Study on Matter Production and Population Photosynthetic Characteristics of High-yielding Spring Maize under Different Modes

In order to construct a good population structure, improve the light energy utilization ratio, and give a full play to the high-yielding potential of spring maize, the effects of maize variety, planting density and fertilizer management on matter production and population photosynthetic physiological indices of spring maize were investigated under three different modes （traditional mode, optimized mode and high- yielding mode）. The results showed that compared with those under the traditional mode, the yield of spring maize under the optimized mode and high-yielding mode was increased by 10.79% and 27.62%, respectively, and the barren tip length was reduced significantly. Among the three modes, the leaf area index （LA/）, leaf area duration （LAD）, dry matter accumulation （DMA） and crop growth rate （CGR） all ranked as high-yielding rnode＇s〉optimized mode＇s〉traditional mode＇s. In conclusion, optimized variety, appropriately increased planting density and strengthened fertilizer management are the key measures to obtain high yield of spring maize.

Yield Characteristics of a New High-quality Disease-resistant Wheat Variety Chuanmai 618

[Objectives]The paper was to analyze the yield characteristics of a new high-quality disease-resistant wheat variety Chuanmai 618.[Methods]The yield characteristics of Chuanmai 618 were analyzed using the AMMI model and GGE biplot based on data from a 2-year regional test and a 1-year production test.[Results]The analysis of the AMMI model for the 2-year regional test indicated that Chuanmai 618 had a moderate yield and good stability.During the production test,Chuanmai 618 had an average yield of 450.52 kg/666.7 m^(2),an effective spike of 235700 spike/666.7 m^(2),a 1000-seed weight of 47.93 g,and a kernel number per spike of 47.28.The AMMI analysis sequencing graph showed that the varieties were ranked in the following order:Zhongkemai 1816>Chuanmai 618>Shumai 1958>Chuanyu 42>Mianmai 367>Xikemai 5518.According to the GE analysis,Chuanmai 618 had comparative advantages.[Conclusions]The new wheat variety Chuanmai 618 is a high-quality disease-resistant variety with good yield and stability.

Principle and practice of coupling support of double yielding shell of soft rock roadway under high stress

In order to ensure the safety and stability of the soft rock roadway under high stress, based on the char- acteristics of the surrounding rock deformation and failure, this paper presented the support technology“coupling support of double yielding shell”, then gave the design method of inner and outer shells and analyzed the principle and requirements of the support technology by taking the -850 meast belt mad-way of Qujiang coal mine as the background. The field application results show that the support technol- ogy can control the soft rock roadway deformation better under high stress. The displacement between roadway sides was 851 mm, the displacement of the roof was 430 mm, and the displacement of the floor was 510 mm.

An experimental study of a yielding support for roadways constructed in deep broken soft rock under high stress

A rationally designed support for deep roadways excavated in broken soft rock under high stress was investigated. The deformation and failure characteristics and the mechanism of ''yielding support'' was studied for anchor bolts and cables. The rail roadway of the 2-501 working face in the Liyazhuang Mine of the Huozhou coal area located in Shanxi province was used for field trials. The geological conditions used there were used during the design phase. The new ''highly resistant, yielding'' support system has a core of high strength, yielding bolts and anchor cables. The field tests show that this support system adapts well to the deformation and pressure in the deep broken soft rock. The support system effectively controls damage to the roadway and ensures the long term stability of the wall rock and safe production in the coal mine. This provides a remarkable economic and social benefit and has broad prospects for fur- ther application.

High Yield Cultivation and Pest Control Technology of Cashew

In order to enhance the yield and quality of cashew,it is essential to implement high-yield cultivation techniques effectively throughout the production process.Additionally,pest control measures should be employed to provide technical support for the industrialized development of cashew.

