ASYMMETRIC VORTICES FLOW OVER SLENDER BODY AND ITS ACTIVE CONTROL AT HIGH ANGLE OF ATTACK

The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an update state of art to the investigations on the fields of forebody asymmetric vortices.This review emphasizes the correlation between micro-perturbation on the model nose and its response and evolution behaviors of the asymmetric vortices.The critical issues are discussed, which include the formation and evolution mechanism of asymmetric multi-vortices;main behaviors of asymmetric vortices flow including its deterministic feature and vortices flow structure;the evolution and development of asymmetric vortices under the perturbation on the model nose;forebody vortex active control especially discussed micro-perturbation active control concept and technique in more detail.However present understanding in this area is still very limited and this paper tries to identify the key unknown problems in the concluding remarks.

Control of Asymmetric Flow Fields of Slender Bodies at High Angle of Attack

The wind tunnel experiments is conducted to get inspiration for understanding the mechanism of the asymmetric flow pattern and developing an innovative flow control technique for a slender body at high angle of attack. The bi-stable situation of the side forces is observed, which could be easily switched by a tiny disturbances either from coming flow or from artificial disturbances at nose tip （including manufacturing defect）. In turbulent flows the side forces switched randomly between positive and negative. There exists a hysteresis loop of side force with the rolling angle. A rod in front of the slender body is used to change the vortex pattern, which could be kept even the rod is moved out from the stream. A miniature strake attached to the nose tip of the model can be moved to different circumferential position. When the strake is stationary, the hysteresis loop disappears and the side force does not change with the turbulent fluctuation of coming flow. The results from dynamic measurements of section side force indicates that when the strake swung at lower frequency the side force can follow the cadence of the swinging strake. With increasing frequency, the magnitude of the side force decreases. At still high frequency, the side force diminishes to zero. If the strake is swinging, while the middle position can be changed to different circumferential angle Фs on either left or right side, the side forces can be changed proportionally with the angle Фs. On the basis of the experimental results, the mechanism of the asymmetry is discussed.

High myopia as a risk factor in primary open angle glaucoma

Glaucoma, one of the leading causes of irreversible blindness in the adult population worldwide, is a progressive optic neuropathy. Primary open angle glaucoma (POAG) is the most commonly reported type of glaucoma in population based prevalence studies worldwide. Elevated intraocular pressure is a well-known major risk factor for POAG. In addition, there is growing evidence that other risk factors like age, gender, race, refractive error, heredity and systemic factors may play a role in glaucoma pathogenesis. Many studies found that high myopia has been associated with POAG, however, direct and convincing evidences are still lacking. The aim of this review is to summarize the evidences implicating high myopia as a risk factor in the pathogenesis of POAG.

Scanning transmission electron microscopy: A review of high angle annular dark field and annular bright field imaging and applications in lithium-ion batteries

Scanning transmission electron microscopy（STEM） has been shown as powerful tools for material characterization,especially after the appearance of aberration-corrector which greatly enhances the resolution of STEM. High angle annular dark field（HAADF） and annular bright field（ABF） imaging of the aberration-corrected STEM are widely used due to their high-resolution capabilities and easily interpretable image contrasts. However, HAADF mode of the STEM is still limited in detecting light elements due to the weak electron-scattering power. ABF mode of the STEM could detect light and heavy elements simultaneously, providing unprecedented opportunities for probing unknown structures of materials. Atomiclevel structure investigation of materials has been achieved by means of these imaging modes, which is invaluable in many fields for either improving properties of materials or developing new materials. This paper aims to provide a introduction of HAADF and ABF imaging techniques and reviews their applications in characterization of cathode materials, study of electrochemical reaction mechanisms, and exploring the effective design of lithium-ion batteries（LIBs）. The future prospects of the STEM are also discussed.

