High Temperature Strain Structures and Quartz C-Axis Fabrics from Mylonitic Rocks in the Ailaoshan-Red River Shear Zone,Yunnan,and Their Tectonic Implication

The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed linearly along the shear zone,e.g.Xuelongshan,Diancangshan, Ailaoshan and Day Nui Con Voi from north to south.They bear a lot of lines of evidence for the tectonic evolution of the eastern Tibetan at different crustal levels in different tectonic stages.Controversy still exists on the deformation structures,microstructures and their relationship with metamorphisms along the ASRR.In this paper detailed microstructural and EBSD（Electron Backscattered Diffraction） fabric analysis of some highly sheared granitic rocks from different massifs along the ASRR are conducted.High temperature structures and microstructures are preserved in unsheared gneisses,in weakly sheared xenoliths or in some parts of the highly sheared rocks（mylonites）.Several types of high temperature quartz c-axis fabrics show symmetrical patterns or transitions from symmetrical to asymmetrical patterns.The former are attributed to coaxial deformation during regional shortening in an early stage of the Indian-Eurasian tectonic interaction and the latter are related to the transitions from coaxial compression to noncoaxial shearing during the post-collisional ASRR left lateral shearing.

Study of High Temperature Deformation and Recrystallization in W9Mo3Cr4V Steel

The behavior of high temperature deformation and recrystallization of W9Mo3Cr4V steel have been studied in this paper. Dynamic precipitation during deformation has also been investigated. In W9Mo3Cr4V steel, stress strain curves exhibit many features. The deformation structures and the effects of deformation parameters on dynamic recrystallization are more complicated than those in low alloy steels. For W9Mo3Cr4V steel, there is a large number of residual carbides on the matrix at high temperature. Also, many second carbides precipitate from the matrix during high temperature deformation. These two kinds of carbides (especially the latter) make the behavior of deformation and dynamic recrystallization in W9Mo3Cr4V steel different from those in low alloy steels. ABSTRACT:The behavior of high temperature deformation and recrystallization of W9Mo3Cr4V steel have been studied in this paper. Dynamic precipitation during deformation has also been investigated. In W9Mo3Cr4V steel, stress strain curves exhibit many features. The deformation structures and the effects of deformation parameters on dynamic recrystallization are more complicated than those in low alloy steels. For W9Mo3Cr4V steel, there is a large number of residual carbides on the matrix at high temperature. Also, many second carbides precipitate from the matrix during high temperature deformation. These two kinds of carbides (especially the latter) make the behavior of deformation and dynamic recrystallization in W9Mo3Cr4V steel different from those in low alloy steels.

Prediction of flow stresses at high temperatures with artificial neural networks

On the basis of the data obtained on Gleeble 1500 Thermal Simulator, the predicting models for the relation between stable flow stress during high temperature plastic deformation and deformation strain, strain rate and temperature for 1420 Al Li alloy have been developed with BP artificial neural networks method. The results show that the model on basis of BPNN is practical and it reflects the actual feature of the deforming process. It states that the difference between the actual value and the output of the model is in order of 5%. [

HIGH TEMPERATURE DEFORMATION BEHAVIOR OF TiAl INTERMETALLIC COMPOUND

The behavior of TiAl interrnetallic compound of Ll_0 type under compressive deformation at high temperatures and its recrystallization microstructure have been studied.The compressive proof stress of the polycrystalline TiAl was found to be positive temperature dependence as same as the single crystai one.The correlation of the flow stress together with strain rate and deformation temperature is in good agreement with the expression: ε=Aσ_p^nexp(-Q/RT) Adjusting the deformation temperature and strain rate to a decrease in flow stress of alloy down to below its brittle fracture stress may improve successfully not only the hot working of the TiAl-base alloy but also the fineness of the recrystallized grains.

High Temperature Deformation of Al_2O_3/Cu Composites

This work concerns with the high temperature deformation of internally oxidized Al2O3/Cu composites. The investigation revealed that dispersive alumina can obstruct dislocation sliding and define the subgrain size thereby improve significantly the strength of the materials at high temperature. The sliding of dislocations is a main deformation mechanism in the given temperature range. The sliding of grain boundary and diffusive creep play important roles at high temperature and low strain rate. The dispersoids can raise the recrystallization temperature to higher than 1223 K. Dynamic recovery is a main softening way under the experimental conditions. Higher deformation rate and lower deformation temperature imply a higher flow stress.

