The influence of zirconium on the resistance to high temperature softening of 6082 Al-Mg-Si alloys has been researched. The softening process of 6082 alloys with Zr and without Zr, isothermally conditioned at 250°...The influence of zirconium on the resistance to high temperature softening of 6082 Al-Mg-Si alloys has been researched. The softening process of 6082 alloys with Zr and without Zr, isothermally conditioned at 250°C, has been investigated. The results show the inclusion of Zr inhibits the decrease of HB in hardness(HB) compared with the alloys without Zr. This is due to the Zr and Al forming coherent dispersoid-A!3Zr, and Al3Zr particles within an Al matrix, which effectively restricts grain boundary movement. A study is also carried out to investigate the changes in resistivity, which occurs during the ageing of alloys containing Zr, compared to those without Zr. It is found that in both cases there is an initial rapid rise in resistivity followed by a slower rise in resistivity as ageing proceeds. The value of resistivity is lower for 6082 alloys with Zr compared with 6082 alloys without Zr; this is explained in terms of the role of Zr in the 6082 alloys.展开更多
Extreme high temperature(EHT)events are among the most impact-related consequences related to climate change,especially for China,a nation with a large population that is vulnerable to the climate warming.Based on the...Extreme high temperature(EHT)events are among the most impact-related consequences related to climate change,especially for China,a nation with a large population that is vulnerable to the climate warming.Based on the latest Coupled Model Intercomparison Project Phase 6(CMIP6),this study assesses future EHT changes across China at five specific global warming thresholds(1.5℃-5℃).The results indicate that global mean temperature will increase by 1.5℃/2℃ before 2030/2050 relative to pre-industrial levels(1861-1900)under three future scenarios(SSP1-2.6,SSP2-4.5,and SSP5-8.5),and warming will occur faster under SSP5-8.5 compared to SSP1-2.6 and SSP2-4.5.Under SSP5-8.5,global warming will eventually exceed 5℃ by 2100,while under SSP1-2.6,it will stabilize around 2℃ after 2050.In China,most of the areas where warming exceeds global average levels will be located in Tibet and northern China(Northwest China,North China and Northeast China),covering 50%-70%of the country.Furthermore,about 0.19-0.44 billion people(accounting for 16%-41%of the national population)will experience warming above the global average.Compared to present-day(1995-2014),the warmest day(TXx)will increase most notably in northern China,while the number of warm days(TX90p)and warm spell duration indicator(WSDI)will increase most profoundly in southern China.For example,relative to the present-day,TXx will increase by 1℃-5℃ in northern China,and TX90p(WSDI)will increase by 25-150(10-80)days in southern China at 1.5℃-5℃ global warming.Compared to 2℃-5℃,limiting global warming to 1.5℃ will help avoid about 36%-87%of the EHT increases in China.展开更多
In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using G...In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using Gleeble-3810 thermal simulator.It is proved that the samples underwent obvious dynamic recrystallization behavior during thermal deformation by microstructure observation of deformed specimens.The size of recrystallized grains increases as the temperature improved and the strain rate decreased.Meanwhile,the net softening rate caused by dynamic recrystallization is determined based on the stress-dislocation relationship.It can be found that the value of net softening rate increases quadratically as the Z parameter decreases,and the dynamic recrystallization net softening rate of CuCrZr alloy and 35CrMo steel are calculated to be 21.9%and 29.8%,respectively.Based on the dynamic recrystallization softening effect proposed,the novel elevated temperature flow constitutive models of two different alloys are proposed,and the related parameters are well defined and solved in detail.The predicted values of the obtained models are agreed well with the experimental values.展开更多