COMPUTATION OF FIELD STRUCTURE AND AERODYNAMIC CHARACTERISTICS OF DELTA WINGS AT HIGH ANGLES OF ATTACK

A numerical investigation of the structure of the vortical flowfield over delta wings at high angles of attack in longitudinal and with small sideslip angle is presented. Three-dimensional Navier-Stokes numerical simulations were carried out to predict the complex leeward-side flowfield characteristics that are dominated by the effect of the breakdown of the leading-edge vortices. The methods that analyze the flowfield structure quantitatively were given by using flowfield data from the computational results. In the region before the vortex breakdown, the vortex axes are approximated as being straight line. As the angle of attack increases, the vortex axes are closer to the root chord, and farther away from the wing surface. Along the vortex axes, as the adverse pressure gradients occur, the axial velocity decreases, that is, A is negativee, so the vortex is unstable, and it is possible to breakdown. The occurrence of the breakdown results in the instability of lateral motion for a delta wing, and the lateral moment diverges after a small perturbation occurs at high angles of attack. However, after a critical angle of attack is reached the vortices breakdown completely at the wing apex, and the instability resulting from the vortex breakdown disappears.

Engagement Angle Modeling for Multiple-circle Continuous Machining and Its Application in the Pocket Machining

The progressive cutting based on auxiliary paths is an effective machining method for the material accumulating region inside the mould pocket. But the method is commonly based on the radial depth of cut as the control parameter, further more there is no more appropriate adjustment and control approach. The end-users often fall to set the parameter correctly, which leads to excessive tool load in the process of actual machining. In order to make more reasonable control of the machining load and toolpath, an engagement angle modeling method for multiplecircle continuous machining is presented. The distribution mode of multiple circles, dynamic changing process of engagement angle, extreme and average value of engage- ment angle are carefully considered. Based on the engagement angle model, numerous application techniques for mould pocket machining are presented, involving the calculation of the milling force in multiple-circle continuous machining, and rough and finish machining path planning and load control for the material accumulating region inside the pocket, and other aspects. Simulation and actual machining experiments show that the engagement angle modeling method for multiple-circle continuous machining is correct and reliable, and the related numerous application techniques for pocket machining are feasible and effective. The proposed research contributes to the analysis and control tool load effectively and tool-path planning reasonably for the material accumulating region inside the mould pocket.

Digital image correlation based high-speed crack tip locatingmethod and its application

Based on a digital image correlation（DIC）method with the measurements of a high speed crack＇s displacement and strain fields,a technique to accurately and automatically locate its crack tip has been developed.The crack tip is identified by finding the abrupt jump on the opening（or dislocation）curve of a point on the trace of the crack propagation,while the opening is measured through a virtual extensometer technique and the abrupt jump is identified by finding the peak on the curve.The method was verified using a specially designed experiment and applied to measure the critical crack tip opening angle of a rock sample.Because the involvement of analytical models has been avoided and then the good performance could be ensured for low resolution speckle images,this technique is expected to be very useful in the quantitative study of high speed cracks in experiments using high speed cameras.

Unsteady aerodynamic modeling at high angles of attack using support vector machines

Abstract Accurate aerodynamic models are the basis of flight simulation and control law design. Mathematically modeling unsteady aerodynamics at high angles of attack bears great difficulties in model structure determination and parameter estimation due to little understanding of the flow mechanism. Support vector machines （SVMs） based on statistical learning theory provide a novel tool for nonlinear system modeling. The work presented here examines the feasibility of applying SVMs to high angle.-of-attack unsteady aerodynamic modeling field. Mainly, after a review of SVMs, several issues associated with unsteady aerodynamic modeling by use of SVMs are discussed in detail, such as sele, ction of input variables, selection of output variables and determination of SVM parameters. The least squares SVM （LS-SVM） models are set up from certain dynamic wind tunnel test data of a delta wing and an aircraft configuration, and then used to predict the aerodynamic responses in other tests. The predictions are in good agreement with the test data, which indicates the satisfving learning and generalization performance of LS-SVMs.

