Preparation of Silica Gels with High Adsorption Activity for Extraction of Zirconium

Silica gels with a high specific surface area and high adsorption activity ,which have high selectivity and high adsorption capacity for zirconium in acidic high level radioactive liquid waste (HLLW), have been prepared from water-glass and hydrochloric acid through adding surfactants. The surfactant modifies the surface of the primary sol particles, thus suppresses the growth of the primary particle,but accelerates their agglomeration. The action of the surfactant is similar to that of the organic structure-directing agent and makes the sol cluster cross-linkage ring-like network in short order. The specific surface area of the silica gel is 998 m 2/g; the static adsorption capacity and the adsorption distribution coefficient for zirconium in HLLW are 32.6 mg/g and 56.1 mL/g, respectively.

Nitrogen and sulfur dual-doped high-surface-area hollow carbon nanospheres for efficient CO2 reduction

The electrochemical reduction of CO2(CO2 RR) can substantially contribute to the production of useful chemicals and reduction of global CO2 emissions. Herein, we presented N and S dual-doped high-surface-area carbon materials(SZ-HCN) as CO2 RR catalysts. N and S were doped by one-step pyrolysis of a N-containing polymer and S powder. ZnCl2 was applied as a volatile porogen to prepare porous SZ-HCN. SZ-HCN with a high specific surface area(1510 m2 g–1) exhibited efficient electrocatalytic activity and selectivity for CO2 RR. Electrochemical measurements demonstrated that SZ-HCN showed excellent catalytic performance for CO2-to-CO reduction with a high CO Faradaic efficiency(~93%) at-0.6 V. Furthermore, SZ-HCN offered a stable current density and high CO selectivity over at least 20 h continuous operation, revealing remarkable electrocatalytic durability. The experimental results and density functional theory calculations indicated that N and S dual-doped carbon materials required lower Gibbs free energy to form the COOH* intermediate than that for single-N-doped carbon for CO2-to-CO reduction, thereby enhancing CO2 RR activity.

Highly stable aqueous rechargeable Zn-ion battery:The synergistic effect between NaV_(6)O_(15) and V_(2)O_(5) in skin-core heterostructured nanowires cathode

The aqueous rechargeable Zn-ion batteries based on the safe,low cost and environmental benignity aqueous electrolytes are one of the most compelling candidates for large scale energy storage applications.However,pursuing suitable insertion materials may be a great challenge due to the strong electrostatic interaction between Zn^(^(2+))and cathode materials.Hence,a novel NaV_(6)O_(15)/V_(2)O_(5) skin-core heterostructure nanowire is reported via a one-step hydrothermal method and subsequent calcination for high-stable aqueous Zn-ion batteries(ZIBs).The NaV_(6)O_(15)/V_(2)O_(5) cathode delivers high specific capacity of 390 m Ah/g at 0.3 A/g and outstanding cycling stability of 267 m Ah/g at 5 A/g with high capacity retention over 92.3%after 3000 cycles.The superior electrochemical performances are attributed to the synergistic effect of skin-core heterostructured NaV_(6)O_(15)/V_(2)O_(5),in which the sheath of NaV_(6)O_(15) possesses high stability and conductivity,and the V_(2)O_(5) endows high specific capacity.Besides,the heterojunction structure not only accelerates intercalation kinetics of Zn^(2+)transport but also further consolidates the stability of the layers of V_(2)O_(5) during the cyclic process.This work provides a new perspective in developing feasible insertion materials for rechargeable aqueous ZIBs.

Life test research of a high specific impulse Hall thruster HEP-140MF

In this study,a high specific impulse Hall thruster,HEP-140 MF,having a high discharge voltage,was used to accelerate ions.We aimed to obtain a high specific impulse and an acceleration zone moving downstream toward the channel exit to reduce wall sputtering erosion of the walls of the discharge channel,hence ensuring an enhanced lifetime.To study the lifetime characteristics of the high specific impulse Hall thruster,a life test was performed on the HEP-140 MF thruster for the first time,and performance parameters,such as thrust,specific impulse,and efficiency,were measured.Changes in the performance parameters and evolutions in the surface profiles of the discharge channel wall were summarized.The reasons contributing to these changes during the life test were analyzed.Moreover,the accelerated life test method was validated on the HEP-140 MF.