Effects of culm carbohydrate partitioning on basal stem strength in a high-yielding rice population

Rice culm carbohydrate transport can simultaneously affect grain filling and stem lodging resistance by regulating non-structural carbohydrate(NSC) and structural carbohydrate(SC) contents. However, the relationship between carbohydrate transposition and culm strength is not well documented. Accordingly, a high-yielding hybrid rice cultivar(Y Liangyou 2) was tested under different N fertilization regimes at two locations, Taoyuan(a special high-yield eco-site), Yunnan province and Danyang(a representative eco-site of the middle and lower Yangtze), Jiangsu province, China. Significantly higher grain yield and basal stem strength were found at Taoyuan than Danyang under all N rates throughout the two-year experiment. At heading stage, soluble sugars, starch, cellulose and lignin contents of the basal culm at Taoyuan were significantly 132.0%, 73.7%, 1.2%, and 62.7% higher than those at Danyang, respectively. At 20 days after heading, soluble sugars and starch content at Taoyuan decreased significantly compared to Danyang, but lignin content remained higher. Culm carbohydrate transport to kernels at Taoyuan was significantly greater than that at Danyang, and the proportion of soluble sugars and starch was correspondingly 62.9%lower. However, the proportion of lignin and cellulose was 22.7% higher at Taoyuan than that at Danyang. Soluble sugars and starch partitioning were significantly reduced under an increased nitrogen application rate, but SC partitioning was little affected. There were significant positive correlations between basal culm bending stress and dry weight and cellulose and lignin proportions at both locations under all N rates, suggesting that the higher SC proportion at 20 days after heading was primarily responsible for culm strength.These results suggest that high-yielding rice populations with greater culm strength require both moderate NSC transport and greater SC accumulation.

FEATURE OF SERRATED YIELDING IN HIGH STRENGTH Al-Zn-Mg-Cu ALLOY

The temperature dependence of critical strain for serrated yielding in high strength A1-Zn-Mg-Cu alloy may be divided into two temperature regions.Their temperature coefficients of critical strain will be negative and positive,respectively.

Plant Ideotype at Heading for Super High-Yielding Rice in Double-Cropping System in South China

The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.

Study on Plant Morphological Traits and Production Characteristics of Super High-Yielding Soybean

Super high-yielding soybean cultivar Liaodou 14, soybean cultivars from Ohio in the United States, and the common soybean cultivars from Liaoning Province, China, with similar geographic latitudes and identical pod-bearing habits were used as the study materials for a comparison of morphological traits and production characteristics to provide a theoretical basis for the breeding of improved super high-yielding soybean cultivars. Using a randomized block design, different soybean cultivars from the same latitude were compared under conventional and unconventional treatments for their production characteristics, including morphological traits, leaf area index （LAI）, net photosynthesis rate, and dry matter accumulation. The specific characteristics of the super high-yielding soybean cultivar Liaodou 14 were analyzed. The results showed that the plant height of Liaodou 14 was significantly lower than that of the common cultivars from Liaoning, whereas the number of its main-stem nodes was higher than that of the cultivars from Ohio or Liaoning. A high pod density was observed in Liaodou 14 under conventional treatments. Under both conventional and unconventional treatments, the branch number of Liaodou 14 was markedly higher than that of the common cultivars from Liaoning, and its branch length and leaf inclination angle were significantly higher than those of common cultivars from Liaoning or Ohio. Only small changes in the leaf inclination angle were observed in Liaodou 14 treated with conventional or unconventional methods. Under each treatment, Liaodou 14 exhibited the lowest amplitude of reduction in SPAD values and net photosynthesis rates from the grain-filling to ripening stages; the cultivars from Ohio and the common cultivars from Liaoning exhibited more significant reductions. Liaodou 14 reached its peak LAI later than the other cultivars but maintained its LAI at a higher level for a longer duration. Under both conventional and unconventional treatments, Liaodou 14 produced a higher yield than the other two cultivars, with significant differences from the Ohio cultivars. In summary, super high-yielding soybean cultivars have several main features： suitable plant height, high pod density, good leaf structure with strong functionality, and slow leaf senescence at the late reproductive stage, which is conducive to the accumulation of dry matter and improved yield.