INFLUENCE OF NOSE PERTURBATIONS ON BEHAVIORS OF ASYMMETRIC VORTICES OVER SLENDER BODY

The influence of nose perturbations on the behaviors of asymmetric vortices over a slender body with a three-caliber ogive nose is studied in this paper. The tests of a nose-disturbed slender body with surface pressure measurement were conducted at a low speed wind tunnel with subcritical Reynolds number of 1×105 at angle of attack α=50°. The experiment results show that the behaviors and structure of asymmetric vortices over the slender body are mainly controlled by manual perturbation on the nose of body as compared with geometrical minute irregularities on the test model from the machining tolerances. The effect of the perturbation axial location on asymmetric vortices is the strongest if its location is near the model apex. There are four sensitive circumferential locations of manual perturbation at which bistable vortices over the slender body are switched by the perturbation. The flowfield near the reattachment line of lee side is more sensitive to the perturbation, because the saddle point to saddle point topological structure in this reattachment flowfield is unstable. Various types of perturbation do not change the perturbation effect on the behaviors of bistable asymmetric vortices.

Recent progress on the study of asymmetric vortex flow over slender bodies

The investigations of forebody vortex flow and its flow control have great importance in both academic field and engineering application areas. A large number of papers and many review papers have been published. However in this research field of forebody asymmetric vortices, three problems such as tip perturbation effect, Reynolds number effect and flow instability are less studied and thus not understood completely. So many researches are still working on the issues in recent years. The present paper attempts to provide a review of recent research progress on first two problems. The first problem is mainly concerned with how the vortex flow evolves after tip perturbation; how to solve the problem of repeatability and reproducibility of wind tunnel testing data; how to develop a conception of active flow control technique with tip perturbation based on the study of vortex flow response to tip perturbation. For the second problem one is mainly concerned that how the asymmetric vortices are developed with the increase of Reynolds number; how to classify the vortex flow patterns in different Reynolds number regimes; how to develop an appropriate boundary layer transition technique to simulate flows at high Reynolds number in the convention wind tunnels. Finally, some important ques- tions that deserve answers are proposed in the concluding remarks.

Effect of high myopia on 24-hour intraocular pressure in patients with primary open-angle glaucoma

Background As intraocular pressure （lOP） and lOP fluctuation are known risk factors for glaucoma, it is important to understand the effects of high myopia on these ocular parameters. The aim of this study was to investigate if primary open-angle glaucoma （POAG） patients with high myopia exhibit higher lOP and greater lOP fluctuations at resting conditions over 24 hours. Methods We designed a prospective control clinical study. Eighty-two eyes of 82 high-tension Chinese POAG patients only on prostaglandin analogue locally were divided into 3 groups according to various myopic grades （〈-6.0 D, n=27 and between -0.76 and -5.99 D, n=33） or without myopia （-0.75 to 0.75 D, n=22）. Single time lOP at 10 am, mean corrected 24-hour lOP, mean corrected night lOP, 24-hour lOP fluctuation and lOPs of 10 am, 2 pm, 6 pm, 10 pm, 2 am, 6 am and 8 am were measured. Results The lOP was higher in POAG patients with high myopia over those POAG alone in three ways： the elevated lOP value was 0.65 mmHg measured in single time lOP at 10 am, 0.84 mmHg in mean corrected 24-hour lOP, 0.97 mmHg in mean corrected night lOP. The 24-hour lOP fluctuation was lower in the two myopia groups than in non-myopia group. Further, using repeated measurement analysis of variance, there was no statistical significance among groups regarding the lOPs at the seven time points （P=0.77） and there was no interaction between groups and time points （P=0.71）, but the difference of lOPs at the seven time points in same group was statistically significant （P=0.01）. Conclusion High-tension POAG patients with high myopia, even on pharmacological glaucoma therapy, still have hinhe.r IC）P. h^Jt 24-hnur IC）P fluc.tuatinn at re.qtina ~.nnditinn.q wA.q InwAr in th~..~, n^ti~.nt.q

Effects of tip perturbation and wing locations on rolling oscillation induced by forebody vortices

The wing rock motion is frequently suffered by a wing-body configuration with low swept wing at high angle of attack. It is found from our experimental study that the tip perturbation and wing longitudinal locations affect significantly the wing rock motion of a wing-body. The natural tip perturbation would make the wing rock motion of a nondeterministic nature and an artificial mini-tip perturbation would make the wing rock motion deterministic. The artificial tip perturbation would, as its circumferential location is varied, generate three different types of motion patterns： （1） limit cycle oscillation, （2） irregular oscillation, （3） equilibrium state with tiny oscillation. The amplitude of rolling oscillation corresponding to the limit cycle oscillatory motion pattern is decreased with the wing location shifting downstream along the body axis.

