Cracking morphology in the fusion zone of HQ130 high strength steel was researched by 'the y-slit test' and 'three-point bend test', ultrasonic test and microscope. HQ130 and QJ63 high strength steel w...Cracking morphology in the fusion zone of HQ130 high strength steel was researched by 'the y-slit test' and 'three-point bend test', ultrasonic test and microscope. HQ130 and QJ63 high strength steel was welded by Ar+CO2 gas shielded arc welding under the condition without preheating. Experimental results indicated that welding cracks were produced in the partially melted zone of the weld root of HQ130 steel side and propagated parallel to the fusion zone. The cracks were developed alternatively between the weld and the partially melted zone, and are not strictly ruptured at W/F (weld metal/fusion zone) boundary surface. Controlling weld heat input (E) about 16 kJ/cm could make the cracking rate lowest and satisfy the performance requirement of welded joint zone.展开更多
Surgical treatment for cervical kyphotic deformity is still controversial. Circumferential approach has been well described in the literature but long terms outcomes are not well reported. Important to decide the corr...Surgical treatment for cervical kyphotic deformity is still controversial. Circumferential approach has been well described in the literature but long terms outcomes are not well reported. Important to decide the correct treatment option is the preoperative radiological exams to value the type of deformity(flexible or fixed). We report the case of a 67-year-old woman affected by a severe cervical kyphotic deformity who underwent combined anterior/posterior surgical approach, getting a good reduction of the deformity and an optimal stability in a long term follow up.展开更多
Due to the existing limited dynamic range a camera cannot reveal all the details in a high-dynamic range scene. In order to solve this problem,this paper presents a multi-exposure fusion method for getting high qualit...Due to the existing limited dynamic range a camera cannot reveal all the details in a high-dynamic range scene. In order to solve this problem,this paper presents a multi-exposure fusion method for getting high quality images in high dynamic range scene. First,a set of multi-exposure images is obtained by multiple exposures in a same scene and their brightness condition is analyzed. Then,multi-exposure images under the same scene are decomposed using dual-tree complex wavelet transform( DT-CWT),and their low and high frequency components are obtained. Weight maps according to the brightness condition are assigned to the low components for fusion. Maximizing the region Sum Modified-Laplacian( SML) is adopted for high-frequency components fusing. Finally,the fused image is acquired by subjecting the low and high frequency coefficients to inverse DT-CWT.Experimental results show that the proposed approach generates high quality results with uniform distributed brightness and rich details. The proposed method is efficient and robust in varies scenes.展开更多
With the developpment of image fusion technology and the maturity of wavelet theory, wavelet transform with its good time-frequency characteristics stands out in the field of image fusion. On the basis of wavelet tran...With the developpment of image fusion technology and the maturity of wavelet theory, wavelet transform with its good time-frequency characteristics stands out in the field of image fusion. On the basis of wavelet transforms theory, this article proposes a high dynamic range imaging confusion method which combines with wavelet decomposition. First, perform a wavelet multi-scale decomposition to the two registered source image; then conduct wavelet inverse transform to the decomposed images. This paper focuses on the characteristics of high frequency and low frequency domain after wavelet decomposition,using different fusion methods in each of the frequency domain, finally obtain the fused image through inverse wavelet transform image reconstruction. The simulation results and evaluation index results show that, compared with other similar methods, this method is better in retaining the original image's details information, and improves the quality of fusion image.展开更多
文摘Cracking morphology in the fusion zone of HQ130 high strength steel was researched by 'the y-slit test' and 'three-point bend test', ultrasonic test and microscope. HQ130 and QJ63 high strength steel was welded by Ar+CO2 gas shielded arc welding under the condition without preheating. Experimental results indicated that welding cracks were produced in the partially melted zone of the weld root of HQ130 steel side and propagated parallel to the fusion zone. The cracks were developed alternatively between the weld and the partially melted zone, and are not strictly ruptured at W/F (weld metal/fusion zone) boundary surface. Controlling weld heat input (E) about 16 kJ/cm could make the cracking rate lowest and satisfy the performance requirement of welded joint zone.
文摘Surgical treatment for cervical kyphotic deformity is still controversial. Circumferential approach has been well described in the literature but long terms outcomes are not well reported. Important to decide the correct treatment option is the preoperative radiological exams to value the type of deformity(flexible or fixed). We report the case of a 67-year-old woman affected by a severe cervical kyphotic deformity who underwent combined anterior/posterior surgical approach, getting a good reduction of the deformity and an optimal stability in a long term follow up.
基金Supported by the National Natural Science Foundation of China(No.61308099,61304032)
文摘Due to the existing limited dynamic range a camera cannot reveal all the details in a high-dynamic range scene. In order to solve this problem,this paper presents a multi-exposure fusion method for getting high quality images in high dynamic range scene. First,a set of multi-exposure images is obtained by multiple exposures in a same scene and their brightness condition is analyzed. Then,multi-exposure images under the same scene are decomposed using dual-tree complex wavelet transform( DT-CWT),and their low and high frequency components are obtained. Weight maps according to the brightness condition are assigned to the low components for fusion. Maximizing the region Sum Modified-Laplacian( SML) is adopted for high-frequency components fusing. Finally,the fused image is acquired by subjecting the low and high frequency coefficients to inverse DT-CWT.Experimental results show that the proposed approach generates high quality results with uniform distributed brightness and rich details. The proposed method is efficient and robust in varies scenes.
文摘With the developpment of image fusion technology and the maturity of wavelet theory, wavelet transform with its good time-frequency characteristics stands out in the field of image fusion. On the basis of wavelet transforms theory, this article proposes a high dynamic range imaging confusion method which combines with wavelet decomposition. First, perform a wavelet multi-scale decomposition to the two registered source image; then conduct wavelet inverse transform to the decomposed images. This paper focuses on the characteristics of high frequency and low frequency domain after wavelet decomposition,using different fusion methods in each of the frequency domain, finally obtain the fused image through inverse wavelet transform image reconstruction. The simulation results and evaluation index results show that, compared with other similar methods, this method is better in retaining the original image's details information, and improves the quality of fusion image.
