Multi-layer quasi-zero-stiffness meta-structure for high-efficiency vibration isolation at low frequency

An easily stackable multi-layer quasi-zero-stiffness(ML-QZS)meta-structure is proposed to achieve highly efficient vibration isolation performance at low frequency.First,the distributed shape optimization method is used to design the unit cel,i.e.,the single-layer QZS(SL-QZS)meta-structure.Second,the stiffness feature of the unit cell is investigated and verified through static experiments.Third,the unit cells are stacked one by one along the direction of vibration isolation,and thus the ML-QZS meta-structure is constructed.Fourth,the dynamic modeling of the ML-QZS vibration isolation metastructure is conducted,and the dynamic responses are obtained from the equations of motion,and verified by finite element(FE)simulations.Finally,a prototype of the ML-QZS vibration isolation meta-structure is fabricated by additive manufacturing,and the vibration isolation performance is evaluated experimentally.The results show that the vibration isolation performance substantially enhances when the number of unit cells increases.More importantly,the ML-QZS meta-structure can be easily extended in the direction of vibration isolation when the unit cells are properly stacked.Hence,the ML-FQZS vibration isolation meta-structure should be a fascinating solution for highly efficient vibration isolation performance at low frequency.

A hierarchical salt-rejection strategy for sustainable and high-efficiency solar-driven desalination

Solar steam generation(SSG)is widely regarded as one of the most sustainable technologies for seawater desalination.However,salt fouling severely compromises the evaporation performance and lifetime of evaporators,limiting their practical applications.Herein,we propose a hierarchical salt-rejection(HSR)strategy to prevent salt precipitation during long-term evaporation while maintaining a rapid evaporation rate,even in high-salinity brine.The salt diffusion process is segmented into three steps—insulation,branching diffusion,and arterial transport—that significantly enhance the salt-resistance properties of the evaporator.Moreover,the HSR strategy overcomes the tradeoff between salt resistance and evaporation rate.Consequently,a high evaporation rate of 2.84 kg m^(-2) h^(-1),stable evaporation for 7 days cyclic tests in 20 wt%NaCl solution,and continuous operation for 170 h in natural seawater under 1 sun illumination were achieved.Compared with control evaporators,the HSR evaporator exhibited a>54%enhancement in total water evaporation mass during 24 h continuous evaporation in 20 wt%salt water.Furthermore,a water collection device equipped with the HSR evaporator realized a high water purification rate(1.1 kg m^(-2) h^(-1)),highlighting its potential for agricultural applications.

Effect of high-multiple water injection on rock pore structure and oil displacement efficiency

Experimental methods,including mercury pressure,nuclear magnetic resonance(NMR)and core(wateroil)displacement,are used to examine the effects of high-multiple water injection(i.e.water injection with high injected pore volume)on rock properties,pore structure and oil displacement efficiency of an oilfield in the western South China Sea.The results show an increase in the permeability of rocks along with particle migration,an increase in the pore volume and the average pore throat radius,and enhanced heterogeneity after high-multiple water injection.Compared with normal water injection methods,a high-multiple water injection is more effective in improving the oil displacement efficiency.The degree of recovery increases faster in the early stage due to the expansion of the swept area,and the transition from oil-wet to water-wet.The degree of recovery increases less in the late stage due to various factors,including the enhancement of heterogeneity in the rocks.Considering both the economic aspect and the production limit of water flooding,it is recommended to adopt other technologies to further enhance oil recovery after 300 PV water injection.

High Energy Efficiency Dynamic Connected Hybrid Precoding for mm Wave Massive MIMO Systems

This paper considers a high energy efficiency dynamic connected(HEDC)structure,which promotes the practicability and reduces the power consumption of hybrid precoding system by lowresolution phase shifters(PSs).Based on the proposed structure,a new hybrid precoding algorithm is presented to optimize the energy efficiency,namely,HP-HEDC algorithm.Firstly,via a new defined effective optimal precoding matrix,the problem of optimizing the analog switch precoding matrix is formulated as a sparse representation problem.Thus,the optimal analog switch precoding matrix can be readily obtained by the branch-and-bound method.Then,the digital precoding matrix optimization problem is modeled as a dictionary update problem and solved by the method of optimal direction(MOD).Finally,the diagonal entries of the analog PS precoding matrix are optimized by exhaustive search independently since PS and antenna is one-to-one.Simulation results show that the HEDC structure enjoys low power consumption and satisfactory spectral efficiency.The proposed algorithm presents at least 50%energy efficiency improvement compared with other algorithms when the PS resolution is set as 3-bit.