Experimental investigation of influence of strake wings on self-induced roll motion at high angles of attack

The modern high performance air vehicles are required to have extreme maneuverability,which includes the ability of controlled maneuvers at high angle of attack. However, the nonlinear and unsteady aerodynamic phenomena, such as flow separation, vortices interaction, and vortices breaking down, will occur during the flight at high angle of attack, which could induce the uncommanded motions for the air vehicles. For the high maneuverable and agile air missile, the nonlinear roll motions would occur at the high angle of attack. The present work is focused on the selfinduced nonlinear roll motion for a missile configuration and discusses the influence of the strake wings on the roll motion according to the results from free-to-roll test and PIV measurement using the models assembled with different strake wings at a = 60°. The free-to-roll results show that the model with whole strake wings(baseline), the model assembled with three strake wings(Case A)and the model assembled with two opposite strake wings(Case C) experience the spinning, while the model assembled with two adjacent strake wings(Case B), the model assembled with one strake wing(Case D) and the model with no strake wing(Case E) trim or slightly vibrate at a certain "×"rolling angle, which mean that the rolling stability can be improved by dismantling certain strake wings. The flow field results from PIV measurement show that the leeward asymmetric vortices are induced by the windward strake wings. The vortices would interact the strake wings and induce crossflow on the downstream fins to degrade the rolling stability of the model. This could be the main reason for the self-induced roll motion of the model at a = 60°.

Bifurcation analysis of polynomial models for longitudinal motion at high angle of attack

To investigate the longitudinal motion stability of aircraft maneuvers conveniently, a new stability analysis approach is presented in this paper. Based on describing longitudinal aerodynamics at high angle-of-attack （a ＆lt; 50 ） motion by polynomials, a union structure of two-order differential equation is suggested. By means of nonlinear theory and method, analytical and global bifurcation analyses of the polynomial differential systems are provided for the study of the nonlinear phenomena of high angle-of-attack flight. Applying the theories of bifurcations, many kinds of bifurcations, such as equilibrium, Hopf, homoclinic （heteroclinic） orbit and double limit cycle bifurcations are discussed and the existence conditions for these bifurcations as well as formulas for calculating bifurcation curves are derived. The bifurcation curves divide the parameter plane into several regions; moreover, the complete bifurcation diagrams and phase portraits in different regions are obtained. Finally, our conclusions are applied to analyzing the stability and bifurcations of a practical example of a high angle-of-attack flight as well as the effects of elevator deflection on the asymptotic stability regions of equilibrium. The model and analytical methods presented in this paper can be used to study the nonlinear flight dynamic of longitudinal stall at high angle of attack.

Time delay compensation in lateral-directional flight control systems at high angles of attack

The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack.In this investigation,the effects of time delay on the lateral-directional stability augmentation system in high-a regime are discussed based on theβmodel,which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateraldirectional unsteady aerodynamic characteristics at high angles of attack.Both theβmodel and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-a maneuvers.The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay.Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based onβmodel are designed to address the time delay in different maneuvers.The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack.Finally,the gain-prediction compensator is combined with a linearizedβmodel reference adaptive controller to compensate the adverse effects of very large time delay,which exhibits excellent performance when addressing the extreme conditions at high angles of attack.

Unsteady aerodynamics modeling for flight dynamics application

In view of engineering application, it is practicable to decompose the aerodynamics into three components： the static aerodynamics, the aerodynamic increment due to steady rotations, and the aerodynamic increment due to unsteady separated and vortical flow. The first and the second components can be presented in conventional forms, while the third is described using a one-order differential equation and a radial-basis-function （RBF） network. For an aircraft configuration, the mathematical models of 6- component aerodynamic coefficients are set up from the wind tunnel test data of pitch, yaw, roll, and coupled yawroll large-amplitude oscillations. The flight dynamics of an aircraft is studied by the bifurcation analysis technique in the case of quasi-steady aerodynamics and unsteady aerodynam- ics, respectively. The results show that： （1） unsteady aerodynamics has no effect upon the existence of trim points, but affects their stability; （2） unsteady aerodynamics has great effects upon the existence, stability, and amplitudes of periodic solutions; and （3） unsteady aerodynamics changes the stable regions of trim points obviously. Furthermore, the dynamic responses of the aircraft to elevator deflections are inspected. It is shown that the unsteady aerodynamics is beneficial to dynamic stability for the present aircraft. Finally, the effects of unsteady aerodynamics on the post-stall maneuverability

