by the National Key Research and Development Program of China(No.2018YFC1900500)Graduate Research and Innovation Foundation of Chongqing,China(No.CYB17002).
文摘The oxidation pathway and kinetics of titania slag powders in air were analyzed using differential scanning calorimetry(DSC)and thermogravimetry(TG).The oxidation pathway of titania slag powder in air was divided into three stages according to their three exothermic peaks and three corresponding mass gain stages indicated by the respective non-isothermal DSC and TG curves.The isothermal oxidation kinetics of high titania slag powders of different sizes were analyzed using the ln-ln analysis method.The results revealed that the entire isothermal oxidation process comprises two stages.The kinetic mechanism of the first stage can be described as f(α) = 1.77(1-α) [-ln (1-α)]^((1.77-1)/1.77),f(α)= 1.97(1-α) [-ln (1-α)]^((1.97-1)/1.97),and f (α) = 1.18(1-α) [-ln (1-α)]^((1.18-1)/1.18).The kinetic mechanism of the second stage for all samples can be described as f (α)=1.5(1-α)^(2/3)[1-(1-α)^(1/3)]^(-1).The activation energies of titania slag powders with different sizes(d_(1)<0.075 mm,0.125 mm<d_(2)<0.150 mm,and 0.425 mm<d_(3)<0.600 mm)for different reaction degrees were calculated.For the given experimental conditions,the rate-controlling step in the first oxidation stage of all the samples is a chemical reaction.The rate-controlling steps of the second oxidation stage are a chemical reaction and internal diffusion(for powders d_(1)<0.075 mm)and internal diffusion(for powders 0.125 mm<d_(2)<0.150 mm and 0.425 mm<d_(3)<0.600 mm).
基金financially supported by the National Natural Science Foundation of China(Nos.61372195 and61304069)the National Basic Research Program of China(No.2007CB613603)
文摘By means of energy-dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM) analysis, the phase structure characteristics of high titanium slag were analyzed. Through the single factor and the orthogonal experiment methods, the effects of material particle size, mass ratio of acid to ore, roasting temperature, and roasting time on the acidolysis ratio of TiO<sub>2</sub> during the process of roasting high titanium slag with concentrated sulfuric acid were systematically investigated. The results show that the sequence of each factor affecting the acidolysis ratio of TiO<sub>2</sub> is: mass ratio of acid to ore, roasting time, and roasting temperature. The optimum technological conditions are obtained as mass ratio of acid to ore of 2.1, roasting temperature of 310°C, roasting time of 75min, and material particle size of 45–53μm. The acidolysis ratio of TiO<sub>2</sub> is over 96% under the optimum conditions. The roasting process is proved to be significant in the exploitation and utilization of high titanium slag. The advantages of the proposed roasting process are of high efficiency, low power consumption, and minimum pollution.
基金Project(FMRU2007K10)supported by the Open Research Fund of Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education,China
基金Project (2007CB613504) supported by the National Basic Research Program of ChinaProject (20070145041) supported by the Specialized Research Fund for the Doctoral Program of Higher Education, China
文摘针对攀钢高钛型高炉渣 ,采用高温熔滴炉模拟焦炭反应器研究高钛型高炉渣熔融滴落穿过焦炭层时渣焦、渣气反应过程 ,生成物与焦炭的粘结情况 ,滴落渣的成分和性能 ,并探讨渣钛分离的影响因素。通过实验得出 :焦炭层滞留有大量橘红色和古铜色的 Ti C、 Ti N;滴落渣中的 Ti O2 降到了 9.0 %左右。