Hot Spot in Materials with Structural Defects under High Shear Loading Rates

The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.

Effect of high shear rate on solidification microstructure of semisolid AZ91D alloy

To investigate the effects of rotation speed and shearing time on morphology of semisolid AZ91D alloy,experimental work was undertaken using a twin-screw slurry maker.The results show that increasing the rotation speed and reasonable time can give rise to substantial grain refinement during continuous shearing stage,which can be attributed to the increasing of effective nucleation rate caused by the extremely uniform temperature due to high shear rate and high degree of turbulence.Comparing with low rotation speed at the same thermal condition,the analysis indicates that the microstructures obtained at high rotation speed are homogenous spherical and fine grains instead of dendritic or rosette and exhibits uniform distribution in the eutectic matrix.

DEM modeling of high shear wet granulation of a simple system

High shear wet granulation(HSWG) is one of the most poorly understood processes with known difficulties in optimization and scale up. The purpose of the current study is to develop a DEM model which can be applied under dynamic process conditions with high predictive capacity to improve process insight. The DEM model is used to predict agglomeration as a function of impeller speed and liquid addition rate in a high shear wet granulator. The DEM model tracks dynamic formation and breakage of liquid bridges between particles as liquid binder in the system is added, and corrects for the change in material properties as a function of the binder content.

Application of High Shear Agitation for Desulfurization of Gasoline Using Ionic Liquids

The high shear agitation device was first adopted for gasoline desulfurization by ionic liquids. The effect of benzylimidazol fluoborate in desulfurization of gasoline and the influence of moisture on deuslfurization rate were investigated. The experimental results showed that the ionic liquid could effectively decrease the sulfur content of gasoline and the optimal conditions were as follows: The reaction could be carried out at room temperature, a volumetric ratio between oil and the liquid of 2:1, a volumetric ratio between water and ionic liquid of 0.04:1, a rotational speed of 5 krad/s, and a reaction time of 1 minute. The desulfurization rate of gasoline reached 53.6%, and the gasoline yield was up to 97.3%. The ionic liquid could be recycled for repeated use, and the use of high shear agitation for gasoline would have good prospects.

Specific inhibiting effects of Ilexonin A on von Willebrand factor-dependent platelet aggregation under high shear rate

Background llexonin A (IA), purified from the Chinese herbal medicine Maodongqing (Ilex pubescens Hook, et Am) has been commonly used in south China to treat thrombotic disorders. In this study, we aimed to study the inhibiting effects and mechanism of IA on von Willebrand factor (vWF)-dependent high shear-induced platelet aggregation.Methods vWF-dependent high shear (10 800 s-1) induced aggregation of platelets obtained from normal donors in the presence or absence of IA was measured by a modified cone-plate viscometer and shear-induced vWF binding was measured by quantitative flowcytometry with monoclonal antibody known to bind exclusively to the C-terminal domain of vWF (LJ-C3) directly labeled with fluorescein isothiocyanate (FITC). P-selectin surface expression was also measured by a similar method with FITC conjugated anti-P-selectin monoclonal antibody (WGA1).Results Shear-induced platelet aggregation was inhibited by IA in a dose-dependent manner. The extent of aggregation decreased from (78. 6 ±4. 6)% in the absence of IA to (36. 5 ±2.1)% in the presence of IA (3. 3 mmol/L) (P<0. 0001, n =9) with a high shear rate of 10800 s-1. vWF binding and P-selectin expression were also inhibited by IA in a dose dependent manner. The number of binding FITC-LJ-C3 molecules increased after exposure of platelet-rich plasma to a high shear rate of 10800 s-1 for 6 minutes, but this shear-induced increased binding platelet surface vWF molecules and P-selectin expression can be decreased in the presence of IA.Conclusion vWF binding and vWF mediated platelet activation, aggregation occurring under high shear rate were inhibited by IA. IA may be a unique antithrombotic drug inhibiting the vWF-GP Ibα interaction, and may thus facilitate drug design targeting arterial thrombosis.

High shear stress induces atherosclerotic vulnerable plaque formation through angiogenesis

Rupture of atherosclerotic plaques causing thrombosis is the main cause of acute coronary syndrome and ischemic strokes.Inhibition of thrombosis is one of the important tasks developing biomedical materials such as intravascular stents and vascular grafts.Shear stress(SS)influences the formation and development of atherosclerosis.The current review focuses on the vulnerable plaques observed in the high shear stress(HSS)regions,which localizes at the proximal region of the plaque intruding into the lumen.The vascular outward remodelling occurs in the HSS region for vascular compensation and that angiogenesis is a critical factor for HSS which induces atherosclerotic vulnerable plaque formation.These results greatly challenge the established belief that low shear stress is important for expansive remodelling,which provides a new perspective for preventing the transition of stable plaques to high-risk atherosclerotic lesions.

