Planar Compact Dual-Band Coupled-Line Balun with High Isolation

A planar circuit structure, which is based on three cascaded pairs of coupled lines, an open stub, and an isolation resistor, is proposed in this paper to design a compact dual.band balun with high isolation. This circuit features equal power division with out of phase, all ports matching, high isolation between two outputs, compact structure, and inherent impedance transformation. The closedform design equations are derived based on the traditional transmission.line theory and even.(odd.) mode analysis. A practical dual.band balun, which operates at 0.9/1.8GHz, is designed and fabricated to validate the function of equal power division with out of phase and high isolation between two outputs. The consistency between the simulated and measured results verify the design theory.

Design and Verification of High Attenuation Vibration Isolation Damper in Remote Sensing Satellite Transport

To solve the safe horizontal transportation by rail&road of remote sensing satellite problem in the process of unpredictable dynamic load,a high attenuation vibration isolation damper(hereinafter referred to as vibration isolation damper)was developed.By simulation analysis and transportation test using satellite structural model and engineering prototype,validity and reliability of the vibration isolation damper was verified,which can meet the requirements of vibration and shock from various transportation conditions.

Isolation and cloning of the gene encoding high affinity phosphate transporter in rice

High affinity phosphate transporterplays an important role in plantadapting to low phosphorus. Isolationof genes coding this kind of proteinhas attracted worldwide scholars toaccomplish. We aimed to isolate thegene and transfer it to target plants

Characterization of Highly Pathogenic Avian Influenza H5N1 Viruses Isolated from Domestic Poultry in China

The highly pathogenic avian influenza （HPAI） H5N1 virus has caused several outbreaks in domestic poultry. Despite great efforts to control the spread of this virus, it continues to evolve and poses a substantial threat to public health because of a high mortality rate. In this study, we sequenced whole genomes of eight H5N1 avian influenza viruses isolated from domestic poultry in eastern China and compared them with those of typical influenza virus strains. Phylogenetic analyses showed that all eight genomes belonged to clade 2.3.2.1 and clade 7.2, the two main circulating clades in China. Viruses that clustered in clade 2.3.2.1 shared a high degree of homology with H5N1 isolates located in eastern Asian. Isolates that clustered in clade 7.2 were found to circulate throughout China, with an east-to-west density gradient. Pathogenicity studies in mice showed that these isolates replicate in the lungs, and clade 2.3.2.1 viruses exhibit a notably higher degree of virulence compared to clade 7.2 viruses. Our results contribute to the elucidation of the biological characterization and pathogenicity of HPAI H5N1 viruses.

A Wideband E-Plane Crossover Coupler for Terahertz Applications

In this paper,a new approach to design terahertz(THz)E-plane crossover coupler is reported.By cascading two symmetrical septum polarizers,a simple structure with wide operating bandwidth and high isolation performance is achieved.The working principle is explained by operating waveguide modes.To simplify the optimization process,the scattering matrix(S-matrix)of the crossover is calculated.Two prototypes loaded and unloaded electromagnetic band gap(EBG)are fabricated and measured.The electrical contact problem at assembly plane is eliminated by the prototype loaded EBG.A measured bandwidth of 17.3%from 92.5 to 110 GHz for reflection and isolation coefficients<-15 dB and transmission coefficient>-2 dB is achieved.

The Dual-Polarized Staggered Stacked Patches Antenna

A new dual-polarized staggered and stacked patches antenna with wide impedance band-width and high isolation is proposed.The antenna consists of two groups of radiation patches,in 7 layers,and uses the orthogonal adjacent coupling structure on staggered layer to excite a pair of linear polarization modes.Thanks to the staggered feeder mode,it has increased the isolation performance be-tween ports and compressed the transverse size of the antenna.As a result of the combination of staggered stack-up between the patches and the stepped gradient shape of the main radiating patches,it has effectively expanded the impedance bandwidth of the antenna.The proposed antenna is simulated,fabricated and measured.The staggered feeding structure effectively reduces the cross-sectional area of the antenna,and greatly improves the isolation between feeding ports.The measurement results show that the impedance bandwidths for vertical and horizontal polarization modes are 40.2%(638-960 MHz)and 40.0%(645-968 MHz)respectively when the return loss is lower than-10 dB,and the isolation between feeding ports is better than-30 dB.Meanwhile,the antenna has a stable and symmetrical radiation pattern across the working band,therefore making it suitable to be used as antenna and antenna array element of mobile wireless communication base stations.

