Multi-layer quasi-zero-stiffness meta-structure for high-efficiency vibration isolation at low frequency

An easily stackable multi-layer quasi-zero-stiffness(ML-QZS)meta-structure is proposed to achieve highly efficient vibration isolation performance at low frequency.First,the distributed shape optimization method is used to design the unit cel,i.e.,the single-layer QZS(SL-QZS)meta-structure.Second,the stiffness feature of the unit cell is investigated and verified through static experiments.Third,the unit cells are stacked one by one along the direction of vibration isolation,and thus the ML-QZS meta-structure is constructed.Fourth,the dynamic modeling of the ML-QZS vibration isolation metastructure is conducted,and the dynamic responses are obtained from the equations of motion,and verified by finite element(FE)simulations.Finally,a prototype of the ML-QZS vibration isolation meta-structure is fabricated by additive manufacturing,and the vibration isolation performance is evaluated experimentally.The results show that the vibration isolation performance substantially enhances when the number of unit cells increases.More importantly,the ML-QZS meta-structure can be easily extended in the direction of vibration isolation when the unit cells are properly stacked.Hence,the ML-FQZS vibration isolation meta-structure should be a fascinating solution for highly efficient vibration isolation performance at low frequency.

A hierarchical salt-rejection strategy for sustainable and high-efficiency solar-driven desalination

Solar steam generation(SSG)is widely regarded as one of the most sustainable technologies for seawater desalination.However,salt fouling severely compromises the evaporation performance and lifetime of evaporators,limiting their practical applications.Herein,we propose a hierarchical salt-rejection(HSR)strategy to prevent salt precipitation during long-term evaporation while maintaining a rapid evaporation rate,even in high-salinity brine.The salt diffusion process is segmented into three steps—insulation,branching diffusion,and arterial transport—that significantly enhance the salt-resistance properties of the evaporator.Moreover,the HSR strategy overcomes the tradeoff between salt resistance and evaporation rate.Consequently,a high evaporation rate of 2.84 kg m^(-2) h^(-1),stable evaporation for 7 days cyclic tests in 20 wt%NaCl solution,and continuous operation for 170 h in natural seawater under 1 sun illumination were achieved.Compared with control evaporators,the HSR evaporator exhibited a>54%enhancement in total water evaporation mass during 24 h continuous evaporation in 20 wt%salt water.Furthermore,a water collection device equipped with the HSR evaporator realized a high water purification rate(1.1 kg m^(-2) h^(-1)),highlighting its potential for agricultural applications.

Effect of high-multiple water injection on rock pore structure and oil displacement efficiency

Experimental methods,including mercury pressure,nuclear magnetic resonance(NMR)and core(wateroil)displacement,are used to examine the effects of high-multiple water injection(i.e.water injection with high injected pore volume)on rock properties,pore structure and oil displacement efficiency of an oilfield in the western South China Sea.The results show an increase in the permeability of rocks along with particle migration,an increase in the pore volume and the average pore throat radius,and enhanced heterogeneity after high-multiple water injection.Compared with normal water injection methods,a high-multiple water injection is more effective in improving the oil displacement efficiency.The degree of recovery increases faster in the early stage due to the expansion of the swept area,and the transition from oil-wet to water-wet.The degree of recovery increases less in the late stage due to various factors,including the enhancement of heterogeneity in the rocks.Considering both the economic aspect and the production limit of water flooding,it is recommended to adopt other technologies to further enhance oil recovery after 300 PV water injection.

基于FACAM-Efficient Net的通信信号调制方式识别

针对在复杂电磁空间中,通信信号识别方法存在噪声干扰、识别率不足、网络模型复杂等问题,提出基于高阶累积量可视化时频图像的FACAM-Efficient Net信号调制方式识别方法,通过高阶累积量时频分析方法,将不同调制的通信信号转换成可视化时频图像,用作网络模型的训练和测试,根据可视化时频图像的图像特征,提出FACAM频域通道混合注意力机制,并引入FACAM改进Efficient Net的网络主体结构,更好地提取时频图像的频域和通道的特征。实验结果显示,本文提出的调制识别方法在低信噪比下有较好的识别效果。

Low organic matter abundance and highly efficient hydrocarbon generation of saline source rock in the Qaidam Basin,NW China

The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.