Novel high- with low specific on-resistance high voltage lateral double-diffused MOSFET

A novel voltage-withstand substrate with high-K（HK, k 〉 3.9, k is the relative permittivity） dielectric and low specific on-resistance（Ron,sp） bulk-silicon, high-voltage LDMOS（HKLR LDMOS）is proposed in this paper. The high-K dielectric and highly doped interface N＋-layer are made in bulk silicon to reduce the surface field drift region. The high-K dielectric can fully assist in depleting the drift region to increase the drift doping concentration（Nd） and reshape the electric field distribution. The highly doped N＋-layer under the high-K dielectric acts as a low resistance path to reduce the Ron,sp. The new device with the high breakdown voltage（BV）, the low Ron,sp, and the excellent figure of merit（FOM = BV^2/Ron,sp） is obtained. The BV of HKLR LDMOS is 534 V, Ron,sp is 70.6 m？·cm^2, and FOM is 4.039 MW·cm^（-2）.

Research Progress on High Specific Energy Cathode Materials for Rechargeable Lithium Sulfur Batteries

An overview of the developing survey, research actuality and the future development of high specific energy and power lithium sulfur rechargeable batteries was presented systemically. By introducing the character of sulfur composite material and discussing some promising cathode materials, it may provide some foundation for people to go deep into researching and empoldering the sulfur composite material.

Superhydrophilic nickel hydroxide ultrathin nanosheets enable high-performance asymmetric supercapacitors

Superhydrophilic surfaces have been applied for supercapacitor;however,during energy storage reaction,how the wettability affects the process of electrochemical reaction specifically is still unclear.Herein,we demonstrate superhydrophilic surface for promotion of electrochemical reactions by liquid affinity and further explain the mechanism,where the transition of the wettability state caused by the change in surface free energy is the main reason for the obvious increase in specific capacitance.Through citric acid assistance strategy,an intrinsically hydrophobic Ni(OH)_(2)thick nanosheets(HNHTNs,16 nm)can be transitioned into superhydrophilic Ni(OH)_(2)ultrathin nanosheets(SNHUNs,6.8 nm),where the water contact angle was 0°and the surface free energy increased from 8.6to 65.8 mN·m^(-1),implying superhydrophilicity.Compared with HNHTNs,the specific capacitance of SNHUNs is doubled:from 1230 F·g^(-1)(HNHTNs)to 2350 F·g^(-1)(2A·g^(-1))and,even at 20 A·g^(-1),from 833 F·g^(-1)(HNHTNs)to 1670 F·g^(-1).The asymmetric capacitors assembled by SNHUNs and activated carbon show 52.44 Wh·kg^(-1)at 160W·kg^(-1)and excellent stability with~90%retention after5000 cycles(~80%retention after 9500 cycles).The promotion of electrochemical performances is ascribed to the change of surface wettability caused by surface free energy,which greatly increase affinity of electrode to the surrounding liquid environment to reduce the interface resistance and optimize the electron transport path.

Carbon cathode with heteroatom doping and ultrahigh surface area enabling enhanced capacitive behavior for potassium-ion hybrid capacitors

