Pyridinic nitrogen enriched porous carbon derived from bimetal organic frameworks for high capacity zinc ion hybrid capacitors with remarkable rate capability

Aqueous zinc ion hybrid capacitors(ZIHCs)hold great potential for large-scale energy storage applications owing to their high safety and low cost,but suffer from low capacity and energy density.Herein,pyridinic nitrogen enriched porous carbon(nPC)was successfully synthesized via the growth,subsequent annealing and acid etching of bimetal organic frameworks for high capacity and safe ZIHCs with exceptional rate capability.Benefiting from the mesopores for easy ion diffusion,high electrical conductivity enabled by in-situ grown carbon nanotubes matrix and residual metal Co nanoparticles for fast electron transfer,sufficient micropores and high N content(8.9 at%)with dominated pyridinic N(54%)for enhanced zinc ion storage,the resulting nPC cathodes for ZIHCs achieved high capacities of 302 and137 m Ah g^(-1) at 1 and 18 A g^(-1),outperforming most reported carbon based cathodes.Theoretical results further disclosed that pyridinic N possessed larger binding energy of-4.99 eV to chemically coordinate with Zn2+than other N species.Moreover,quasi-solid-state ZIHCs with gelatin based gel electrolytes exhibited high energy density of 157.6 Wh kg^(-1) at 0.69 kW kg^(-1),high safety and mechanical flexibility to withstand mechanical deformation and drilling.This strategy of developing pyridinic nitrogen enriched porous carbon will pave a new avenue to construct safe ZIHCs with high energy densities.

Comparison of Gas Distribution Properties of Conventional and High Capacity Structured Packings

This paper presents the results of an experimental study carried out using large scale equipment to observe the effect of geometry on gas distribution properties of a high capacity corrugated sheet structured packing （Montz-pak B 1-250M） and to compare it with that of its conventional counterpart （Montz-pak B1-250）. Although the high capacity packing exhibits a significantly lower overall pressure drop, the gas distribution performance is similar to that of the conventional packing, and in both cases consistently good one.

Amorphous phosphorus chalcogenide as an anode material for lithiumion batteries with high capacity and long cycle life

The ever-increasing demands for modern energy storage applications drive the search for novel anode materials of lithium(Li)-ion batteries(LIBs) with high storage capacity and long cycle life, to outperform the conventional LIBs anode materials. Hence, we report amorphous ternary phosphorus chalcogenide(aP_(4)SSe_(2)) as an anode material with high performance for LIBs. Synthesized via the mechanochemistry method, the a-P_(4)SSe_(2) compound is endowed with amorphous feature and offers excellent cycling stability(over 1500 mA h g^(-1) capacity after 425 cycles at 0.3 A g^(-1)), owing to the advantages of isotropic nature and synergistic effect of multielement forming Li-ion conductors during battery operation. Furthermore,as confirmed by ex situ X-ray diffraction(XRD) and transmission electron microscope(TEM), the a-P_(4)SSe_(2)anode material has a reversible and multistage Li-storage mechanism, which is extremely beneficial to long cycle life for batteries. Moreover, the autogenous intermediate electrochemical products with fast ionic conductivity can facilitate Li-ion diffusion effectively. Thus, the a-P_(4)SSe_(2)electrode delivers excellent rate capability(730 mA h g^(-1)capacity at 3 A g^(-1)). Through in situ electrochemical impedance spectra(EIS) measurements, it can be revealed that the resistances of charge transfer(R_(SEI)) and solid electrolyte interphase(R_(Ct)) decrease along with the formation of Li-ion conductors whilst the ohmic resistance(R_(Ω)) remains unchanged during the whole electrochemical process, thus resulting in rapid reaction kinetics and stable electrode to obtain excellent rate performance and cycling ability for LIBs. Moreover, the formation mechanism and electrochemical superiority of the a-P_(4)SSe_(2)phase, and its expansion to P_(4)S_(3-x)Se_(x)(x = 0, 1, 2, 3) family can prove its significance for LIBs.