Design of the yielding support used highly deformable elements for a tunnel excavated in squeezing rock

Yielding support is often used in the squeezing tunnel to prevent damage to the lining induced by large deformation of the surrounding rock.Highly Deformable Elements(HDE)which is often installed along the circumferential direction of the shotcrete lining is a common type of yielding support.To determine the yield parameters of HDE,the support characteristic of the lining using HDE and the ground pressure considering strain-softening of soft rock were analyzed by an analytical method.The analytical solution showed that when considering the strain-softening of squeezing ground,the ground pressure has a non-zero minimum value.The minimum value of ground stress can be used to determine the constant yield stress of the HDE,and the corresponding deformation of the minimum ground pressure can be used to determine the deformation capacity of the HDE.Based on the variation in the design constant yield stress and yield displacement of HDE with the in-situ stress and the mechanical parameters of the soft rock,equations were proposed for determining of the yield parameters of the HDE.

High-Yielding Cultivation Techniques of Summer Corn

The high-yielding cultivation practice for summer corn were expounded, pointing out the points for attention in land selection before sowing, basal dressing, fine breed selection, sowing and seedling management.

Changes in Some Physiological Characteristics After Full Heading Stage in Flag Leaves of Super High-Yielding Inbred Rice

In a field experiment, rice cultivar Shanyou 63 was used as a check cultivar to investigate the changes in activity of peroxidase and contents of malondialdehyde and soluble protein after full heading stage in flag leaves of two super high-yielding inbred rice, including Shengtai 1 and Yuxiangyouzhan. The results showed that the peroxidase activities and soluble protein contents in the leaves of the three cultivars tended to increase gradually to peak values and thereafter descended during stage after full heading. Moreover, both the peroxidase activities and soluble protein contents of Shengtai 1 and Yuxiangyouzhan peaked at 8 days after full heading, which was compared with that of Shanyou 63 at 4 days later. Meanwhile, the malondialdehyde contents in the leaves of the three cultivars increased gradually after full heading stage. In addition, activities of peroxidase and contents of malondialdehyde and soluble protein in different cultivars were various at the same time. In general, for Shengtai 1 and Yuxiangyouzhan, the peroxidase activities and soluble protein contents were higher than those of Shanyou 63, whereas the malondialdehyde contents were lower compared with that of Shanyou 63. And these features could make the senescence of leaf become later and slower and photosynthetic product was more in Shengtai 1 and Yuxiangyouzhan than that in Shanyou 63.

Studies on the Relationship Between Grain-yield and Climatic Ecological Factors in Summer Corn Under Super-high-yielding Cultivation Conditions

Cultivation experiments on super-high-yield (^12000kg/ha) of summer corn (Zea mays L.) were conducted in Laizhou, Shangdong Province, from 1986 to 1997, and in Wenxian, Henan Province, from 1996 to 1997. The results showed that requirements of accumulated temperature and hours of sunshine for super-high-yield of summer corn could be met in normal years in the areas of the Huanghuaihai Plain. Amount of precipitation influenced the yield most strongly in indirect way among all the meteorological factors, and the relationship between them displayed significant negative correlation (r= - 0.5418). The regression equation between yield and amount of precipitation at seedling stage and grain filling stage both reached significant level, and the partial regression coefficients were - 4.8735 and - 13.7415, respectively. Further research revealed that the key climatic-ecological factors influencing yield were as fellows: the average temperature in the third and the ninth Xun (note: a Xun indicates ten days and the accounting of Xun was from the corresponding sowing date), the hours of sunshine in the sixth and the eighth Xun, the amount of precipitation in the sixth, the seventh and the second Xun. Results obtained by analyzing yield components of summer corn showed that grain numbers per ear (GN/E) made greater contribution to super-high-yield than kernel weight (KW) and the numbers of ears did. The key factors influencing GN/E were the amount of precipitation in the sixth and the eighth Xun and the hours of sunshine in the sixth Xun, with the correlation coefficients of -0.6074, 0.5793 and 0.5854, respectively.