The true stress-sWain relationships of Ti-5A1-2Sn-2Zr-4Mo-4Cr（TC17） alloy with a wide range of strain rates were investigated by tmiaxial quasi-static and dynamic compression tests, respectively. Quasi- static compr...The true stress-sWain relationships of Ti-5A1-2Sn-2Zr-4Mo-4Cr（TC17） alloy with a wide range of strain rates were investigated by tmiaxial quasi-static and dynamic compression tests, respectively. Quasi- static compression tests were carried out with Instron 8874 test machine, while dynamic compression tests were performed with the split Hopkinson pressure bar （SHPB） which was installed with heating device and synchro- assembly system. The dynamic mechanical behaviors tests of TC17 were carded out from room temperature to 800 ℃ at intervals of 200 ℃ and at high sWain rates （5 500-1 9200 s-l）. The stress-strain curves considering temperature-sWain rate coupling actions were obtained. The Johnson-Cook constitutive model was developed through data fitting of the stress-sWain curves. The material constants in the developed constitutive model can be determined using isothermal and adiabatic stress-strain curves at different strain rates. The Johnson-Cook constitutive model provided satisfied prediction of the plastic flow stress for TC17 alloy.展开更多
Using the Gleeble 3500 thermal-mechanical system to simulate thermal cycles with different peak temperatures, the hardness and microstructure in the heat-affected zones of two kinds of 100 kg class hot-rolled extra-hi...Using the Gleeble 3500 thermal-mechanical system to simulate thermal cycles with different peak temperatures, the hardness and microstructure in the heat-affected zones of two kinds of 100 kg class hot-rolled extra-high-strength steel were compared. When the peak temperature of the thermal cycle was 800℃ ,incomplete transformation occurred during quenching in both steels, and massive martensite and bainite grains were formed. The hardness was determined by the composition and distribution of the microstructure. The concentration of massive martensite was low, and hence the hardness was low,in steel #1. Conversely,the massive martensite content in steel #2 was high and uniformly distributed,resulting in a high hardness. These findings can provide a reference for improving the mechanical properties in the softened zone.展开更多
SEISMIC wave inversion is one of the most important means for us to recognize the compositionand structure of the Earth’s interior.Although the experimental techniques of elastic wave ve-locity measurement at in situ...SEISMIC wave inversion is one of the most important means for us to recognize the compositionand structure of the Earth’s interior.Although the experimental techniques of elastic wave ve-locity measurement at in situ high pressure and temperature develop very fast in recent展开更多
The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa （pressure coefficient=l.91） ...The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa （pressure coefficient=l.91） and the temperature is as high as 143°C （geothermal gradient 4.36°C/100 m）, indicating that it is a typical high-temperature and overpressured gas reservoir. The natural gas is interpreted to be coal-type gas derived from the Miocene mature source rocks containing type Ⅱ2-Ⅲ kero- gens as evidenced by high dryness index of up to 0.98 and heavy carbon isotopes, i.e., the δ13C2 ranging from -30.76%o to -37.52%o and δ13C2 ranging from -25.02%o to -25.62%o. The high temperature and overpressured Miocene petroleum system is related mainly to diapir in the Yinggehai Basin and contains more pore water in the overpressured reservoirs due to under- compaction process. The experimental and calculated results show that the solubility of natural gas in formation water is as high as 10.5 m3/m3 under the temperature and pressure conditions of the Sanya Formation, indicating that at least part of the gas may migrate in the form of water-soluble phase. Meanwhile, the abundant gas source in the Basin makes it possible for the rapid saturation of natural gas in formation water and exsolution of soluble gas. Therefore, the main elements controlling formation of the Dongfang 13-1 gas pool include that （1） the diapir activities and accompanying changes in temperature and pressure accelerate the water-soluble gas exsolution and release a lot of free gas; （2） submarine fan fine sandstone in the Huangliu Formation provides good gas-water segregation and accumulation space; and （3） the overlying overpressured mud rocks act as effective caps. The accumulation mechanism reveals that the high temperatural and high pressure structure belt near the diapir structures has a good potential for large and medium-sized gas field exploration.展开更多