High efficient mixed culture screening and selected microbial community shift for bioleaching process

To screen the high efficient mixed culture and understand the bioleaching behaviors of mixed culture for low-grade copper sulfide ore bioleaching,ten mixed cultures were collected and screened from different acid mine drainages obtained from sulfide mines of China.The leaching rate was set as criterion to screen the mixed culture and the metagenomic approach.Community genome array（CGA） was used for analyzing the mixed culture microbial community shift during the bioleaching process.The results indicate that the mixed culture obtained from Yinshan（YS） lead-zinc mine in Dexing of Jiangxi province in China reaches the maximum copper extraction（68.89%） during the one bioleaching period of 24 d.CGA results show that YS culture contains nine kinds of bacteria which are belong to six divisions,and the microbial community structure is changing during the bioleaching process.This provides a good way to accelerate the bioleaching process and reveals the microbial community shift during the bioleaching process.

Thermally Evaporated ZnSe for Efficient and Stable Regular/Inverted Perovskite Solar Cells by Enhanced Electron Extraction

Electron transport layers(ETLs)are crucial for achieving efficient and stable planar perovskite solar cells(PSCs).Reports on versatile inorganic ETLs using a simple film fabrication method and applicability for both low-cost planar regular and inverted PSCs with excellent efficiencies(>22%)and high stability are very limited.Herein,we employ a novel inorganic ZnSe as ETL for both regular and inverted PSCs to improve the efficiency and stability using a simple thermal evaporation method.The TiO_(2)-ZnSe-FAPbl_(3)heterojunction could be formed,resulting in an improved charge collection and a decreased carrier recombination further proved through theoretical calculations.The optimized regular PSCs based on TiO_(2)/ZnSe have achieved 23.25%efficiency with negligible hysteresis.In addition,the ZnSe ETL can also effectively replace the unstable bathocuproine(BCP)in inverted PSCs.Consequently,the ZnSe-based inverted device realizes a champion efficiency of 22.54%.Moreover,the regular device comprising the TiO_(2)/ZnSe layers retains 92%of its initial PCE after 10:00 h under 1 Sun continuous illumination and the inverted device comprising the C_(60)/ZnSe layers maintains over 85%of its initial PCE at 85℃for 10:00 h.This highlights one of the best results among universal ETLs in both regular and inverted perovskite photovoltaics.

Establishment of a Highly Efficient Regeneration System for the Mature Embryo Culture of Wheat

Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign genes into wheat. By using the mature embryos derived from 20 different wheat lines including Shi 4185, Yumai 66, Lunxuan 987, CB037, Yangmai 6, Xinchun 9, Bobwhite, Han 6172, Zheng 9023, Jimai 20, Ningchun 4, and Jing 411, the effects of some factors including inoculation methods, initiating culture media, organic additives, antioxidants, and auxins on the regeneration from the explants were evaluated. The results indicated that the scraping embryo culture was better than the whole embryo culture, the Aa medium was better than the SD2 medium and dicamba was better than 2,4-D in increasing the regeneration frequency. An Adi medium was established in this study by adding silver nitrate, cysteine, ascorbic acid, dicamba, glutamine into the Aa medium at the concentration of 4,40, 100, 2, and 5 mg L^-1, respectively. By using the Adi medium and the scraping technique, the regeneration frequencies of the mature embryos of CB037, Lunxuan 987, Hart 6172, Yangmai 6, Bobwhite, Zheng 9023, Shi 4 185, and Jimai 20 became 85.6, 60,1, 46.0, 42.1,42.0, 34.0, 33.0, and 32.0%, respectively, which were about 5-8 times higher than that obtained from the conventional culture mediums and techniques. This novel regeneration system could be helpful in wheat transformation.