Effects of rotor and stator geometry on dissolution process and power consumption in jet-flow high shear mixers

The jet-flow high shear mixer(JF-HSM)is a new type of intensified equipment with special configurations of the rotor and the stator.The mass transfer property and power consumption were studied in the solid-liquid system for a series of JF-HSMs involving different configuration parameters,such as rotor diameter,rotor blade inclination,rotor blade bending direction,stator diameter,and stator bottom opening diameter.The flow characteristics were examined by computational fluid dynamic simulations.Results indicate that the turbulent power consumption of the JF-HSM is affected by the change in rotor blade inclination and stator bottom opening.With the increase in the shear head size and the change in the rotor into a backward-curved blade,the solid-liquid mass transfer rate can be remarkably increased under the same input power.Dimensionless correlations for the mass transfer coefficient and power consumption were obtained to guide the scale-up design and selection of such a new type of equipment to intensify the overall mixing efficiency.

Scale-up of a high shear wet granulation process using a nucleation regime map approach

Scale-up of the high shear wet granulation （HSWG） process is considered a challenge because HSWG is complex and influenced by numerous factors, including equipment, formulation, and process variables. For a system of microcrystalline cellulose and water, HSWG experiments at three scales （1, 2, and 4 L working vessel） were conducted with a granulator. Scale-up was implemented on the basis of a nucleation regime map approach. To keep dimensionless spray flux and drop penetration time constant, water addition time at three processing scales were 300, 442, and 700 s, respectively. The other process parameters were kept unchanged. Granule size distributions were plotted and compared, and scanning electron microscopy was used to analyze granule surface morphology. Physical characterization was undertaken using a modified SeDeM method. At nearly all scales, granule yield was greater than 85% and all the cosine values were larger than 0.89. At the same experiment points, granules at all scales had similar surface morphology and similar physical characteristics. The results demonstrate that a rational scaling-up of the HSWG process is feasible using a regime map approach.

Morphology and Mechanical Properties of Immiscible Polyethylene/Polyamide12 Blends Prepared by High Shear Processing

In this work, completely immiscible polyethylene/polyamidel2 （PE/PA12） blends were prepared by high shear extruder. The morphology and mechanical properties of the blends were investigated as a function of rotation speed. It was found that the high shear processing is an effective method to improve the dispersion of the PAl2 phase in PE matrix when PA 12 contents are 5 wt% and 10 wt%, and the dispersed phase particle size is reduced with the increase of rotation speed from 100 r/min to 500 r/min. However, with further increase of PAl2 content to 20 wt%, high shear processing has no effect on the phase morphology of the blends. Accordingly, a largely increased elongation at break and impact strength are observed for PE/PAl2/95/5 and PE/PA12/90/10 blends obtained at high rotation speeds but no effect on the property of PE/PAI2/80/20. Annealing experiment demonstrated that the obtained phase morphology is not stable thus compatibilizer should be introduced in the future work. This work could provide a guideline for the application of high shear processing in the preparation of polymer blends with huge polarity difference.

Micromixing performance of the teethed high shear mixer under semi-batch operation

Semi-batch operated reaction processes are necessary for some competitive reaction systems to achieve a desirable process selectivity and productivity of fine chemical products.Herein the structural and operating parameters of the teethed high shear mixers were adjusted to study the micromixing performance in the semi-batch operated system,using the Villermaux/Dushman reaction system.The results indicate that the rising of the rotor speed and the number of rotor teeth,the decrease of the width of the shear gap and the radial distance between the feed position and the inner wall of stator can enhance the micromixing level and lead to the decrease of the segregation index.Additionally,computational fluid dynamics calculations were carried out to disclose the evolution of the flow pattern and turbulent energy dissipation rate of the semi-batch operated high shear mixer.Furthermore,the correlation was established with a mean relative error of 8.05%and R^(2)of 0.955 to fit the segregation index and the parameters studied in this work,which can provide valuable guidance on the design and optimization of the semi-batch operated high shear mixers in practical applications.

Further investigations on the influence of scale-up of a high shear granulator on the granule properties

This study focuses on the characterisation of strength, density, and size of granules produced in various scales of a high shear granulator. Calcium carbonate （Durca165） was used as the feed powder and aqueous polyethylene glycol （PEG 4000） as the binder. The dried granules were analysed for their strength, density, size distribution, and wall make-up. Granules were produced in granulators with four scales, 1, 5, 50, and 250 L under three scale-up rules of constant tip speed, constant shear stress, and constant Froude number. The results show that regardless of equipment scale, increasing the impeller speed has a great effect on crushing strength and stress. The underlying cause is an increase in granule density due to more consolidation at higher impeller speeds. Wall make-up is significantly reduced to less than 5% as the scale is increased from 1 to 250 L. The results of this study corroborate our previous findings that the constant tip speed rule is the best criterion for scale-up of high shear granulators.

