High-temperature electrochemical performance and phase composition of Ti_(0.7) Zr_(0.5) V_(0.2) Mn_(1.8-x)Ni_x hydrogen storage electrode alloys

The rapid development of electric vehicles demands the development of high performance nickel metal hydride battery that is able to endure high temperature. The discharge properties of Ti 0.7 Zr 0.5 V 0.2 Mn 1.8- x Ni x ( x =0.4, 0.8, 1.1, 1.4, 1.7)hydrogen storage alloys was investigated and its phase composition was analyzed using X ray diffraction. The results show that the cycling life was improved as the content of nickel increases. When x =0.4, 0.8, 1.1 and 1.4, the main phase is MgZn 2 type C14 Laves phase and the second one is cubic TiNi phase. When x =1.7, the Laves phase structure disappears. EDAS analysis shows that the increase of nickel content is effective in suppressing the dissolution of vanadium component in alloys. [

Current Sharing Technology in Transmission Conductors of Cold Dielectric High Temperature Superconducting Cables Using Second-generation HTS Wires

冷绝缘高温超导电缆的导电层一般设计为多层结构以满足大电流载流特性，但伴随层数的增加，超导体上的集肤效应会引起电缆输电导体各层电流分布不均匀的问题，从而造成电缆损耗增加和传输性能下降。采用基于动态惯性权重因子的粒子群优化算法，提出了电缆导体层电流层间均流优化的设计方法。应用第2代高温超导材料钇钡铜氧涂层导体，通过建立超导电缆的等效电路模型，考虑电场、磁场等约束因素，对一根1km长，110kV／3kA等级的冷绝缘高温超导电缆进行优化设计，获得了电缆本体结构参数及输电导体层和屏蔽层的电流分布。比较优化前后层电流的结果可知，优化后超导电缆各导体层电流与平均电流相比最大不平衡率小于3．5％，各屏蔽层电流达到均布，较好地实现了电缆各导体层电流均匀分布的优化目标。最后，超导模型样缆载流特性实验也验证了优化设计方法的有效性。

Low-temperature performance and high-rate discharge capability of AB_5-type non-stoichiometric hydrogen storage alloy

Low-temperature performance and high-rate discharge capability of AB5-type non-stoichiometric hydrogen storage are studied. X-ray diffraction(XRD),pressure-composition-temperature(PCT) curves and electrochemical impedance spectroscopy(EIS) are applied to characterize the electrochemical properties of ABx(x=4.8,4.9,5.0,5.1,5.2) alloys. The results show that the non-stoichiometric alloys exhibit better electrochemical properties compared with that of the AB5 alloy.

High Temperature Superconducting Magnetic Energy Storage and Its Power Control Technology

High temperature superconducting （HTS） power inductor and its control technology have been studied and analyzed in the paper. Based on the results of simulations and practical experiments, a controlled release scheme has been proposed and verified for developing a practical HTS SMES prototype.

Using Parallel Packed Bed within a High Temperature Thermal Energy Storage System for CSP-Plants

In order to optimize the electricity yield of CSP （concentrated solar power） plants, TES （thermal energy storage） systems are regarded as an essential component. Furthermore, for many electricity grid operators, it is important to have spinning reserves in the grid and dispatchable power available, both offered by CSP-plants with integrated thermal energy storage. Enolcon is developing a new TES-system since several years. The system itself was designed to offer a principle simple and robust setup （with regard to execution and operation） and which is reducing the electricity costs of CSP-power plants by the consequent use of state of the art technology. Furthermore, such system shall be open to future developments of CSP-systems with regard to increasing steam temperatures and steam pressure. Such TES-system shall be commercially available for large scale application already in year 2014/2015. The key elements of the enolcon-TES are the open cycle using always ambient air with an air-air-heat exchanger and the arrangement of the storage material in such way to minimize the pressure losses and the own electricity consumption. The development is progressing in a structured way by studies, engineering works, TES-pilot plants, isothermal air flow test plant for the verification of the CFD-calculations, and since end of 2012 by the operation of a high temperature TES-module with all features of the large scale modules.

Transient multi-physics behavior of an insert high temperature superconducting no-insulation coil in hybrid superconducting magnets with inductive coupling

A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet during the charging and discharging processes.The coupled problem is resolved by means of the finite element method(FEM)for the magneto-thermo-elastic behaviors and the Runge-Kutta method for the transient responses of the electrical circuits of the hybrid superconducting magnet system.The results reveal that the transient multi-physics responses of the insert NI coil primarily depend on the charging/discharging procedure of the hybrid magnet.Moreover,a reverse azimuthal current and a compressive hoop stress are induced in the insert NI coil during the charging process,while a forward azimuthal current and a tensile hoop stress are observed during the discharging process.The induced voltages in the insert NI coil can drive the currents flowing across the radial turns where the contact resistance exists.Therefore,it brings forth significant Joule heat,causing a temperature rise and a uniform distribution of this heat in the coil turns.Accordingly,a thermally/mechanically unstable or quenching event may be encountered when a high operating current is flowing in the insert NI coil.It is numerically predicted that a quick charging will induce a compressive hoop stress which may bring a risk of buckling instability in the coil,while a discharging will not.The simulations provide an insight of hybrid superconducting magnets under transient start-up or shutdown phases which are inevitably encountered in practical applications.