High Efficiency Formamidinium-Cesium Perovskite-Based Radio-Photovoltaic Cells

Radio-photovoltaic cell is a micro nuclear battery for devices operating in extreme environments,which converts the decay energy of a radioisotope into electric energy by using a phosphor and a photovoltaic converter.Many phosphors with high light yield and good environmental stability have been developed,but the performance of radio-photovoltaic cells remains far behind expectations in terms of power density and power conversion efficiency,because of the poor photoelectric conversion efficiency of traditional photovoltaic converters under low-light conditions.This paper reports an radio-photovoltaic cell based on an intrinsically stable formamidinium-cesium perovskite photovoltaic converter exhibiting a wide light wavelength response from 300 to 800 nm,high open-circuit voltage(V_(oc)),and remarkable efficiency at low-light intensity.When a He ions accelerator is adopted as a mimickedαradioisotope source with an equivalent activity of 0.83 mCi cm^(-2),the formamidinium-cesium perovskite radio-photovoltaic cell achieves a V_(oc)of 0.498 V,a short-circuit current(J_(sc))of 423.94 nA cm^(-2),and a remarkable power conversion efficiency of 0.886%,which is 6.6 times that of the Si reference radio-photovoltaic cell,as well as the highest among all radio-photovoltaic cells reported so far.This work provides a theoretical basis for enhancing the performance of radio-photovoltaic cells.

High-Efficiency Dynamic Scanning Strategy for Powder Bed Fusion by Controlling Temperature Field of the Heat-Affected Zone

Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion(PBF)process.In this study,a dynamic monitoring and feedback system of powder bed temperature field using an infrared thermal imager has been established and integrated into a four-laser PBF equipment with a working area of 2000 mm×2000 mm.The heat-affected zone(HAZ)temperature field has been controlled by adjusting the scanning speed dynamically.Simultaneously,the relationship among spot size,HAZ temperature,and part performance has been established.The fluctuation of the HAZ temperature in four-laser scanning areas was decreased from 30.85℃to 17.41℃.Thus,the consistency of the sintering performance of the produced large component has been improved.Based on the controllable temperature field,a dynamically adjusting strategy for laser spot size was proposed,by which the fabrication efficiency was improved up to 65.38%.The current research results were of great significance to the further industrial applications of large-scale PBF equipment.

A Loss-model-based Efficiency Optimization Control Method for Induction Traction System of High-speed Train under Emergency Self-propelled Mode

Increasing attention has been paid to the efficiency improvement of the induction traction system of high-speed trains due to the high demand for energy saving. In emergency self-propelled mode, however, the dc-link voltage and the traction power of the motor are significantly reduced, resulting in decreased traction efficiency due to the low load and low speed operations. Aiming to tackle this problem, a novel efficiency improved control method is introduced to the emergency mode of high-speed train traction system in this paper. In the proposed method, a total loss model of induction motor considering the behaviors of both iron and copper loss is established. An improved iterative algorithm with decreased computational burden is then introduced, resulting in a fast solving of the optimal flux reference for loss minimization at each control period. In addition, considering the parameter variation problem due to the low load and low speed operations, a parameter estimation method is integrated to improve the controller's robustness. The effectiveness of the proposed method on efficiency improvement at low voltage and low load conditions is demonstrated by simulated and experimental results.

Precursor engineering enables high-performance all-inorganic CsPbIBr_(2) perovskite solar cells with a record efficiency approaching 13%

All-inorganic CsPbIBr_(2) perovskite has attracted widespread attention in photovoltaic and other optoelectronic devices because of its superior thermal stability.However,the deposition of high-quality solutionprocessed CsPbIBr_(2) perovskite films with large thicknesses remains challenging.Here,we develop a triple-component precursor(TCP) by employing lead bromide,lead iodide,and cesium bromide,to replace the most commonly used double-component precursor(DCP) consisting of lead bromide and cesium iodide.Remarkably,the TCP system significantly increases the solution concentration to 1.3 M,leading to a larger film thickness(~390 nm) and enhanced light absorption.The resultant CsPbIBr_(2) films were evaluated in planar n-i-p structured solar cells,which exhibit a considerably higher optimal photocurrent density of 11.50 mA cm^(-2) in comparison to that of DCP-based devices(10.69 mA cm^(-2)).By adopting an organic surface passivator,the maximum device efficiency using TCP is further boosted to a record efficiency of 12.8% for CsPbIBr_(2) perovskite solar cells.