Study on Damage of High Temperature Plastic Deformation for Al-Li A lloy

The security of use for Al-Li alloy will be greatly influenced by the damage degree of plastic deformation within i t at high temperature . Based on continuum damage mechanics theory, the damage e volution of Al-5.44Mg-2.15Li-0.12Zr alloy during plastic deforming at high te mperature is simulated by using the damage evolution model of high temperature p lastic deformation. The changing rule of its inner damage with deformation tempe rature, strain rate and strain is gained in this paper. The equation of damage e volution for high temperature plastic deformation is developed, providing an aca demic basis for the technology of plastic process of Al-Li alloys.

Effect of temperature on the mechanical abnormity of the quasicrystal reinforced Mg-4%Li-6%Zn-1.2%Y alloy

The serrated phenomena of the quasicrystalline phase reinforced Mg-4%Li-6%Zn-1.2%Y alloy after the extrusion,solid solution treatment and aged treatment have been investigated at different temperatures.The result shows that when the temperature is above 100℃,the serrated phenomenon becomes weak and all the serrated amplitudes are lower than 1 MPa.Among them,the serrated amplitude of samples in aged condition is the lowest and the value is only 0.1-0.2 MPa.The underneath mechanism for the lower plastic instability at higher temperature(≥100℃)can be ascribed to the weak pining effect of solute atoms on the movement of dislocation and release of the pile-up dislocations.

Behavior of AISI 316L Steel Subjected to Uniaxial State of Stress at Elevated Temperatures

This paper presents an experimental investigation on an AISI 316L stainless steel regarding mechanical properties and short uniaxial creep tests at elevated temperatures. The short time creep tests were carried out under different but constant stresses. The obtained data of ultimate tensile strength, yield strength, creep curves and effects of elevated temperatures on mechanical properties were presented. For a selected rheological model, material parameters were obtained. As a justification, such rheological model is implemented in the finite element procedure for an uniaxially stressed specimen in selected environmental conditions.

Effect of Morphology for Novel Bainite/Martensite Dual-Phase High Strength Steel on Its Hydrogen Embrittlement Susceptibility

With TEM、SEM, various high temperature deformed structures in W9Mo3Cr4V steel were investigated. The sub structures,recrystallized nuclei, as well as the dynamic precipitation were also studied and analyzed. The relationship between recrystallized structures and dynamic precipitation was discussed. The results showed that the deformed structures in W9Mo3Cr4V steel are more complicated than those in low alloy steels. Because W9Mo3Cr4V steel is a high speed steel, there are a large number of residual carbides on the matrix. Also, much dynamic precipitating carbides will precipitate during deformation at high temperature.

Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe(41)Mn(25)Ni(24)Co8Cr2high entropy alloy

The effect of the grain size on the tensile properties and deformation mechanisms of a nonequiatomic Fe(41)Mn(25)Ni(24)Co8 Cr2 high-entropy alloy was studied in the temperature range between 298 and 1173 K by preparing the samples with three different grain sizes through severe plastic deformation and subsequent annealing:ultrafine(sub)grain size(≤0.5μm),8.1μm and 590.2μm.In the temperature between 298 and773 K,the material with the large grain size of 590.2μm exhibited the largest tensile ductility(57%-82%)due to its high strain hardening associated with mechanical twinning,but it exhibited the lowest strength due to its large grain size.The material with the ultrafine(sub)grain size exhibited the lowest tensile ductility(3%-7%)due to a greatly reduced strain hardening ability after severe plastic deformation,but it exhibited the highest strength due to the dislocation strengthening and grain refinement strengthening.At tensile testing at temperatures above 973 K,recrystallization occurred in the material with the ultrafine(sub)grains during the sample heating and holding stage,leading to the formation of fine and equiaxed grains with the sizes of 6.8-13.5μm.The deformation behavior of the Fe(41)Mn(25)Ni(24)Co8 Cr2 with different grain sizes in the high temperature range between 973 and 1173 K,where pseudosteady-state flow was attained in the stress-strain curves,could be explained by considering the simultaneous contribution of grain boundary sliding and dislocation-climb creep to total plastic flow.The activation energies for plastic flow for the materials with different grain sizes were similar as^199 kJ/mol.In predicting the deformation mechanism,it was important to consider the change in grain size by rapid grain growth or recrystallization during the sample heating and holding stage because grain boundary sliding is a grain-size-dependent deformation mechanism.The sample with the ultrafine(sub)grains exhibited the large tensile elongations of 30%-85%due to its high strain rate sensitivity,m(0.1-0.5)at temperatures of973-1173 K.The material with the large grain size of 590.2μm exhibited the very small elongations of0.2%-8%due to its small m values(0.1-0.2)and occurrence of brittle intergranular fracture at the early stage of plastic deformation.