High Efficient Methods of Content-based 3D Model Retrieval

Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low time efficiency. This paper presents two new methods with high efficiency to build a Content-based 3D model retrieval system. First, an improvement is made on the ＂Shape Distribution （D2）＂ algorithm, and a new algorithm named ＂Quick D2＂ is proposed. Four sample 3D mechanical models are used in an experiment to compare the time cost of the two algorithms. The result indicates that the time cost of Quick D2 is much lower than that of D2, while the descriptors extracted by the two algorithms are almost the same. Second, an expandable 3D model repository index method with high performance, namely, RBK index, is presented. On the basis of RBK index, the search space is pruned effectively during the search process, leading to a speed up of the whole system. The factors that influence the values of the key parameters of RBK index are discussed and an experimental method to find the optimal values of the key parameters is given. Finally, ＂3D Searcher＂, a content-based 3D model retrieval system is developed. By using the methods proposed, the time cost for the system to respond one query online is reduced by 75% on average. The system has been implemented in a manufacturing enterprise, and practical query examples during a case of the automobile rear axle design are also shown. The research method presented shows a new research perspective and can effectively improve the content-based 3D model retrieval efficiency.

Enabling high-efficiency ethanol oxidation on NiFe-LDH via deprotonation promotion and absorption inhibition

Nucleophile oxidation reaction(NOR), represented by ethanol oxidation reaction(EOR), is a promising pathway to replace oxygen evolution reaction(OER). EOR can effectively reduce the driving voltage of hydrogen production in direct water splitting. In this work, large current and high efficiency of EOR on a Ni, Fe layered double hydroxide(NiFe-LDH) catalyst were simultaneously achieved by a facile fluorination strategy. F in NiFe-LDH can reduce the activation energy of the dehydrogenation reaction, thus promoting the deprotonation process of NiFe-LDH to achieve a lower EOR onset potential. It also weakens the absorption of OH-and nucleophile electrooxidation products on the surface of NiFe-LDH at a higher potential, achieving a high current density and EOR selectivity, according to density functional theory calculations. Based on our experiment results, the optimized fluorinated NiFe-LDH catalyst achieves a low potential of 1.386 V to deliver a 10 mA cm^(-2)EOR. Moreover, the Faraday efficiency is greater than 95%, with a current density ranging from 10 to 250 mA cm^(-2). This work provides a promising pathway for an efficient and cost-effective NOR catalyst design for economic hydrogen production.

Analyzing and Exploring a Model for High-Efficiency Perovskite Solar Cells

Perovskite materials have drawn a lot of interest recently due to their potential to increase solar cell efficiency. This study uses the solar cell capacitance simulator (SCAPS-1D) to develop and simulate a perovskite solar cell made of semiconductor materials. The design that has been suggested is Al:ZnO/ZnO/CdS/CsSnCl3 and MoS2. The analysis focuses on how different characteristics of the material affect the device’s performance. The analysis of the data reveals that the architecture had 26.15% power conversion efficiency (PCE). The solar cell creates an interest in developing a non-toxic solar cell with low manufacturing costs, outstanding conversion efficiency, and stability.

