The effect of a high magnetic field up to 30T on phase transformation temperature and microstructure of Fe-based alloys has been reviewed. A high magnetic field accelerates ferrite transformation, changes the morpho...The effect of a high magnetic field up to 30T on phase transformation temperature and microstructure of Fe-based alloys has been reviewed. A high magnetic field accelerates ferrite transformation, changes the morphology of the transformed microstructures and increases the A3 and A1 temperature. In a magnetic field of 30T, the A1 temperature increases by about 37.1℃ for Fe-0.8C, the A3 temperature for pure Fe increases by about 33.1℃. The measured transformation temperature data are not consistent with calculation results using Weiss molecular field theory. Ferrite grains are elongated and aligned along the direction of magnetic field in Fe-0.4C and Fe-0.6C alloys by ferrite transformation, but elongated and aligned structure was not found in pure Fe, Fe-0.05C alloy and Fe-1.5Mn-0.11C-0.1V alloy.展开更多
Ni54Mn25Ga21 alloy was prepared to investigate the microstructure, martensitic transformation and high-temperature shape-memory effect. Ni54Mn25Ga21 alloy exhibits single phase of non-modulated martensite with tetrago...Ni54Mn25Ga21 alloy was prepared to investigate the microstructure, martensitic transformation and high-temperature shape-memory effect. Ni54Mn25Ga21 alloy exhibits single phase of non-modulated martensite with tetragonal structure at room temperature. Its martensitic start temperature Ms, martensitic finish temperature Mf on cooling, and austenitic start temperature As, austenitic finish temperature Af on heating are 260.2, 237.8, 262.5 and 287.8 ℃, respectively. The compressive strength and strain of Ni54Mn25Ga21 single crystal were measured to be 845 MPa and 20.5%, respectively, with compressive axis along the growth direction of the rods. An excellent shape-memory strain of 6.1%, which is the best performance among high-temperature shape-memory alloys up to the present, is obtained when prestrained to 8%.展开更多
In the present work,the microstructure features,martensitic transformation,mechanical properties and strain recovery characteristics of Ti-Ta based shape memory alloys were tailored by changing Hf contents.The single...In the present work,the microstructure features,martensitic transformation,mechanical properties and strain recovery characteristics of Ti-Ta based shape memory alloys were tailored by changing Hf contents.The singleα"martensite phase was dominated in Ti-Ta alloy with 2 at.%H f.Upon Hf content exceeded2 at.%,βphase started to appear.Moreover,the amount ofβphase gradually increased with Hf content increasing.The martensitic transformation temperatures continuously decreased with the increased Hf content,which was attributed to the rising of valence electron concentration.Meanwhile,Hf addition improved the thermal cycling stability of Ti-Ta alloys due to the suppression ofωprecipitation.The yield stress of Ti-Ta based alloys firstly decreased and then increased with Hf content increasing.In addition,the completely recoverable strain of 4%can be obtained in Ti-Ta alloy with 6 at.%Hf as a consequence of the higher critical stress for dislocation slip.Besieds,the Ti-Ta based alloy containing 8 at.%Hf had the superior superelasticity behavior with the fully recoverable strain of 2%at room temperature.展开更多
In the present study,the in-situ TiB whisker was introduced into the Ti-Ni-Hf shape memory alloy composite by the in-situ reaction of the Ti-Ni-Hf alloy powder and TiB2 powders.The(Ti,Hf)2 Ni phase also precipitated,a...In the present study,the in-situ TiB whisker was introduced into the Ti-Ni-Hf shape memory alloy composite by the in-situ reaction of the Ti-Ni-Hf alloy powder and TiB2 powders.The(Ti,Hf)2 Ni phase also precipitated,accompanied with the formation of TiB phase.Moreover,the residual TiB2 particles can be observed,as the TiB2 content was higher than 0.7 wt%.Thereinto,the larger scale reinforcements constituted the quasi-continuous network structure.The smaller scale reinforcements distributed in the interior of the network structure.The two-scale reinforcements showed the uniform distribution at macroscopic level and inhomogeneous distribution at microscopic level.The single stage B19?B2 martensitic transformation occurred in the Ti-Ni-Hf composites.In addition,the martensitic transformation temperatures continuously decreased with the increased TiB2 content owing to the compositional and mechanical effect.The moderate TiB2 addition not noly enhanced the matrix strength,but also significantly improved the superelasticity.The excellent superelaticity with the completely recoverable strain of 4%can be obtained in the Ti-Ni-Hf composite containing 0.7 wt%TiB2.展开更多
文摘The effect of a high magnetic field up to 30T on phase transformation temperature and microstructure of Fe-based alloys has been reviewed. A high magnetic field accelerates ferrite transformation, changes the morphology of the transformed microstructures and increases the A3 and A1 temperature. In a magnetic field of 30T, the A1 temperature increases by about 37.1℃ for Fe-0.8C, the A3 temperature for pure Fe increases by about 33.1℃. The measured transformation temperature data are not consistent with calculation results using Weiss molecular field theory. Ferrite grains are elongated and aligned along the direction of magnetic field in Fe-0.4C and Fe-0.6C alloys by ferrite transformation, but elongated and aligned structure was not found in pure Fe, Fe-0.05C alloy and Fe-1.5Mn-0.11C-0.1V alloy.