Y_(1-x)Ho_xBa_2Cu_3O_(7-δ)(0<x<1) sinsle crystal thin films oriented with the caxis perpendicular to the sur-face were grown by DC magnetron sputtering technique. Target was pieced together with half of YBa_2Cu...Y_(1-x)Ho_xBa_2Cu_3O_(7-δ)(0<x<1) sinsle crystal thin films oriented with the caxis perpendicular to the sur-face were grown by DC magnetron sputtering technique. Target was pieced together with half of YBa_2Cu_3O_(7-δ)(YBCO) and half of HoBa_2Cu_3O_(7-δ)(HBCO) superconducting materials. As the distance between HBCO targetmaterial and substrate is varied , the Ho content in material is changed respectively. When the content of Ho is0. 7 (atom ratio) , the T_c>83K.展开更多
基金the Scientificand Technical Commission Fund of Shanghai
文摘The influence of zirconium on the resistance to high temperature softening of 6082 Al-Mg-Si alloys has been researched. The softening process of 6082 alloys with Zr and without Zr, isothermally conditioned at 250°C, has been investigated. The results show the inclusion of Zr inhibits the decrease of HB in hardness(HB) compared with the alloys without Zr. This is due to the Zr and Al forming coherent dispersoid-A!3Zr, and Al3Zr particles within an Al matrix, which effectively restricts grain boundary movement. A study is also carried out to investigate the changes in resistivity, which occurs during the ageing of alloys containing Zr, compared to those without Zr. It is found that in both cases there is an initial rapid rise in resistivity followed by a slower rise in resistivity as ageing proceeds. The value of resistivity is lower for 6082 alloys with Zr compared with 6082 alloys without Zr; this is explained in terms of the role of Zr in the 6082 alloys.
基金supported by the National Key Research and Development Program of China(2017YFA0603804)the National Natural Science Foundation of China(41831174 and 41430528)+1 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX19_1026)Guwei ZHANG was supported by the China Scholarship Council(NO.201908320503)。
文摘Extreme high temperature(EHT)events are among the most impact-related consequences related to climate change,especially for China,a nation with a large population that is vulnerable to the climate warming.Based on the latest Coupled Model Intercomparison Project Phase 6(CMIP6),this study assesses future EHT changes across China at five specific global warming thresholds(1.5℃-5℃).The results indicate that global mean temperature will increase by 1.5℃/2℃ before 2030/2050 relative to pre-industrial levels(1861-1900)under three future scenarios(SSP1-2.6,SSP2-4.5,and SSP5-8.5),and warming will occur faster under SSP5-8.5 compared to SSP1-2.6 and SSP2-4.5.Under SSP5-8.5,global warming will eventually exceed 5℃ by 2100,while under SSP1-2.6,it will stabilize around 2℃ after 2050.In China,most of the areas where warming exceeds global average levels will be located in Tibet and northern China(Northwest China,North China and Northeast China),covering 50%-70%of the country.Furthermore,about 0.19-0.44 billion people(accounting for 16%-41%of the national population)will experience warming above the global average.Compared to present-day(1995-2014),the warmest day(TXx)will increase most notably in northern China,while the number of warm days(TX90p)and warm spell duration indicator(WSDI)will increase most profoundly in southern China.For example,relative to the present-day,TXx will increase by 1℃-5℃ in northern China,and TX90p(WSDI)will increase by 25-150(10-80)days in southern China at 1.5℃-5℃ global warming.Compared to 2℃-5℃,limiting global warming to 1.5℃ will help avoid about 36%-87%of the EHT increases in China.
基金Project(2019zzts525)supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(U1837207,U1637601)supported by the National Natural Science Foundation of China
文摘In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using Gleeble-3810 thermal simulator.It is proved that the samples underwent obvious dynamic recrystallization behavior during thermal deformation by microstructure observation of deformed specimens.The size of recrystallized grains increases as the temperature improved and the strain rate decreased.Meanwhile,the net softening rate caused by dynamic recrystallization is determined based on the stress-dislocation relationship.It can be found that the value of net softening rate increases quadratically as the Z parameter decreases,and the dynamic recrystallization net softening rate of CuCrZr alloy and 35CrMo steel are calculated to be 21.9%and 29.8%,respectively.Based on the dynamic recrystallization softening effect proposed,the novel elevated temperature flow constitutive models of two different alloys are proposed,and the related parameters are well defined and solved in detail.The predicted values of the obtained models are agreed well with the experimental values.