Breaking and Characteristics of Ganoderma Lucidum Spores by High Speed Entrifugai Shearing Pulverizer

The spores of Ganoderma lucidum were ground and broken to ultrafine particles by high speed centrifugal shearing（HSCS） pulverizer. The characteristics of Ganoderma lucidum spores were analyzed by scanning electron microscope （SEM）, Fourier transform infrared spectrophotometry （FTIR）. Ultraviolet-visible pectrophotometer was used to determine the extraction ratio of aqueous solubility polysaccharide between the raw and broken spores. The immunological function on the mice before and after the breaking of spores wan investigated. The experimental results show that after being ground, the sporoderm-broken ratio reachs 100%, the original active ingredients of ganoderma lucidum spores do not change, and the extraction ratio of aqueous solubility polysaccharide is greatly increased by 40.08%. The broken spores show much higher immunological activity comparing with original spores of Ganoderma lucidum.

Experimental study on the shear strength of side fillet weld of Q235B steel post high temperatures

In order to learn the variation laws of shear strength of side fillet weld post high temperatures, the tension tests were conducted after the double-strapped side fillet welded joints which were cooled down from different high temperatures with different cooling patterns. The tests indicate that specimens appear brittle fracture at the side fillet weld during the tension tests after cooling down. The fracture su（face is located in the welding throat. The maximum temperatures undergone and the cooling pattern are major factors influencing shear strength of side fillet welded joint post high temperatures. The shear strength reduces by 24% at most within 900 ~C. Based on the experimental results, the calculation formulas of shear strength of side fillet weld post high temperatures were proposed. Conclusions supply references for evaluation damage and reinforcement of steel structure post fire.

Assessment of Deformation of Shear Localized Chip in High Speed Machining

As the cutting speed goes higher, the mechanism of chip deformation will be changed significantly, i.e., continuous chip in low cutting speed will shift to serrated chip with shear localization. For the shear localized chip, the parameters used to assess the chip deformation for continuous chip, such as shorten coefficient ξ, shear angle φ and shear strain ε, can not describe the chip deformation correctly or comprehensively. This paper deals with the assessment of chip deformation of shear localization. There are two deformation regions in shear localized chip, one is the chip segment body with relative smaller plastic deformation, another one is the boundary between segments with shear localization, so called shear band. Considering the two distinct deformation regions, two parameters are used to define their deformation respectively. According to the analysis of chip formation process, the equations have been deduced to calculate the shear strains of shear band ε, shear strain of chip segment ε 1 and shear rate so that the shear localized chip deformation can be assessed correctly and comprehensively. By use of this assessment, the chip deformation in machining selenium treated stainless steel (STSS) and common stainless steel at various cutting conditions is investigated. The experiment results obtained by the machining of stainless steel prove that: (1) the shear strain and strain rate increase with the increasing of cutting speed; (2) the shear strain in shear band can be over 10 when cutting speed exceeding 200 m/min for both types of stainless steel, and it is much higher than the strain of chip segment. The difference will be enlarged as the cutting speed increasing; (3) As the comparison, the shear strain for the STSS is a little lower than that for JIS304; (4) The stain rate is extremely high (= 2.5×10 5 1/s ). In range of cutting speed less than 180 m/min, the strain rate for STSS is lower than that for JIS304. However, when the cutting speed is higher than 180 m/min, the strain rate for STSS is higher than that for JIS304.

Evaluation of the Shear Strength of Perfobond Rib Connectors in Ultra High Performance Concrete

Since the previous strength prediction models for the perfobond rib connector were proposed based upon the results of push-out tests conducted on concretes with compressive strength below 50 MPa, push-out test is performed on perfobond shear connectors applying ultra high performance concretes with compressive strength higher than 80 MPa to evaluate their shear resistance. The test variables are chosen to be the diameter and number of dowel holes and, the change in the shear strength of the perfobond rib connector is examined with respect to the strength of two types of UHPC: steel fiber-reinforced concrete with compressive strength of 180 MPa and concrete without steel fiber with compressive strength of 80 MPa. The test results reveal that higher concrete strength and larger number of holes increased the shear strength, and that higher increase rate in the shear strength was achieved by the dowel action. The comparison with the predictions obtained by the previous models shows that the experimental results are close to the values given by the model proposed by Oguejiofor and Hosain [1].

