During high speed machining in the field of manufacture,chip formation is a severe plastic deformation process including large strain,high strain rate and high temperature.And the strain rate in high speed cutting pro...During high speed machining in the field of manufacture,chip formation is a severe plastic deformation process including large strain,high strain rate and high temperature.And the strain rate in high speed cutting process can be achieved to 105 s^（-1）.30CrMnSiNi2Asteel is a kind of important high-strength low-alloy structural steel with wide application range.Obtaining the dynamic mechanical properties of30CrMnSiNi2Aunder the conditions of high strain rate and high temperature is necessary to construct the constitutive relation model for high speed machining.The dynamic compressive mechanical properties of30CrMnSiNi2Asteel were studied using split Hopkinson pressure bar（SHPB）tests at 30-700°C and3000-10000s^（-1）.The stress-strain curves of 30CrMnSiNi2Asteel at different temperatures and strain rates were investigated,and the strain hardening effect and temperature effect were discussed.Experimental results show that 30CrMnSiNi2Ahas obvious temperature sensitivity at 300°C.Moreover,the flow stress decreased significantly with the increase of temperature.The strain hardening effect of the material at high strain rate is not significant with the increase of strain.The strain rate hardening effect is obvious with increasing the temperature.According to the experimental results,the established Johnson-Cook（J-C）constitutive model of 30CrMnSiNi2Asteel could be used at high strain rate and high temperature.展开更多
An example of post-noon ionospheric absorption observed by the imaging riometers at Ny-Alesund / Danmarkshavn in the arctic region and Zhongshan Station in Antarctic is presented. The post-noon absorption observed sim...An example of post-noon ionospheric absorption observed by the imaging riometers at Ny-Alesund / Danmarkshavn in the arctic region and Zhongshan Station in Antarctic is presented. The post-noon absorption observed simultaneously between the hemispherical stations was a spike-type with weak intensity (<1 dB) during the high solar wind dynamic pressure. The absorption spikes might be caused by precipitation of highrenergy electrons (30 - 300 keV) in the closed dayside magnetosphere. It should be noted that the precipitation region of the absorption spike associated with the steep pressure increase (~ 13 nPa) was localized and shifted equatorward.展开更多
基金supported by the National High Technology Research and Development Program of China(2014AA041504)the National Natural Science Foundation of China(51605161)
文摘During high speed machining in the field of manufacture,chip formation is a severe plastic deformation process including large strain,high strain rate and high temperature.And the strain rate in high speed cutting process can be achieved to 105 s^（-1）.30CrMnSiNi2Asteel is a kind of important high-strength low-alloy structural steel with wide application range.Obtaining the dynamic mechanical properties of30CrMnSiNi2Aunder the conditions of high strain rate and high temperature is necessary to construct the constitutive relation model for high speed machining.The dynamic compressive mechanical properties of30CrMnSiNi2Asteel were studied using split Hopkinson pressure bar（SHPB）tests at 30-700°C and3000-10000s^（-1）.The stress-strain curves of 30CrMnSiNi2Asteel at different temperatures and strain rates were investigated,and the strain hardening effect and temperature effect were discussed.Experimental results show that 30CrMnSiNi2Ahas obvious temperature sensitivity at 300°C.Moreover,the flow stress decreased significantly with the increase of temperature.The strain hardening effect of the material at high strain rate is not significant with the increase of strain.The strain rate hardening effect is obvious with increasing the temperature.According to the experimental results,the established Johnson-Cook（J-C）constitutive model of 30CrMnSiNi2Asteel could be used at high strain rate and high temperature.
文摘An example of post-noon ionospheric absorption observed by the imaging riometers at Ny-Alesund / Danmarkshavn in the arctic region and Zhongshan Station in Antarctic is presented. The post-noon absorption observed simultaneously between the hemispherical stations was a spike-type with weak intensity (<1 dB) during the high solar wind dynamic pressure. The absorption spikes might be caused by precipitation of highrenergy electrons (30 - 300 keV) in the closed dayside magnetosphere. It should be noted that the precipitation region of the absorption spike associated with the steep pressure increase (~ 13 nPa) was localized and shifted equatorward.