High Temperature Deformation Behavior of Fe-9Ni-C Alloy

The high temperature deformation behavior of the 9Ni steel has been studied by the Gleeble-3500 tester. The relationship between deformation resistance and deformation degree, deformation temperature and deformation rate was revealed. The results show that when the deformation degree is less than 0.2, the deformation resistance increases by about 70 to 200 MPa, while the deformation degree varied between 0.2 and 0.4, the deformation resist- ance increases by about 30--40 MPa, when the deformation degree is larger than 0.4, the deformation resistance in- creases slowly, some become stable gradually. The influence of deformation temperature on deformation resistance is larger, and deformation resistance at higher temperature is about 160 MPa smaller than at lower temperature. Higher deformation rate leads to larger deformation resistance. The deformation resistance increases about 70 to 110 MPa with the increase of the deformation rate. A new and highly accurate mathematical model of the steel was established to describe the deformation behavior during rolling.

Understanding effects of microstructural inhomogeneity on creep response-New approaches to improve the creep resistance in magnesium alloys

Previous investigations indicate that the creep resistance of magnesium alloys is proportional to the stability of precipitated intermetallic phases at grain boundaries.These stable intermetallic phases were considered to be effective to suppress the deformation by grain boundary sliding,leading to the improvement of creep properties.Based on this point,adding the alloying elements to form the stable intermetallics with high melting point became a popular way to develop the new creep resistant magnesium alloys.The present investigation,however,shows that the creep properties of binary Mg-Sn alloy are still poor even though the addition of Sn possibly results in the precipitation of thermal stable Mg_(2)Sn at grain boundaries.That means other possible mechanisms function to affect the creep response.It is finally found that the poor creep resistance is attributed to the segregation of Sn at dendritic and grain boundaries.Based on this observation,new approaches to improve the creep resistance are suggested for magnesium alloys because most currently magnesium alloys have the commonality with the Mg-Sn alloys.

Optimization of thermal processing parameters of Ti555211 alloy using processing maps based on Murty criterion

Isothermal compression testing of Ti555211 titanium alloys was carried out at deformation temperatures from 750 to 950 °C in 50 °C intervals with a strain rate of0.001-1.000 s^（-1）. The high-temperature deformation behavior of the Ti555211 alloy was characterized by analysis of stress-strain behavior, kinetics and processing maps. A constitutive equation was formulated to describe the flow stress as a function of deformation temperature and strain rate, and the calculated apparent activation energies are found to be 454.50 and 207.52 k J mol^（-1）in the a b-phase and b-phase regions, respectively. A processing map based on the Murty instability criterion was developed at a strain of 0.7. The maps exhibit two domains of peak efficiency from 750 to 950 °C. A ＊60 % peak efficiency occurs at 800-850 °C/0.001-0.010 s^（-1）. The other peak efficiency of ＊60 % occurs at C950 °C/0.001-0.010 s^（-1）, which can be considered to be the optimum condition for high-temperature working of this alloy.However, at strain rates of higher than 1.000 s^（-1）and deformation temperatures of 750 and 950 °C, clear process flow lines and bands of flow localization occur in the hightemperature deformation process, which should be avoided in Ti555211 alloy hot processing. The mechanism in stability domain and instability domain was also discussed.