Recovering limonite from Australia iron ores by flocculation-high intensity magnetic separation

Successful recovery of limonite from iron fines was achieved by using flocculation-high intensity magnetic separation （FIMS） and adding hydrolyzed and causticized flocculants according to the characteristic of iron fines. The separation results of the three iron samples are as follows： iron grade 66.77%- 67.98% and the recovery of iron 69.26%-70.70% by the FIMS process with flocculants. The comparative results show that under the same separation conditions the F1MS process can effectively increase the recovery of iron by 10. 97%- 15.73%. The flowsheet results confirm the reliability of the process in a SHP high intensity magnetic separator. The concentrate product can he used as raw materials for direct reduction iron-smelting. The hydrolyzed and causticized flocculants can selectively flocculate fine feebly-magnetic iron mineral particles to increase their apparent separation sizes. The larger the separation size, the stronger the magnetic force. By comparing the separation results of the three samples it is found that among the three samples the higher the limonite content, the better the separation result. This means that the separation result relates closely to the flocculation process and the adding pattern of the flocculant.

Removal of phosphate from municipal sewage by high gradient magnetic separation

The removal of phosphate from municipal sewage by high gradient magnetic separation using aluminium sulphate as precipitating agent and Fe3O4 as seeding material was studied. The effects of aluminium sulphate, Fe3O4, magnetic field intensity, pH value and flow-rate of sewage on phosphorus removal rate were investigated. The results show that addition of 200 mg/L Al2（SO4）3·18H2O and 300 mg/L Fe3O4, magnetic field intensity of 200 kA/m, pH value of 4.57.0 and flow-rate of 6.15 cm/s are both efficient and economic technical parameters for removal of phosphate. The pH value has a tremendous effect on the removal of phosphate. In the pH range of （4.5）7.0, more than 95% phosphate can be removed. Theoretical analysis indicates that the solubility of AlPO4 is minimum at pH 4.07.0 and the electrostatic attractive force between AlPO4 and Fe3O4 is maximum at pH 4.5（6.5.）

Separation efficiency of alumina particles in Al melt under high frequency magnetic field

The effects of separation time and magnetic induction intensity on the separation efficiency of alumina particles with diameters varying from 30 to 200 μm in aluminum melt were investigated. The experimental results show that the particle-accumulated layer is formed in the periphery of the solidified specimen when the diameter of the separated molten metal, the magnetic induction intensity and the separation time are 10 mm, 0.04 T and 1 s, respectively. When the separation time is 2 s, the particle-accumulated layer can be observed obviously and the separation efficiency is about 80%. There are few alumina particles in the inner of the solidified specimen when the separation time is 3 s. The separation efficiency higher than 85% can be achieved when the separation time is longer than 3 s. When the magnetic induction intensity is 0.06 T, the visible particle-accumulated layer can be formed in 1 s and the separation efficiency is higher than 95%. The experimental results were compared with the calculated results at last.

KAOLIN CLAY PURIFICATION BY DRY HIGH GRADIENT MAGNETIC SEPARATION

A new method-dry High Gradient Magnetic Separation （HGMS）-to remove iron from ultrafine kaolin powder is described. A new kind of disperser, which breaks down the particle clusters in the powder by high speed gas flow from an air compressor, is used to completely disperse the powders. The dispersed particles are passed through vibrating HGMS by a vacuum pump to remove the iron. The magnetic and nonmagnetic fractions are separately collected by cloth collectors. Dry HGMS laboratory experiments are carried out. A product containing 0.90％ Fe2O3 was obtained, and the recovery was 70％.

Study on Optimizing High-Gradient Magnetic Separation—Part 2: Experimental Evaluation of the Performance of a New Designed Magnetic Filter

The introduction of functionalized magnetizable particles and high-gradient magnetic separation represents a time and money saving alternative to conventional purification and separation unit operations in the biotechnical sector. This technique has some advantages especially for the recycling of immobilized enzymes. A new magnetic filter with sight glasses was constructed and produced to study the performance of high-gradient magnetic separation at varied parameters. By optical analysis the buildup of a clogging was identified as the major parameter which affected the separation performance. For the cleaning procedure, a two-phase flow of water with highly dispersed air bubbles was tested which led to a nearly complete cleaning of the filter chamber.