Electrical Resistivity Contrasts and High Flow Rates Discontinuous Aquifers Identification in a Sheared Crystallophyllian Basement Zone at Boniérédougou (North-Central Côte d’Ivoire)

This study proposes an alternative approach to the investigation of high flow hydrogeological fractures within the basement in the Dabakala region of north-central Côte d’Ivoire. The used approach consists of exploring the subsurface by measuring electrical resistivity contrasts along the main shear direction within crystallophyllian rocks. Electrical resistivity profiling and vertical electrical sounding techniques, coupled with boreholes monitoring, have identified fractured aquifers whose best flow rates are around 96 and 116 m3/h. These aquifers mostly hosted in granodiorite have an average strength of 10 meters and are located at depth of around 100 meters. They are associated with open fractures created by tangential shear stresses that have affected the Dabakala volcano-sedimentary trench formations. The search for fractured aquifers along the main shear direction offers great perspective for obtaining high flow rates.

液相剥离法高效制备石墨烯的研究进展

石墨烯是一种具有优良物理化学性质的二维纳米材料,广泛应用于电池、催化、传感器、印刷、生物医药等领域。然而,石墨烯及其衍生产品的应用与发展面临着巨大挑战——低成本、高品质、规模化生产。本文综述了液相剥离法高效制备石墨烯的研究进展,重点探讨了电化学插层法、溶剂插层法、高温膨胀法和微波膨胀法等液相剥离的前处理方法原理以及对石墨烯剥离效果的影响;分析了水基溶剂、有机溶剂和混合溶剂等剥离溶剂的优缺点与选取原则;对比了超声、高剪切和微通道等过程强化设备的剥离原理和优缺点;简述了离心分离的后处理方法以及分离效果;最后对液相剥离法宏量制备石墨烯的发展趋势进行了展望:通过结合人工智能等方法进行多目标优化,开发无残留的功能化插层剂并匹配温和快速的膨胀方法,寻找低毒、低沸点、高分散的溶剂体系,精确调控液相剥离设备作用机理,设计连续化梯级离心设备,实现液相剥离制备石墨烯的连续化、规模化、低成本快速制备。

High Temperature Strain Structures and Quartz C-Axis Fabrics from Mylonitic Rocks in the Ailaoshan-Red River Shear Zone,Yunnan,and Their Tectonic Implication

The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed linearly along the shear zone,e.g.Xuelongshan,Diancangshan, Ailaoshan and Day Nui Con Voi from north to south.They bear a lot of lines of evidence for the tectonic evolution of the eastern Tibetan at different crustal levels in different tectonic stages.Controversy still exists on the deformation structures,microstructures and their relationship with metamorphisms along the ASRR.In this paper detailed microstructural and EBSD（Electron Backscattered Diffraction） fabric analysis of some highly sheared granitic rocks from different massifs along the ASRR are conducted.High temperature structures and microstructures are preserved in unsheared gneisses,in weakly sheared xenoliths or in some parts of the highly sheared rocks（mylonites）.Several types of high temperature quartz c-axis fabrics show symmetrical patterns or transitions from symmetrical to asymmetrical patterns.The former are attributed to coaxial deformation during regional shortening in an early stage of the Indian-Eurasian tectonic interaction and the latter are related to the transitions from coaxial compression to noncoaxial shearing during the post-collisional ASRR left lateral shearing.

高层剪力墙结构多目标智能设计方法

高层剪力墙结构智能设计包括智能建模和智能优化两个环节。目前智能建模环节缺乏梁自动化布置和荷载自动化布置;智能优化环节只考虑材料成本而未考虑施工的便捷性。此外,现有的智能设计方法均局限于单标准层的高层剪力墙结构。为此,该文提出了高层剪力墙结构多目标智能设计方法,包括多标准层高层剪力墙结构的智能建模和多目标优化。多标准层高层剪力墙结构智能建模包含剪力墙智能布置、梁自动化布置、板自动化布置和荷载自动化布置;以材料成本和施工便捷性为目标,采用分步优化策略和基于小生境技术的遗传算法对高层剪力墙结构进行多目标优化。通过实际工程算例对所提出的方法进行了验证,结果表明,所提出的高层剪力墙结构多目标智能设计方法稳定、可靠,可以较好地兼顾材料成本和施工的便捷性,并能显著缩短设计周期。

光甘草定烟酰胺纳米乳的制剂评价与透皮吸收

为提高光甘草定和烟酰胺的透皮吸收性能,利用两种高能乳化法制备了纳米乳(HPH-NE和HSSU-NE),对其形态、粒径、Zeta电位、稳定性和皮肤渗透性能进行了评价与考察.结果表明:两种纳米乳颗粒均为规则球形,未见聚集现象,平均粒径分别为51.60 nm和42.98 nm,Zeta电位分别为-50.44 mV和-68.50 mV,并且在离心、4℃和20℃以及加速试验条件下均具有较好的稳定性,两种方法制成的纳米乳相对普通乳液具有更好的皮肤渗透性能,光甘草定的平均渗透速率提高3~5倍,烟酰胺的平均渗透率提高1.6~2.6倍,为光甘草定的纳米制剂以及化妆品应用研究奠定了坚实基础.