基金Funded by the National Basic Research Program of China(No.2009CB724401)the Major Science and Technology Program of High-end CNC Machine Tools and Basic Manufacturing Equipment(No.2012ZX04003-041)
文摘The true stress-sWain relationships of Ti-5A1-2Sn-2Zr-4Mo-4Cr（TC17） alloy with a wide range of strain rates were investigated by tmiaxial quasi-static and dynamic compression tests, respectively. Quasi- static compression tests were carried out with Instron 8874 test machine, while dynamic compression tests were performed with the split Hopkinson pressure bar （SHPB） which was installed with heating device and synchro- assembly system. The dynamic mechanical behaviors tests of TC17 were carded out from room temperature to 800 ℃ at intervals of 200 ℃ and at high sWain rates （5 500-1 9200 s-l）. The stress-strain curves considering temperature-sWain rate coupling actions were obtained. The Johnson-Cook constitutive model was developed through data fitting of the stress-sWain curves. The material constants in the developed constitutive model can be determined using isothermal and adiabatic stress-strain curves at different strain rates. The Johnson-Cook constitutive model provided satisfied prediction of the plastic flow stress for TC17 alloy.
文摘Using the Gleeble 3500 thermal-mechanical system to simulate thermal cycles with different peak temperatures, the hardness and microstructure in the heat-affected zones of two kinds of 100 kg class hot-rolled extra-high-strength steel were compared. When the peak temperature of the thermal cycle was 800℃ ,incomplete transformation occurred during quenching in both steels, and massive martensite and bainite grains were formed. The hardness was determined by the composition and distribution of the microstructure. The concentration of massive martensite was low, and hence the hardness was low,in steel #1. Conversely,the massive martensite content in steel #2 was high and uniformly distributed,resulting in a high hardness. These findings can provide a reference for improving the mechanical properties in the softened zone.
文摘SEISMIC wave inversion is one of the most important means for us to recognize the compositionand structure of the Earth’s interior.Although the experimental techniques of elastic wave ve-locity measurement at in situ high pressure and temperature develop very fast in recent
基金supported by National Science and Technology Major Project of China(Grant No.2011ZX05023-004)
文摘The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa （pressure coefficient=l.91） and the temperature is as high as 143°C （geothermal gradient 4.36°C/100 m）, indicating that it is a typical high-temperature and overpressured gas reservoir. The natural gas is interpreted to be coal-type gas derived from the Miocene mature source rocks containing type Ⅱ2-Ⅲ kero- gens as evidenced by high dryness index of up to 0.98 and heavy carbon isotopes, i.e., the δ13C2 ranging from -30.76%o to -37.52%o and δ13C2 ranging from -25.02%o to -25.62%o. The high temperature and overpressured Miocene petroleum system is related mainly to diapir in the Yinggehai Basin and contains more pore water in the overpressured reservoirs due to under- compaction process. The experimental and calculated results show that the solubility of natural gas in formation water is as high as 10.5 m3/m3 under the temperature and pressure conditions of the Sanya Formation, indicating that at least part of the gas may migrate in the form of water-soluble phase. Meanwhile, the abundant gas source in the Basin makes it possible for the rapid saturation of natural gas in formation water and exsolution of soluble gas. Therefore, the main elements controlling formation of the Dongfang 13-1 gas pool include that （1） the diapir activities and accompanying changes in temperature and pressure accelerate the water-soluble gas exsolution and release a lot of free gas; （2） submarine fan fine sandstone in the Huangliu Formation provides good gas-water segregation and accumulation space; and （3） the overlying overpressured mud rocks act as effective caps. The accumulation mechanism reveals that the high temperatural and high pressure structure belt near the diapir structures has a good potential for large and medium-sized gas field exploration.
文摘Y_(1-x)Ho_xBa_2Cu_3O_(7-δ)(0<x<1) sinsle crystal thin films oriented with the caxis perpendicular to the sur-face were grown by DC magnetron sputtering technique. Target was pieced together with half of YBa_2Cu_3O_(7-δ)(YBCO) and half of HoBa_2Cu_3O_(7-δ)(HBCO) superconducting materials. As the distance between HBCO targetmaterial and substrate is varied , the Ho content in material is changed respectively. When the content of Ho is0. 7 (atom ratio) , the T_c>83K.