Zhejiang’s Push for Higher Efficiency in Government Services

A band of programs have been implemented in Zhejiang with the aim of streamlining administrative processes in the public interest.ENHANCING executive efficiency remains one of the priorities of east China’s Zhejiang Province,a coastal economic powerhouse.Over the past decade,it has launched a series of reforms to improve government performance and to better serve businesses and residents.

GHz photon-number resolving detection with high detection efficiency and low noise by ultra-narrowband interference circuits

We demonstrate the photon-number resolution(PNR)capability of a 1.25 GHz gated InGaAs single-photon avalanche photodiode(APD)that is equipped with a simple,low-distortion ultra-narrowband interference circuit for the rejection of its background capacitive response.Through discriminating the avalanche current amplitude,we are able to resolve up to four detected photons in a single detection gate with a detection efficiency as high as 45%.The PNR capability is limited by the avalanche current saturation,and can be increased to five photons at a lower detection efficiency of 34%.The PNR capability,combined with high efficiency and low noise,will find applications in quantum information processing technique based on photonic qubits.

PHUI-GA: GPU-based efficiency evolutionary algorithm for mining high utility itemsets

Evolutionary algorithms(EAs)have been used in high utility itemset mining(HUIM)to address the problem of discover-ing high utility itemsets(HUIs)in the exponential search space.EAs have good running and mining performance,but they still require huge computational resource and may miss many HUIs.Due to the good combination of EA and graphics processing unit(GPU),we propose a parallel genetic algorithm(GA)based on the platform of GPU for mining HUIM(PHUI-GA).The evolution steps with improvements are performed in central processing unit(CPU)and the CPU intensive steps are sent to GPU to eva-luate with multi-threaded processors.Experiments show that the mining performance of PHUI-GA outperforms the existing EAs.When mining 90%HUIs,the PHUI-GA is up to 188 times better than the existing EAs and up to 36 times better than the CPU parallel approach.

Progress in the Breeding of Soybean for High Photosynthetic Efficiency

Studies for many years have indicated that the seed yield of (Glycine max L. Merr.) soybean can be increased by increasing photosynthetic efficiency. The yield of cultivars with high photosynthetic efficiency (HPE) increased by 30% - 40% in comparison with the cultivars with normal photosynthetic efficiency, indicating that the breeding of soybean by increasing RPE may have a bright prospect. HPE breeding can be used as the temporal monitoring in the breeding process to avoid the divergency of the predetermined goal, although HPE breeding does not shorten the breeding time. It was observed that limited C-4 pathway exists in soybean leaf and pod, suggesting that by increasing the genetic expression of some C-4 enzymes in C-3 crops through traditional or genetic engineering techniques, new breakthroughs in increasing the photosynthetic efficiency of C-3 plant may be practicable in the future.

DEVELOPMENT AND EXPERIMENT OF NEW AlTiN COATED DRILLS FOR HIGH EFFICIENCY DRY DRILLING OF 40Cr

Two new AlTiN coated cemented carbide drills with Al content of 40% and 55% in weight are developed for high efficiency dry drilling of 40Cr. By studying tool durability, machined hole quality, tool wear mechanism, chip deformation, and lubrication, the dry drilling performance of the two kinds of coated drills is analyzed. Experimental results show that the AlTiN coated drills are suitable for high efficiency dry drilling and can obtain higher quality of machined holes. The tool durability of the drill with 55% Al content is 1. 3 times of that of the drill with 40% Al content at the cutting speed of 90 m/min. The wear mechanism of two AlTiN coatings are studied in experiments. During dry drilling process, oxidative wear appears in both two kinds of drills. The oxide film is formed on the top of the coated drill containing Al content of 55%. And the oxide film helps to increase its high temperature resistance and decrease the coating flaking, thus the drill is failed because of coating subsidence. The drill with less Al content is failed due to peeling and breakage. The lubricated condition in dry drilling is improved by the high Al content coating. It helps to reduce the cutting deformation and benefits to improve the quality of machined holes. The AlTiN coating with higher Al content shows longer tool life and higher quality of machined holes in high efficiency dry drilling. Its tool life increases by 30% compared with that of the coating with less Al content.