Enhanced reversible hydrogen storage properties of wrinkled graphene microflowers confined LiBH_(4) system with high volumetric hydrogen storage capacity

LiBH_(4)with high hydrogen storage density,is regarded as one of the most promising hydrogen storage materials.Nevertheless,it suffers from high dehydrogenation temperature and poor reversibility for practical use.Nanoconfinement is effective in achieving low dehydrogenation temperature and favorable reversibility.Besides,graphene can serve as supporting materials for LiBH_(4)catalysts and also destabilize LiBH_(4)via interfacial reaction.However,graphene has never been used alone as a frame material for nanoconfining LiBH_(4).In this study,graphene microflowers with large pore volumes were prepared and used as nanoconfinement framework material for LiBH_(4),and the nanoconfinement effect of graphene was revealed.After loading 70 wt%of LiBH_(4) and mechanically compressed at 350 MPa,8.0 wt% of H2 can be released within 100 min at 320C,corresponding to the highest volumetric hydrogen storage density of 94.9 g H2 L^(-1)ever reported.Thanks to the nanoconfinement of graphene,the rate-limiting step of dehydrogenation of nanoconfined LiBH_(4) was changed and its apparent activation energy of the dehydrogenation(107.3 kJ mol^(-1))was 42%lower than that of pure LiBH_(4).Moreover,the formation of the intermediate Li_(2)B_(12)H_(12) was effectively inhibited,and the stable nanoconfined structure enhanced the reversibility of LiBH_(4).This work widens the understanding of graphene's nanoconfinement effect and provides new insights for developing high-density hydrogen storage materials.

Preparation and Electrochemical Performances of Nickel Metal Hydride Batteries with High Specific Volume Capacity

Cylindrical nickel metal hydride （Ni-MH） battery with high specific volume capacity was prepared by using the oxyhydroxide Ni（OH）2 and AB5 type hydrogen storage alloy and adjusting the designing parameters of positive and negative electrodes. The oxyhydroxide Ni（OH）2 was synthesized by oxidizing spherical β-Ni（OH）2 with chemical method. The X-ray diffraction （XRD） patterns and the Fourier transform infrared （PT-IR） spectra indicated that 7-NiOOH was formed on the oxyhydroxide Ni（OH）2 powders, and some H2O molecules were inserted into their crystal lattice spacing. The battery capacity could not be improved when the oxyhydroxide Ni（OH）2 sample was directly used as the positive active materials. However, based on the conductance and residual capacity of the oxyhydroxide Ni（OH）2 powders, AA size Ni-MH battery with 2560 mA.h capacity and 407 W·h·L^-1 specific volume energy at 0.2C was obtained by using the commercial spherical β-Ni（OH）2 and AB5-type hydrogen-storage alloy powders as the active materials when 10% mass amount of the oxyhydroxide Ni（OH）2 with 2.50 valence was added to the positive active materials and subsequently the battery designing parameters were adjusted as well. The as-prepared battery showed 70% initial capacity after 80 cycles at 0.5C. The possibility for adjusting the capacity ratio of positive and negative electrodes from 1 ： 1.35 to 1 ： 1.22 was demonstrated preliminarily. It is considered the as-prepared battery can meet the requirement of some special portable electrical instruments.

High-capacity Bi_(2)O_(3) anode for 2.4 V neutral aqueous sodium-ion battery-supercapacitor hybrid device through phase conversion mechanism

Aqueous battery-supercapacitor hybrid devices(BSHs)are of great importance to enrich electrochemical energy storage systems with both high energy and power densities.However,further improvement of BSHs in aqueous electrolytes is greatly hampered by operating voltage and capacity limits.Different from the conventional intercalation/de-intercalation mechanism,Bi_(2)O_(3) implements charge storage by a reversible phase conversion mechanism.Herein,taking Bi_(2)O_(3) electrode with wide potential window(from-1.2 to 1 V vs.saturated calomel electrode)and high capacity as battery-type anode,we propose that the overall performance of aqueous BSHs can be greatly upgraded under neutral condition.By paring with stable layer-structuredδ-MnO_(2) cathode,a sodium-ion Bi_(2)O_(3)//MnO_(2) BSH with an ultrahigh voltage of 2.4 V in neutral sodium sulfate electrolyte is developed for the first time.This hybrid device exhibits high capacity(~215 C g^(-1) at 1 mA cm^(-2)),relatively long lifespan(~77.2%capacity retention after 1500 cycles),remarkable energy density(71.7 Wh kg^(-1)@400.5 W kg^(-1))and power density(3204.3 W kg^(-1)@18.8 Wh kg^(-1)).Electrochemical measurements combining a set of spectroscopic techniques reveal the reversible phase conversion between bismuth oxide and metallic bismuth(Bi_(2)O_(3)?Bi0)through Bi^(2+) transition phase in neutral sodium sulfate solution,which can deliver multielectron transfer up to 6,leading to the high-energy BSHs.Our work sheds light on the feasibility of using Bi_(2)O_(3) electrode under neutral condition to address the issue of narrow voltage and low capacity for aqueous BSHs.

