State-selective charge exchange cross sections in collisions of highly-charged sulfur ions with helium and molecular hydrogen

The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.

Archean Basement and a Paleoproterozoic Collision Orogen in the Huoqiu Area at the Southeastern Margin of North China Craton: Evidence from Sensitive High Resolution Ion Micro-Probe U-Pb Zircon Geochronology

This paper reports sensitive high resolution ion micro-probe U-Pb zircon ages for the ＂Huoqiu Group＂ and granitoids of the Early Precambrian basement in the Huoqiu area, southeastern margin of the North China Craton. The ＂Huoqiu Group＂ is similar in rock association and metamorphism to the khondalite series, apart from it containing considerable amounts of banded iron formation. All detrital zircons from the ＂Huoqiu Group＂ meta-sedimentary rocks are 3.0 Ga and 2.75 Ga, without any 2.5 Ga and younger ones, as is commonly found in Paleoproterozoic khondalite series in other areas of the North China Craton. In the Huoqiu area, 2.75 Ga and 2.56 Ga granitoids have also been identified. This basement assemblage underwent strong metamorphism during the late Paleoproterozoic （-1.84 Ga） tectonothermal event that is widely developed in the North China Craton. Thus the formation time of the ＂Huoqiu Group＂ can be constrained between 2.75 and 1.84 Ga in terms of detrital and metamorphic zircon ages. It is considered, combined with regional data, that there may be a Paleoproterozoic collision orogen extending in a NWW-SEE direction to the southern margin of the North China Craton.

Permian High Ba-Sr Granitoids:Geochemistry,Age and Tectonic Implications of Erlangshan Pluton,Urad Zhongqi,Inner Mongolia

Erlangshan Pluton from Urad Zhongqi, central Inner Mongolia, is located in the middle segment of the northern margin of the North China Plate. The rocks consist mainly of diorites with gneissic structure. Petrochemical characteristics reveal that the diorites belong to metaluminous, high- potassium calc-alkaline series, with chemical signatures of I-type granites. They are characterized by low SiOz contents (56.63%-58.53%) and A/CNK (0.90-0.96), high Al2O3 contents (17.30%-17.96%) and Na20/K20 ratios (1.20-1.70), enrichment in large ion lithophile elements (LILE, e.g., Ba=556-915 ppm, Sr=463-595 ppm), and relative depletion in high field strength elements (HFSE, e.g., Nb, Ta, Ti) in primitive mantle-normalized spidergram, and right-declined rare earth element patterns with slightly negative Eu anomalies (8Eu=0.72-0.90). They have Sr/Y ratios (20-25) evidently less than Kebu Pluton (49-75) to its east. Sensitive high resolution ion micro-probe U-Pb zircon dating of the diorites has yielded an intrusive age of 270±8 Ma. This leads us to conclude that Erlangshan diorites were formed by mixing between the middle or lower crustal-derived magma and minor mantle-derived mafic magma, followed by fractional crystallization, which was trigged by crustal extension and fault activity in post-collisional setting.

Peak Profile Analysis in High Field Asymmetric Wave Ion Mobility Spectrometry

High field asymmetric wave ion mobility spectrometry （FAIMS） is a powerful tool to detect and characterize gas-phase ions, while the unsolvable partial differential equation of ions moving in ion drift tube poses a big challenge to FAIMS spectral peak analysis. In this work, a universal and effective model of FAIMS spectral peak profile has been proposed by introducing ion trajectory and loss height. With this model, the influence of the structure of ion drift tube, dispersion voltages, compensation voltages, and carrier gas flow rate on the FAIMS spectral peak characteristics like peak shape, full width at half maximum and peak height is analyzed and discussed. The results show that the influence of different factors on the FAIMS spectral peak profile can be qualitatively described by the model which agrees with the experimental data.

Formation of Nanoscale Intermetallic Phases in Ni Surface Layer at High Intensity Implantation of Al Ions

The results of experimental study of nanoscale intermetallic formation in surface layer of a metal target at ion implantation are presented. To increase the thickness of the ion implanted surface layer the high intensive ion implantation is used. Compared with the ordinary ion implantation, the high intensive ion implantation allows a much thicker modified surface layer. Pure polycrystalline nickel was chosen as a target. Nickel samples were irradiated with Al ions on the vacuum-arc ion beam and plasma flow source 'Raduga-5'. It was shown that at the high intensity ion implantation the fine dispersed particles of Ni3AI, NiAl intermetallic compounds and solid solution Al in Ni are formed in the nickel surface layer of 200 nm and thicker. The formation of phases takes place in complete correspondence with the Ni-AI phase diagram.

