Phase Evolution Study and Optimization of the Heat Treatment Process for High Current Capacity Bi-2223 Tapes

Powder in tube process（PIT） was adopted for the fabrication of single filament Bi-2223 tapes, and a heat treatment process including the first heat treatment（HT1）, intermediate rolling（IR）, and second heat treatment（HT2） was performed. The phase evolution mechanism and microstructure changes during these heat treatment processes were systematically discussed. The influences of HT1 parameters on the phase evolution process of Bi-2223 tapes were discussed. With the optimized HT1 process, a proper Bi-2223 content of about 90% was achieved. HT2 process was also optimized by adding a post annealing process. An obvious increase of current capacity was obtained due to the enhancement of intergrain connections. Single filament Bi-2223 tapes with the critical current of Ic-90 A were fabricated with the optimized sintering process.

The Metamorphic Evolution and Tectonic Significance of the Sumdo High and Ultrahigh Pressure Metamorphic Terrane, Central-South Lhasa Block, Tibet

Asthemaintectoniccomponentofthe Himalayan–Tibetan orogen,the Lhasa terrane has received much attention as it records the entire history of the orogeny.The occurrence of high pressure eclogite in the Sumdo complex in central Lhasa terrane has a significant importance on the understanding of the Paleo-Tethys subduction and plate itineration processes in this area.The petrological,geochemical and geochronological data of eclogite and associated blueschist and garnet-bearing mica schist from Sumdo,Jilang and Bailang area have been briefly reviewed to explore the origin and metamorphic evolution of this suture.Eclogites from the Sumdo complex have experienced low temperature,high pressure to ultrahigh pressure metamorphism,revealing a fastsubduction and exhumation process in a typical oceanic subduction zone.The large P-T range between different eclogites in the literature may be affected by the big error of unappropriated using geothermobarometry and may also because of slices of subducted blocks derived from different depths juxtapose together during exhumation.By summarizing the U-Pb,Lu-Hf and Sm-Nd ages of eclogites,the eclogite facies metamorphism is likely to occur in early Triassic during 245-225 Ma,but not the previously accepted late Permian at ca.260 Ma by the reinterpretation of the former geochronological data from literature.The opening of Paleo-Tethys Ocean between the Lhasa terrane initiate prior to ca.280 Ma and ultimate closure to integrate the Lhasa terrane was no earlier than225 Ma and may triggered by the initial subduction of Bangong-Nujiang Tethys Ocean in the north.

Physical and mechanical properties of sandstone containing a single fissure after exposure to high temperatures

In order to investigate the physical and mechanical properties of sandstone containing fissures after exposure to high temperatures,fissures with different angles α were prefabricated in the plate sandstone samples,and the processed samples were then heated at 5 different temperatures.Indoor uniaxial compression was conducted to analyze the change rules of physical properties of sandstone after exposure to high temperature,and the deformation,strength and failure characteristics of sandstone containing fissures.The results show that,with increasing temperature,the volume of sandstone increases gradually while the quality and density decrease gradually,and the color of sandstone remains basically unchanged while the brightness increases markedly when the temperature is higher than 585 ℃;the peak strength of sandstone containing fissures first decreases then increases when the temperature is between 25℃and 400℃.The peak strain of sandstone containing fissures increases gradually while the average modulus decreases gradually with increasing temperature,and the mechanical properties of sandstone show obvious deterioration after 400 ℃.The peak strain of sandstone containing fissures increases gradually while the average modulus decreases gradually with increasing temperature;with increasing angle αof the fissure,the evolution characteristics of the macro-mechanical parameters of sandstone are closely related to the their own mechanical properties.When the temperature is 800 ℃,the correlation between the peak strength and average modulus of sandstone and the angle α of the fissure is obviously weakened.The failure modes of sandstone containing fissures after high temperature exposure are of three different kinds including:tensile crack failure,tensile and shear cracks mixed failure,and shear crack failure.Tensile and shear crack mixed failure occur mainly at low temperatures and small angles;tensile crack failure occurs at high temperatures and large angles.