基金Project(50371005) supported by the National Natural Science Foundation of China
文摘Ni54Mn25Ga21 alloy was prepared to investigate the microstructure, martensitic transformation and high-temperature shape-memory effect. Ni54Mn25Ga21 alloy exhibits single phase of non-modulated martensite with tetragonal structure at room temperature. Its martensitic start temperature Ms, martensitic finish temperature Mf on cooling, and austenitic start temperature As, austenitic finish temperature Af on heating are 260.2, 237.8, 262.5 and 287.8 ℃, respectively. The compressive strength and strain of Ni54Mn25Ga21 single crystal were measured to be 845 MPa and 20.5%, respectively, with compressive axis along the growth direction of the rods. An excellent shape-memory strain of 6.1%, which is the best performance among high-temperature shape-memory alloys up to the present, is obtained when prestrained to 8%.
基金financially supported by the National Natural Science Foundation of China(Nos.51871080,51931004 and 51571073)the Talent Training Program for Shandong Province Higher Educational Youth Innovative Teams(2019)。
文摘In the present work,the microstructure features,martensitic transformation,mechanical properties and strain recovery characteristics of Ti-Ta based shape memory alloys were tailored by changing Hf contents.The singleα"martensite phase was dominated in Ti-Ta alloy with 2 at.%H f.Upon Hf content exceeded2 at.%,βphase started to appear.Moreover,the amount ofβphase gradually increased with Hf content increasing.The martensitic transformation temperatures continuously decreased with the increased Hf content,which was attributed to the rising of valence electron concentration.Meanwhile,Hf addition improved the thermal cycling stability of Ti-Ta alloys due to the suppression ofωprecipitation.The yield stress of Ti-Ta based alloys firstly decreased and then increased with Hf content increasing.In addition,the completely recoverable strain of 4%can be obtained in Ti-Ta alloy with 6 at.%Hf as a consequence of the higher critical stress for dislocation slip.Besieds,the Ti-Ta based alloy containing 8 at.%Hf had the superior superelasticity behavior with the fully recoverable strain of 2%at room temperature.
基金This work was supported financially by the National Natural Science Foundation of China(Nos.51871080 and 51571073).
文摘In the present study,the in-situ TiB whisker was introduced into the Ti-Ni-Hf shape memory alloy composite by the in-situ reaction of the Ti-Ni-Hf alloy powder and TiB2 powders.The(Ti,Hf)2 Ni phase also precipitated,accompanied with the formation of TiB phase.Moreover,the residual TiB2 particles can be observed,as the TiB2 content was higher than 0.7 wt%.Thereinto,the larger scale reinforcements constituted the quasi-continuous network structure.The smaller scale reinforcements distributed in the interior of the network structure.The two-scale reinforcements showed the uniform distribution at macroscopic level and inhomogeneous distribution at microscopic level.The single stage B19?B2 martensitic transformation occurred in the Ti-Ni-Hf composites.In addition,the martensitic transformation temperatures continuously decreased with the increased TiB2 content owing to the compositional and mechanical effect.The moderate TiB2 addition not noly enhanced the matrix strength,but also significantly improved the superelasticity.The excellent superelaticity with the completely recoverable strain of 4%can be obtained in the Ti-Ni-Hf composite containing 0.7 wt%TiB2.