Investigation of Tree Structure Parameters of High-quality and High-yielding Y-shaped Pear Orchards

In order to study reasonable tree structure parameters of Y-shaped pear orchards in natural conditions and at management technical level of Tai'an area, the tree structure and population structure of high-quality and high-yielding Y-shaped pear orchards were investigated. The results showed that when the yield of Y-shaped 'Oshu' was 2 550 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was about 54 000, and the number of short branches was the largest, accounting for 80.1% of total number of branches, followed by middle branches, long branches and developmental branches. As the yield of Y-shaped 'Qiuyue' was 2 875 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was 51 000, and the number of short branches was the largest, accounting for 75.6% of total number of branches, followed by middle branches, long branches and developmental branches. When the yield of Y-shaped 'Niitaka' was 3 000 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was 43 000, and the number of short branches was the largest, accounting for 82.0% of total number of branches, followed by long branches, middle branches and developmental branches.

Relation Analysis of Several Agronomic Traits and Single Plant Lint Yield in Upland Cotton with High Quality

[ Objective] The purpose was to study the correlation between main agronomic traits and single plant lint yield in upland cotton with high quality. [ Method] Twenty-four upland cotton lines with high quality were analyzed for single plant lint yield and 10 agronomic traits in a randomized, complete block at the agriculture experimental station of JXAU, Nanchang, China in 2007. They were divided into three types （ high, medium, low yield） based on single plant lint yield by Ward＇s method. A total of 11 traits of three types were compared. Correlation a- nalysis and stepwise regression analysis of 10 agronomic traits to single plant lint yield were carried out. [ Result] There existed statistically sig- nificant difference in bolls per plant, ~int percentage, lint index, fruit node numbers, growth period for three yield types. The high yield type ex- hibited the highest bolls per plant, lint percentage and lint index, the lowest fruit node numbers and the shortest growth period. Bolls per plant, boll weight and single plant lint yield were significantly and positively correlated. Fruit node numbers and single plant lint yield were significantly and negatively correlated. Bolls per plant, boll weight, and fruiting position number were the most important factors influencing single plant lint yield of upland cotton lines with high quality. [ Conclusion ] The results will have certain significance for the development of upland cotton variety with high quality.

Effects of Nitrogen Level and High Temperature Stress on Yield, SPAD Value and Soluble Sugar Content of Early Rice Ganxin 203

This study aimed to investigate the combined effects of nitrogen level （high and ordinary） and high temperature stress （37 ℃, 4 d） at the late panicle ini- tiation stage on yield, SPAD value and soluble sugar content of Ganxin 203, an early rice cultivar. The results showed that under both high and ordinary nitrogen levels, high temperature stress reduced the seed-setting rate, yield per stem, SPAD value and soluble sugar content of Ganxin 203; under both high and ordinary tem- peratures, high nitrogen level increased the seed-setting rate, yield per stem and soluble sugar content of Ganxin 203; the seed-setting rate, yield per stem and yield per plant of Ganxin 203 under high temperature and high nitrogen level were higher than those under high temperature and ordinary nitrogen level. It suggests that ap- propriate high nitrogen level contributes to weakening the negative effects of high temperature stress on rice yield.