Graphene as a High-capacity Anode Material for Lithium Ion Batteries

Graphene was produced via a soft chemistry synthetic route for lithium ion battery applications. The sample was characterized by X-ray diffraction, nitrogen adsorption-desorption, field emission scanning electron microscopy and transmission electron microscopy, respectively. The electrochemical performances of graphene as anode material were measured by cyclic voltammetry and galvanostatic charge/ discharge cycling. The experimental results showed that the graphene possessed a thin wrinkled paper-like morphology and large specific surface area （342 m2 · g ^-1）. The first reversible specific capacity of the graphene was as high as 905 mA· h · g ^-1 at a current density of 100 mA · g ^-1. Even at a high current density of 1000 or 2000 mA · g ^-1, the graphene maintained good cycling stability, indicating that it is a promising anode material for high-performance lithium ion batteries.

Universal organic anodes enable safe low-cost aqueous rechargeable batteries with long cycle life,high capacity, and fast kinetics

Future battery advances and economies of scale will help scrub CO2emissions from transportation and the grid.Economical energy storage lets battery-powered electric vehicles replace internal combustion engines in the transportation sector,which now accounts for the plurality of CO2emissions.For grid-scale applications,the benefits of adding storage are many and well documented[1–2].Beyond increased penetration of intermittent renewable energy generated from such as solar panels

Pseudocapacitive Heteroatom-Doped Carbon Cathode for Aluminum-Ion Batteries with Ultrahigh Reversible Stability

Aluminum(Al)-ion batteries have emerged as a potential alternative to conventional ion batteries that rely on less abundant and costly materials like lithium.Nonetheless,given the nascent stage of advancement in Al-ion batteries(AIBs),attaining electrode materials that can leverage both intercalation capacity and structural stability remains challenging.Herein,we demonstrate a C3N4-derived layered N,S heteroatom-doped carbon,obtained at different pyrolysis temperatures,as a cathode material for AIBs,encompassing the diffusion-controlled intercalation and surface-induced capacity with ultrahigh reversibility.The developed layered N,S-doped corbon(N,S-C)cathode,synthesized at 900℃,delivers a specific capacity of 330 mAhg^(-1)with a relatively high coulombic efficiency of~85%after 500 cycles under a current density of 0.5 A g^(-1).Owing to its reinforced adsorption capability and enlarged interlayer spacing by doping N and S heteroatoms,the N,S-C900 cathode demonstrates outstanding energy storage capacity with excellent rate performance(61 mAhg^(-1)at 20 A g^(-1))and ultrahigh reversibility(90 mAhg^(-1)at 5Ag^(-1)after 10000cycles).

Regulating intramolecular hydrogen bonds of p-phenylenediimidazole-based small-molecule compounds towards the enhanced lithium storage capacity

The use of redox-active organic electrode materials in energy storage is restricted due to their inferior solvent resistance,abysmal conductivity,and the resultant low practical capacity.To address these issues,a class of bipolar p-phenylenediimidazole-based small-molecule compounds are designed and fabricated.Theπ-conjugated backbone of these small molecules allows for electron delocalization on a big conjugation plane,endowing them with good conductivity and reaction reversibility.Furthermore,when the para-positions of phenylene are occupied by hydroxyl groups,as-formed intramolecular hydrogen bonds(N-H...O)between phenolic hydroxyl groups and the–NH groups of imidazole rings further enhance the structural planarity,resulting in higherπ-conjugation degree and better conductivity,and thus higher utilization of active sites and electrode capacity,proved by both experimental results and theoretical calculations.The optimized composite electrode DBNQ@rGO-45 shows a high specific capacity(∼308 mA h g^(−1)at 100 mA g^(−1))and a long cycling stability(112.9 mA h g^(−1)after 6000 cycles at 2000 mA g^(−1)).The significantly better electrochemical properties for hydroxyl group-containing compounds than those without hydroxyl groups attributed to intramolecular hydrogen bond-induced conjugation enhancement will inspire the structure design of organic electrodes for better energy storage.