Prevalence and Anti-Microbial Susceptibility of Methicillin Resistant Staphylococcus aureus at Moi Teaching and Referral Hospital Eldoret

Background: Methicillin-resistant Staphylococcus aureus (MRSA) are pathogens that have major negative impact in all aspects of patient care and are increasingly being recognized as troublesome pathogens in the community. The MRSA are multi-drug resistant bacteria responsible for higher morbidity, mortality and cost of treatment in the affected patients. Research on MRSA antimicrobial susceptibility and resistance in developing countries is limited;hence accurate burden is not certain. Objective: To determine the prevalence and susceptibility pattern of MRSA in S. aureus isolates from patients treated in various units at Moi Teaching and Referral Hospital. Study Design: Cross-sectional design was used to conduct the study. Methods and Materials: Staphylococcus aureus stored isolates from patients at various units at Moi Teaching and Referral Hospital (MTRH) were identified by laboratory conventional methods. Methicillin resistant Staphylococcus aureus was determined using cefoxitin and oxacillin, discs and confirmed by Penicillin Binding Protein (PBP2a’) latex agglutination test. Susceptibility testing was performed according to the Clinical Laboratory Standards Institute procedures. Control strains used were: ATCC 43300 for Methicillin resistant S. aureus (MRSA) strains and ATCC 29213 for methicillin susceptible S. aureus (MSSA) strains. Nine anti-microbials (Erythromycin, Gentamycin, Tetracycline, Vancomycin, Rifampin, Linezolid, Ciprofloxacin, Clindamycin and Fucidicacid) were used to test the anti-microbial susceptibility patterns. Control organisms were run along with the isolates for quality Assurance. The data was analyzed using STATA version 11. Categorical variables were summarized as frequencies and the corresponding percentages. Results were presented using tables and graphs. Results: A total of 107 isolates of S. aureus were obtained, of which 39 (37%) were MRSA. Most of the MRSA, 13 (33%) and 7 (17%), were found in pus and tracheal aspirate samples respectively. Majority of the MRSA isolates were from surgical wards and intensive care unit. The MRSA isolates were highly resistant to erythromycin (92%;36/39) and tetracycline (92% 36/39) and moderately susceptible to linezolid (77% 30/39), Vancomycin (75% 29/39) and fucidic acid (67% 26/39). A total of 28 (74.4%) MRSA isolates were Clindamycin inducible resistant. Conclusions and Recommendations: This study showed that MRSA is a significant pathogen at MTRH. The MRSA were most detected in pus specimens and least in peritoneal aspirates. Routine Screening of S. aureus isolates for MRSA strains at MTRH is therefore imperative. Infection control measures should be put in place to reduce prevalence and prevent the spread of MRSA at MTRH.

Rapid and efficient method for isolating plant high molecular weight(HMW)DNA with high purity

PREPARATION of HMW DNA (Megabase-size) is the basis for construction of genomic library with large DNA inserts such as bacterial artificial chromosome (BAC) and yeast artificial chromosome (YAC), and for long-range physical mapping. It can also be used for the macro-study of repeat sequences. Since HMW DNA during preparation is inclined to be sheared physically and digested by internal nucleases, it is very difficult to prepare the HMW DNA. Initially, plant HMW DNA was prepared by embedding protoplasts in the low melting-point (LMP) agarose; however, it had several disadvantages: (ⅰ) Culture of protoplasts was time-consuming, costly and tedious. ( ⅱ ) It was only used successfully for limited

Design of broadband dual-polarized antenna with integrated Marchand balun

A design of broadband dual-polarized antenna with low cross polarization and high isolation was presented. The antenna is composed of a cross dipole, a folded ground, two feeding networks, and a reflector. The impedance bandwidth was enhanced by utilizing the mutual coupling between the two dipoles. A kind of meandering folded Marchand balun was skillfully integrated on the support column of the antenna to excite the dipole differentially, which can deliver both balanced （within 0.5 dB） power splitting and consistent （±5°） phase shifting from 1.71 GHz to 2.17 GHz. The standing wave ratios （SWRs） of each port are less than 1.5. By using this feeding network, the antenna has good performance in isolation （〉 45 dB） and cross polarization （〉 30 dB） over the entire operating frequency band. Moreover, the gain （-8.6 dB） of the proposed antenna is stable with frequency and the antenna structure is very firm due to the support column. The proposed antenna can be easily formed an array for digital cellular system （DCS）, personal communications service （PCS） and 3rd generation （3G） applications.

Power flow in the coupled dynamic system of machinery and building floor

The transmision mechanism of vibrational power flow in the complex flekible coupled system of machinery mouned on a multi-storey plant building via isolators are studied in this paper from the viewpoint of energy. In view of practical isolation designs in engineering,an asymmetric isolation system with mtiltiple isolators on a fiekible foundation is modeled, in which the interactions between the machine and the floor, and among different mouating points are taken illto account. Moreover, the transmission characteristics of power flow in the system concerned are analyzed with the use of subsystem mobility synthetic techaique. Further more,the power flow spectra of the asymmetric system are calculated and compared with those of symmetric one to reveal the effects of asymmetricity and system parameters on the power flow.Finally, new approaches to the control of structural vibration and acoustics for this kin of problems are proposed.