Subsonic impulsively starting flow at a high angle of attack with shock wave and vortex interaction

Impulsively starting flow, by a sudden attainment of a large angle of attack, has been well studied for incompressible and supersonic flows, but less studied for subsonic flow. Recently,a preliminary numerical study for subsonic starting flow at a high angle of attack displays an advance of stall around a Mach number of 0.5, when compared to other Mach numbers. To see what happens in this special case, we conduct here in this paper a further study for this case, to display and analyze the full flow structures. We find that for a Mach number around 0.5, a local supersonic flow region repeatedly splits and merges, and a pair of left-going and right-going unsteady shock waves are embedded inside the leading edge vortex once it is sufficiently grown up and detached from the leading edge. The flow evolution during the formation of shock waves is displayed in detail. The reason for the formation of these shock waves is explained here using the Laval nozzle flow theory. The existence of this shock pair inside the vortex, for a Mach number only close to 0.5, may help the growing of the trailing edge vortex responsible for the advance of stall observed previously.

Mechanism of perturbation-combined active control technique for asymmetric vortex flow over slender body at high angle of attack

Based on the determinability of asymmetric vortices flow over slender body under changeless round grain at high angle of attack,the effect of microblowing set in special position on the behaviors of asymmetric flow is discussed in this paper,including blowing momentum and circumferential locations of the microblowing hole of 0.5 mm in diameter on nose tip.A new kind of active control technique,named perturbation-combined active control technique,which combines the micro-grain and micro-blowing perturbation,was proposed on the basis of the above.This control technique can not only change the sign of side force of slender body arbitrarily through changing the vortices positions between yaw-left and yaw-right configuration,but also can make the magnitude of side force variable gradually even at bistable state of asymmetric vortex.Finally,the interferential mechanism of the perturbation-combined active control technique has also been concluded from this paper.The tests have been conducted at low speed wind tunnel with subcritical Reynolds number of 1.05×10~5 at angle of attack α=50° in Beihang University,Beijing,China.

Maneuver control at high angle of attack based on real-time optimization of integrated aero-propulsion

To reduce the propulsion system installation thrust loss under high angle of attack maneuvering,a control method based on real-time optimization of the integrated aeropropulsion is proposed.Firstly,based on data fitting and physical principle,an integrated onboard model of propulsion system is established,which can calculate various performance parameters of the propulsion system in real time,and has high accuracy and real-time performance.Secondly,to improve the compatibility of optimization real-time performance and search accuracy,the online optimization control of aero-propulsion system is realized based on an improved trust region algorithm.Finally,by controlling the auxiliary intake valve,a good match between inlet and engine is realized,which solves the problems of intake flow reducing and total pressure recovery coefficient declining,and improves the installation performance of propulsion system.The simulation results indicate that,compared with the conventional independent engine control,the real-time integrated optimization method reduces the installed thrust loss by 3.61%under the design condition,and 4.58%under the off-design condition.Furthermore,the simulation on HIL(Hardware-In-theLoop)platform verifies the real-time performance of integrated optimization method.

RESEARCH ON THE HYSTERESIS PROPERTIES OF UNSTEADY AERODYNAMICS ABOUT THE OSCILLATING WINGS

In the work, it is shown the numerical investigations about the unsteady inviscid results obtained for the pitching oscillating wings at different angles of attack. The results are obtained by solving the unsteady Euler equations in a body_fitted coordinate system. It is based on the four_stage Runge_Kutta time stepping scheme. Meanwhile to increase the time step that is limited by Courant limit (CFL), the implicit residual smoothing with local variable parameters is used. As a result, the unsteady aerodynamics about a rectangular wing and a delta wing, which are oscillated in pitching with different frequencies, are shown in this paper. The properties of the unsteady aerodynamics in these cases are researched here.