Research of DP600 high strength steel wheels

Steel has been used as a traditional wheel materials for a long time.Before 1980' s,over 90% wheels were made of steels.Then,the yield strength of wheel steels increased gradually from 240 -350 MPa to 600 MPa or higher.The advanced high strength steels become the main wheel materials.Since 1990's,DP600 has been broadly applied in steel wheels oversea.However,there was little research of application of high strength steel wheels(especially wheel disc) in domestic wheel industrial.In presence, DP600 steel wheel is only developed in FAWSH by using imported CKD.Other domestic steel wheel manufacturers did little work on high strength DP600 wheel discs.Baosteel wheels Co.Ltd.is the first domestic company producing DP600 steel discs and has become the leading company in production of high strength wheel.Because of the high strength of DP600,its formability,springback,and wrinkle have become the keys of the successful application of DP600 steel.In this paper,the metallurgical and mechanical properties are firstly introduced and formation problems of DP600 are described compared to traditional steels.Secondly,FLD analysis has been done.Wrinkle and more springback are recognized.To solve these problems,an optimized solution is designed and the good result is obtained.The test has shown that the fatigue property of steel wheel discs made by DP600 have been greatly improved.

Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys

An analytical model is established to study the influence of lattice distortion and fraction of Hf on the yield strength of the BCC TiNbTaZrHfx multi-component high entropy alloys （HEAs）. Meanwhile, the mechanism of solid solution strengthening caused by lattice distortion is also discussed in the HEA. The distorted unit cell is introduced to indicate the lattice distortion effects induced by the differences of the atomic size and shear modulus by doping other elements in Ti-based metal. The results show that the calculated values of the alloying yield strength considering the path of least resistance are obtained with regard to various grain sizes for the equiatomic TiNbTaZrHf HEA, which is well in line with the experimental results. Furthermore, it is predicted that the alloying yield strength is the largest value in the case of the same grain size for the Hf atomic fraction of 0.122. The meaningful modeling could provide a theoretical method to investigate the yield strength and alloying design of other BCC HEAs in the future.

Characteristics of Paleoproterozoic Subduction System in Western Margin of Yangtze Plate

Paleoproterozoic subduction strongly occurred in the western margin of Yangtze plate. The basalticandesite volcanics of Ailaoshan Group and Dibadu Formation had been formed during paleo QinghaiTibet oceanic plate subduction under the paleoYangtze plate. Their trace element geochemistry suggests that their forming environments are continentalmarginarc and back arcbasin respectively. Consequently, the Paleoproterozoic subduction system in the western margin of Yangtze plate was established. Ailaoshan Group and Dibadu Formation came from an enriched mantle source that was contaminated by crustal sediments carried by subducted slab, and formed the Paleoroterozoic metamorphic basement of western margin of Yangtze plate. Ailaoshan Group is actually western boundary of Yangtze plate.

What is going on in magnesium alloys？

China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and materials scientists over the past decades. Nowadays, a large number of young-generation researchers have been inspired by their predecessors and become the key participants in the fields of Mg alloys, which consequently led to the establishment of China Youth Scholar Society for Magnesium Alloys Research in 2015. Since then, the first two China Youth Scholars Symposiums on Mg Alloys Research had been held at Harbin （2015） and Chongqing （2016） China, respectively. A number of crucial research inter- ests related to fundamental and applied Mg research were discussed at the conferences and summarized in this short perspective, aiming to boost far-reaching initiatives for development of new Mg-based materials to satisfy the requirements for a broad range of industrial employments. Herein, four main aspects are included as follows： i） Plastic deformation mechanism and strengthening strategy, ii） Design and development of new Mg-based materials, iii） Key service properties, and iv） New processing technologies.

A review of friction stir welding of steels： Tool, material flow, microstructure, and properties

Considerable progress has been achieved in friction stir welding （FSW） of steels in every aspect of tool fab- rication, microstructure control and properties evaluation in the past two decades. With the development of reliable welding tools and precise control systems, FSW of steels has reached a new level of technical maturity. High-quality, long welds can be produced in many engineering steels. Compared to traditional fusion welding, FSW exhibits unique advantages producing joints with better properties. As a result of active control of the welding temperature and/or cooling rate, FSW has the capability of fabricating steel joints with excellent toughness and strength. For example, unfavorable phase transformations that usu- ally occur during traditional welding can be avoided and favorable phase fractions in advanced steels can be maintained in the weld zone thus avoiding the typical property degradations associated with fusion welding. If phase transformations do occur during FSW of thick steels, optimization of microstructure and properties can be attained by controlling the heat input and post-weld cooling rate.