Brominated PEAI as Multi-Functional Passivator for High-Efficiency Perovskite Solar Cell

The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion efficiency(PCE)of PSCs.Defect chemistry and surface passivators have been researched extensively and mainly focused on the neutralization of uncoordinated lead or anion defects.Herein,a novel brominated passivator 2-bromophenethylammonium iodide(2-Br-PEAI)is introduced for a multi-functional passivation effect at the perovskite interface.The brominated species readily form 2D perovskite on top of the 3D perovskite and multi-interact with the 3D perovskite surface.Apart from the halide vacancy filling and anion bonding ability,the Br atoms on the benzene ring can interact with the FA cations via strong hydrogen bonding N-H…Br and interact with the[PbI_(6)]^(4−)inorganic framework.The interface defects in the PSCs are well passivated,minimizing non-radiative recombination and enhancing device performance.As a result,a champion PCE of 24.22%was achieved with high V_(oc)and fill factor.In addition,modified devices also showed enhanced operational stability(retention of>95%initial PCE after 400 h)and humidity resistance(>90%initial PCE maintained after 1500 h under~50%RH).

Breeding of National Authorized New Wheat Variety Shannong 116 and Supporting Cultivation Technical Measures for High Yield, High Quality and High Efficiency

Shannong 116 is a strong gluten,high yield and multi-resistance wheat variety bred by Shandong Agricultural University,which was approved by the State in 2021 and by Shandong Province in 2022.Shannong 116 combines the excellent characteristics of the female parent(strong gluten,disease resistance and early maturity)and the male parent(high yield,water saving and lodging resistance),with a plant height of 76.9 cm,compact plant type,orderly spike layer and good maturity performance,which is suitable for large-scale promotion and market order planting in Huanghuai wheat area.In this paper,the characteristics of Shannong 116 are analyzed,and cultivation technical measures for high yield,high quality and high efficiency are put forward,in order to provide a technical support for the popularization and application of the variety.

Two highly efficient accumulation models of large gas fields in China

Based on reserve abundance,large gas fields in China can be divided into two types：type one of high abundance large gas fields,dominated by structural gas reservoirs; type two of low abundance large gas fields,dominated by stratigraphic and lithologic gas reservoirs.The formation of these two types of large gas fields is related to the highly efficient accumulation of natural gas.The accumulation of high abundance gas fields is dependent on the rapid maturation of the source kitchen and huge residual pressure difference between the gas source kitchen and reservoir,which is the strong driving force for natural gas migration to traps.Whereas the accumulation of low abundance gas fields is more complicated,involving both volume flow charge during the burial stage and diffusion flow charge during the uplift stage,which results in large area accumulation and preservation of natural gas in low porosity and low permeability reservoirs.This conclusion should assist gas exploration in different geological settings.

An Overview of High-efficiency Synchronous Reluctance Machines

In recent years the synchronous reluctance machines(SynRMs)have received much attention.They have some good features such as high torque density,high reliability and low cost.This paper aims to give an overview of SynRMs with particular emphasis on the history,research status and industrial application.Besides,concept and basic operating principles of such machines are also described.Moreover,some hot spots of the research on the SynRMs are introduced.Several methods to improve the average torque and reduce torque ripple of the SynRMs in the past literatures are presented including topology design and control strategies.An overview of the methods from different aspects to realize high efficiency for the SynRMs is given which contain rotor optimization,winding configuration,material improvement,control schemes and so on.Some approaches suitable for high speed application are also introduced.It can be seen that the SynRMs have broad development prospects and great potential in industrial application.

Composite electron transport layer for efficient N-I-P type monolithic perovskite/silicon tandem solar cells with high open-circuit voltage

Perovskite/silicon tandem solar cells(PSTSCs) have exhibited huge technological potential for breaking the Shockley-Queisser limit of single-junction solar cells. The efficiency of P-I-N type PSTSCs has surpassed the single-junction limit, while the performance of N-I-P type PSTSCs is far below the theoretical value. Here, we developed a composite electron transport layer for N-I-P type monolithic PSTSCs with enhanced open-circuit voltage(VOC) and power conversion efficiency(PCE). Lithium chloride(Li Cl) was added into the tin oxide(SnO_(2)) precursor solution, which simultaneously passivated the defects and increased the electron injection driving force at the electron transfer layer(ETL)/perovskite interface.Eventually, we achieved monolithic PSTSCs with an efficiency of 25.42% and V_(OC) of 1.92 V, which is the highest PCE and VOCin N-I-P type perovskite/Si tandem devices. This work on interface engineering for improving the PCE of monolithic PSTSCs may bring a new hot point about perovskite-based tandem devices.