Template-assisted synthesis of hierarchically porous Co3O4 with enhanced oxygen evolution activity

Oxygen evolution reaction（OER） is one of the most important reactions in the energy storage devices such as metal–air batteries and unitized regenerative fuel cells（URFCs）. However, the kinetically sluggishness of OER and the high prices as well as the scarcity of the most active precious metal electrocatalysts are the major bottleneck in these devices. Developing low-cost non-precious metal catalysts with high activity and stability for OER is highly desirable. A facile, in situ template method combining the dodecyl benzene sulfuric acid sodium（SDBS） assisted hydrothermal process with subsequent high-temperature treatment was developed to prepare porous Co3O4 with improved surface area and hierarchical porous structure as precious catalysts alternative for oxygen evolution reaction（OER）. Due to the unique structure, the as-prepared catalyst shows higher electrocatalytic activity than Co3O4 prepared by traditional thermal-decomposition method（noted as Co3O4-T） and commercial IrO2 catalyst for OER in 0.1M KOH aqueous solution. Moreover, it displays improved stability than Co3O4-T. The results demonstrate a highly efficient, scalable, and low cost method for developing highly active and stable OER electrocatalysts in alkaline solutions.

Evolution of Al2O3 inclusions by cerium treatment in low carbon high manganese steel

The influence of cerium（Ce）treatment on the morphologies,size and distributions of Al_2O_3 inclusions in low carbon high manganese steel was investigated by OM,SEM-EDS and theoretical calculation.The results showed that Ce can modify the morphologies and types of Al_2O_3 inclusions.After Ce treatment,the irregular Al_2O_3 inclusions were replaced by smaller and dispersive spherical cerium oxysulfides.The effects of treatment time and Ce content on the evolution of Al_2O_3 inclusions were examined.It indicated that Al_2O_3 inclusions were wrapped by rare earth inclusions to form a ring like shape Ce-enriched band around the inclusions.Model was established to elucidate the evolution mechanism of Al_2O_3 inclusions.Evolution kinetics of inclusions was discussed qualitatively to analyze the velocity controlled step.It was found that diffusion of Ce^（3＋）and Al^（3＋）in solid inclusion core and the formed intermediate layer would be the limited step during the evolution process.

Alloying cobalt with ruthenium in nitrogen doped graphene layers for developing highly active hydrogen evolution electrocatalysts in alkaline media

Subject Code:B01With the support by the National Natural Science Foundation of China,a creative study by the research group led by Prof.Chen Qianwang(陈乾旺)from the University of Science and Technology of China and High Magnetic Field Laboratory,Hefei Institutes of Physical Science,Chinese Academy of

Self-supporting hierarchically micro/nano-porous Ni_(3)P-Co_(2)P-based film with high hydrophilicity for efficient hydrogen production

Designing efficient and stable non-precious metal HER(hydrogen evolution reaction)electrocatalysts with high large current density adaptability is significant for industrial application of hydrogen production by water electrolysis.Herein,a facile strategy was developed to construct a multi-phase Ni3 P-Co_(2)P-(Ni-Co)film with self-supporting hierarchically micro/nano-porous structure by using bubble template method electrodeposition of self-supporting micro-porous Ni Co P film,oxygen-free annealing for phase separation producing Ni_(3)P-Ni-Co_(2)P-Co structure,and acid etching for constructing surface nano-porous structure.The effective active sites for HER was significantly increased due to the hierarchically micro/nano-porous structure,which not only enlarged the surface roughness,but enhanced the bubble detachment by improving the hydrophilicity.Meanwhile,the HER electrolysis durability was improved benefiting from the Ni_(3)P-Co_(2)P phases with high corrosion resistance(especially in acid solution)and the self-supporting film structure without binder.Consequently,the Ni Co P-OA-AE film exhibited high HER catalytic performance,which delivered a current density of 10 m A cm^(-2)at a low overpotential of 42.9 and 39.7 m V in 1 M KOH and 0.5 M H_(2)SO_(4),respectively.It also possessed high long-term electrolysis durability,and the cell voltage of water electrolysis using self-supporting porous Ni Co P-OA-AE||Ir O_(2)-Ta_(2)O_(5) electrolyzer at 500 m A cm^(-2)for 250 h in 0.5 M H_(2)SO_(4 )is only 2.9 V.