High temperature polyimide nanocomposites containing twodimensional nanofillers for improved thermal stability and capacitive energy storage performance

Future electronic devices toward high integration and miniaturization demand reliable operation of dielectric materials at high electric fields and elevated temperatures.However,the electrical deterioration caused by Joule heat generation remains a persistent challenge to overcome.Here,the solution-processed polyimide(PI)nanocomposites with unique two-dimensional(2D)alumina nanoplates are reported.Substantial improvements in the breakdown strength,charge–discharge efficiency and discharged energy density at elevated temperatures have been demonstrated in the composites,owing to simultaneously suppressed conduction loss and increased thermal conductivity upon the incorporation of 2D Al_(2)O_(3) nanofillers possessing excellent dielectric insulation and thermophysical properties.The predominance of Al_(2)O_(3) nanoplates in enhancing thermal stability and high-temperature capacitive performance over nanoparticles and nanowires is validated experimentally and is further rationalized via finite element simulations.Notably,the Al_(2)O_(3) nanoplates filled PI nanocomposite exhibits a hightemperature capability up to 200℃ and remarkable efficiency(e.g.≥95% at 200 MV/m)over a wide temperature range,which outperforms commercial dielectric polymers and rivals the state-of-the-art polyimide nanocomposites.

HT-6M托卡马克加热场脉冲电源的设计

HT-6M托卡马克装置重建是为响应“一带一路”倡议的中泰合作国际项目,加热场脉冲电源的作用是击穿和产生等离子体,其电源方案采用电容储能脉冲放电形式。为计算出满足要求的电源参数,对加热场脉冲电源放电过程进行数学分析,并根据电源设备的工作参数,设计并研制了电源的核心器件。为验证电源放电过程的理论分析,研制了一套小型电容储能脉冲电源,证明理论分析正确性的同时,对电源大功率固态断路器进行关断实验。

Research progress on protective coatings against molten nitrate salts for thermal energy storage in concentrating solar power plants

Concentrating solar power(CSP) has garnered considerable global attention as a reliable means of generating bulk electricity, effectively addressing the intermittent nature of solar resources.The integration of molten salt technology for thermal energy storage(TES) has further contributed to the growth of CSP plants;however, the corrosive nature of molten salts poses challenges to the durability of container materials, necessitating innovative corrosion mitigation strategies.This review summarizes scientific advancements in high-temperature anticorrosion coatings for molten nitrate salts, highlighting the key challenges and future trends.It also explores various coating types, including metallic, ceramic, and carbon-based coatings, and compares different coating deposition methods.This review emphasizes the need for durable coatings that meet long-term performance requirements and regulatory limitations, with an emphasis on carbon-based coatings and emerging nanomaterials.A combination of multiple coatings is required to achieve desirable anticorrosion properties while addressing material compatibility and cost considerations.The overall goal is to advance the manufacturing, assembly, and performance of CSP systems for increased efficiency, reliability, and durability in various applications.

Effect of high-temperature buffer thickness on quality of AlN epilayer grown on sapphire substrate by metalorganic chemical vapor deposition

The effect of an initially grown high-temperature A1N buffer （HT-A1N） layer＇s thickness on the quality of an A1N epilayer grown on sapphire substrate by metalorganic chemical vapor deposition （MOCVD） in a two-step growth process is investigated. The characteristics of A1N epilayers are analyzed by using triple-axis crystal X-ray diffraction （XRD） and atomic force microscopy （AFM）. It is shown that the crystal quality of the A1N epilayer is closely related to its correlation length. The correlation length is determined by the thickness of the initially grown HT-A1N buffer layer. We find that the optimal HT-A1N buffer thickness for obtaining a high-quality A1N epilayer grown on sapphire substrate is about 20 nm.

Characterization of diamond MWCNTs composite fiber synthesized under high pressure and high temperature

A regrown composite fiber was synthesized during the sintering of diamond under high pressure 5.8 GPa and high temperature 1500℃for 1 min,using 3wt%MWCNTs as additive.SEM observation of the fiber after alkali and acid treatment revealed that the outer layer of the fiber is composed of nano-polycrystalline diamond.EDS,XPS,XRD and Raman spectrum analysis further identified that the fiber is composed of MWCNTs in the inner part and nano-polycrystalline diamond in the out layer.It is proposed that the untransformed MWCNTs may act as a template for the regrown outer layer of nano diamond fiber under high pressure and high temperature.