Highly Efficient Greenish-Yellow Phosphorescent Organic Light-Emitting Diodes Based on a Novel 2,3-Diphenylimidazo[1,2-a]Pyridine Iridium(Ⅲ) Complex

A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.

High efficient Sr/S isolation for preparing Sr(OH)_2 from celestite(SrSO_4) in alkaline solution

The bottleneck of strontium compounds preparing from celestite is the promotion of Sr/S isolation efficiency.Low energy consumption and zero release method for isolating Sr/S in preparing Sr(OH)2 process from celestite in mild condition was described.Sr element remained in precipitation with formation of Sr(OH)2,while S element entered into leachate with formation of Na2SO4.The effects of initial concentration of NaOH,conversion temperature,liquid-to-solid(L/S)ratio and conversion time on Sr/S ratio of samples for celestite conversion were systematically investigated by experiments.The results demonstrated that the efficiency of Sr/S isolation increased with the initial concentration of NaOH,L/S ratio and conversion time,and decreased with conversion temperature.The maximum conversion ratio of Sr(OH)2 was 93.88%under the optimum condition,whose Sr/S ratio of sample could reach to 41.16.It illustrated that better isolation efficiency of celestite could be achieved in alkaline treatment.The results of SEM-EDS analyses demonstrated that the conversion reaction was a dissolution-precipitation process.

Highly efficient CRISPR-SaKKH tools for plant multiplex cytosine base editing

Base editing, as an expanded clustered regularly interspaced short palindromic repeats(CRISPR)-Cas genome editing strategy, permits precise and irreversible nucleotide conversion. SaKKH, an efficient variant of a Cas9 ortholog from Staphylococcus aureus(SaCas9), is important in genome editing because it can edit sites with HHHAAT protospacer adjacent motif(PAM) that the canonical Streptococcus pyogenes Cas9(SpCas9) or its variants(e.g. xCas9, Cas9-NG) cannot. However, several technical parameters of SaKKH involved base editors have not been well defined and this uncertainty limits their application. We developed an effective multiplex cytosine base editor(SaKKHn-pBE) and showed that it recognized NNARRT, NNCRRT, NNGRGT, and NNTRGT PAMs. Based on 27 targets tested, we defined technical parameters of SaKKHn-pBE including the editing window, the preferred sequence context, and the mutation type. The editing efficiency was further improved by modification of the SaKKH sgRNA. These advances can be applied in future research and molecular breeding in rice and other plants.

A fast approach to optimize dye loading of photoanode via ultrasonic technique for highly efficient dye-sensitized solar cells

A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at random and single molecular state in the ultrasonic field and the ultrasonic wave favors the diffusion and adsorption processes of dye molecules. As a result, the introduction of ultrasonic technique at room temperature leads to faster and more well-distributed dye adsorption on TiO2 as well as higher cell efficiency than regular deposition, thus the fabrication time is markedly reduced. It is found that the device based on 40 kHz ultrasonic （within 1 h） with N719 exhibits a Voc of 789 mV, Jsc of 14.94 mA]cm2 and fill factor （FF） of 69.3, yielding power conversion efficiency （PCE） of 8.16%, which is higher than device regularly dyed for 12 h （PCE = 8.06%）. In addition, the DSSC devices obtain the best efficiency （PCE = 8.68%） when the ultrasonic deposition time increases to 2.5 h. The DSSCs fabricated via ultrasonic technique presents more dye loading, larger photocurrent, less charge recombination and higher photovoltage. The charge extraction and electron impedance spectroscopy （EIS） were performed to understand the influence of ultrasonic technique on the electron recombination and performance of DSSCs.