Atomic structure and collision dynamics with highly charged ions

The research progresses on the investigations of atomic structure and collision dynamics with highly charged ions based on the heavy ion storage rings and electron ion beam traps in recent 20 years are reviewed.The structure part covers test of quantum electrodynamics and electron correlation in strong Coulomb field studied through dielectronic recombi-nation spectroscopy and VUV/x-ray spectroscopy.The collision dynamics part includes charge exchange dynamics in ion-atom collisions mainly in Bohr velocity region,ion-induced fragmentation mechanisms of molecules,hydrogen-bound and van de Waals bound clusters,interference,and phase information observed in ion-atom/molecule collisions.With this achievements,two aspects of theoretical studies related to low energy and relativistic energy collisions are presented.The applications of data relevant to key atomic processes like dielectronic recombination and charge exchanges involving highly charged ions are discussed.At the end of this review,some future prospects of research related to highly charged ions are proposed.

Controllable synthesis of high loading LiFePO_4/C nanocomposites using bimodal mesoporous carbon as support for high power Li-ion battery cathodes

Mesoporous LiFePO4/C composites containing 80 wt% of highly dispersed LiFePO4 nanoparticles(4-6 nm) were fabricated using bimodal mesoporous carbon(BMC) as continuous conductive networks. The unique pore structure of BMC not only promises good particle connectivity for LiFePO4, but also acts as a rigid nano-confinement support that controls the particle size. Furthermore, the capacities were investigated respectively based on the weight of LiFePO4 and the whole composite. When calculated based on the weight of the whole composite, it is 120 mAh·g-1at 0.1 C of the high loading electrode and 42 mAh·g-1at 10 C of the low loading electrode. The electrochemical performance shows that high LiFePO4 loading benefits large tap density and contributes to the energy storage at low rates, while the electrode with low content of LiFePO4 displays superior high rate performance, which can mainly be due to the small particle size, good dispersion and high utilization of the active material, thus leading to a fast ion and electron diffusion.

The Development of a Megawatt-Level High Current Ion Source

Neutral beam injection is one of the main plasma heating methods in nuclear fusion devices. In order to support the scientific study of the Experimental Advanced Superconducting Tokamak （EAST）, a megawatt-level high current ion source is designed and manufactured in the ASIPP, and the progress and preliminary test results will be presented in this paper.

Graphene as a High-capacity Anode Material for Lithium Ion Batteries

Graphene was produced via a soft chemistry synthetic route for lithium ion battery applications. The sample was characterized by X-ray diffraction, nitrogen adsorption-desorption, field emission scanning electron microscopy and transmission electron microscopy, respectively. The electrochemical performances of graphene as anode material were measured by cyclic voltammetry and galvanostatic charge/ discharge cycling. The experimental results showed that the graphene possessed a thin wrinkled paper-like morphology and large specific surface area （342 m2 · g ^-1）. The first reversible specific capacity of the graphene was as high as 905 mA· h · g ^-1 at a current density of 100 mA · g ^-1. Even at a high current density of 1000 or 2000 mA · g ^-1, the graphene maintained good cycling stability, indicating that it is a promising anode material for high-performance lithium ion batteries.

Numerical study on the thermo-stress of ZrO_2 thermal barrier coatings by high-intensity pulsed ion beam irradiation

This paper studies numerically the thermo-mechanical effects of ZrO2 thermal barrier coatings （TBCs） irradiated by a high-intensity pulsed ion beam in consideration of the surface structure. Taking the deposited energy of ion beams in TBCs as the source term in the thermal conduction equation, the distribution of temperature in TBCs was simulated. Then, based on the distribution, the evolution of thermal stress was calculated by the finite element method. The results show that tensile radial stress formed at the valley of TBC surfaces after irradiation by HIPIB. Therefore, if cracks happen, they must be at valleys instead of peaks. As for the stress waves, no matter whether through peak or valley position, tensile and compressive stresses are present alternately inside TBCs along the depth direction, and the strength of stress decreases with time.

