TRANSIENT THERMAL RESPONSE IN THICK ORTHOTROPIC HOLLOW CYLINDERS WITH FINITE LENGTH:HIGH ORDER SHELL THEORY

The transient thermal response of a thick orthotropic hollow cylinder with finite length is studied by a high order shell theory. The radial and axial displacements are assumed to have quadratic and cubic variations through the thickness, respectively. It is important that the radial stress is approximated by a cubic expansion satisfying the boundary conditions at the inner and outer surfaces, and the corresponding strain should be least-squares compatible with the strain derived from the strain-displacement relation. The equations of motion are derived from the integration of the equilibrium equations of stresses, which are solved by precise integration method （PIM）. Numerical results are.obtained, and compared with FE simulations and dynamic thermo-elasticity solutions, which indicates that the high order shell theory is capable of predicting the transient thermal response of an orthotropic （or isotropic） thick hollow cylinder efficiently, and for the detonation tube of actual pulse detonation engines （PDE） heated continuously, the thermal stresses will become too large to be neglected, which are not like those in the one time experiments with very short time.

Kubelka-Munk Revised Theory for High Solar Reflectance and High Long-wave Emissivity Coatings Designing

The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is more than 200 μm,each colorant has enough covering power in visible and near-infrared spectral range.It can be assumed that the addition of colorants in coatings can only change the solar spectral absorption ratio rather than solar spectral scattering coefficient.The spectral scattering coefficient of coatings tends to a constant.The spectral absorption-scattering property of each colorant can be characterized through one parameter.The spectral absorption-scattering coefficient of coatings can be calculated with the multivariate linear relationship of each pigment.Moreover,the results can be expanded for high solar reflectivity and high long-wave emissivity coating preparation.The accuracy of Kubelka-Munk revised theory has been tested and verified through comparison between the calculated value and tested value of coating reflectance.

High Temperature Superconductivity in the Past Twenty Years Part 1——Discovery, Material, and Theory

Twenty years after the discovery of hightemperature superconductors （HTSs）, the HTS materials now have been well developed. Meanwhile the mechanism of superconductivity is still one of the topical interests in physics. The achievements made on HTS materials and theories during the last twenty years are reviewed comprehensively in this paper.

Theoretical Calculation about the High Energy Density Molecules of Nitrate Ester Substitution Derivatives of Prismane

The nitrate ester substitution derivatives of prismane were studied at the B3LYP/6-311G＊＊ level. The sublimation enthalpies and heats of formation in gas phase and solid state were calculated. The detonation performances were also predicted by using the famous Kamlet-Jacbos equation. Our calculated results show that introducing nitrate ester group into prismane is helpful to enhance its detonation properties. Stabilities were evaluated through the bond dissociation energies, bond order, characteristic heights（H50） and band gap calculations. The trigger bonds in the pyrolysis process of prismane derivatives were confirmed as O–ON2 bond. The BDEs of all compounds were large, so these prismane derivatives have excellent stability consistent with the results of H50 and band gap.

Focusing of elliptically polarized Gaussian beams through an annular high numerical aperture

Based on the vectorial Debye theory, the focusing properties of the Gaussian beam through an annular high numerical aperture are studied numerically, including the intensity, the phase and the orbital angular momentum properties. Then the influence of certain parameters on the focusing properties is also investigated. It is shown that sub-wavelength elliptical light spots can be obtained. And there exists a vortex in the longitudinal component of the focused field even though the incident beam is Gaussian beam, indicating that the spin angular momentum of the elliptically polarized Gaussian beam is converted into the orbital angular momentum by the focusing.

Design theory and experimental investigation of the low frequency and high power rare earth magnetostrictive flextensional transducer (Ⅰ). Theoretical part

The energy relationships among all the elements, by which the magnetostrictive transducers are manufactured, in Finite Element Method (FEM) are analyzed, then the expres- sions of FEM dynamics equations and performances formulas for magnetostrictive transducers are derived. The vibrating modes of the class VII transducer and its shell vibration are calcu- lated theoretically and the results point out that there is a breathing mode and if the transducer works at this mode, the transducer will vibrate with a greater volume speed and source level.

Design theory and experimental investigation of the low frequency and high power rare earth magnetostrictive flextensional transducer (Ⅱ). Experimental part

Vibrating modes of the manufactured flextensional transducer and its shell are experimentally investigated. The result are consistent with the theoretical calculations. The acoustical performances for the transducer are measured: resonance frequency is 1.16 kHz in the underwater, bandwidth is 680 Hz, mechanical quality factor is 1.71, transmitting current response is 186.1 dB, electromechanical efficiency is 13.1%.

Insight on Viscoelasticiy of Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 High Entropy Bulk Metallic Glass

High entropy bulk metallic glasses show promising mechanical and physical properties.Dynamic mechanical properties of Ti_（16.7）Zr_（16.7）Hf_（16.7）Cu_（16.7）Ni_（16.7）Be_（16.7）high entropy bulk metallic glass were investigated by mechanical spectroscopy（or called dynamic mechanical analysis）.The main（α）relaxation was observed in the framework of the loss modulus G″,which is related to the dynamic glass transition behaviour for the glassy materials.From physical model point of view,dynamic mechanical properties of the Ti_（16.7）Zr_（16.7）Hf_（16.7）Cu_（16.7）Ni_（16.7）Be_（16.7）high entropy bulk metallic glass show good agreement compared with the quasi-point defects theory.