Potassium-ion hybrid capacitors(PIHCs)are widely regarded as highly promising energy storage devices,due to their exceptional energy density,impressive power density,and abundant potassium resources.Unfortunately,restricted by the inherent capacitive storage mechanism,the carbon cathodes possess a much lower specific capacity than battery-type anodes.Therefore,designing high-performance carbon cathodes is extremely urgent for the development of PIHCs.Herein,N,O codoped porous carbon(NOPC)was fabricated through the NaCl hard template method and combined KOH/melamine chemical activation technique,displaying the characteristics of abundant N/O content(4.7 at%/16.9 at%),ultrahigh specific surface area(3092 m^(2)g^(-1))and hierarchical pore network.The designed NOPC cathode delivers a high specific capacity(164.4 mAh.g^(-1)at 0.05 A.g^(-1))and superior cyclability(95.1%retention ratio at 2 A·g^(-1)over 2500 cycles).Notably,the adjustable ratio of micropores to mesopores facilitates the achievement of the optimal bal-ance between capacity and rate capability.Moreover,the pseudocapacitance can be further augmented through the incorporation of N/O functional groups.As expected,the graphite//NOPC based PIHC possesses a high energy density of 113 Wh·kg-at 747 W·kg^(-1)and excellent capacity retention of 84.4% fter 400 cycles at 1.0 A·g^(-1).This work introduces a novel strategy for designing carbon cathodes that enhances the electrochemical performance of PIHCs.

Nitrogen-doped hierarchical few-layered porous carbon for efficient electrochemical energy storage

Large surface area,high conductivity,and rich active site of carbon electrode materials are necessary characteristics for energy storage devices.However,high conductivity and high nitrogen doping of carbon electrode materials are difficult to coordinate.Here,a facile method via the carbonization of nitrogen-containing Schiff base polymer has been developed to prepare high conductivity and high nitrogen-doped hierarchical porous carbon.The organic components with a benzene ring structure in the polymer promote the formation of more sp^(2)-graphitized carbon,which is beneficial for the improvement of electrical conductivity.Nitrogen-doped hierarchical porous carbon calcined at 900℃ under the NH3 atmosphere possesses high nitrogen content of 7.48 at%,a large specific surface area of 1613.2m2/g,and high electrical conductivity of 2.7 S/cm.As electrode materials in an aqueous-based supercapacitor,nitrogen-doped hierarchical porous carbon exhibits superior specific capacitance of 385 F/g at 1 A/g as well as excellent rate performance(242 and 215 F/g at a current density of 100 and 200 A/g,respectively).In addition,the specific capacitance of electrode measured in a two-electrode system is 335 F/g at 1 A/g,and the long-term cycling stability can be achieved with more than 94%initial capacitance after 10000 cycles.The constructed symmetric supercapacitor delivers high energy density and high power density.The outstanding electrochemical performances combined with the novel and scalable synthetic approach make the nitrogen‐doped hierarchical porous carbon potential electrode material for electrochemical devices.

Characterization of porous cobalt hexacyanoferrate and activated carbon electrodes under dynamic polarization conditions in a sodium-ion pseudocapacitor

We report here the activated carbon and cobalt hexacyanoferrate composite,which is applied as the electrode materials in symmetric supercapacitors containing a 1.0 M Na_(2)SO_(4) aqueous electrolyte.This novel material combines high specific surface area and electrochemical stability of activated carbon with the redox properties of cobalt hexacyanoferrate,resulting in maximum specific capacitance of 329 F g^(-1) with large voltage working window of 2.0 V.Electrochemical studies indicated that cobalt hexacyanoferrate introduces important pseudocapacitive properties accounting for the overall charge-storage process,especially when I<0.5 A g^(-1).At lower gravimetric currents(e.g.,0.05 A g^(-1))and up to 1.0 V,the presence of cobalt hexacyanoferrate improves the specific energy for more than 300%.In addition,to better understanding the energy storage process we also provided a careful investigation of the electrode materials under dynamic polarization conditions using the in situ Raman spectroscopy and synchrotron light Xray diffraction techniques.Interesting complementary findings were obtained in these studies.We believe that this novel electrode material is promising for applications regarding the energy-storage process in pseudocapacitors with long lifespan properties.