Influence of high-intensity pulsed ion beams irradiation on oxidation behavior of 316L stainless steel at 700℃

316L stainless steel samples, as a widespread used material, were irradiated with HIPIB at the beam parameters of ion energy 300 keV, current density 100, 200 and 300 A/cm2, shot number 10 and pulse duration 75 ns. The surface morphology and the phase structure in the near surface region of original and treated samples were analyzed with scanning electron microscopy (SEM) and X-ray diffractometry (XRD). It is shown that the HIPIB irradiation can smooth the surface of the samples, and the preferred orientation is present in the surface layer of irradiated coupons. The influence of HIPIB irradiation on the oxidation behavior of 316L stainless steel at 700℃for up to 100 h was investigated. Electron probe microanalysis (EPMA) was used to study the distribution of elements in the oxidation products. It is found that the oxidation behavior of the irradiated coupons depends greatly on the ion current density of HIPIB. HIPIB irradiation with ion current density of 100 A/cm2 slightly reduces the oxidation rate with respect to the unirradiated coupon. The improvement of the oxidation resistance can be attributed to more oxide of Cr that forms on the surface of the irradiated coupons. In contrast, HIPIB irradiation with ion current density of 200 or 300 A/cm2 is proved to be detrimental, causing a higher oxidation rate.

Preliminary Research Results for the Generation and Diagnostics of High Power Ion Beams on FLASH II Accelerator

The preliminary experimental results of the generation and diagnostics of high power ion beams on FLASH II accelerator are reported. The high-power ion beams presently are being produced in a pinched diode. The method for enhancing the ratio of ion to electron current is to increase the electron residing time by pinching the electron flow. Furthermore, electron beam pinching can be combined with electron reflexing to achieve ion beams with even higher efficiency and intensity. The anode plasma is generated by anode foil bombarded with electron and anode foil surface flashover. In recent experiments on FLASH II accelerator, ion beams have been produced with a current of 160 kA and an.energy of 500 keV corresponding to an ion beam peak power of about 80 GW. The ion number and current of high power ion beams were determined by monitoring delayed radioactivity from nuclear reactions induced in a 12C target by the proton beams. The prompt 7-rays and diode bremsstrahlung X-rays were measured with a PIN semi-conductor detector and a plastic scintillator detector. The current density distribution of ion beam were measured with a biased ion collector array. The ion beams were also recorded with a CR-39 detector.

Ultra-High Mass-Loading Cathode for Aqueous Zinc-Ion Battery Based on Graphene-Wrapped Aluminum Vanadate Nanobelts

Rechargeable aqueous zinc-ion batteries(AZIBs)have their unique advantages of cost efficiency,high safety,and environmental friendliness.However,challenges facing the cathode materials include whether they can remain chemically stable in aqueous electrolyte and provide a robust structure for the storage of Zn2+.Here,we report on H11Al2V6O23.2@graphene(HAVO@G)with exceptionally large layer spacing of(001)plane(13.36?).The graphene-wrapped structure can keep the structure stable during discharge/charge process,thereby promoting the inhibition of the dissolution of elements in the aqueous electrolyte.While used as cathode for AZIBs,HAVO@G electrode delivers ideal rate performance(reversible capacity of 305.4,276.6,230.0,201.7,180.6 mAh g?1 at current densities between 1 and 10 A g?1).Remarkably,the electrode exhibits excellent and stable cycling stability even at a high loading mass of^15.7 mg cm?2,with an ideal reversible capacity of 131.7 mAh g?1 after 400 cycles at 2 A g?1.

Absolute dielectronic recombination rate coefficients of highly charged ions at the storage ring CSRm and CSRe

Dielectronic recombination(DR)is one of the dominant electron-ion recombination mechanisms for most highly charged ions(HCIs)in cosmic plasmas,and thus,it determines the charge state distribution and ionization balance therein.To reliably interpret spectra from cosmic sources and model the astrophysical plasmas,precise DR rate coefficients are required to build up an accurate understanding of the ionization balance of the sources.The main cooler storage ring(CSRm)and the experimental cooler storage ring(CSRe)at the Heavy-Ion Research Facility in Lanzhou(HIRFL)are both equipped with electron cooling devices,which provide an excellent experimental platform for electron-ion collision studies for HCIs.Here,the status of the DR experiments at the HIRFL-CSR is outlined,and the DR measurements with Na-like Kr25^(+)ions at the CSRm and CSRe are taken as examples.In addition,the plasma recombination rate coefficients for Ar12^(+),14^(+),Ca14^(+),16^(+),17^(+),Ni19^(+),and Kr25^(+)ions obtained at the HIRFL-CSR are provided.All the data presented in this paper are openly available at https://doi.org/10.57760/sciencedb.j00113.00092.