Extreme high reversible capacity with over 8.0 wt% and excellent hydrogen storage properties of MgH2 combined with LiBH4 and Li3AlH6

Magnesium hydride has attracted great attention because of its high theoretical capacity and outstanding reversibility, nevertheless, its practical applications have been restricted by the disadvantages of the sluggish kinetics and high thermodynamic stability. In this work, an unexpected high reversible hydrogen capacity over 8.0 wt% has been achieved from MgH2 metal hydride composited with small amounts of LiBH4 and Li3AlH6 complex hydrides, which begins to release hydrogen at 276 ℃ and then completely dehydrogenates at 360 ℃. The dehydrogenated MgH2+LiBH4/Li3AlH6 composite can fully reabsorb hydrogen below 300 ℃ with an excellent cycling stability. The composite exhibits a significant reduction of dehydrogenation activation energy from 279.7 kJ/mol(primitive MgH2) to 139.3 kJ/mol(MgH2+LiBH4/Li3AlH6),as well as a remarkable reduction of dehydrogenation enthalpy change from 75.1 k J/mol H2(primitive MgH2) to 62.8 kJ/mol H2(MgH2+LiBH4/Li3AlH6). The additives of LiBH4 and Li3AlH6 not only enhance the cycling hydrogen capacity, but also simultaneously improve the reversible de/rehydrogenation kinetics, as well as the dehydrogenation thermodynamics. This notable improvement on the hydrogen absorption/desorption behaviors of the MgH2+LiBH4/Li3AlH6 composite could be attributed to the dehydrogenated products including Li3Mg7, Mg17Al12 and MgAlB4, which play a key role on reducing the dehydrogenation activation energy and increasing diffusion rate of hydrogen. Meanwhile, the LiBH4 and Li3AlH6 effectively destabilize MgH2 with a remarkable reduction on dehydrogenation enthalpy change in terms of thermodynamics. In particular, the Li3Mg7, Mg17Al12 and MgAlB4 phases can reversibly transform into MgH2, Li3AlH6 and LiBH4 after rehydrogenation, which contribute to maintain a high cycling capacity.This constructing strategy can further promote the development of high reversible capacity Mg-based materials with suitable de/rehydrogenation properties.

Development of High Areal Capacity Electrolytic MnO_(2)-Zn Battery via an Iodine Mediator

The commercialization of electrolytic MnO_(2)-Zn batteries is highly applauded owing to the advantages of cost-effectiveness,high safety,high energy density,and durable working performance.However,due to the low reversibility of the cathode MnO_(2)/Mn^(2+)chemistry at high areal capacities and the severe Zn anode corrosion,the practical application of MnO_(2)-Zn batteries is hampered by inadequate lifespan.Leveraging the full advantage of an iodine redox mediator,here we design a highly rechargeable electrolytic MnO_(2)-Zn battery with a high areal capacity.The MnO_(2)-Zn battery coupled with an iodine mediator in a mild electrolyte shows a high discharge voltage of 1.85 V and a robust areal capacity of 10 mAh cm^(-2)under a substantial discharge current density of 160 mA cm^(-2).The MnO_(2)/I_(2)-Zn battery with an areal capacity of 10 mAh cm^(-2)exhibits prolonged stability of over 950 cycles under a high-capacity retention of~94%.The scaled-up MnO_(2)/I_(2)-Zn battery reveals a stable cycle life under a cell capacity of~600 mAh.Moreover,our constructed MnO_(2)/I_(2)-Zn battery demonstrates a practical energy density of~37 Wh kg^(-1)and a competitive energy cost of<18 US$kWh^(-1)by taking into account the cathode,anode,and electrolyte.The MnO_(2)/I_(2)-Zn battery,with its remarkable reversibility and reasonable energy density,enlightens a new arena of large-scale energy storage devices.