Differentiation of Barley Genotypes with High Phosphorus Efficiency under Low Phosphorus Stress

[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to explore the relationship be-tween agronomic traits and row type with phosphorus efficiency. [Method] Under available phosphorus mass fractions of 1.32 and 36.6 mg/kg, 172 barley varieties, including 79 two-rowed foreign barley, 22 multiple-rowed foreign barley, 58 two-rowed Chinese barley and 13 multiple-rowed Chinese barley, were selected to com-pare differences in phosphorus efficiency-related agronomic traits. Plant height, spike length, number of unfil ed grains, number of unfil ed grains, main panicle weight, to-tal panicle weight, total stem weight, weight of aerial part and heading stage were surveyed for statistical analysis. [Result] The results showed that, various agronomic traits were larger under fertilization condition than under non-fertilization condition ex-cept number of unfil ed grains and heading stage. Plant high, spike length, weight of aerial part and heading stage varied greatly under non-fertilization condition; number of fil ed grains, number of unfil ed grains and total stem weight varied greatly under fertilization condition. In two-rowed barley, plant height and number of fil ed grains of Chinese varieties were higher than those of foreign varieties, while other agronomic traits such as spike length, number of unfil ed grains, main panicle weight, total panicle weight, total stem weight, weight of aerial part and heading stage of foreign varieties were higher than those of Chinese varieties. Spike length and weight of aerial part in multiple-rowed and two-rowed foreign barley were higher than those in Chinese barley. In multiple-rowed barley, plant height, number of unfil ed grains, total panicle weight and total stem weight of foreign varieties were higher under non-fer-tilization condition and lower under fertilization condition compared with those of Chi-nese varieties; number of fil ed grains, main panicle weight and heading stage of foreign varieties were lower under non-fertilization condition and higher under fertil-ization condition compared with those of Chinese varieties. [Conclusion] Heading stage, number of fil ed grains, number of unfil ed grains and total stem weight are more sensitive to phosphorus efficiency. Multiple-rowed barley is more sensitive to phosphorus efficiency than two-rowed barley.

HIGH EFFICIENCY COOLING TECHNOLOGY BASED ON GREEN MANUFACTURING

Green manufacturing （GM） and high efficiency machining technology are inevitable trends in the field of advanced manufacturing of the 21st century. To ensure green and high-efficiency machining, a new high efficiency cooling technology-cryogenic pneumatic mist jet impinging cooling （CPMJI） technology is presented. For obtaining the best cooling effect, a little quantity of coolant is carried by high speed cryogenic air （-20 C ） and reaches the machining zone in the form of mist jet to enhance heat transfer. Experimental results indicate that under the conditions of 40 m/s in the jet impinging speed and 10 mm in the jet impinging distance, the critical heat flux（CHF） nearly reaches 6× 10^7 W/m^2, more than six times of the CHF of the grinding burn with a value of （8～10）×10^6 W/m^2.

Analysis of High Yield and Efficiency Technique in Hybrid Rice Zhongzheyou No.1

To understand the high yield and efficiency technique in hybrid rice Zhongzheyou No. 1, we conducted the correlation analysis, regression analysis and path analysis of hybrid rice Zhongzheyou No. 1 based on the data of its ear, grain and weight at different yield levels. From this study, we put forward the high yield and efficiency technique in Zhongzheyou No. 1 .. on the basis of certain effective ear number, filled grains per ear should be mainly targeted with a consideration to 1 000-grain weight.

Analysis on Absorption,Utilization and Transfer Efficiency of Nitrogen in High-yield Wheat Cultivars at Different Sowing Dates

This study aimed to analyze the absorption, utilization and transfer char- acteristics of nitrogen in high-yield winter wheat （Triticum aestivum） cultivars at dif- ferent sowing dates, so as to determine the optimum sowing dates for different high-yield wheat cultivars. A field experiment was conducted in the Shajiang black soil of Anhui Province with Jimai 22, Wanrnai 52 and Zhoumai 22, and the effects of early sowing （October 3）, optimum sowing （October 12） and late sowing （October 30） on wheat plant N content and accumulation, pre-and post-anthesis N accumula- tion （NA） of total plant, nitrogen remobUization to grain （NR）, N remobilization effi- ciency （NRE）, contribution of N remobilized to grain （NRC）, grain yield, N use effi- ciency （NUE） and N harvest index （NHI） of different wheat cultivar were investigat- ed. The results showed that sowing date had an impact on N content, absorption and utilization in wheat plants at various growth stages. The NA, NR and NRC of aboveground vegetative organs of wheat before anthesis were higher than those af- ter anthesis. Under the condition of late sowing, the grain N accumulation mainly depended on the N absorption by vegetative organs before anthesis. Under the conditions of optimum and early sowing, the absorbed N after anthesis accounted for a large proportion in grain N accumulation. The N uptake intensity and relative cumulative rate differed greatly among different growth stages and different-genotype wheat cultivars, and the pre-anthesis NA, pre-anthesis NR, pre-anthesis NRE, post- anthesis N assimilation amount and post-anthesis NRC showed significant differ- ences among different wheat cultivars. The grain yields of different wheat cultivars under the early and optimum sowing were all higher than those under the late sowing. The NHI and grain N accumulation were highest under the optimum sow- ing, and the latter significantly decreased with the delay of sowing dates. In con- trast, the NUE was highest under the late sowing, reaching 35.95%-41.32%. It indi- cated that under the condition of late sowing, most of the nitrogen was not ab- sorbed by wheat, but the use efficiency of the absorbed nitrogen significantly in- creased. In overall, the three high-yield wheat cultivars were all suitable for early and optimum sowing. Under the condition of late sowing, the yield of Zhoumai 22 showed the smallest differences with those under early and optimum sowing, and its NUE was significantly improved. Therefore, among the three high-yield wheat culti- vars, Zhoumai 22 was most suitable for late sowing.