High Temperature Superconductivity in the Past Twenty Years Part 2——Towards to Practical Applications

After discovering high temperature superconducting materials 20 years ago, the preparation of applicable HTS materials has been pursued along with HTS mechanism and characteristic study. At present, the focus on the applied HTS technology has been moving to the industrial preparations from the laboratory research stage, and the technology has been well verified for practical applications from small to large scales. The fabrication techniques of engineering HTS materials are being industrialized; and various HTS devices are also on the way towards practical applications. This paper provides a comprehensive summary on the applied high temperature superconductivity with regard to various applicable HTS materials, their preparation techniques and charac- terization, and applications in a wide range.

Induced current of high temperature superconducting loops by combination of exciting coil and thermal switch

With its commercialization, the second-generation(2G) high temperature superconducting(HTS) RE–Ba–Cu–O(REBCO, RE is rare earth) tape is extensively applied to the superconducting magnets in the high magnetic fields. However,unlike low temperature superconducting(LTS) magnets, the HTS magnet cannot operate in the persistent current mode(PCM) due to the immature superconducting soldering technique. In this paper, an exciting method for two HTS sub-loops,so-called charging and load loops, is proposed by flux pump consisting of exciting coil and controllable thermal switch.Two HTS sub-loops are made of an REBCO tape with two slits. An exciting coil with iron core is located in one sub-loop and is supplied with a triangular waveform current so that magnetic field is generated in another sub-loop. The influence of magnetic flux on induced current in load loop is presented and verified in experiment at 77 K. The relationship between the induced magnetic flux density and the current on the sub-loops having been calibrated, magnetic flux density, and induced current are obtained. The results show that the HTS sub-loops can be excited by a coil with thermal switch and the induced current increases with magnetic flux of exciting coil increasing, which is promising for persistent current operation mode of HTS magnets.

Summary of the First Generation High Temperature Superconducting Wire: Processing, Characterization and Applications

Silver-clad （Bi,Pb）2Sr2Ca2Cu3O10＋x long wires produced by powder-in-tube techniques, which have been recognized as the first generation of the High Temperature Superconducting （HTS） wires, are expected to apply widely especially in strong current applications. In this work, the processing, characterization and application of the silver-clad （Bi,Pb）2Sr2Ca2Cu3Ol0＋x HTS wires are summarized. The HTS wires are fabricated using the combination of powder-in-tube technique, and the resulting wires are fully characterized by the means of chemical analyses, microstructural observation, electrical and magnetic measurements. The relationship among fabrication parameters, chemical and microstructural characteristics, and electrical and magnetic properties are analyzed. Applications of the HTS wires have also been introduced according to their strong current behaviors with various prototype devices made.

Announcing a Special Issue of the Journal of Electronic Science and Technology of China on High Temperature Superconductivity

Submission Deadline: 15 February 2008 Journal of Electronic Science and Technology of China (JESTC) invites manuscript submissions in the area of High Temperature Superconductivity (HTS). This special issue of JESTC will focus on recent experiment, theoretical, and application progress in HTS. It is intended to highlight and summarize the major developments that have occurred over the past few years. Topic scopes related to HTS to be covered include:

Announcing a Special Issue of the Journal of Electronic Science and Technology of China on High Temperature Superconductivity

Journal of Electronic Science and Technology of China (JESTC) invites manuscript submissions in the area of High Temperature Superconductivity (HTS). This special issue of

Announcing a Special Issue of the Journal of Electronic Science and Technology of China on High Temperature Superconductivity

Submission Deadline: 15 February 2008 Journal of Electronic Science and Technology of China (JESTC) invites manuscript

High-temperature energy storage dielectric with inhibition of carrier injection/migration based on band structure regulation

Dielectric capacitors have a high power density,and are widely used in military and civilian life.The main problem lies in the serious deterioration of dielectric insulation performance at high temperatures.In this study,a polycarbonate(PC)-based energy storage dielectric was designed with BN/SiO_(2)heterojunctions on its surface.Based on this structural design,a synergistic suppression of the carrier injection and transport was achieved,significantly improving the insulating properties of the polymer film.In particular,the composite film achieves optimal high-temperature energy-storage properties.The composite film can withstand an electric field intensity of 760 MV m^(-1)at 100℃and obtain an energy storage density of 8.32 J cm^(-3),while achieving a breakthrough energy storage performance even at 150℃(610 MV m^(-1),5.22 J cm^(-3)).Through adjustment of the heterojunction structure,free adjustment of the insulation performance of the material can be realized;this is of great significance for the optimization of the material properties.

各向异性衬底上的高温超导(HTS)微带天线

分析了各向异性衬底上的高温超导微带天线特性。选取两种典型的高温超导各向异性介质———GaNdA lO3和SrLaA lO4作为高温超导微带天线的衬底,采用各向异性媒质中的谱域矩量法,对微带天线的输入阻抗和辐射效率进行了计算。计算和分析结果表明,高温超导衬底的各向异性特性会影响高温超导微带天线的性能,而且这种影响因衬底而异,同时,衬底特性随温度的变化也将影响天线的性能。