High capacity reversible data hiding in encrypted images based on adaptive quadtree partitioning and MSB prediction

To improve the embedding capacity of reversible data hiding in encrypted images(RDH-EI),a new RDH-EI scheme is proposed based on adaptive quadtree partitioning and most significant bit(MSB)prediction.First,according to the smoothness of the image,the image is partitioned into blocks based on adaptive quadtree partitioning,and then blocks of different sizes are encrypted and scrambled at the block level to resist the analysis of the encrypted images.In the data embedding stage,the adaptive MSB prediction method proposed by Wang and He(2022)is improved by taking the upper-left pixel in the block as the target pixel,to predict other pixels to free up more embedding space.To the best of our knowledge,quadtree partitioning is first applied to RDH-EI.Simulation results show that the proposed method is reversible and separable,and that its average embedding capacity is improved.For gray images with a size of 512×512,the average embedding capacity is increased by 25565 bits.For all smooth images with improved embedding capacity,the average embedding capacity is increased by about 35530 bits.

“All‐In‐One” integrated ultrathin SnS2@3D multichannel carbon matrix power high‐areal–capacity lithium battery anode

Construction of a thickness‐independent electrode with high active material mass loading is crucial for the development of high energy rechargeable lithium battery.Herein,we fabricate an all‐in‐one integrated SnS2@3D multichannel carbon matrix(SnS2@3DMCM)electrode with in‐situ growth of ultrathin SnS2 nanosheets inside the inner walls of three dimensional(3D)multichannels.The interconnected conductive carbon matrix derived from natural wood acts as an integrated porous current collector to avail the electrons transport and accommodate massive SnS2 nanosheets,while plenty of 3D aligned multichannels facilitate fast ions transport with electrode thickness‐independent even under high mass loading.As expected,the integrated SnS2@3DMCM electrode exhibits remarkable electrochemical lithium storage performance,such as exceptional high‐areal‐capacity of 6.4 mAh cm−2,high rate capability of 3 mAh cm−2 under current of 6.8 mAcm−2(10 C),and stable cycling performance of 6.8 mAcm−2 with a high mass loading of 7mg cm−2.The 3D integrated porous electrode constructing conveniently with the natural source paves new avenues towards future high‐performance lithium batteries.

A Novel Soft Start Method of Super Large Capacity High Voltage Motor

The large current generated by starting directly of super large capacity and high voltage induction motor would have a huge impact on the grid as well as the motor itself.The variation of the power factor and electromagnetic torque during direct start of motors with different capacity and voltage levels are obtained.Aiming at the problem that the secondary impact of auto-transformer starter is too large and the cost of magnetic control starter is too high,the auto-transformer and magnetic control soft start method of super large capacity and high voltage motor is proposed and the basic working principle is analyzed.The calculation formula of cost for magnetic control soft starter and auto-transformer and magnetic control soft starter is deduced,and specific examples are analyzed and compared.It is concluded that the choice of auto-transformer with appropriate tapping ratio can greatly reduce the cost of auto-transformer and magnetic control soft starter compared with the other one.Finally,the simulation and experiment results show that the start method can effectively avoid secondary current impact and constrain the motor starting current to less than 2.5 times the rated current.

Maximum heat transfer capacity of high temperature heat pipe with triangular grooved wick

A mathematical model was developed to predict the maximum heat transfer capacity of high temperature heat pipe with triangular grooved wick. The effects of the inclination angle and geometry structure were considered in the proposed model.Maximum heat transfer capacity was also investigated experimentally. The model was validated by comparing with the experimental results. The maximum heat transfer capacity increases with the vapor core radius increasing. Compared with the inclination angle of0°, the maximum heat transfer capacity increases at the larger inclination angle, and the change with temperature is larger. The performance of heat pipe with triangular grooved wick is greatly influenced by gravity, so it is not recommended to be applied to the dish solar heat pipe receiver.

A high Li-ion diffusion kinetics in multidimensional and compact-structured electrodes via vacuum filtration casting

Manufacturing process,diffusion co-efficient and areal capacity are the three main criteria for regulating thick electrodes for lithium-ion batteries(LIBs).However,simultaneously regulating these criteria for LIBs is desirable but remains a significant challenge.In this work,niobium pentoxide(Nb_(2)O_(5))anode and lithium iron phosphate(LiFePO_(4))cathode materials were chosen as the model materials and demonstrate that these three parameters can be simultaneously modulated by incorporation of micro-carbon fibers(MCF)and carbon nanotubes(CNT)with both Nb_(2)O_(5) and LFP via vacuum filtration approach.Both as-prepared MNC-20 anode and MLC-20 cathode achieves high reversible areal capacity of≈5.4 m A h cm^(-2)@0.1 C and outstanding Li-ion diffusion coefficients of≈10~(-8)cm~2 s~(-1)in the half-cell configuration.The assembled MNC-20‖MLC-20 full cell LIB delivers maximum energy and power densities of244.04 W h kg^(-1)and 108.86 W kg^(-1),respectively.The excellent electrochemical properties of the asprepared thick electrodes can be attributed to the highly conductive,mechanical compactness and multidimensional mutual effects of the MCF,CNT and active materials that facilitates rapid Li-ion diffusion kinetics.Furthermore,electrochemical impedance spectroscopy(EIS),symmetric cells analysis,and insitu Raman techniques clearly validates the enhanced Li-ion diffusion kinetics in the present architecture.