Defect-rich and highly porous carbon nanosheets derived from Ti_(3)AlC_(2) MAX with good lithium storage properties

Defect-rich,highly porous two-dimensional carbon nanosheets(CNS) have attracted tremendous research interests in catalysis and environmental purification and other fields,because of their unique micromorphology,chemical stability and high specific surface area.Herein,in this work,we report a new solution to synthesize an ultrathin two-dimensional CNS with rich defects and abundant pores via two-step etching the Ti_(3)AlC_(2)with the help of I2and NaOH.The CNS thickness,specific surface area and pore volume could be all tunable by adding the amount of I2.And the highest specific surface area and pore volume of the synthesized 2D CNS can be achieved 1134.4 m^(2)/g and 0.80 cm^(3)/g,with a thickness of only 0.64 nm and a yield of 35.9%.When employed as the anodes for lithium-ion batteries,the synthesized CNS anodes exhibit good cycling and rate capabilities.This work provides a novel and facile strategy for synthesizing highly porous and defective 2D carbon materials with good lithium storage properties.

Two-dimensional porous carbon derived from pollen with enlarged interlayer distance enhanced electrocatalytic oxidation of n-valeraldehyde to octane

Electrocatalytic n-valeraldehyde oxidation reaction was an inexpensive and eco-friendly method to control n-valeraldehyde contamination and produce high value-added octane.However,low-cost and readily available electrocatalysts with high current efficiency were urgently needed.Herein,two-dimensional porous carbon derived from pollen with enlarged interlayer distance was built by alkali activation method,applying in electrocatalytic n-valeraldehyde oxidation reaction.The enlarged interlayer distance was verified by X-ray diffraction(XRD)and high-angle annular dark-field scanning transmission electron microscope(HAADF-STEM).Electrocatalytic experiments consequences showed activated biomass derived carbon possessed a higher electrocatalytic activity and octane selectivity than unactivated catalyst.Systematic tests and in situ infrared experiments demonstrated that enlarged interlayer distance was positively correlated with specific surface area of catalysts,large specific surface area provided abundant absorption sites,facilitated the adsorption for n-valeraldehyde,and further promoted the transformation of n-valeraldehyde to octane.This work also provides a new avenue for creating high-performance electrocatalysts in terms of lattice engineering.

Supercapacitors based on high-surface-area graphene

Exfoliated graphite oxide was prepared by an improved Hummers method and was then reduced to graphene with hydrazine in the presence of ammonium hydroxide.N2adsorption–desorption measurement showed that graphene so obtained had a specific surface area as high as 818 m2/g.Galvanostatic charge/discharge curves demonstrated that the as-prepared graphene exhibited a specific capacitance of 186.9 F/g at a current density of 0.1 A/g and that about 96%of the specific capacitance was retained after 2000 cycles at a current density of 5 A/g.

Cracked bark-inspired ternary metallic sulfide(NiCoMnS_(4)) nanostructure on carbon cloth for high-performance aqueous asymmetric supercapacitors

In this paper,we report a high-performance selfsupported supercapacitor electrode composed of a cracked bark-shaped Ni-Co-Mn ternary metallic sulfide(NiCoMnS4)nanostructure on carbon cloth prepared by a simple one-step hydrothermal process and subsequent electrochemical treatment.The electrode delivers a high specific discharge capacity of up to 2470.4 F g^(-1) at 1 A g^(-1) and high rate performances of1635.6 F g^(-1) at 10 A g^(-1) and 910.2 F g^(-1) even at 32 A g^(-1).Cycling tests indicate that NiCoMnS_(4) could maintain >91.1% of its initial capacity and nearly 100% Coulombic efficiency over10,000 cycles at 8 A g^(-1).An aqueous asymmetric supercapacitor assembled with NiCoMnS_(4) as the cathode,activated carbon as the anode,and 1 mol L^(-1) KOH as the electrolyte delivers an energy density of 68.2 W h kg^(-1)at 850.1 W kg^(-1) and capacity retention of 92.5% after 10,000 cycles at 4 A g^(-1).Given the excellent performance and simple material preparation of our proposed device,this study provides a valuable foundation for the development of self-supported metallic sulfide-based electrodes with high electrochemical properties for potential application in aqueous asymmetric supercapacitors.