On the Plasma (ion) Carburized Layer of High Nitrogen Austenitic Stainless Steel

The manganese concentration of austenitic stainless steel decreases from the inner layer towards the surface of the plasma (ion) carburized layer due to the evaporation of manganese from the specimen surface. The carbon concentration in the carburized layer is influenced by alloyed elements such as Cr, Ni, Si, and Mo, as well as Nitrogen. This study examined the effects of nitrogen on the properties of the carburized layer of high nitrogen stainless steel. Plasma (ion) carburizing was carried out for 14.4 ks at 1303 K in an atmosphere of CH4+H2 gas mixtures under a pressure of 350 Pa. The plasma carburized layer of the high nitrogen stainless steel was thinner than that of an austentric stainless steel containing no nitrogen. This suggested that the nitrogen raised the activity of carbon in the plasma carburized layer, GDOES measurement indicated that the nitrogen level in the layer did not vary after plasma (ion) carburizing.

Risk of simulated microgravity on testicular injury induced by high-LET carbon-ion beams in mice

This study investigated the impact of simulated microgravity on acute injury induced by low doses of carbon ions in male reproductive organs of mice,and determined alterations in spermatogenic function and expression levels of apoptotic factors in mice following exposure to acute irradiation after 7 days of simulated microgravity.The results demonstrated that significant reductions in spermatozoa,primary spermatocytes and spermatogonia,and increased globular cells in seminiferous tubule and pro-apoptotic proteins were observed in the group exposed to over0.4 Gy irradiation.Collectively,the data suggest that lesions inflicted by simulated microgravity are not markedly modified by lower doses of irradiation(0.2 Gy)in mouse testis compared to the control group.However,testicular impairments were markedly evident in the group exposed to higher doses of carbon ions plus simulated microgravity,which may be due at least in part to elevated apoptosis initiated by the mitochondrial apoptosis pathway in germ cells.

Ionization and single electron capture in collision of highly charged Ar^(16+) ions with helium

This paper uses the two-centre atomic orbital close-coupling method to study the ionization and the single electron capture in collision of highly charged Ar^16＋ ions with He atoms in the velocity range of 1.2-1.9 a.u.. The relative importance of single ionization （SI） to single capture （SC） is explored. The comparison between the calculation and experimental data shows that the SI/SC cross section ratios from this work are in good agreement with experimental data. The total single electron ionization cross sections and the total single electron capture cross sections are also given for this collision. The investigation of the partial electron capture cross section shows a general tendency of capture to larger n and l with increasing velocity from 1.2 to 1.9 a.u..

Peripheral collisions of highly charged ions with metal clusters

Within the framework of the dynamical classical over-barrier model,the soft collisions between slow highly charged ions（SHCIs） Ar 17＋ and the large copper clusters under large impact parameters have been studied in this paper.We present the dominant mechanism of the electron transfer between SHCIs and a large metal cluster by computational simulation.The evolution of the occupation of projectile ions,KL x satellite lines,X-ray yields,Auger electron spectrum and scattering angles are provided.

Theoretical study of electron-impact broadening for highly charged Ar XV ion lines

Spectral line widths produced by collisions between charged particles and emitters are of special interest for precise plasma spectroscopy.The highly charged Ar XV ion is demonstrated to have strong intrashell electron interactions,which manifest as an atomic system with many resonance structures,due to the quasi-degeneracy of orbital energies.In this paper we use the relativistic R-matrix method to investigate the electron-impact broadening of highly charged Ar XV ion spectral lines under the impact approximation.It is found that the results considering resonance structures are significantly different from those of the distorted wave approach.Furthermore,we propose a new empirical formula with a correction term to take into account the effect of resonances for electron-impact widths over a relatively wide range of plasma conditions.The corresponding fitting parameters of the new empirical formula for all 47 calculated transitions are also given with an estimated accuracy within 1%,which should be convenient for practical applications.The dataset that supported the findings of this study is available in Science Data Bank,with the link https://doi.org/10.57760/sciencedb.j00113.00101.

Carbon foam with microporous structure for high performance symmetric potassium dual-ion capacitor

A novel carbon foam with microporous structure(CFMS),with the advantages of a simple fabrication process,low energy consumption,large specific surface area and high conductivity,has been prepared by a facile one-step carbonization.In addition,the carbon foam possesses suitable interlayer spacing in short range which is flexible to accommodate the deformation of carbon layer caused by the ion insertion and deinsertion at the charge and discharge state.Furthermore,a low cost carbon-based symmetric potassium dual-ion capacitor(PDIC),which integrates the virtues of potassium ion capacitors and dual-ion batteries,is successfully established with CFMS as both the battery-type cathode and the capacitor-type anode.PDIC displays a superior rate performance,an ultra-long cycle life(90%retention after 10000 cycles),and a high power density of 7800 W kg^-1 at an energy density of 39Whkg^-1.The PDIC also exhibits excellent ultrafast charge and slow discharge properties,with a full charge in just 60 s and a discharge time of more than 3000 s.