Study on Optimizing High-Gradient Magnetic Separation—Part 1: Improvement of Magnetic Particle Retention Based on CFD Simulations

The introduction of functionalized magnetizable particles for the purification of enzymes or for the multi-use of pre-immobilized biocatalysts offers a great potential for time and cost savings in biotechnological process design. The selective separation of the magnetizable particles is performed for example by a high-gradient magnetic separator. In this study FEM and CFD simulations of the magnetic field and the fluid flow field within a filter chamber of a magnetic separator were carried out, to find an optimal separator design. The motion of virtual magnetizable particles was calculated with a one-way coupled Lagrangian approach in order to test many geometric and parametric variations in reduced time. It was found that a flow homogenisator smoothed the fluid flow, so that the linear velocity became nearly equal over the cross section in the direction of flow. Furthermore the retention of magnetizable particles increases with a high total edge length within the filter matrix.

Innovative pre-concentration technology for recovering ultrafine ilmenite using superconducting high gradient magnetic separator

To achieve the utilization of the abandoned ultrafine ilmenite(-20 μm) produced in the titanium magnetite processing plant in Panzhihua,the superconducting high-gradient magnetic separation(SMS) technology was proposed in this study.After optimizing the conditions of magnetic intensity,feeding and pulsation,an SMS concentrate with TiO_(2) grade of 16.03% and TiO_(2) recovery of 66.39% was obtained through one roughing-one cleaning pre-concentration flowsheet.The specific magnetic force and magnetic force were calculated and analysed to illustrate the pre-concentration mechanism,and the results revealed that the combination of high magnetic field and strong pulsating resulted in the effective preconcentration of the ultrafine ilmenite in the SMS process.In addition,the magnetic force analysis indicated that the high magnetic intensity and high magnetic gradient are the key factors of the SMS technology.Furthermore,the EDS-Mapping detection certified that the ultrafine ilmenite was concentrated from the gangue minerals using SMS technology.

Removing Iron by Magnetic Separation from a Potash Feldspar Ore

A new permanent magnetic separator was introduced to treat the ores with the characteristics of weak magnetic iron minerals and in a fine size range. The new machine was applied to the iron removal from potash feldspar. The effects of the magnetic field intensity, pulp density and grinding fineness on the iron removal were investigated. The optimized operation parameters were achieved and listed as follows： the -0.074 mm content is 85%, the pulp density is 45% and the magnetic field strength is 2T. A close test of middles regrinding was also carried out to improve concentrate yield. The data show that the grade of TFe（total iron） in potash feldspar product decreased from 1.31% to 0.21% and the concentrate yield reached 85.32%. All the results indicated that the traditonal high-intensity electromagnetic separators can be betterly substituted by the new permanent magnetic separator. This study may provide the theoretical evidence for iron removal from potash feldspar.

MAGNETIC SEPARATION OF FLUID CATALYTIC CRACKING EQUILIBRIUM CATALYST

ＭＡＧＮＥＴＩＣＳＥＰＡＲＡＴＩＯＮＯＦＦＬＵＩＤＣＡＴＡＬＹＴＩＣＣＲＡＣＫＩＮＧＥＱＵＩＬＩＢＲＩＵＭＣＡＴＡＬＹＳＴ①ＣｈｅｎＪｉｎ，ＸｉａｎｇＦａｚｈｕａｎｄＨｅＰｉｎｇｂｏＤｅｐａｒｔｍｅｎｔｏｆＭｉｎｅｒａｌＥｎｇｉｎｅｒｉｎｇ，Ｃｅｎｔ...

Magnetic field characteristics analysis of a single assembled magnetic medium using ANSYS software

The section shape of an assembled magnetic medium is the most important structural parameter of a high gradient magnetic separator, which directly affects the induction distribution and magnetic field gradient of the magnetic separator. In this study, equilateral triangle, square, hexagonal, octagon, dodecagon, and round shape sections of the assembled magnetic medium are chosen to study their influence on magnetic field distribution characteristics using the ANSYS analysis. This paper utilizes a single assembled magnetic medium to understand the relationship between the geometry of the assembled magnetic medium and its magnetic field distribution characteristics. The results show that high magnetic field,regional field, magnetic field gradient, and magnetic force formed by the different sections of the assembled magnetic medium in the same background magnetic field reduce in turn based on the triangle,square, hexagonal, octagon, dodecagon, and round. Based on the magnetic field characteristics analytic results, the magnetic separation tests of the ilmenite are carried out. The results indicate that the section shape of the toothed plate compared with the section shape of cylinder can improve the recovery of ilmenite up to 45% in the same magnetizing current condition of 2A, which is consistent with magnetic field characteristics analysis of different assembled magnetic medium section shapes.