Walnut septum-derived hierarchical porous carbon for ultra-high-performance supercapacitors

The conversion of biomass waste into eco-nomical and high-performance energy storage devices receives significant attention.Herein,a facile and green method to prepare porous active carbon from walnut sep-tum is applied to the electrode materials of supercapacitors.The effect of chemical etching reagent(KOH)on the microstructure and specific capacitance of the porous car-bon are explored.The modified BC-2.0,with a KOH/walnut septum mass ratio of 2∶1,exhibits large specific surface area of 1003.9 m^(2)·g^(-1)with hierarchical micro-mesoporous structures.BC-2.0 reveals a superior specific capacitance of 457 F·g^(-1)at 1 A·g^(-1).The flexible sym-metric supercapacitor in gel electrolyte(KOH/PVA)exhi-bits considerable synergetic energy-power output performance.The results indicate that walnut septum is a better precursor to obtain activated carbons relative to other biomass carbon sources.The large mesoporosity after activation effectively boosts the electrochemical properties of supercapacitor.Consequently,the walnut septum has potential to be a superior electrode material for supercapacitors.

N,P-codoped porous carbon derived from chitosan with hierarchical N-enriched structure and ultra-high specific surface Area toward high-performance supercapacitors

In this work,a facile"carbonization-activation"strategy is developed to synthesize N,P-codoped hierarchical porous carbon.Phosphoric acid is innovatively introduced during the hydrothermal process to achieve in-situ P doping as well as create abundant pores,and the employment of sodamide is of vital importance to simultaneously serve as activating agent and N-source to succeed a high-level N doping.Thus,the obtained samples exhibit a unique three-dimensional hierarchical structure with an ultra-high specific surface area(3646 m^(2)g^(-1))and ultra-high N-doping level(9.81 at.%).Computational analyses confirm that N,P co-doping and higher N content can enhance active sites and widen potential differences of carbon materials to improve their capacitance.The as-prepared carbon materials demonstrate superior electrochemical performances,such as an ultra-high capacitance of 586 Fg^(-1)at 1 Ag^(-1),a superior rate capability of 409 Fg^(-1)at 20 Ag^(-1),and excellent long-term stability of 97%capacitance retention after10,000 cycles in 6 M KOH.Moreover,an assembled symmetric supercapacitor delivers a high energy density of 28.1 Wh kg^(-1)at the power density of 450 W kg^(-1)in 1 M Na_(2)SO_(4),demonstrating a great potential for applications in supercapacitors.

Determination of royal jelly freshness by ELISA with a highly specific anti-apalbumin 1,major royal jelly protein 1 antibody

Major royal jelly protein 1（MRJP1）, designated apalbumin 1, has been regarded as a freshness marker of royal jelly（RJ）. A MRJP1-specific peptide（IKEALPHVPIFD） identified by bioinformatics analysis of homologous members of the major royal protein family was synthesized and used to raise polyclonal anti-MRJP1 antibody（antiSP-MRJP1 antibody）. Western blot analysis showed that anti-SP-MRJP1 antibody only reacted with MRJP1 in RJ. In contrast, the previously reported antibody against recombinant MRJP1（anti-R-MRJP1 antibody） reacted with other members of MRJP family in RJ. Enzyme-linked immunosorbent assay（ELISA） using anti-SP-MRJP1 antibody demonstrated that MRJP1 content in RJ stored at 40 °C significantly degraded by 37.3%, 55.9%, 58.0%, 60.6%, 65.7%, 72.7%, and 73.1% at 7, 14, 21, 28, 35, 42, and 49 d, respectively, when compared with MRJP1 content in fresh RJ（0 d）. Optical density analysis of MRJP bands from sodium dodecyl sulfate-polyacrylamide gel electrophoresis（SDS-PAGE） profiles demonstrated that the degradation of MRJP1, MRJP2, MRJP3, and MRJP5 in RJ was strongly and positively correlated with the period of storage（P〈0.0001）. Our results indicated anti-SP-MRJP1 antibody was highly specific for MRJP1, and ELISA using the antibody is a sensitive and easy-to-use method to determine the freshness and authenticity of RJ.