Study on Regionalization of High Efficiency Eco-agriculture in Eco-economic Zone of Poyang Lake

The high efficient eco-agricultural zone in Eco-economic Region of Poyang Lake was divided into three different areas. 12 indicators including per capita cultivated land,forest coverage,comprehensive utilization rate of straw,the ratio of the effective irrigation area to the arable land,amount of pesticide usage per unit area of arable land,the output value ratio of planting industry,the output value ratio of forestry and fruit industry,the output value ratio of stock farming,the output value ratio of fishery,the proportion of sown area of crop,proportion of sown area of oil plants and the proportion of sown area of vegetable were screened to construct the indicator system of regionalization of high efficient eco-agriculture. The average index values of the high efficient eco-agricultural regionalization of three regions were obtained,the development direction of the efficient eco-agriculture construction of three areas were analyzed according to the natural resources characteristics f eco-agricultural and requirements of high efficient eco-agricultural development of the regions.

Identification and Selection of Wheat Genotypes with High Phosphorus Use Efficiency at Adult Stage in Huang-huai Wheat Area

[Objective] This study was conducted to select wheat varieties with high P use efficiency. [Method] A field experiment was carried out with 112 wheat germplasm varieties as experiment materials under normal （NP） and low phosphorus （LP） conditions, and with Jimai 22 as control, genotypes with high P use efficiency and excellent yield traits were selected. [Result] Compared with NP treatment, 8 wheat yield-related traits, spike number per plant, thousand-grain weight plant height, spike length, fertile spikelet number per spike, grain number per spike, grain weight per plant and above-land weight per plant, and 3 P content traits, grain, straw and above-land P contents per plant decreased significantly under LP condition （P〈〈 0.05）, while 3 P utilization efficiency traits, grain, straw and aboveground P utilization efficiencies increased obviously, indicating that low P stress would greatly reduce yield and P content of wheat at adult stage, but would remarkably improve P utilization efficiency. Correlation analysis showed that plant height, fertile spikelet number per spike and grain weight per plant and straw and above-land P concentrations were in significant positive correlation with 3 P content traits, grain, straw and above-land P contents per plant, and in significant negative correlation with 2 Putilization efficiency traits, straw and above-land P utilization efficiencies （P〈0.01）, and could serve as indexes for preliminary rapid evaluation of P use efficiency. Under NP treatment, 17 genotypes with high P use efficiency were selected, and among them, Hanxuan H28, 2010 Pin 4891 and Zhoumai 28 showed grain weights per plant higher than Jimai 22 by 36.07%, 31.96% and 37.44%, respectively, and above-land P utilization efficiency higher than Jimai 22 by 49.34%, 49.42% and 33.05%, respectively; and under LP treatment, 10 genotypes with high P use efficiency were selected, and among them, Henong 826 showed grain weight per plant and above-land P utilization efficiency higher than Jimai 22 by 37.60% and 20.42%, respectively. Furthermore, Hanxuan H23, Hanxuan H28 and Xumai 856 were identified as genotypes with high P use efficiency under both NP and LP treatments. [Conclusion] This study provides good parent materials for breeding of varieties with high P use efficiency.

A Novel All-pMOS AC to DC Charge Pump with High Efficiency

A novel AC to DC charge pump with high performance is presented. Due to the pMOS structure and threshold voltage canceling technology, the efficiency and the output voltage are greatly improved. Test results show that the output voltage and power efficiency are improved by 125% and 104% respectively at 13.56MHz for a 1V sinusoidal input compared to the traditional MOS diodes structure.