A study on the rare earth ore containing scandium by high gradient magnetic separation

Scandium (Sc) concentration from the rare earth ore by high gradient magnetic separation (HGMS) was determined on the basis of Sc content, geophysical parameter determination and the magnetic analyses of the ore. Based on the condition experiments, expanding experiments were carried out. The results showed that the ore had a Sc grade of 48.90 g/t, and after removing iron by low-intensity magnetic separation, a Sc concentrate of 314.89 g/t grade and with 77.53% recovery was obtained by one-stage roughing-one...

Recovery of boron from high-boron iron concentrate using reduction roasting and magnetic separation

The comprehensive utilization of abundant high-boron iron concentrate is of particular significance to Chi- na, and the high-boron iron concentrate has not yet been utilized as a source for boron at an industrial scale due to its complex mineralogy and fine mineral dissemination. An innovative method was proposed for recovery of boron and iron from high-boron iron concentrate by reduction roasting and magnetic sepa- ration. The effects of reduction temperature and roasting time were investigated and their optimum condi- tions were determined. The mineralogical changes during roasting were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results showed that the pyrrhotite （FeS） contained in the high-boron iron concentrate and the new-formed FeS-Fe solid solution softened or melted at high temperatures owing to their low melting points, and then decreased the metallic iron ratio and accelerated the growth of metallic iron particles. Meanwhile, the magnetite and szaibelyite were converted into metal- lic iron and suanite, respectively. Consequently, boron was readily enriched into the non-magnetic product and the metallic iron was aggregated to the magnetic concentrate by magnetic separation. Boron recovery of 88.6% with corresponding B2O3 content of 14.5% and iron recovery of 95.1% with an iron grade of 92.7% were achieved when high-boron iron concentrate was reduced at 1 125℃ for 150 min. Besides, the boron reactivity of the boron-rich non-magnetic product was up to 80.8%.

Mechanism of phosphorus removal in beneficiation of high phosphorous oolitic hematite by direct reduction roasting with dephosphorization agent

High phosphorous oolitic hematite ore is one of typical intractable iron ores in China, and the conventional beneficiation methods are found to be impracticable to , remove phosphorus from the ore effectively. Better beneficiation index were gotten by direct reduction roasting with dephosphorization agent followed by two stages of grinding and magnetic separation. P content decreases from 0.82% in the raw ore to 0.06% in the magnetic concentrate, and the total iron grade increases from 43.65% to 90.23%, the recovery of iron can reach 87%. Mechanisms of phosphorus removal in the beneficiation of high phosphorous oolitic hematite ore by direct reduction roasting with dephosphorization agent were studied using XRD, SEM and EPMA. The results showed that about 20% of the apatite in the raw ore transferred into phosphorus and volatilized with the gas in the process of reduction roasting, while the rest 80% apatite was not involved in the reaction of generation of phosphorus, and remained as apatite in the roasted products, which was removed to tailings by grinding and magnetic separation. A small amount of phosphorus existed in the magnetic concentrate as apatite. The oolitic texture of raw ore was partly changed during roasting, resulting in the formation of nepheline in the reaction between the dephosphorization agent, SiO2 and Al2O3 in the raw ore, which greatly improved the liberation degree of minerals in the roasted products, and it was beneficial to the subsequent grinding and magnetic separation.

Comprehensive recovery of Fe,Zn,Ag and In from high iron-bearing zinc calcine

A beneficiation-metallurgy combination process is developed to recover Zn, Fe and to enrich In, Ag from high iron-bearing zinc calcine based on our former researches. In gaseous reductive roasting process, the roasting conditions were tested by magnetic separation of roasted product. It is found that the V_(CO)(P_(CO)/(P_(CO+CO_2)) in roasting atmosphere should be maintained below 30% to avoid the generation of zinc iron solid solution(Fe_(0.85-x)Zn_xO), which can bring a decrease of iron recovery in magnetic separation. After roasting, acid leaching and multistage magnetic separation are carried out for the recovery of Zn, Fe and enrichment of Ag and In. About 90% of zinc is extracted and 83% of iron is recovered in the whole process. The Ag mainly enters the tailings with a recovery of 76%, the Ag grade increases from 0.12 g/t in raw materials to 1.18 g/t in the tailings. However, the In mainly enters the iron concentrations and the recovery reaches 86%. This process was proved to be technically feasible and may be a favorable option in the treatment of high iron-bearing zinc material with high Ag or In content.