High-performance aqueous asymmetric supercapacitors based on the cathode of one-step electrodeposited cracked bark-shaped nickel manganese sulfides on activated carbon cloth

In this work,we report a high-performance self-standing supercapacitor electrode of mixed nickel manganese sulfides (NMSs)with a cracked-bark shape grown by one-step electrochemical deposition on activated carbon cloth (ACC).The electrode possesses outstanding electrochemical properties,including a high specific capacitance of up to 3142.8 F g^(-1)at 1.0 A g^(-1),the high-rate performance (~1206.8 F g^(-1)at 60.0 A g^(-1)),and cycle stability (~92.3%capacitance retention after 8000 cycles at8 A g^(-1)).An asymmetric supercapacitor assembled using NMSs on ACC as the cathode,activated carbon on carbon cloth as the anode and 1.0 mol L;KOH as the electrolyte delivers a high energy density of 111.2 W h kg^(-1)at 800.0 W kg^(-1)and the prominent cycling performance of~93.2%capacitance retention after 10000 cycles at 5 A g^(-1)with the Columbic efficiency of around 100%during these 10000 cycles.The high performance and facile preparation indicate that the NMSs on ACC hold a huge potential as the electrode for supercapacitors.

3D Printing Engineered Multi-porous Cu Microelectrodes with In Situ Electro-Oxidation Growth of CuO Nanosheets for Long Cycle,High Capacity and Large Rate Supercapacitors

Developing excellent pseudocapacitive electrodes with long cycle,high areal capacity and large rate has been challenged.3 D printing is an additive manufacture technique that has been explored to construct microelectrodes of arbitrary geometries for high-energy–density supercapacitors.In comparison with conventional electrodes with uncontrollable geometries and architectures,3 D-printed electrodes possess unique advantage in geometrical shape,mechanical properties,surface area,especially in ion transport and charge transfer.Thus,a desirable 3 D electrode with ordered porous structures can be elaborately designed by 3 D printing technology for improving electrochemical capacitance and rate capability.In this work,a designed,monolithic and ordered multi-porous 3 D Cu conductive skeleton was manufactured through 3 D direct ink writing technique and coated with Cu O nanosheet arrays by an in situ electro-oxidation treatment.Benefiting from the highly ordered multiporous nature,the 3 D-structured skeleton can eff ectively enlarge the surface area,enhance the penetration of electrolyte and facilitate fast electron and ion transport.As a result,the 3 D-printed Cu deposited with electro-oxidation-generated CuO(3 DP Cu@Cu O)electrodes demonstrates an ultrahigh areal capacitance of 1.690 F cm^(-2)(38.79 F cm^(-3))at a large current density of 30 m A cm^(-2)(688.59 m A cm^(-3)),excellent lifespan of 88.20%capacitance retention after 10,000 cycles at 30 m A cm^(-2) and superior rate capability(94.31%retention,2-30 m A cm^(-2)).This design concept of 3 D printing multi-porous current collector with hierarchical active materials provides a novel way to build high-performance 3 D microelectrodes.

A highly specific ratiometric two-photon fluorescent probe to detect dipeptidyl peptidase Ⅳ in plasma and living systems

Subject Code:H30With the support by the National Natural Science Foundation of China and National Basic Research Program of China,the group led by Prof.Ge Guangbo(葛广波)and Prof.Yang Ling(杨凌)from the Laboratory of Pharmaceutical Resource Discovery,Dalian Institute of Chemical Physics,Chinese Academy of Sciences,reported a highly specific ratiometric two-photon fluorescent probe to detect