Effects of Postponing N Application on Metabolism,Absorption and Utilization of Nitrogen of Summer Maize in SuperHigh Yield Region

[Objective] The aim was to explore effects of application postponing of N fertilizer and the mechanism of yield increase in order to provide references for N fertilizer application in a rational way. [Method] In a super-high yielded region of summer maize, field experiment was conducted to research effects of N fertilizer postponing on key enzymes of N metabolism, yield of maize and N fertilizer use. [Result] After application of N fertilizer was postponed, NR, SPS and GS activities of ear-leaf of summer maize increased by 11.99%-34.87%, 8.25%-10.64% and 10.00%- 16.81% on the 28^th d of silking; content of soluble sugar in leaves enhanced signifi- cantly and accumulated nitrogen increased by 5.00%-9.74% in mature stage. The postponing fertilization of ＂30% of fertilizer in seedling stage＋30% of fertilizer in flare- opening stage＋40% of fertilizer in silking stage meets N demands of summer maize in late growth period. Compared with conventional fertilization, the maize yield, agro- nomic efficiency and use of N fertilizer all improved by 5.05%, 1.75 kg/kg and 6.87%, respectively, after application postponed. [Conclusion] Application postponing of N fertilizer maintains activity of NR, GS and SPS higher and coordinates metabolism of C and N in late growth period, to further improve yield of maize.

Analysis of High Yield and Efficiency Technique in Hybrid Rice Zhongzheyou No.1

To understand the high yield and efficiency technique in hybrid rice Zhongzheyou No. 1, we conducted the correlation analysis, regression analysis and path analysis of hybrid rice Zhongzheyou No. 1 based on the data of its ear, grain and weight at different yield levels. From this study, we put forward the high yield and efficiency technique in Zhongzheyou No. 1 .. on the basis of certain effective ear number, filled grains per ear should be mainly targeted with a consideration to 1 000-grain weight.

Relationship between Pepper Cultivars' Yields and High Temperatures with Pepper in Different Genotypes

[Objective] The aim was to research effects of high temperature stress on pepper yield by cultivation of peppers in different genotypes and provide theoretical references for pepper breeding and high-yield cultivation. [Method] Four pepper va- rieties were studied with varied genotypes to explore effects of temperatures on pepper fruiting and yield in the whole growth stage. [Result] The optimal-temperatre term for pepper blooming and fruiting were shorter. For example, the periods from June 16 to July 15 and from August 16 to September 15 would be the best, with temperature ranging from 20.70 ℃ to 30.74 ℃. In the stage from July 16 to August 15, the temperature range of 24.22 ℃-32.17 ℃ would severely affect pepper growth and yield. Pepper No. 1 and pepper No. 1-1＇s yields were just 38.21% and 51.74% of the yields in the stage 1st and 52.01% and 62.35% in the stage 3rd and eady No. 1 and late No. 1 were 48.1% and 72.38%, respectively. Under high tem- perature stress in summer, pepper No. 1, pepper No. 1-1, and late No. 1 showed extremely significant differences with early No. 1 （P〈0.01）. The yield ratios of pep- per No. 1 and pepper No. 1-1 in stage 1st （May 25-July 15） and the later three stages were 42.34：57.66 and 39.50：60.50; the ratio was 47.99：52.21 of early No. 1; the ratio of late No. 1 was 20.25：79.75. [Conclusion] The cultivation approaches should vary upon pepper variety, necessitating the focus on pepper management, fertilization, and irrigation, and locating peak-blooming term in moderate-temperature stage to accelerate pepper growth.

Breeding of High Yield and Genetically Modified Hybrid Cotton-Sumian 29

Sumian 29, a genetically modified cotton variety, was approved by Autho- rized Committee of Crop Varieties of Jiangsu Province in 2013. Yield performance, cultivation characteristics of Sumian 29, and its selection and breeding process were introduced in the paper. Regional tests from 2010 to 2011 in Jiangsu Province showed that seed cotton yield and lint yield averaged 4 185 and 1 737 kg/hm2, and increased by 10.6% and 8.5% respectively, when compared with control （Siza 3）. In production test, seed cotton yield and lint yield of Sumian 29 averaged 4 176 and 1 744.5 kg/hm2, respectively. Sumian 29 had high resistance to cotton bollworm, and also resistance to Fusarium wilt and Verticillium wilt of cotton. All of its fiber qualities achieved National Standard III and above. Sumian 29 has good application prospects.