美国High-Force永磁磁选机工业试验研究

介绍了美国 Ｈｉｇｈ－ Ｆｏｒｃｅ 永磁磁选机在梅山铁矿的工业试验情况， 就存在的问题进行了探讨，并提出了改进的建议。

高梯度磁选中非磁性颗粒的机械夹杂行为

非磁性矿物颗粒的机械夹杂是影响高梯度磁选选择性的重要因素。基于自主设计的高梯度磁选试验装置,对磁介质上、下游累积物进行冷冻、剥离和独立分析,系统研究了各种关键参数对非磁性颗粒机械夹杂行为的影响。结果表明,磁介质下游捕集的选择性都优于上游。非磁性矿物的机械夹杂主要发生在介质上游,增加给矿流速和减小非磁性颗粒的粒度可以提高高梯度磁选的选择性,磁场强度对介质上下游机械夹杂的影响较小。在较低流速条件下,弱化上游捕集和强化下游捕集具有重要意义,并提出了提高选择性的两种潜在技术方案。

程潮铁精矿带式磁选提质试验研究

针对氢基还原竖炉所需高品位铁精矿原料短缺问题,对程潮铁精矿进行磁滚筒精选、弱磁选—磁选柱精选以及带式磁选机精选提质研究。结果表明,在磨矿细度为-0.037 mm占85%时,采用两段带式磁选流程,可以得到TFe品位为70.16%、产率为87.33%、TFe回收率为92.51%的精矿产品;优化带式磁选参数并额外新增一排清洗水出水口进行磁选,得到精矿TFe品位为70.78%、产率为45.71%,尾矿TFe品位为62.40%、产率为54.29%。带式磁选精选2个流程均能获得TFe品位符合要求的精矿产品,且额外新增一排清洗水出水口的流程得到的尾矿产品可以直接利用。本研究可为国内优质磁铁精矿提质制备高品位铁精矿提供参考。

南芬选矿厂北山矿石选矿工艺试验

为配合南芬铁矿绿色矿山选矿提效及高效利用北山原矿石,在工艺矿物学研究的基础上,对北山矿石进行了选矿工艺流程试验。试验结果表明:采用辊磨前干抛—高压辊磨—辊磨产品湿式抛尾—阶段磨矿—弱磁选工艺,干抛和湿抛可提前抛除合计产率23.26%的尾矿,大幅降低了后续入磨矿量,提升了入磨矿样铁品位,最终获得的铁精矿产率为30.77%,TFe和mFe含量分别为68.17%和60.22%,TFe和mFe回收率分别为66.63%和98.16%。

江西某脉石英制备4N5级高纯石英砂试验研究

利用江西某脉石英岩心矿石制备高纯石英砂,探究了磨矿时间、磁选、擦洗、矿浆pH值对高纯石英砂纯度的影响,确定最佳试验条件,采用4段磁选-2段擦洗-2段水洗-2段浮选-2段脱药-焙烧-水淬-酸浸工艺,得到的最终产品石英砂SiO_(2)含量(质量分数,下同)达到4N5级,总杂质含量为54.84μg/g,其中Al元素含量为16.76μg/g,Na元素含量为5.83μg/g,K元素含量为6.46μg/g,Fe元素含量为17.50μg/g。该工艺对对脉石英矿物制备高纯石英砂具有一定指导意义。

脉动高梯度磁选分离微细铜钼混合精矿试验研究

黄铜矿(顺磁性)和辉钼矿(逆磁性)存在微弱的磁性差异,可以通过高梯度磁选分离。采用SLon-100型周期式脉动高梯度磁选机,对金堆城钼业某铜钼混合浮选粗精矿(铜、钼品位分别为14.42%和12.40%、-0.019 mm产率83.80%)进行了黄铜矿与辉钼矿分离试验研究。结果表明,在脉动冲程为5 mm、脉动冲次为150 r/min、棒介质直径为1.5 mm、矿浆流速为2.0 cm/s、粗选磁感应强度为1.6 T、扫选磁感应强度为1.7 T的条件下,经1粗1扫脉动高梯度强磁选,获得了产率48.64%、铜品位22.82%、钼品位4.40%和铜回收率77.82%的铜精矿,及产率51.36%、铜品位6.16%、钼品位19.96%和钼回收率82.73%的钼精矿,实现了有效的微细粒铜钼矿物分离。研究结果证明了脉动高梯度磁选分离微细粒铜钼混合精矿的有效性,可以为类似铜钼混合精矿的绿色分离提供指导。