Free-standing ultrathick LiMn_(2)O_(4)@single-wall carbon nanotubes electrode with high areal capacity

The ever-increasing demands for advanced lithium-ion batteries with high energy density have greatly stimulated the pursuit of thick electrodes with high active material loading.However,it is not feasible to prepare thick electrodes with traditional coating methods due to mechanical instability.Herein,using single-wall carbon nanotubes(SWCNT)as conductive carbon and binder,free-standing LiMn_(2)O_(4) thick electrodes(F-LMO)with ultrahigh-mass loading up to~190 mg cm^(-2)were prepared by vacuum filtration combined with freeze-drying.The thick electrodes with~30 mg cm^(-2)mass loading achieved a high specific capacity of 106.7 mAh g^(-1)with a good capacity retention of 94%over 50 cycles at 0.5 C,which was superior to the traditional coating electrodes(~20 mg cm^(-2))of 99.3 mAh g^(-1)with 95%because of the enhanced electronic conductivity originated from SWCNT.In addition,the high active material ratio of 97.5 wt%,near-theoretical reversible capacity,and high mass loading gave ultrathick F-LMO electrodes(600μm)of~190 mg cm^(-2)with a remarkable areal capacity of 20 mAh cm^(-2).Moreover,the concentration polarization that occurred in the thick F-LMO electrodes under high current density was discussed via electrochemical stimulation.

A superhigh discharge capacity induced by a synergetic effect between high-surface-area carbons and a carbon paper current collector in a lithium–oxygen battery

This paper invesitages the synergetic effect between high-surface-area carbons, such as Ketjan Black(KB) or Super P(SP) carbon materials, and low-surface-area carbon paper(CP) current collectors and it also examines their influence on the discharge performance of nonaqueous Li–O2cells. Ultra-large specific discharge capacities are found in the KB/CP cathodes, which are much greater than those observed in the individual KB or CP cathodes. Detailed analysis indicates that such unexpectedly large capacities result from the synergetic effect between the two components. During the initial discharges of KB or SP materials, a large number of superoxide radical(O·-2) species in the electrolytes and Li2O2 nuclei at the CP surfaces are formed, which activate the CP current collectors to contribute considerable capacities. These results imply that CP could be a superior material for current collectors in terms of its contribution to the overall discharge capacity.On the other hand, we should be careful to calculate the specific capacities of the oxygen cathodes when using CP as a current collector; i.e., ignoring the contribution from the CP may cause overstated discharge capacities.

A Stretchable Ionic Conductive Elastomer for High-Areal-Capacity Lithium-Metal Batteries

Developing high-areal-capacity and dendrite-free lithium(Li)anodes is of significant importance for the practical applications of the Li-metal secondary batteries.Herein,an effective strategy to stabilize the high-arealcapacity Li electrodeposition by modifying the Li metal with a stretchable ionic conductive elastomer(ICE)is demonstrated.The ICE layer prepared via an instant photocuring process shows a promising Li^(+)-ion conductivity at room temperature.When being used in Li-metal batteries,the thin ICE coating(~0.27μm)acts as both a stretchable constraint to minimize the Li loss and a protective layer to facilitate the uniform flux of Li ions.With this ICE-modifying strategy,the reversibility and cyclability of the Li anodes under high-areal-capacity condition in carbonate electrolyte are significantly improved,leading to a stable Li stripping/plating for 500 h at an ultrahigh areal capacity of 20 mAh cm^(-2)in commercial carbonate electrolyte.When coupled with industry-level thick LiFePO;electrodes(20.0 mg cm^(-2)),the cells with ICE-Li anodes show significantly enhanced rate and cycling capability.